Biological and microbiological behavior of calcium aluminate cement-based blend for filling of bone defects.

Calcium aluminate cement (CAC) as a biomaterial has been evaluated for its physical, mechanical and biocompatibility properties. Furthermore, the application of CAC for bone repair is due to its composition and coefficient of thermal expansion, which is similar to that of human bone. Thus, the aim of this study was to evaluate compositions of CAC-based blends as substitutes for bone defects. Five compositions of blends (alumina, zirconia, hydroxyapatite, tricalcium phosphate, chitosan), in addition to the base cement consisting of homogeneous CAC were evaluated as a substitute for bone repair. Additionally, the monotypic biofilm formation was assessed. Creation of a monocortical bone defect was performed on the femurs of rats, which were randomly filled with the different materials. The polymethylmethacrylate (PMMA) group was used as a control. All the animals were euthanized 04 weeks after the surgery procedure. Subsequently, computerized microtomography, histological and histomorphometric analyses were performed to verify the bone repair. To evaluate the formation of biofilms, reference strains of Staphylococcus aureus, Streptococcus mutans and Pseudomonas aeruginosa were cultured on the samples, and the biofilm formed was quantified by the MTT method. In the microtomography and histomorphometry results, it was observed that the blends exhibited better results than the control group, with statistically significant differences (p < 0.05) for alumina and zirconia blends. In the biofilm formation, a statistical difference (p < 0.05) in general was observed between the alumina blends and the control group (p < 0.05). It was concluded that CAC-based blends with alumina and zirconia are promising for use in fillings for bone repair.

Development and characterization of ceramic-polymeric hybrid scaffolds for bone regeneration: incorporating of bioactive glass BG-58S into PDLLA matrix.

In recent years, there has been a notable surge of interest in hybrid materials within the biomedical field, particularly for applications in bone repair and regeneration. Ceramic-polymeric hybrid scaffolds have shown promising outcomes. This study aimed to synthesize bioactive glass (BG-58S) for integration into a bioresorbable polymeric matrix based on PDLLA, aiming to create a bioactive scaffold featuring stable pH levels. The synthesis involved a thermally induced phase separation process followed by lyophilization to ensure an appropriate porous structure. BG-58S characterization revealed vitreous, bioactive, and mesoporous structural properties. The scaffolds were analyzed for morphology, interconnectivity, chemical groups, porosity and pore size distribution, zeta potential, pH, in vitro degradation, as well as cell viability tests, total protein content and mineralization nodule production. The PDLLA scaffold displayed a homogeneous morphology with interconnected macropores, while the hybrid scaffold exhibited a heterogeneous morphology with smaller diameter pores due to BG-58S filling. The hybrid scaffold also demonstrated a pH buffering effect on the polymer surface. In addition to structural characteristics, degradation tests indicated that by incorporating BG-58S modified the acidic degradation of the polymer, allowing for increased total protein production and the formation of mineralization nodules, indicating a positive influence on cell culture.

Biocomposite Macrospheres Based on Strontium-Bioactive Glass for Application as Bone Fillers.

Traditional bioactive glass powders are typically composed of irregular particles that can be packed into dense configurations presenting low interconnectivity, which can limit bone ingrowth. The use of novel biocomposite sphere formulations comprising bioactive factors as bone fillers are most advantageous, as it simultaneously allows for packing the particles in a 3-dimensional manner to achieve an adequate interconnected porosity, enhanced biological performance, and ultimately a superior new bone formation. In this work, we develop and characterize novel biocomposite macrospheres of Sr-bioactive glass using sodium alginate, polylactic acid (PLA), and chitosan (CH) as encapsulating materials for finding applications as bone fillers. The biocomposite macrospheres that were obtained using PLA have a larger size distribution and higher porosity and an interconnectivity of 99.7%. Loose apatite particles were observed on the surface of macrospheres prepared with alginate and CH by means of soaking into a simulated body fluid (SBF) for 7 days. A dense apatite layer was formed on the biocomposite macrospheres' surface produced with PLA, which served to protect PLA from degradation. In vitro investigations demonstrated that biocomposite macrospheres had minimal cytotoxic effects on a human osteosarcoma cell line (SaOS-2 cells). However, the accelerated degradation of PLA due to the degradation of bioactive glass may account for the observed decrease in SaOS-2 cells viability. Among the biocomposite macrospheres, those composed of PLA exhibited the most promising characteristics for their potential use as fillers in bone tissue repair applications.

Biomineralization induced by chitosan and collagen-based materials with fluoride for dentin coverage: Chemical and morphological analysis.

