RESUMO
Materials with various single-transition metal atoms dispersed in nitrogenated carbons (MâNâC, M = Fe, Co, and Ni) are synthesized as cathodes to investigate the electrocatalytic behaviors focusing on their enhancement mechanism for performance of Li-S batteries. Results indicate that the order of both electrocatalytic activity and rate capacity for the MâNâC catalysts is Co > Ni > Fe, and the CoâNâC delivers the highest capacity of 1100 mAh g-1 at 1 C and longtime stability at a decay rate of 0.05% per cycle for 1000 cycles, demonstrating excellent battery performance. Theoretical calculations for the first time reveal that MâNâNâC catalysts enable direct conversion of Li2 S6 to Li2 S rather than Li2 S4 to Li2 S by stronger adsorption with Li2 S6 , which also has an order of Co > Ni > Fe. And CoâNâC has the strongest adsorption energy, not only rendering the highest electrocatalytic activity, but also depressing the polysulfides' dissolution into electrolyte for the longest cycle life. This work offers an avenue to design the next generation of highly efficient sulfur cathodes for high-performance Li-S batteries, while shedding light on the fundamental insight of single metal atomic catalytic effects on Li-S batteries.
RESUMO
Y6 derivatives with asymmetric terminal groups have attracted considerable attention in recent years. However, the effects of the asymmetric modification of terminal groups on the photovoltaic performance of Y6 derivatives are not well understood yet. Therefore, we designed a series of Y6-based acceptors with asymmetric terminal groups by endowing them with various electron-withdrawing abilities and different conjugated rings to conduct systematic research. The electron-withdrawing ability of the Y6-D1 terminal group (substituted by IC-2F and IC-2NO2 terminals) is strongest, followed by Y6 (substituted by two same IC-2F terminals), Y6-D2 (substituted by IC-2F and 2-(4-oxo-4,5-dihydro-6H-cyclopenta[b]thiophen-6-ylidene)malononitrile terminals), Y6-D4 (substituted by IC-2F and indene ring), and Y6-D3 (substituted by IC-2F and thiazole ring). Computed results show that A-A stacking is the main molecular packing mode of Y6 and four other asymmetric Y6 derivatives. The ratios of A-A stacking face-on configuration of Y6-D1, Y6-D2, Y6-D3, Y6-D4, and Y6 are 51.6%, 55.0%, 43.5%, 59.3%, and 62.4%, respectively. Except for Y6-D1 substituted by the IC-2F and IC-2NO2 (the strongest electron-withdrawing capacity) terminal groups, the other three asymmetric molecules are mainly electron-transporting and can therefore act as acceptors. The open-circuit voltages of organic solar cells (OSCs) based on Y6-D2, Y6-D3, and Y6-D4, except for Y6-D1, may be higher than those of OSCs based on the Y6 acceptor because of their higher energy levels of lowest unoccupied molecular orbital (LUMO). PM6/Y6-D3 and PM6/Y6-D4 have better light absorption properties than PM6/Y6 due to their higher total oscillator strength. These results indicate that Y6-D3 and Y6-D4 can be employed as good acceptors.
Assuntos
Bandagens , Elétrons , Transporte de Elétrons , Tiazóis , TiofenosRESUMO
Single-atom catalysis is mainly focused on its dispersed high-density catalytic sites, but delicate designs to realize a unique catalysis mechanism in terms of target reactions have been much less investigated. Herein an iron single atomic site catalyst anchored on 2-D N-doping graphene (Fe-SASC/G) was synthesized and further employed as a biomimetic sensor to electrochemically detect hydrogen peroxide, showing an extremely high sensitivity of 3214.28 µA mM-1 cm-2, which is much higher than that (6.5 µA mM-1 cm-2) of its dispersed on 1-D carbon nanowires (Fe-SASC/NW), ranking the best sensitivity among all reported Fe based catalyst at present. The sensor was also used to successfully in situ monitor H2O2 released from A549 living cells. The mechanism was further systematically investigated. Results interestingly indicate that the distance between adjacent single Fe atomic catalytic sites on 2-D graphene of Fe-SASC/G matches statistically well with the outer length of bioxygen of H2O2 to promote a bridge adsorption of -O-O- for simultaneous 2-electron transfer, while the single Fe atoms anchored on distant 1-D nanowires in Fe-SASC/NW only allow an end-adsorption of oxygen atoms for 1-electron transfer. These results demonstrate that Fe-SASC/G holds great promise as an advanced electrode material in selective and sensitive biomimetic sensor and other electrocatalytic applications, while offering scientific insights in deeper single atomic catalysis mechanisms, especially the effects of substrate dimensions on the mechanism.
