Photochemical α-Aminonitrile Synthesis Using Zn-Phthalocyanines as Near-Infrared Photocatalysts.

While photochemical transformations with sunlight almost exclusively utilize the UV-vis part of the solar spectrum, the majority of the photons emitted by the sun have frequencies in the near-infrared region. Phthalocyanines show high structural similarity to the naturally occurring light-harvesting porphyrins, chlorins, and mainly bacteriochlorins and are also known for being efficient and affordable near-infrared light absorbers as well as triplet sensitizers for the production of singlet oxygen. Although having been neglected for a long time in synthetic organic chemistry due to their low solubility and high tendency toward aggregation, their unique photophysical properties and chemical robustness make phthalocyanines attractive photocatalysts for the application in near-infrared-light-driven synthesis strategies. Herein, we report a cheap, simple, and efficient photocatalytic protocol, which is easily scalable under continuous-flow conditions. Various phthalocyanines were studied as near-infrared photosensitizers in oxidative cyanations of tertiary amines to generate α-aminonitriles, a synthetically versatile compound class.

Direct Synthesis of α-Sulfenylated Ketones under Electrochemical Conditions.

We investigated the electrochemical sulfenylation reaction in both batch and continuous flow regimes, involving thiophenols/thiols and enol-acetates to yield α-sulfenylated ketones, without using additional oxidants or catalysts. Studies with different electrolytes were also performed, revealing that quaternary ammonium salts are the best mediators for this reaction. Notably, during the study of the reaction scope, a Boc-cysteine proved to be extremely tolerant to our protocol, thus increasing its relevance. The methodology also proved to be scalable in both batch and continuous flow conditions, opening up possibilities for further studies since these relevant functional groups are important moieties in organic synthesis.

Environmentally Safe Photodynamic Control of Aedes aegypti Using Sunlight-Activated Synthetic Curcumin: Photodegradation, Aquatic Ecotoxicity, and Field Trial.

This study reports curcumin as an efficient photolarvicide against Aedes aegypti larvae under natural light illumination. Larval mortality and pupal formation were monitored daily for 21 days under simulated field conditions. In a sucrose-containing formulation, a lethal time 50 (LT50) of 3 days was found using curcumin at 4.6 mg L-1. This formulation promoted no larval toxicity in the absence of illumination, and sucrose alone did not induce larval phototoxicity. The photodegradation byproducts (intermediates) of curcumin were determined and the photodegradation mechanisms proposed. Intermediates with m/z 194, 278, and 370 were found and characterized using LC-MS. The ecotoxicity of the byproducts on non-target organisms (Daphnia, fish, and green algae) indicates that the intermediates do not exhibit any destructive potential for aquatic organisms. The results of photodegradation and ecotoxicity suggest that curcumin is environmentally safe for non-target organisms and, therefore, can be considered for population control of Ae. aegypti.

Synthesis of multi-substituted pyridines from ylidenemalononitriles and their emission properties.

Numerous methodologies to obtain pyridines from ylidenemalononitriles are described in the literature. Nevertheless, they are limited to the use of microwave or conventional heat and few lead to 2,3,4 or 2,3,4,5-substituted pyridines as multi-proposal molecular scaffolds or even universal pyridines. Herein, we present a mild and facile solvent-free methodology to obtain a scope of multi-substituted pyridines at room temperature. We also report an example where one of the resulting amino-nicotinonitriles exhibits a preliminary evidence of aggregation-induced emission (AIE).

Increasing Scope of Clickable Fluorophores: Electrophilic Substitution of Ylidenemalononitriles.

Recently, we demonstrated that ylidenemalononitriles (YMs) react with amines to form cyclic amidines and that the starting linear YMs are nonemissive in solution and the cyclic amidines are fluorescent. These turn-on systems were of interest to us because of their potential as biosensors and synthons for accessing functionalized pyridines. While our original method was promising, several limitations persisted, including access to more functionalized and polar-solvent-soluble structures as well as increased control over the rate of cyclization. Herein, we report a new approach that allows the electrophilic substitution of YMs. These substituted YMs exhibit faster turn-on rates, color tunability, access to polar-solvent-soluble species, and increased control over cyclization rate. This allowed us to significantly expand the fluorophore's chemical space.