The prevention and treatment of erosive tooth wear are becoming increasingly important due to its increasing prevalence. The use of natural solutions to modify dental surfaces has become an area of research. Organic materials such as chitosan and hydrolyzed collagen may be a promising option to treat dentin. This in vitro study aimed to evaluate the influence of chitosan or hydrolyzed collagen, alone or combined with acidulated phosphate fluoride (APF) gel, on the composition and morphology of dentin after erosion. Bovine dentin samples were prepared (n = 84) and treated with artificial saliva (AS, negative control); APF gel (F, positive control); chitosan solution (Chi); hydrolyzed collagen solution (Col); fluoride/chitosan composition (F_Chi); and fluoride/hydrolyzed collagen composition (F_Col). Erosive cycles (six cycles of immersion in orange juice for 1 min, followed by immersion in AS for 1 hr) were performed. The materials were characterized by their morphology, composition, and particle size distribution. Micro-energy dispersive X-ray fluorescence spectroscopy and scanning electron were used to evaluate the dentin's inorganic chemical composition and morphology. The F_Col and F groups had a reduction in calcium loss by 17 and 26%, respectively (p < .001). Both of these groups still had a covering layer of agglomerates at the dentin surface after the erosive cycles. The fluoridated chitosan or collagen solutions improved the dentin resistance to erosion as a novel hybrid-fluoride-based material approach to provide surface protection from erosion.

Chemical and morphological evaluation of enamel and dentin near cavities restored with conventional and zirconia modified glass ionomer subjected to erosion-abrasion.

Microenergy dispersive X-ray fluorescence (µ-EDXRF) spectroscopy and scanning electron microscopy (SEM) were used to test the hypothesis that zirconia modified glass ionomer cement (GIC) could improve resistance to erosion-abrasion to a greater extent than conventional cement. Bovine enamel (n = 40) and dentin (n = 40) samples were prepared with cavities, filled with one of the two restorative materials (GIC: glass-ionomer cement or ZrGIC: zirconia-modified GIC). Furthermore, the samples were treated with abrasion-saliva (AS) or abrasion-erosion cycles (AE). Erosive cycles (immersion in orange juice, three times/day for a duration of 1 min over a 5 day period) and/or abrasive challenges (electric toothbrush, three times/day for a duration of 1 min over a 5 day period) were performed. Positive mineral variation (MV%) on the enamel after erosion-abrasion was observed for both materials (p < 0.05), whereas a negative MV% on the dentin was observed for both materials and treatments (p < 0.05). The SEM images showed clear enamel loss after erosion-abrasion treatment and material degradation was greater in GIC_AE compared to those of the other groups. Toothbrush abrasion showed a synergistic effect with erosion on substance loss of bovine enamel, dentin, GIC, and ZrGIC restorations. Zirconia addition to the GIC powder improved the resistance to abrasive-erosive processes. The ZrGIC materials may find application as a restorative material due to improved resistance as well as in temporary restorations and fissure sealants.

The Organochalcogen Compound (MeOPhSe)2 Inhibits Both Formation and the Viability of the Biofilm Produced by Candida albicans, at Different Stages of Development.

BACKGROUND: Candida albicans is a commensal and opportunistic fungus which is able to produce both local and systemic infections in immunocompromised patients. A correlation has been demonstrated between the resistance to conventional antifungal drugs and C. albicans ability to produce biofilms. Therefore, the potential of the organochalcogen compounds as antifungal therapy has been demonstrated. METHOD: In this work, we studied the effect of the organochalcogen compound (MeOPhSe)2 on both formation and the viability of the biofilm produced by C. albicans, at different stages of development. Biofilm formation and viability were determined by a metabolic assay based on the reduction of XTT assay. In addition, the morphology of the biofilm was observed using light microscopy. RESULTS: A significant reduction was observed in both growth and biofilm formation by C. albicans, in a dependent manner of cell density. In the presence of 2 µM (MeOPhSe)2 it was observed an inhibition of 87, 72, 69 and 56 % in C. albicans growth, using cell densities of 104, 105, 106 and 107 cells/mL, respectively. C. albicans growth was inhibited >90 % in the presence of 10 µM (MeOPhSe)2 in all cell densities used. Also, (MeOPhSe)2 was found to be able to decrease the viability of the biofilm produced by C. albicans at different stages of development. This effect was more pronounced in early biofilms as compared to mature biofilms. Biofilms forming at 6 and 12 hours was inhibited ~80% in the presence of 10 µM (MeOPhSe)2. However, mature biofilms presented an inhibition of ~40 % in the presence of 10 µM (MeOPhSe)2. The analyses of the structure of the biofilm have shown a significant reduction in the number of both yeast and filamentous form after treatment with (MeOPhSe)2. In addition, the organochalcogen compound (MeOPhSe)2 did not modify the viability of Fibroblastic cells. CONCLUSION: Taken together, these results demonstrated the potential of the organochalcogen compound (MeOPhSe) 2 as a promising antifungal therapy.