RESUMO
Prussian blue analogs (PBAs) as insertion-type cathodes have attracted significant attention in various aqueous batteries to accommodate metal or non-metal ions while suffering from serious dissolution and consequent inferior lifespan. Herein, we reveal that the dissolution of PBAs primarily originates from the locally elevated pH of electrolytes that are caused by proton co-insertion during discharge. To address this issue, a water-locking electrolyte (WLE) has been strategically implemented, which interrupts the generation and Grotthuss diffusion of protons by breaking the well-connected hydrogen bonding network in aqueous electrolytes. As a result, the WLE enables the iron hexacyanoferrate to endure over 1000 cycles at a 1C rate and supports a high-voltage decoupled cell with an average voltage of 1.95 V. These findings provide insights for mitigating dissolution problems in electrode materials, thereby enhancing the viability and performance of aqueous batteries.
RESUMO
Hydronium ions have been reversibly stored for the first time in an electrode of crystalline 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA). A highly reversible discharge-charge behavior of PTCDA was observed in an aqueous acidic electrolyte of 1 m H2 SO4 . The capacity and the operation potentials are comparable to that of Na-ion storage in the same electrode.
RESUMO
To recycle rusty stainless-steel meshes (RSSM) and meet the urgent requirement of developing high-performance cathodes for potassium-ion batteries (KIB), we demonstrate a new strategy to fabricate flexible binder-free KIB electrodes via transformation of the corrosion layer of RSSM into compact stack-layers of Prussian blue (PB) nanocubes (PB@SSM). When further coated with reduced graphite oxide (RGO) to enhance electric conductivity and structural stability, the low-cost, stable, and binder-free RGO@PB@SSM cathode exhibits excellent electrochemical performances for KIB, including high capacity (96.8â mAh g-1 ), high discharge voltage (3.3â V), high rate capability (1000â mA g-1 ; 42 %â capacity retention), and outstanding cycle stability (305â cycles; 75.1 %â capacity retention).
RESUMO
Aqueous Zn-based batteries deliver thousands of cycles at high rates but poor recyclability at low rates. Herein, we reveal that this illogical phenomenon is attributed to the reconstructed electrode/electrolyte interface at high rates, wherein the condensed electrical double layer (EDL) and the tightly absorbed Zn2+ ions on the Zn electrode surface afford compact and corrosion-resistant Zn deposits.
RESUMO
Aqueous batteries have been considered as the most promising alternatives to the dominant lithium-based battery technologies because of their low cost, abundant resources and high safety. The output voltage of aqueous batteries is limited by the narrow stable voltage window of 1.23 V for water, which theoretically impedes further improvement of their energy density. However, the pH-decoupling electrolyte with an acidic catholyte and an alkaline anolyte has been verified to broaden the operating voltage window of the aqueous electrolyte to over 3 V, which goes beyond the voltage limitations of the aqueous batteries, making high-energy aqueous batteries possible. In this Review, we summarize the latest decoupled aqueous batteries based on pH-decoupling electrolytes from the perspective of ion-selective membranes, competitive redox couples and potential battery prototypes. The inherent defects and problems of these decoupled aqueous batteries are systematically analysed, and the critical scientific issues of this battery technology for future applications are discussed.
RESUMO
Alkaline Zn-MnO2 batteries feature high security, low cost, and environmental friendliness while suffering from severe electrochemical irreversibility for both the Zn anode and MnO2 cathode. Although neutral electrolytes are supposed to improve the reversibility of the Zn anode, the MnO2 cathode indeed experiences a capacity degradation caused by the Jahn-Teller effect of the Mn3+ ion, thus shortening the lifespan of the neutral Zn-MnO2 batteries. Theoretically, the MnO2 cathode undergoes a highly reversible two-electron redox reaction of the MnO2/Mn2+ couple in strongly acidic electrolytes. However, acidic electrolytes would inevitably accelerate the corrosion of the Zn anode, making long-lived acidic Zn-MnO2 batteries impossible. Herein, to overcome the challenges faced by Zn-MnO2 batteries, we propose a hybrid Zn-MnO2 battery (HZMB) by coupling the neutral Zn anode with the acidic MnO2 cathode, wherein the neutral anode and acidic cathode are separated by a proton-shuttle-shielding and hydrophobic-ion-conducting membrane. Benefiting from the optimized reaction conditions for both the MnO2 cathode and Zn anode as well as the well-designed membrane, the HZMB exhibits a high working voltage of 2.05 V and a long lifespan of 2275 h (2000 cycles), breaking through the limitations of Zn-MnO2 batteries in terms of voltage and cycle life.