Assuntos
Grafite , Adsorção , Biomimética , Carbono , Peróxido de Hidrogênio , Ferro , OxigênioRESUMO
OBJECTIVE: To identify pathogenic variants in two patients with suspected for Mowat-Wilson syndrome (MWS). METHODS: Genomic DNA was extracted from peripheral blood samples of the patients and his family members, and gene variants were analysis by Trio-whole exome sequences and copy number variation sequencing. RESULTS: Patient 1 was found to carried a de novo heterozygous c.2769C>A (p.Y923*) nonsense variant of ZEB2 gene. The variant was not found in his healthy parents and sister. Patient 2 carried a de novo heterozygous frameshift variant of the ZEB2 gene, namely c.315delC (p.A105Afs*3), which has not been previously reported. Both variants were predicted to be pathogenic and can lead to premature occurrence of stop codons. CONCLUSION: The heterozygous c.2769C>A (p.Y923*) and c.315delC (p.A105Afs*3) variants of the ZEB2 gene probably underlay the pathogenesis in the two patients. Gene testing has facilitated confirmation of the diagnosis and genetic counselling.
Assuntos
Deficiência Intelectual , Microcefalia , Variações do Número de Cópias de DNA , Fácies , Doença de Hirschsprung , Humanos , Deficiência Intelectual/genética , Microcefalia/genética , Homeobox 2 de Ligação a E-box com Dedos de Zinco/genéticaRESUMO
Single-atom catalysis efficiently exposes the catalytic sites to reactant molecules while rendering opportunity to investigate the catalysis mechanisms at atomic levels for scientific insights. Here, for the first time, atomically dispersed Co atoms are synthesized as biomimetic "enzymes" to monitor superoxide anions (O2â¢-), delivering ultraordinary high sensitivity (710.03 µA·µM-1·cm-2), low detection limit (1.5 nM), and rapid response time (1.2 s), ranking the best among all the reported either bioenzymatic or biomimetic O2â¢- biosensors. The sensor is further successfully employed to real-time monitor O2â¢- released from living cells. Moreover, theoretical calculation and analysis associated with experimental results discover that a mode of end adsorption of the negatively charged O2â¢- on the Co3+ atom rather than a bridge or/and side adsorption of the two atoms of O2â¢- on two Co3+ atoms, respectively, plays an important role in the single-atomic catalysis toward O2â¢- oxidation, which not only facilitates faster electron transfer but also offers better selectivity. This work holds great promise for an inexpensive and sensitive atomic biomimetic O2â¢- sensor for bioresearch and clinic diagnosis, while revealing that the adsorption mode plays a critical role in single-atom catalysis for a fundamental insight.
Assuntos
Técnicas Biossensoriais , Adsorção , Catálise , Oxirredução , SuperóxidosRESUMO
BACKGROUND: More than 11 million people were estimated to have been infected by Schistosoma japonicum in China before the 1950s. However, few studies have been conducted to evaluate the longitudinal effects of previous schistosome infection (PSI). OBJECTIVE: We aimed to evaluate the association of PSI with fatty liver and coronary heart disease in China. METHODS: A cross-sectional study was conducted in regions which were all reportedly heavily endemic for S japonicum in China. All data were collected using a questionnaire administered and health examinations by well-trained medical professionals. 2867 participants aged 40 years and older were enrolled. Among these, 731 patients with PSI were selected as study subjects and 2136 subjects served as controls. Comparisons between groups were performed with or without an adjustment for a covariate, using Student's t tests for continuous variables and chi-square testing for categorical variables. Multivariable logistic models were used to estimate the associations between PSI and fatty liver or coronary heart disease. RESULTS: The PSI participants had significantly lower levels of triglyceride, low-density lipoprotein cholesterol, fasting blood glucose, uric acid, serum creatinine, urea nitrogen, platelet, total protein and globulin as well as a lower prevalence of fatty liver (13.3% vs 53.6%, P < .001) and coronary heart disease (3.4% vs 6.0%, P < .05) compared with the uninfected, contemporaneous controls (without PSI), whereas the PSI participants had higher levels of high-density lipoprotein cholesterol, direct bilirubin and a higher prevalence of hepatic dysfunction compared with those without PSI (P < .05). CONCLUSION: We found PSI significantly negatively associated with fatty liver and coronary heart disease. However, further studies on schistosomiasis may provide new directions for prevention and treatment of fatty liver and coronary heart disease.
