RESUMO
Pretreatment is crucial for effective enzymatic saccharification of lignocellulose such as sugarcane bagasse (SCB). In the present study, SCB was pretreated with five kinds of heterogeneous Fenton-like systems (HFSs), respectively, in which α-FeOOH, α-Fe2O3, Fe3O4, and FeS2 worked as four traditional heterogeneous Fenton-like catalysts (HFCs), while FeVO4 worked as a novel HFC. The enzymatic reducing sugar conversion rate was then compared among SCB after different heterogeneous Fenton-like pretreatments (HFPs), and the optimal HFS and pretreatment conditions were determined. The mechanism underlying the difference in saccharification efficiency was elucidated by analyzing the composition and morphology of SCB. Moreover, the ion dissolution characteristics, variation of pH and Eh values, H2O2 and hydroxyl radical (·OH) concentration of FeVO4 and α-Fe2O3 HFSs were compared. The results revealed that the sugar conversion rate of SCB pretreated with FeVO4 HFS reached up to 58.25%, which was obviously higher than that under other HFPs. In addition, the surface morphology and composition of the pretreated SCB with FeVO4 HFS were more conducive to enzymatic saccharification. Compared with α-Fe2O3, FeVO4 could utilize H2O2 more efficiently, since the dissolved Fe3+ and V5+ can both react with H2O2 to produce more ·OH, resulting in a higher hemicellulose and lignin removal rate and a higher enzymatic sugar conversion rate. It can be concluded that FeVO4 HFP is a promising approach for lignocellulose pretreatment.
Assuntos
Celulose , Peróxido de Hidrogênio , Ferro , Saccharum , Vanadatos , Saccharum/química , Saccharum/metabolismo , Celulose/química , Celulose/metabolismo , Peróxido de Hidrogênio/metabolismo , Peróxido de Hidrogênio/química , Ferro/química , Ferro/metabolismo , Vanadatos/química , Celulase/química , Celulase/metabolismo , Lignina/química , Lignina/metabolismoRESUMO
To achieve rapid enrichment of the targeted hydrogen-producing bacterial population and reconstruction of the microbial community in the biological hydrogen-producing reactor, the activated sludge underwent multiple pretreatments using micro-aeration, alkaline treatment, and heat treatment. The activated sludge obtained from the multiple pretreatments was inoculated into the continuous stirred tank reactor (CSTR) for continuous operations. The community structure alteration and hydrogen-producing capability of the activated sludge were analyzed throughout the operation of the reactor. We found that the primary phyla in the activated sludge population shifted to Proteobacteria, Firmicutes, and Bacteroidetes, which collectively accounted for 96.69% after undergoing several pretreatments. This suggests that the multiple pretreatments facilitated in achieving the selective enrichment of the fermentation hydrogen-producing microorganisms in the activated sludge. The CSTR start-up and continuous operation of the biological hydrogen production reactor resulted in the reactor entering a highly efficient hydrogen production stage at influent COD concentrations of 4000 mg/L and 5000 mg/L, with the highest hydrogen production rate reaching 8.19 L/d and 9.33 L/d, respectively. The main genus present during the efficient hydrogen production stage in the reactor was Ethanoligenens, accounting for up to 33% of the total population. Ethanoligenens exhibited autoaggregation capabilities and a superior capacity for hydrogen production, leading to its prevalence in the reactor and contribution to efficient hydrogen production. During high-efficiency hydrogen production, flora associated with hydrogen production exhibited up to 46.95% total relative abundance. In addition, redundancy analysis (RDA) indicated that effluent pH and COD influenced the distribution of the primary hydrogen-producing bacteria, including Ethanoligenens, Raoultella, and Pectinatus, as well as other low abundant hydrogen-producing bacteria in the activated sludge. The data indicates that the multiple pretreatments and reactor's operation has successfully enriched the hydrogen-producing genera and changed the community structure of microbial hydrogen production.