Sulfonyl Fluoride Synthesis through Electrochemical Oxidative Coupling of Thiols and Potassium Fluoride.

Sulfonyl fluorides are valuable synthetic motifs for a variety of applications, among which sulfur(VI) fluoride exchange-based "click chemistry" is currently the most prominent. Consequently, the development of novel and efficient synthetic methods to access these functional groups is of great interest. Herein, we report a mild and environmentally benign electrochemical approach to prepare sulfonyl fluorides using thiols or disulfides, as widely available starting materials, in combination with KF, as an inexpensive, abundant and safe fluoride source. No additional oxidants nor additional catalysts are required and, due to mild reaction conditions, the reaction displays a broad substrate scope, including a variety of alkyl, benzyl, aryl and heteroaryl thiols or disulfides.

Photoarylation of Pyridines Using Aryldiazonium Salts and Visible Light: An EDA Approach.

A metal-free methodology for the photoarylation of pyridines, in water, is described giving 2 and 4-arylated-pyridines in yields up to 96%. The scope of the aryldiazonium salts is presented showing important results depending on the nature and position of the substituent group in the diazonium salt, that is, electron-donating or electron-withdrawing in the ortho, meta, or para positions. Further heteroaromatics were also successfully photoarylated. Mechanistic studies and comparison between our methodology and similar metal-catalyzed procedures are presented, suggesting the occurrence of a visible-light EDA complex which generates the aryl radical with no need for an additional photocatalyst.

Continuous Endoperoxidation of Conjugated Dienes and Subsequent Rearrangements Leading to C-H Oxidized Synthons.

We have investigated the continuous flow photooxidation of several conjugated dienes and subsequent rearrangement using a practical and safe continuous-flow homemade engineered setup. End-to-end approaches involving endoperoxidation, Kornblum-DeLaMare rearrangement, and additional rearrangements are comprehensively detailed with optimization, scope, and scale-up to obtain useful hydroxyenones, furans, and 1,4-dicarbonyl building blocks.

Porphyrins as Photoredox Catalysts in Csp2-H Arylations: Batch and Continuous Flow Approaches.

We have investigated both batch and continuous flow photoarylations of enol-acetates to yield different α-arylated aldehyde and ketone building blocks by using diazonium salts as the aryl-radical source. Different porphyrins were used as SET photocatalysts, and photophysical as well as electrochemical studies were performed to rationalize the photoredox properties and suggest mechanistic insights. Notably, the most electron-deficient porphyrin ( meso-tetra(pentafluorophenyl)porphyrin) shows the best photoactivity as an electron donor in the triplet excited state, which was rationalized by the redox potentials of excited states and the turnover of the porphyrins in the photocatalytic cycle. A two-step continuous protocol and multigram-scale reactions are also presented revealing a robust, cost-competitive, and easy methodology, highlighting the significant potential of porphyrins as SET photocatalysts.

NIR bacteriochlorin chromophores accessed by Heck and Sonogashira cross-coupling reactions on a tetrabromobacteriochlorin derivative.

The synthesis of a new tetrabromobacteriochlorin BCBr4 is reported having the 3,4-dibromo-1H-pyrrole-2-carbaldehyde (10) as the major precursor. The BCBr4 was successfully employed in Pd cross-coupling reactions with methyl acrylate, phenyl acetylene and 4-ethynylanisole. In all three cases, the desired tetra-coupled products were obtained in good to excellent yields, and present a significant red shift in the UV-Vis bands above 800 nm. DFT and TD-DFT theoretical analyses of the NIR bacteriochlorin chromophores were performed in order to evaluate the effect of ß substitution on their electronic structures.

Porphyrins as Catalysts in Scalable Organic Reactions.