Assuntos
Doença das Coronárias/complicações , Fígado Gorduroso/complicações , Esquistossomose/complicações , Adulto , Idoso , China/epidemiologia , Doença das Coronárias/epidemiologia , Estudos Transversais , Fígado Gorduroso/epidemiologia , Humanos , Modelos Logísticos , Pessoa de Meia-Idade , Esquistossomose/epidemiologia , Inquéritos e QuestionáriosRESUMO
Life cycle assessment (LCA) is conducive to the change in the wind power industry management model and is beneficial to the green design of products. Nowadays, none of the LCA systems are for wind turbines and the concept of Internet of Things (IoT) in LCA is quite a new idea. In this paper, a four-layer LCA platform of wind turbines based on IoT architecture is designed and discussed. In the data transmission layer, intelligent sensing of wind turbines can be achieved and their status and location can be monitored. In the data transmission layer, the LCA platform can be effectively integrated with enterprise information systems through the object name service (ONS) and directory service (DS). In the platform layer, a model based on IMPACT 2002+ is developed, and four management modules are designed. In the application layer, different from other systems, energy payback time (EPBT) is selected as an important evaluation index for wind turbines. Compared with the existing LCA systems, the proposed system is specifically for wind turbines and can collect data in real-time, leading to improved accuracy and response time.
RESUMO
With the swift growth in commerce and transportation in the modern civilization, much attention has been paid to air quality monitoring, however existing monitoring systems are unable to provide sufficient spatial and temporal resolutions of the data with cost efficient and real time solutions. In this paper we have investigated the issues, infrastructure, computational complexity, and procedures of designing and implementing real-time air quality monitoring systems. To daze the defects of the existing monitoring systems and to decrease the overall cost, this paper devised a novel approach to implement the air quality monitoring system, employing the edge-computing based Internet-of-Things (IoT). In the proposed method, sensors gather the air quality data in real time and transmit it to the edge computing device that performs necessary processing and analysis. The complete infrastructure & prototype for evaluation is developed over the Arduino board and IBM Watson IoT platform. Our model is structured in such a way that it reduces the computational burden over sensing nodes (reduced to 70%) that is battery powered and balanced it with edge computing device that has its local data base and can be powered up directly as it is deployed indoor. Algorithms were employed to avoid temporary errors in low cost sensor, and to manage cross sensitivity problems. Automatic calibration is set up to ensure the accuracy of the sensors reporting, hence achieving data accuracy around 75â»80% under different circumstances. In addition, a data transmission strategy is applied to minimize the redundant network traffic and power consumption. Our model acquires a power consumption reduction up to 23% with a significant low cost. Experimental evaluations were performed under different scenarios to validate the system's effectiveness.
RESUMO
OBJECT: In this study, we aimed to elucidate the role of LUCAT1, a recently identified lncRNA, in ferroptosis within the context of bladder cancer (BC). METHODS: Through a comprehensive array of experimental techniques, including transmission electron microscopy (TEM), RNA pull-down assays, and fluorescence in situ hybridization (FISH), we investigated the molecular interactions and functional consequences associated with LUCAT1 in BC cells. RESULTS: Our findings indicate that LUCAT1 acts as a pivotal regulator in BC, fostering cell proliferation, migration, and invasion, while concurrently impeding ferroptosis. Mechanistically, we unveiled a direct binding between LUCAT1 and insulin-like growth factor 2 mRNA-binding protein 1 (IGF2BP1), which governs the mRNA stability of signal transducer and activator of transcription 3 (STAT3). Intriguingly, ectopic expression of STAT3 counteracted the suppressive effect of LUCAT1 on ferroptosis induction in BC cells. Notably, in an in vivo setting, LUCAT1 emerged as a crucial modulator of ferroptosis inhibition in BC by regulating STAT3 mRNA stability. CONCLUSION: Collectively, our study identifies LUCAT1 as a novel oncogenic player, repressing ferroptosis in BC. These findings shed light on the intricate interplay between lncRNAs and ferroptosis in cancer, implicating LUCAT1 as a promising therapeutic target for patients afflicted with BC. Further investigations into the underlying mechanisms governing LUCAT1-mediated ferroptosis resistance are warranted, with the potential to uncover novel strategies for combating BC progression and improving patient outcomes.
