Versatile polymer microspheres for injection therapy: aspects of fluoroscopic traceability and biofunctionalization.

Synthesis and characterization of a series of novel microspheres featuring (i) radiopacity (i.e., clear fluoroscopic traceability) and (ii) an outer surface exposing aldehyde groups are reported. The aldehydes allowed us to tether proteins onto the particles' surface under mild conditions, under which the protein conformation and, hence, structural motifs for biorecognition are preserved. Essential monomer building blocks were (i) 4-iodobenzoyl-2-oxo-ethylmethacrylate (4-IEMA) for radiopacity and (ii) propenal for surface tethering of proteins. The particles demonstrated good X-ray visibility and cytocompatibility. Procedures to couple proteins onto the surface were optimized using fluorescent bovine serum albumin (FITC-BSA) or collagen (FITC-collagen). Furthermore, radiopaque microparticles with unlabeled bovine collagen type I were produced. The presence of immobilized collagen was verified with narrow-scan X-ray photoelectron spectroscopy. Fibroblasts readily adhere to and grow on the collagen-modified surfaces, whereas this was much less the case for the unmodified controls. The results led us to suggest that immobilized nondenatured collagen may transform filler particles from passive space-occupying objects to particles that cross-talk with surrounding tissues.

A nontoxic additive to introduce x-ray contrast into poly(lactic acid). Implications for transient medical implants such as bioresorbable coronary vascular scaffolds.

Bioresorbable coronary vascular scaffolds are about to revolutionize the landscape of interventional cardiology. These scaffolds, consisting of a poly(L-lactic acid) interior and a poly(D,L-lactic acid) surface coating, offer a genuine alternative for metallic coronary stents. Perhaps the only remaining drawback is that monitoring during implantation is limited to two X-ray contrast points. Here, a new approach to make the biodegradable scaffolds entirely radiopaque is explored. A new contrast agent is designed and synthesized. This compound is miscible with poly(D,L-lactic acid) matrix, and nontoxic to multiple cell types. Blends of poly(D,L-lactic acid) and the contrast agent are found to be hemocompatible, noncytotoxic, and radiopaque. The data show that it is possible to manufacture fully radiopaque bioresorbable coronary vascular scaffolds. Whole-stent X-ray visibility helps interventionalists ensure that the scaffold deploys completely. This important advantage may translate into improved safety, accuracy, and clinical performance of cardiac stents.

Utilization of flax fibers for biomedical applications.

Over the past decades, a large number of animal-derived materials have been introduced for several biomedical applications. Surprisingly, the use of plant-based materials has lagged behind. To study the feasibility of plant-derived biomedical materials, we chose flax (Linum usitatissimum). Flax fibers possess excellent physical-mechanical properties, are nonbiodegradable, and there is extensive know-how on weaving/knitting of them. One area where they could be useful is as implantable mesh structures in surgery, in particular for the repair of incisional hernias of the abdominal wall. Starting with a bleached flax thread, a prototype mesh was specifically knitted for this study, and its cytocompatibility was studied in vitro and in vivo. The experimental data revealed that application of flax in surgery first requires a robust method to remove endotoxins and purify the flax fiber. Such a method was developed, and purified meshes did not cause loss of cell viability in vitro. In addition, endotoxins determined using limulus amebocyte lysate test were at acceptable levels. In vivo, the flax meshes showed only mild inflammation, comparable to commercial polypropylene meshes. This study revealed that plant-derived biomaterials can provide a new class of implantable materials that could be used as surgical meshes or for other biomedical applications.

A highly radiopaque vertebroplasty cement using tetraiodinated o-carborane additive.