Assuntos
Reatores Biológicos , Hidrogênio , Esgotos , Hidrogênio/metabolismo , Reatores Biológicos/microbiologia , Esgotos/microbiologia , Bactérias/metabolismo , Bactérias/genética , Eliminação de Resíduos Líquidos/métodos , Fermentação , MicrobiotaRESUMO
The present paper is focused on enhancing the production of biohydrogen (bioH2) from dairy cow manure (DCM) through dark fermentation (DF). Two enhancement production strategies have been tested: i) the combination of H2O2 with sonification as pretreatment and ii) the co-fermentation with cheese whey as co-substrate. Concerning the pretreatment, the best combination was investigated according to the response surface methodology (RSM) by varying H2O2 dosage between 0.0015 and 0.06 g/gTS and ultrasonic specific energy input (USEI) between 35.48 and 1419.36 J/gTS. The increase of carbohydrates concentration was used as target parameter. Results showed that the combination of 0.06 g/gTS of H2O2 with 1419.36 J/gTS of USEI maximized the concentration of carbohydrates. The optimized conditions were used to pretreat the substrate prior conducting DF tests. The use of pretreatment resulted in obtaining a cumulative bioH2 volume of 51.25 mL/L and enhanced the bioH2 production by 125% compared to the control test conducted using raw DCM. Moreover, the second strategy, i.e. co-fermentation with cheese whey (20% v/v) as co-substrate ended up to enhancing the DF performance as the bioH2 production reached a value of 334.90 mL/L with an increase of 1372% compared to the control DF test. To further improve the process, dark fermentation effluents (DFEs) were valorized via photo fermentation (PF), obtaining an additional hydrogen production aliquot.
Assuntos
Peróxido de Hidrogênio , Esterco , Animais , Bovinos , Fermentação , Soro do Leite , Proteínas do Soro do Leite , Carboidratos , HidrogênioRESUMO
RNA viruses are readily enriched in wastewater sludge owing to adsorption by extracellular polymeric substances (EPS) during wastewater treatment, causing pathogenicity. However, conventional wastewater extraction methods often fail to fully extract these viruses from sludge. In this study, three methods: enzymatic (ENP), alkaline (ALP), and ethylenediaminetetraacetic acid (EDTA) pretreatments were applied to sludges and promote the RNA virus extraction from sludge. Our results show that the total recovery rate of RNA viruses increased by 87.73% after ENP pretreatment, whereas ALP pretreatment inhibited virus extraction. The highest recovery rate of viruses from sludge, reaching 296.80%, was achieved with EDTA pretreatment (EDP) coupled with ENP. Notably, the most significant increase was observed in the abundance of Astroviruses, which increased from 7.60 × 107 to 7.86 × 108 copies/g TSS after EDP + ENP treatment. Our investigations revealed that virus extraction was affected by a class of short-wavelength protein substances, as opposed to tryptophan or tyrosine, which were eluted by proteins with beef paste buffer by substitution after EDP + ENP treatment. The results of this study provide essential insights for sludge-based epidemiology with the required sensitivity for managing the extraction of RNA epidemic viruses to control viral transmission.
Assuntos
Vírus de RNA , Vírus , Animais , Bovinos , Águas Residuárias , Esgotos , Ácido Edético/farmacologia , ProteínasRESUMO
Various applications lead to the requirement of nanozymes with either specific activity or multiple enzyme-like activities. To this end, intelligent nanozymes with freely switching specificity abilities hold great promise to adapt to complicated and changeable practical conditions. Herein, a nitrogen-doped carbon-supported copper single-atom nanozyme (named Cu SA/NC) with switchable specificity is reported. Atomically dispersed active sites endow Cu SA/NC with specific peroxidase-like activity at room temperature. Furthermore, the intrinsic photothermal conversion ability of Cu SA/NC enables the specificity switch by additional laser irradiation, where photothermal-induced temperature elevation triggers the expression of oxidase-like and catalase-like activity of Cu SA/NC. For further applications in practice, a pretreatment-and-sensing integration kit (PSIK) is constructed, where Cu SA/NC can successively achieve sample pretreatment and sensitive detection by switching from multi-activity mode to specific-activity mode. This study sets the foundation for nanozymes with switchable specificity and broadens the application scope in point-of-care testing.