Assuntos
Ferroptose , MicroRNAs , RNA Longo não Codificante , Neoplasias da Bexiga Urinária , Humanos , Linhagem Celular Tumoral , Proliferação de Células/genética , Ferroptose/genética , Regulação Neoplásica da Expressão Gênica , Hibridização in Situ Fluorescente , MicroRNAs/genética , Estabilidade de RNA , RNA Longo não Codificante/genética , RNA Longo não Codificante/metabolismo , Fator de Transcrição STAT3/genética , Fator de Transcrição STAT3/metabolismo , Neoplasias da Bexiga Urinária/genéticaRESUMO
Bladder cancer (BC) is one of the most common malignancies in the male urinary system and currently lacks an optimal treatment strategy. To elucidate the pathogenic mechanisms of BC from the perspective of circular RNAs, we conducted this study. Building upon our previous research, a novel circRNA, circPKN2, captured our interest due to its significant downregulation in BC, and its close association with the prognosis of BC patients. Our research findings indicate that circPKN2 can inhibit the proliferation and migration of BC cells in vitro. Furthermore, we discovered that circPKN2 exerts its anti-cancer effects in BC by promoting ferroptosis. Mechanistic studies revealed that circPKN2 recruits STUB1 to facilitate the ubiquitination of SCD1, thereby suppressing the WNT pathway and promoting ferroptosis in BC. Additionally, our research unveiled the regulatory role of the splicing factor QKI in the biogenesis of circPKN2. Animal studies demonstrated that circPKN2 enhances ferroptosis in BC cells in vivo, inhibiting tumor growth and metastasis. The discovery of the anti-cancer factor circPKN2 holds promise for providing new therapeutic targets in the prevention and treatment of BC.
Assuntos
Ferroptose , RNA Circular , Estearoil-CoA Dessaturase , Ubiquitinação , Neoplasias da Bexiga Urinária , Ferroptose/genética , Humanos , Neoplasias da Bexiga Urinária/genética , Neoplasias da Bexiga Urinária/patologia , Neoplasias da Bexiga Urinária/metabolismo , RNA Circular/genética , RNA Circular/metabolismo , Camundongos , Animais , Estearoil-CoA Dessaturase/genética , Estearoil-CoA Dessaturase/metabolismo , Masculino , Linhagem Celular Tumoral , Proliferação de Células , Regulação Neoplásica da Expressão Gênica , Camundongos NusRESUMO
This paper presents a reconfigurable near-sensor anomaly detection processor to real-time monitor the potential anomalous behaviors of amputees with limb prostheses. The processor is low-power, low-latency, and suitable for equipment on the prostheses and comprises a reconfigurable Variational Autoencoder (VAE), a scalable Self-Organizing Map (SOM) Array, and a window-size-adjustable Markov Chain, which can implement an integrated miniaturized anomaly detection system. With the reconfigurable VAE, the proposed processor can support up to 64 sensor sampling channels programmable by global configuration, which can meet the anomaly detection requirements in different scenarios. A scalable SOM array allows for the selection of different sizes based on the complexity of the data. Unlike traditional time accumulation-based anomaly detection methods, the Markov Chain is utilized to detect time-series-based anomalous data. The processor is designed and fabricated in a UMC 40-nm LP technology with a core area of 1.49 mm2 and a power consumption of 1.81 mW. It achieves real-time detection performance with 0.933 average F1 Score for the FSP dataset within 24.22 µs, and 0.956 average F1 Score for the SFDLA-12 dataset within 30.48 µs, respectively. The energy dissipation of detection for each input feature is 43.84 nJ with the FSP dataset, and 55.17 nJ with the SFDLA-12 dataset. Compared with ARM Cortex-M4 and ARM Cortex-M33 microcontrollers, the processor achieves energy and area efficiency improvements ranging from 257×, 193× and 11×, 8×, respectively.