Catalysis is a topic of continuous interest since it was discovered in chemistry centuries ago. Aiming at the advance of reactions for efficient processes, a number of approaches have been developed over the last 180 years, and more recently, porphyrins occupy an important role in this field. Porphyrins and metalloporphyrins are fascinating compounds which are involved in a number of synthetic transformations of great interest for industry and academy. The aim of this review is to cover the most recent progress in reactions catalysed by porphyrins in scalable procedures, thus presenting the state of the art in reactions of epoxidation, sulfoxidation, oxidation of alcohols to carbonyl compounds and C-H functionalization. In addition, the use of porphyrins as photocatalysts in continuous flow processes is covered.

A practical deca-gram scale ring expansion of (R)-(-)-carvone to (R)-(+)-3-methyl-6-isopropenyl-cyclohept-3-enone-1.

A route to enantiopure (R)-(+)-3-methyl-6-isopropenyl-cyclohept-3-enone-1, an intermediate for terpenoids, has been developed and includes a highly chemo- and regioselective Tiffeneau-Demjanov reaction. Starting from readily available (R)-(-)-carvone, this robust sequence is available on a deca-gram scale and uses flow chemistry for the initial epoxidation reaction. The stereochemistry of the addition of two nucleophiles to the carbonyl group of (R)-(-)-carvone has been determined by X-ray diffraction studies and chemical correlation.

Synthesis of new chlorin†e6 trimethyl and protoporphyrin†IX dimethyl ester derivatives and their photophysical and electrochemical characterizations.

In view of increasing demands for efficient photosensitizers for photodynamic therapy (PDT), we herein report the synthesis and photophysical characterizations of new chlorin e6 trimethyl ester and protoporphyrin IX dimethyl ester dyads as free bases and Zn(II) complexes. The synthesis of these molecules linked at the ß-pyrrolic positions to pyrano[3,2-c]coumarin, pyrano[3,2-c]quinolinone, and pyrano[3,2-c]naphthoquinone moieties was performed by using the domino Knoevenagel hetero Diels-Alder reaction. The α-methylenechromanes, α-methylenequinoline, and ortho-quinone methides were generated in situ from a Knoevenagel reaction of 4-hydroxycoumarin, 4-hydroxy-6-methylcoumarin, 4-hydroxy-N-methylquinolinone, and 2-hydroxy-1,4-naphthoquinone, respectively, with paraformaldehyde in dioxane. All the dyads as free bases and as Zn(II) complexes were obtained in high yields. All new compounds were fully characterized by 1D and 2D NMR techniques, UV/Vis spectroscopy, and HRMS. Their photophysical properties were evaluated by measuring the fluorescence quantum yield, the singlet oxygen quantum yield by luminescence detection, and also the triplet lifetimes were correlated by flash photolysis and intersystem crossing (ISC) rates. The fluorescence lifetimes were measured by a time-correlated single photon count (TCSPC) method, fluorescence decay associated spectra (FDAS), and anisotropy measurements. Magnetic circular dichroism (MCD) and circular dichroism (CD) spectra were recorded for one Zn(II) complex in order to obtain information, respectively, on the electronic and conformational states, and interpretation of these spectra was enhanced by molecular orbital (MO) calculations. Electrochemical studies of the Zn(II) complexes were also carried out to gain insights into their behavior for such applications.

Photobiological characteristics of chlorophyll a derivatives as microbial PDT agents.

Chlorin-e6 (chl-e6) and a hydrogenated derivative (chl-e6H) were semi-synthesized, and their photophysical properties and photodynamic activity against Escherichia coli, Staphylococcus aureus and Candida albicans evaluated. Methyl pheophorbide-a (Mepheo-a) was obtained from S. maxima using methanolic extraction with acid catalysis (CH3OH­H2SO4). Chlorin-e6 was prepared from Mepheo-a by basic hydrolysis with H2O­acetone and NaOH. Hydrogenated Chlorin-e6 was synthesized by a similar procedure starting from the hydrogenated methyl pheophorbide-a (Mepheo-aH). Photophysical studies were performed in order to determine the singlet oxygen quantum yield of chl-e6H which is higher than that of chl-e6. The microorganism inactivation of chl-e6 and chl-e6H was investigated at two concentrations and three fluence levels. Both chl-e6 and chl-e6H showed microorganism inactivation against Gram-positive bacteria and a fungus.