Assuntos
Carbono , Cobre , Cobre/química , Carbono/química , Nitrogênio/químicaRESUMO
Anaerobic fermentation is effective for waste activated sludge (WAS) disposal to realize resource generation and pollutants reduction, and various pretreatments were commonly applied to improve the performance. This work mainly investigated the effects of typical WAS pretreatment approaches on the antibiotic resistance genes (ARGs, as emerging contaminants) removal during anaerobic fermentation processes and unveiled the underlying mechanisms. The results indicated that all the pretreatment strategies exhibited evident effects on the overall ARGs removal with the order of Fe2+ activated persulfate (PS/Fe2+) > pH 10 > Ultrasonication > Heat, and showed selective removal tendency for the specific ARGs (namely easily removed (aadA1 and sul1) and persistent ARGs). Mechanistic analysis demonstrated that the pretreatments disrupted the extracellular polymeric substances (EPS) and rose the cell membrane permeability (particularly for PS/Fe2+ and Heat). Then the increased ARGs release benefitted the subsequent reduction of mobile genetic elements (MGEs) and extracellular ARGs (especially for PS/Fe2+ and pH10), resulting the ARGs attenuation. Pretreatments significantly shifted the microbial community structure and the abundances of potential ARGs hosts (i.e., Sulfuritalea, and Denitratisoma). Also, the different pretreatments exhibited distinct effects on the microbial metabolic traits related with ARGs proliferation (i.e., ABC transporters, two-component system and bacterial secretion systems), which also contributed to the ARGs attenuations during WAS fermentation. The partial least-squares path modeling (PLS-PM) analysis indicated that the bacterial community (total effects = 0.968) was key factor determining ARGs fates.
Assuntos
Genes Bacterianos , Esgotos , Esgotos/microbiologia , Fermentação , Anaerobiose , Resistência Microbiana a Medicamentos/genética , Bactérias/genética , Antibacterianos/farmacologia , Águas ResiduáriasRESUMO
Food waste (FW) contains many nutritional components such as proteins, lipids, fats, polysaccharides, carbohydrates, and metal ions, which can be reused in some processes to produce value-added products. Furthermore, FW can be converted into biogas, biohydrogen, and biodiesel, and this type of green energy can be used as an alternative to nonrenewable fuel and reduce reliance on fossil fuel sources. It has been demonstrated in many reports that at the laboratory scale production of biochemicals using FW is as good as pure carbon sources. The goal of this paper is to review approaches used globally to promote turning FW into useable products and green energy. In this context, the present review article highlights deeply in a transdisciplinary manner the sources, types, impacts, characteristics, pre-treatment strategies, and potential management of FW into value-added products. We find that FW could be upcycled into different valuable products such as eco-friendly green fuels, organic acids, bioplastics, enzymes, fertilizers, char, and single-cell protein, after the suitable pre-treatment method. The results confirmed the technical feasibility of all the reviewed transformation processes of FW. Furthermore, life cycle and techno-economic assessment studies regarding the socio-economic, environmental, and engineering aspects of FW management are discussed. The reviewed articles showed that energy recovery from FW in various forms is economically feasible.
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Alimentos , Análise Custo-Benefício , Biocombustíveis , BibliometriaRESUMO
Microcrystalline Cellulose (MCC) is an isolated, colloidal crystalline portion of cellulose fibers, and it is a valuable alternative to non-renewable fossil-based materials. It is used for a large plethora of different fields, such as composites, food applications, pharmaceutical and medical developments, and cosmetic and material industries. The interest of MCC has also been driven by its economic value. In the last decade, particular attention has been driven to the functionalization of its hydroxyl groups to expand the field of applications of such biopolymer. Herein, we report and describe several pre-treatment methods that have been developed to increase the accessibility of MCC by breaking its dense structure allowing further functionalization. This review also collects the results that have appeared in the literature during the last two decades on the utilization of functionalized MCC as adsorbents (dyes, heavy metals, and carbon dioxide), flame retardants, reinforcing agents, energetic materials, such as azide- and azidodeoxy-modified, and nitrate-based cellulose and biomedical applications.
RESUMO
The use of a coal-based energy structure generates a large amount of CO2 and NOx. The numerous emissions from these agents result in acid rain, photochemical smog, and haze. This environmental problem is considered one of the greatest challenges facing humankind in this century. Preheating combustion technology is considered an essential method for lowering the emissions of CO2 and NO. In this research, the char prepared from O2/CO2 and O2/H2O atmospheres was employed to reveal the effects of the addition of an oxidizing agent on the combustion characteristics of char. The structural features and combustion characteristics of preheated chars were determined by Raman, temperature-programmed desorption (TPD), and non-isothermal, thermo-gravimetric (TGA) experiments. According to the experimental results, the addition of oxidizing agents promoted the generation of smaller aromatic ring structures and oxygen-containing functional groups. The improvement in the surface physicochemical properties enhanced the reactivity of char and lowered its combustion activation energy. Furthermore, the combustion mechanisms of the char prepared from the O2/CO2 and O2/H2O atmospheres were investigated using the density functional theory (DFT). The simulation results illustrated that the combustion essence of char could be attributed to the migration of active atoms, the fracture of the benzene ring structure, and the reorganization of new systems. The addition of oxidizing agents weakened the conjugated components of the aromatic ring systems, promoting the successive decomposition of CO and NO. The results of this study can provide a theoretical basis for regulating the reaction atmosphere in the preheating process and promoting the development of clean combustion for high-rank coals.