RESUMO
A W-doped Pt modified graphene oxide (Pt-W-GO) electrochemical microelectrode was developed to detect hydrogen peroxide (H2O2) in real time at a subcellular scale. Interestingly, results showed that the concentration of H2O2 in the nucleus of HeLa cells was 2.68 times and 0.51 times that in the extracellular membrane and cytoplasm, respectively.
Assuntos
Técnicas Eletroquímicas , Grafite , Peróxido de Hidrogênio , Microeletrodos , Platina , Peróxido de Hidrogênio/análise , Peróxido de Hidrogênio/química , Humanos , Células HeLa , Platina/química , Grafite/químicaRESUMO
Associative memory is a cornerstone of cognitive intelligence within the human brain. The Bayesian confidence propagation neural network (BCPNN), a cortex-inspired model with high biological plausibility, has proven effective in emulating high-level cognitive functions like associative memory. However, the current approach using GPUs to simulate BCPNN-based associative memory tasks encounters challenges in latency and power efficiency as the model size scales. This work proposes a scalable multi-FPGA high performance computing (HPC) architecture designed for the associative memory system. The architecture integrates a set of hypercolumn unit (HCU) computing cores for intra-board online learning and inference, along with a spike-based synchronization scheme for inter-board communication among multiple FPGAs. Several design strategies, including population-based model mapping, packet-based spike synchronization, and cluster-based timing optimization, are presented to facilitate the multi-FPGA implementation. The architecture is implemented and validated on two Xilinx Alveo U50 FPGA cards, achieving a maximum model size of 200×10 and a peak working frequency of 220 MHz for the associative memory system. Both the memory-bounded spatial scalability and compute-bounded temporal scalability of the architecture are evaluated and optimized, achieving a maximum scale-latency ratio (SLR) of 268.82 for the two-FPGA implementation. Compared to a two-GPU counterpart, the two-FPGA approach demonstrates a maximum latency reduction of 51.72× and a power reduction exceeding 5.28× under the same network configuration. Compared with the state-of-the-art works, the two-FPGA implementation exhibits a high pattern storage capacity for the associative memory task.
RESUMO
Metal-organic frameworks (MOFs) have been used to detect uric acid (UA), but still very challenging to achieve a low detection limit due to the low inferior conductivity of MOFs. Herein, three different N-doped ZIF-67-derived carbons were synthesized for the first time by one-step co-pyrolysis of 2-methylimidazole with cobalt nitrate (CN), cobalt acetate (CA) or cobalt chloride (CC) toward UA sensing. Afterwards, the cobalt nitrate-derived Co particle (Co/CN) supported by N-doped ZIF-67-derived carbon displays extremely low detection limit and high sensitivity for UA, outperformed all reported MOFs-based UA sensors. More interestingly, it was discovered that the high valence Co4+ within the Co/CN sample produced in high-acidic environment can intercalate in the frame for a bridge adsorption between two reaction sites, which boosted simultaneous 2-electron transfer, while Co3+ only allows an end-adsorption structure for one-electron transfer being the rate determining step. Furthermore, the bridge adsorption mode of UA on Co4+ -based catalyst was also verified by theoretical DFT calculations and XPS experiment. This work holds great promise for a selective and sensitive UA sensor for practical bioscience and clinic diagnostic applications while shedding lights in fundamental research for innovative designs and developments of high-sensitive electrochemical sensors.