Bone cements for vertebroplasty must have a much better radiocontrast level than cements for knee or hip arthroplasty. This is generally accomplished by adding a relatively large portion of BaSO(4), although this affects the physical-mechanical and biological properties of the cement. This prompted us to develop an alternative radiopaque cement, on the basis of unique highly radiopaque methacrylic microspheres. These contain iodine in two modalities: (i) covalently linked to the methacrylic polymer, and (ii) as constituent of the stable tetraiodocarborane 8,9,10,12-I(4)-1,2-closo-C(2)B(10)H(8). The total iodine content in these particles exceeded 30% by mass. These radiopaque microspheres as well as the cement made thereof were characterized extensively, e.g., by scanning electron microscopy, X-ray contrast measurements, X-ray photoelectron spectroscopy, measurements of compressive strength, infrared spectroscopy, and solid state (11)B{(1)H} NMR spectroscopy. Furthermore, the new cement was subjected to several biocompatibility tests in vitro. The results show that the new bone cement fulfills all physico-chemical criteria for use in vertebroplasty. Further data on the cement's biocompatibility (in vitro), as well as on the handling parameters and doughviscosity, indicate that this material has a potential to become an alternative to vertebroplasty cements with a high BaSO(4) content. The new cement provides two significant advantages: (i) controlled viscosity in the dough phase, which facilitates precise injection during the vertebroplasty procedure; (ii) excellent structural stability, which precludes leaching of contrast post-implantation.

Hydrophilic surface coatings with embedded biocidal silver nanoparticles and sodium heparin for central venous catheters.

Central venous catheters (CVCs) have become indispensable in the treatment of neonates and patients undergoing chemotherapy or hemodialysis. A CVC provides easy access to the patient's circulation, thus enabling facile monitoring of hemodynamic parameters, nutritional support, or administration of (cytostatic) medication. However, complications with CVCs, such as bacterial bloodstream infection or thromboembolism, are common. Bloodstream infections, predominantly caused by Staphylococcus aureus, are notoriously difficult to prevent and treat. Furthermore, patients receiving infusion therapy through a CVC are at risk for deep-vein thrombosis, especially of the upper limbs. Several recent clinical trials have shown that prophylactic anticoagulation (low-molecular-weight heparin or vitamin K antagonists) is not effective. Here, we report on the systematic development of a new bifunctional coating concept that can -uniquely- be applied to make CVC surfaces antimicrobial and antithrombogenic at the same time. The novel coating consists of a moderately hydrophilic synthetic copolymer of N-vinylpyrrollidinone (NVP) and n-butyl methacrylate (BMA), containing embedded silver nanoparticles (AgNPs) and sodium heparin. The work demonstrates that the AgNPs strongly inhibit adhesion of S. aureus (reference strain and clinical isolates). Surprisingly, heparin not only rendered our surfaces practically non-thrombogenic, but also contributed synergistically to their biocidal activity.

Positive microcontact printing with mercaptoalkyloligo(ethylene glycol)s.

The soft lithographic replication of patterns with a low filling ratio by microcontact printing (microCP) is problematic due to the poor mechanical stability of common elastomeric stamps. A recently described strategy to avoid this problem employs a modified patterning method, positive microcontact printing ((+)microCP), in which a stamp with a mechanically more stable inverted relief pattern is used. In contrast to conventional negative microCP ((-)microCP), in the contact areas a self-assembled monolayer (SAM) is printed of a "positive ink", which provides only minor etch protection, whereas the noncontacted areas are subsequently covered with a different, etch-resistant SAM, prior to development by chemical etching. With the aim to identify novel, highly versatile positive inks, the patterning of gold by (+)microCP with mercaptoalkyloligo(ethylene glycol)s (MAOEGs), the subsequent adsorption of octadecanethiol (ODT), and the final development by wet chemical etching have now been studied. A polydisperse mixture of mercaptoundecylocta(ethylene glycol) derivatives was found to provide the best patterning results. The surface spreading of the positive ink during stamping, the exchange of printed MAOEGs with ODT, and the choice of the right etching bath were identified as key parameters that influence the achievable pattern resolution and contrast. Due to the modular composition of functionalized alkyloligo(ethylene glycol) derivatives, (+)microCP with these positive inks has the potential for easy adaptation to a variety of materials and development conditions.

Ink dependence of poly(dimethylsiloxane) contamination in microcontact printing.

Poly(dimethylsiloxane) (PDMS) is the most widely used stamp material in microcontact printing. It has excellent properties with respect to versatility, chemical inertness, and mechanical stability. However, it has an inclination to contaminate printed substrates with low molecular weight siloxane fragments. In this study, it is shown, by a combination of lateral force microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy, that the extent of the PDMS-induced contamination is dependent on the nature of the ink used. The highest degree of contamination was found for relatively polar inks, whereas apolar alkanethiol inks were found to shield the substrate from contamination. This is interpreted in terms of the contaminating species being polar in nature.