Validation of photodynamic action via photobleaching of a new curcumin-based composite with enhanced water solubility.

Motivated by the photochemical and photophysical properties of curcumin-based composites, the characteristics of a new curcumin-based water-soluble salt were investigated via absorption and fluorescence spectroscopy. Photobleaching was investigated using a set of LEDs in three different wavelengths (405 nm, 450 nm and 470 nm) to illuminate an aqueous solution of curcumin, evaluating its degradation for five different exposure times (0, 5, 15, 45 and 105 minutes). The results were compared with equivalent measurements of dark degradation and illumination in the presence of a singlet-oxygen quencher. Three solution concentrations (50, 100 and 150 µg/ml) were studied. To measure the fluorescence, it was used low power 405 nm excitation laser source. Time dependent photodegradation of curcumin was observed, as compared to the natural degradation of samples maintained on a dark environment. Two main absorption peaks were detected and their relation responded to both concentration and wavelength of the illumination source. A spectral correlation between absorption of curcumin and the emission bands of the sources showed an optimal spectral overlap for the 450 nm LED. For this source, photobleaching showed a less intense degradation on the presence of singlet oxygen quencher. This last result confirmed singlet oxygen production in vitro, indicating a strong potential of this composite to be used as a blue-light-activated photosensitizer.

Linker for activation of T-cell family member2 (LAT2) a lipid raft adaptor protein for AKT signaling, is an early mediator of alkylphospholipid anti-leukemic activity.

Lipid rafts are highly ordered membrane domains rich in cholesterol and sphingolipids that provide a scaffold for signal transduction proteins; altered raft structure has also been implicated in cancer progression. We have shown that 25 µm 10-(octyloxy) decyl-2-(trimethylammonium) ethyl phosphate (ODPC), an alkylphospholipid, targets high cholesterol domains in model membranes and induces apoptosis in leukemia cells but spares normal hematopoietic and epithelial cells under the same conditions. We performed a quantitative (SILAC) proteomic screening of ODPC targets in a lipid-raft-enriched fraction of leukemic cells to identify early events prior to the initiation of apoptosis. Six proteins, three with demonstrated palmitoylation sites, were reduced in abundance. One, the linker for activation of T-cell family member 2 (LAT2), is an adaptor protein associated with lipid rafts in its palmitoylated form and is specifically expressed in B lymphocytes and myeloid cells. Interestingly, LAT2 is not expressed in K562, a cell line more resistant to ODPC-induced apoptosis. There was an early loss of LAT2 in the lipid-raft-enriched fraction of NB4 cells within 3 h following treatment with 25 µm ODPC. Subsequent degradation of LAT2 by proteasomes was observed. Twenty-five µm ODPC inhibited AKT activation via myeloid growth factors, and LAT2 knockdown in NB4 cells by shRNA reproduced this effect. LAT2 knockdown in NB4 cells also decreased cell proliferation and increased cell sensitivity to ODPC (7.5×), perifosine (3×), and arsenic trioxide (8.5×). Taken together, these data indicate that LAT2 is an early mediator of the anti-leukemic activity of alkylphospholipids and arsenic trioxide. Thus, LAT2 may be used as a target for the design of drugs for cancer therapy.

Continuous flow reactions in the preparation of active pharmaceutical ingredients and fine chemicals.

Herein, we present an overview of continuous flow chemistry, including photoflow and electroflow technologies in the preparation of active pharmaceutical ingredients (APIs) and fine chemical intermediates. Examples highlighting the benefits and challenges associated with continuous flow processes, mainly involving continuous thermal, photo- and electrochemical transformations, are drawn from the relevant literature, especially our experience and collaborations in this area, with emphasis on the synthesis and prospective scale-up.