RESUMO
OBJECTIVE: To investigate the clinical efficacy of the combined application of blistering cupping with thunder-fire moxibustion in treating bronchial asthma of cold-wheezing syndrome, and its influences on airway remodeling, inflammatory factors, lung function, and quality of life on the base of conventional western medicine treatment. METHODS: A total of 76 patients with bronchial asthma of cold-wheezing syndrome were randomly divided into an observation group and a control group, 38 cases in each group. In the control group, the basic treatment was used, i.e. budesonide formoterol powder inhalation. In the observation group, on the basis of the treatment as the control group, blistering cupping combined with thunder-fire moxibustion was supplemented, Dazhui (GV 14), Danzhong (CV 17) and bilateral Feishu (BL 13), Gaohuang (BL 43), and Zhongfu (LU 1) were selected; blistering cupping was administered once a day and thunder-fire moxibustion was given twice a day. One course of treatment was composed of 7 days in both groups, and 2 courses of treatment were required. Before and after treatment, the airway remodeling indexes (matrix metalloproteinase-9 [MMP-9], tissue inhibitor of matrix metalloproteinase-1 [TIMP-1], and transforming growth factor-ß1 [TGF-ß1]) and inflammatory indexes (interleukin [IL] -1ßãIL-25) were detected by using radioimmunoassay in the patients of the two groups. The lung function, traditional Chinese medicine symptom score, and asthma quality of life questionnaire (AQLQ) score were observed in the patients of the two groups. RESULTS: After treatment, the serum levels of MMP-9, TIMP-1, TGF-ß1, IL-1ß, IL-25, peak expiratory flow (PEFR), traditional Chinese medicine symptom scores, and AQLQ scores were decreased compared with those before treatment in the patients of the two groups (P<0.05), and the results in the observation group were lower than those in the control group (P<0.05). After treatment, the first second forced expiratory volume (FEV1) and peak expiratory flow rate (PEF) were increased compared with those before treatment in the two groups (P<0.05), and the results in the observation group were higher than those in the control group (P<0.05). CONCLUSION: On the basis of the conventional western medicine treatment, the combination of blistering cupping with thunder-fire moxibustion can effectively ameliorate the clinical symptoms of patients, reduce inflammatory levels, inhibit airway remodeling and improve the lung function and quality of life in the patients with bronchial asthma.
Assuntos
Asma , Moxibustão , Humanos , Remodelação das Vias Aéreas , Sons Respiratórios , Metaloproteinase 9 da Matriz , Fator de Crescimento Transformador beta1 , Qualidade de Vida , Inibidor Tecidual de Metaloproteinase-1 , Asma/terapiaRESUMO
Because contractions signal the approach of labor, pregnant women-especially primigravidas (i.e., women pregnant for the first time)-usually go to the hospital to seek medical intervention when they begin experiencing contractions, which is not conductive to good perinatal outcomes. Conventionally, uterine contraction monitoring requires specialized medical devices and relies on the doctor's clinical experience. Therefore, exploring an objective method to detect labor onset at home and avoid early hospital admission has essential importance. In this article, a labor progress monitoring system based on a sensing device, edge service, and Internet of things (IoT) platform is proposed, aiming to suggest suitable hospital admission times for low-risk primigravidas. The pregnant woman places the sensing device on her abdomen with the help of a belt to detect contraction activities. An intelligent edge service for contraction classification is deployed on a mobile phone. The system's artificial intelligence (AI)-assisted algorithm is lightweight, with 670 kB and 194 kB of memory dedicated to a convolutional neural network and long short-term memory, respectively. It classifies the pregnant woman as deferred admission, optional admission, or recommended admission according to different contraction states. An IoT platform connected to the hospital is implemented, providing professional suggestions from doctors. The test set collected in an emergency clinic shows that the proposed system can reach a classification accuracy of more than 96%. In conclusion, the proposed system enables remote labor progress monitoring at home and avoids early hospital admission.
Assuntos
Internet das Coisas , Dispositivos Eletrônicos Vestíveis , Humanos , Feminino , Gravidez , Inteligência Artificial , Monitorização Fisiológica/métodos , HospitaisRESUMO
Objective: The multi-subject brain-computer interface (mBCI) is becoming a key tool for the analysis of group behaviors. It is necessary to adopt a neural recording system for collaborative brain signal acquisition, which is usually in the form of a fixed wire. Approach: In this study, we designed a wireless group-synchronized neural recording system that supports real-time mBCI and event-related potential (ERP) analysis. This system uses a wireless synchronizer to broadcast events to multiple wearable EEG amplifiers. The simultaneously received broadcast signals are marked in data packets to achieve real-time event correlation analysis of multiple targets in a group. Main results: To evaluate the performance of the proposed real-time group-synchronized neural recording system, we conducted collaborative signal sampling on 10 wireless mBCI devices. The average signal correlation reached 99.8%, the amplitude of average noise was 0.87 µV, and the average common mode rejection ratio (CMRR) reached 109.02 dB. The minimum synchronization error is 237 µs. We also tested the system in real-time processing of the steady-state visual-evoked potential (SSVEP) ranging from 8 to 15.8 Hz. Under 40 target stimulators, with 2 s data length, the average information transfer rate (ITR) reached 150 ± 20 bits/min, and the highest reached 260 bits/min, which was comparable to the marketing leading EEG system (the average: 150 ± 15 bits/min; the highest: 280 bits/min). The accuracy of target recognition in 2 s was 98%, similar to that of the Synamps2 (99%), but a higher signal-to-noise ratio (SNR) of 5.08 dB was achieved. We designed a group EEG cognitive experiment; to verify, this system can be used in noisy settings. Significance: The evaluation results revealed that the proposed real-time group-synchronized neural recording system is a high-performance tool for real-time mBCI research. It is an enabler for a wide range of future applications in collaborative intelligence, cognitive neurology, and rehabilitation.