RESUMO
With the rapid development of wearable and portable electronics, flexible and stretchable energy storage devices to power them are rapidly emerging. Among numerous flexible energy storage technologies, flexible batteries are considered as the most favorable candidate due to their high energy density and long cycle life. In particular, flexible 1D batteries with the unique advantages of miniaturization, adaptability, and weavability are expected to be a part of such applications. The development of 1D batteries, including lithium-ion batteries, zinc-ion batteries, zinc-air batteries, and lithium-air batteries, is comprehensively summarized, with particular emphasis on electrode preparation, battery design, and battery properties. In addition, the remaining challenges to the commercialization of current 1D batteries and prospective opportunities in the field are discussed.
RESUMO
To meet the increasing demands for portable and flexible devices in a rapidly developing society, it is urgently required to develop highly safe and flexible electrochemical energy-storage systems. Flexible lithium-oxygen batteries with high theoretical specific energy density are promising candidates; however, the conventional half-open structure design prevents it from working properly under water or fire conditions. Herein, as a proof-of-concept experiment, a highly safe flexible lithium-oxygen battery achieved by the synergy of a vital multifunctional structure design and a unique composite separator is proposed and fabricated. The structure can effectively prevent the invasion of water from the environment and combustion, which is further significantly consolidated with the help of a polyimide and poly(vinylidene fluoride-co-hexafluoropropylene) composite separator, which holds good water resistance, thermal stability, and ionic conductivity. Unexpectedly, the obtained lithium-oxygen battery exhibits superior flexibility, water resistance, thermal resistance, and cycling stability (up to 218 cycles; at a high current of 1 mA and capacity of 4 mA h). This novel water/fireproof, flexible lithium-oxygen battery is a promising candidate to power underwater flexible electronics.
RESUMO
SnSe with 3D hierarchical nanostructure composed of interconnected single-crystal SnSe nanosheets is synthesized via a fast and effective strategy. Unexpectedly, when used as the anode material for Na-ion batteries (NIBs), the SnSe exhibits a high capacity (738 mA h g-1 ), superior rate capability (40 A g-1 ), and high energy density in a full cell. These results provide the possibility of SnSe use as NIBs anodes.
RESUMO
To turn waste into treasure, a facile and cost-effective strategy is developed to revive electroless nickel plating wastewater and cotton-textile waste toward a novel electrode substrate. Based on the substrate, a binder-free PB@GO@NTC electrode is obtained, which exhibits superior electrochemical performance. Moreover, for the first time, a novel tube-type flexible and wearable sodium-ion battery is successfully fabricated.
RESUMO
Development of an anode material with high performance and low cost is crucial for implementation of next-generation Na-ion batteries (NIBs) electrode, which is proposed to meet the challenges of large scale renewable energy storage. Metal chalcogenides are considered as promising anode materials for NIBs due to their high theoretical capacity, low cost, and abundant sources. Unfortunately, their practical application in NIBs is still hindered because of low conductivity and morphological collapse caused by their volume expansion and shrinkage during Na(+) intercalation/deintercalation. To solve the daunting challenges, herein, we fabricated novel three-dimensional (3D) Cu2NiSnS4 nanoflowers (CNTSNs) as a proof-of-concept experiment using a facile and low-cost method. Furthermore, homogeneous integration with reduced graphene oxide nanosheets (RGNs) endows intrinsically insulated CNTSNs with superior electrochemical performances, including high specific capacity (up to 837 mAh g(-1)), good rate capability, and long cycling stability, which could be attributed to the unique 3D hierarchical structure providing fast ion diffusion pathway and high contact area at the electrode/electrolyte interface.
RESUMO
GC-ECD methods were adopted to determine the residual level of OCPs (including HCHs and DDTs) and PCBs in the surface sediments collected from mudflat shellfish culturing areas in Ningbo, with the sources of the OCPs and PCBs analyzed and the ecological risks of the residual OCPs and PCBs evaluated. The residual level of OCPs was 0.80-32.40 ng X g(-1), and that of PCBs was 3.20-33.33 ng X g(-1). The HCHs mainly came from long distance atmospheric transportation and historical residues, while the DDTs had new input at some sites, possibly coming from the application of dicofol. At most sites, there existed potential ecological risks of p, p'-DDT and DDTs, with strong indications in Qiangtou and Xidian where the residual level of p, p'-DDT was higher than the effect rang median (ERM), suggesting an ecological menace to the benthos. The residual PCBs at most sites were in low level ecological risk.