Pd(II)/diphosphine/curcumin complexes as potential anticancer agents.

Palladium(II) complexes have stimulated research interest mainly due to their in vitro cytotoxicity against various cancer cell lines and their low cytotoxicity in healthy cells. Thus, in this work, we combined Pd(II)/phosphine systems with the natural product curcumin as a ligand, obtaining a series of complexes, [Pd(cur)(PPh3)2]PF6 (A1), [Pd(cur)(dppe)]PF6 (A2), [Pd(cur)(dppp)]PF6 (A3), [Pd(cur)(dppb)]PF6 (A4) and [Pd(cur)(dppf)]PF6 (A5), where dppe = 1,2-bis(diphenylphosphino)ethane, dppp = 1,3-bis(diphenylphosphino)propane, dppb = 1,4-bis(diphenylphosphino)butane, and dppf = 1,1'-bis(diphenylphosphino)ferrocene (P-P), which were characterized by elemental analysis, molar conductivity analysis, and mass, NMR (1H, 13C, 31P{1H}), UV-vis, and IR spectroscopies, and four of them (A1, A2, A4, and A5) by X-ray crystallography. The in vitro cell viability of the complexes A1-A5, cisplatin, and the free ligand curcumin against MDA-MB-231 (human triple-negative breast tumor cells), SK-BR-3 (human breast tumor cells), A549 (human lung tumor cells), MRC-5 (non-tumor human lung cells), A2780 (human ovarian carcinoma cells), and A2780cis (cisplatin-resistant human ovarian carcinoma cells), was evaluated by the MTT colorimetric assay. For the tumor cell lines tested, the complexes showed good anticancer activities. The results showed that in general the complexes had lower IC50 values than free curcumin and the precursors [PdCl2(P-P)]. IC50 results obtained for the A1-A5 complexes, in the MCF-7 cell line, are similar to those that had already been observed for some Pd/bipy/curcumin complexes. In the MDA-MB-231 cell line, complexes A1 and A5 stood out, with their lowest IC50 values, around 5 µmol L-1, and the complexes appeared to be more active (lower IC50 values) against the ovarian cell lines. Complex A1 was 23 and 22-fold more cytotoxic than cisplatin, against the A2780 and A2780cis cells, respectively. The complex A1 was studied on A2780cis cells and it was found that this complex inhibits colony formation and induces cell cycle arrest in the sub-G1 phase in a concentration-dependent manner and leads to cell death by apoptosis. The DCFDA assay revealed a potent ROS induction for complex A1.

Synthesis of the Brivaracetam Employing Asymmetric Photocatalysis and Continuous Flow Conditions.

An original total synthesis of the antiepileptic drug brivaracetam (BRV) is reported. The key step in the synthesis consists of an enantioselective photochemical Giese addition, promoted by visible-light and the chiral bifunctional photocatalyst Δ-RhS. Continuous flow conditions were employed to improve the efficiency and allow an easy scale-up of the enantioselective photochemical reaction step. The intermediate obtained from the photochemical step was converted into BRV by two different pathways, followed by one alkylation and amidation, thus giving the desired active pharmaceutical ingredients (API) in 44% overall yield, 9:1 diastereoisomeric ratio (dr) and >99:1 enantiomeric ratio (er).

Electrochemical reduction of 5-benzylidene thiazolidine-2,4-diones: a greener approach to the preparation of glitazone APIs.

A transition-metal free methodology for the chemoselective reduction of benzylidene thiazolidine-2,4-diones and similar heterocycles is described, allowing the preparation of a broad scope of the corresponding reduced derivatives in up to 90% yield. The protocol has a simple and safe experimental setup, in which water was employed as the hydrogen source. To further demonstrate the synthetic utility of this transformation, the antidiabetic API Pioglitazone was prepared in 81% yield. To the best of our knowledge, this is the first hydride and transition-metal free protocol for the synthesis of Pioglitazone, highlighting its potential utility as a greener alternative in both academic and industrial synthesis.