RESUMO
The memristor has been extensively used to facilitate the synaptic online learning of brain-inspired spiking neural networks (SNNs). However, the current memristor-based work can not support the widely used yet sophisticated trace-based learning rules, including the trace-based Spike-Timing-Dependent Plasticity (STDP) and the Bayesian Confidence Propagation Neural Network (BCPNN) learning rules. This paper proposes a learning engine to implement trace-based online learning, consisting of memristor-based blocks and analog computing blocks. The memristor is used to mimic the synaptic trace dynamics by exploiting the nonlinear physical property of the device. The analog computing blocks are used for the addition, multiplication, logarithmic and integral operations. By organizing these building blocks, a reconfigurable learning engine is architected and realized to simulate the STDP and BCPNN online learning rules, using memristors and 180 nm analog CMOS technology. The results show that the proposed learning engine can achieve energy consumption of 10.61 pJ and 51.49 pJ per synaptic update for the STDP and BCPNN learning rules, respectively, with a 147.03× and 93.61× reduction compared to the 180 nm ASIC counterparts, and also a 9.39× and 5.63× reduction compared to the 40 nm ASIC counterparts. Compared with the state-of-the-art work of Loihi and eBrainII, the learning engine can reduce the energy per synaptic update by 11.31× and 13.13× for trace-based STDP and BCPNN learning rules, respectively.
Assuntos
Educação a Distância , Teorema de Bayes , Redes Neurais de Computação , Aprendizagem , EncéfaloRESUMO
5,10-methenyltetrahydrofolate synthetase (MTHFS) deficiency is a folate metabolism disorder known as a rare autosomal recessive neurodevelopmental disorder (MIM: #618367). With central nervous system involvements, it is mainly characterized by developmental delay, epilepsy, microcephaly, hypertonia, and cranial nerves involvement. Here, we report three new cases with MTHFS deficiency from two non-consanguineous Chinese families. All patients showed white matter dysplasia and global developmental delay, of which only patient 1 and 2 manifested tonic-clonic seizures. Moreover, patient 2 had severe eczema and patient 3 had recurrent diarrhea. Both phenotypic features are firstly found in MTHFS deficiency. Trio whole-exome sequencing and sanger sequencing were used to identify four novel variants, p.Y169Tfs*17, p.S53F, c.117+1delG, and p.E61G in the MTHFS gene. The identification of four novel pathogenic variants and varied clinical features in three affected patients expands the genotype and phenotype spectrum of MTHFS deficiency. We also reviewed all cases of MTHFS deficiency that had previously been reported. The experience of diagnosis and treatment from these cases provides us a more comprehensive understanding of this rare disease.
RESUMO
A metal-organic framework (MOF) is used to thermally grow cobalt selenophosphide (CoSeP) nanoparticles on an N-doped 2-dimensional carbon matrix (CoSeP@N-C), resulting in an assembled unique 3-dimensional bean sprout-like nanosheet composite with massive defects as an advanced anode material of sodium ion batteries. The results indicate that the massive defects in the CoSeP@N-C sprout-like 3-D structure can offer high density of reaction sites and well accommodate the volume change during the sodiation/desodiation process, while rendering abundant channels for rapid transport of sodium ions, thereby synergistically making the CoSeP@N-C anode much more reversible for the sodium ion storage process and producing higher rate performance than those of CoP2 and CoSe2@N-C. The ex situ X-ray diffraction, ex situ Raman and ex situ TEM analyses further confirm the mechanism of sodium storage intercalation and transformation in CoSeP@N-C. This work vividly demonstrates a rational design of metal selenophosphide anodes as an effective strategy to accomplish fast and high sodium-ion storage.