Assuntos
Dióxido de Carbono , Oxigênio , Dióxido de Carbono/farmacologia , Oxigênio/química , Carvão Mineral , Atmosfera , TemperaturaRESUMO
The present study focused on the effect of different drying temperatures (40, 50, 60 and 70 °C) and combination of pre-treatments: potassium metabisulphite (KMS), potassium metabisulphite + Citric acid + blanching (KCB)] on functional, thermo-pasting and antioxidant properties of elephant foot yam (EFY) powder. Drying temperature and pretreatment reduces the water and oil absorption capacity, and the highest values were 2.34 g/g and 1.19 g/g for drying at 40 °C for the untreated sample, respectively. KMS pretreatment enhanced the bulk density, foaming capacity, emulsion capacity, and emulsion stability with an increase in drying temperature. Pasting temperature and viscosity decreased with an increase in drying temperature, and the maximum was observed at 40 °C for KMS pretreatment. Blanching increases the gelatinization temperature resulting in higher mid-and end-temperatures for KCB pretreatment. The antioxidant properties decreased with an increase in the drying temperature and were found to be minimal in the case of KCB treated samples.
RESUMO
The growing population increases the need to develop advanced biological methods for utilizing renewable and sustainable resources to produce environmentally friendly biofuels. Currently, energy resources are limited for global demand and are constantly depleting and creating environmental problems. Some higher chain alcohols, like butanol and ethanol, processing similar properties to gasoline, can be alternate sources of biofuel. However, the industrial production of these alcohols remains challenging because they cannot be efficiently produced by microbes naturally. Therefore, butanol is the most interesting biofuel candidate with a higher octane number produced naturally by microbes through Acetone-Butanol-Ethanol fermentation. Feedstock selection as the substrate is the most crucial step in biobutanol production. Lignocellulosic biomass has been widely used to produce cellulosic biobutanol using agricultural wastes and residue. Specific necessary pretreatments, fermentation strategies, bioreactor designing and kinetics, and modeling can also enhance the efficient production of biobutanol. The recent genetic engineering approaches of gene knock in, knock out, and overexpression to manipulate pathways can increase the production of biobutanol in a user friendly host organism. So far various genetic manipulation techniques like antisense RNA, TargeTron Technology and CRISPR have been used to target Clostridium acetobutylicum for biobutanol production. This review summarizes the recent research and development for the efficient production of biobutanol in various aspects.
Assuntos
Clostridium acetobutylicum , 1-Butanol/metabolismo , Acetona/metabolismo , Anaerobiose , Biocombustíveis , Biomassa , Butanóis/metabolismo , Clostridium acetobutylicum/genética , Clostridium acetobutylicum/metabolismo , Etanol/metabolismo , Fermentação , Gasolina , Octanos/metabolismo , RNA Antissenso/metabolismoRESUMO
In order to mitigate the social and ecological impacts of post-consumer plastic made of conventional petrochemical polymers, the market of (bio)degradable plastics have recently become more widespread. Although (bio)degradable plastics could be an environmentally friendly substitute of petrochemical ones, the consequences of their presence in the waste management system and in the environment (if not correctly disposed) are not always positive and plastic pollution is not automatically solved. Consequently, this work aims to review how plastic (bio)degradability affects the municipal solid waste management cycle. To this end, the state-of-the-art of the intrinsic (bio)degradability of conventional and unconventional petrochemical and bio-based polymers has been discussed, focusing on the environment related to the waste management system. Then, the focus was on strategies to improve polymer (bio)degradability: different types of eco-design and pre-treatment approach for plastics has been investigated, differently from other works that focused only on specific topics. The information gathered was used to discuss three typical disposal/treatment routes for plastic waste. Despite many of the proposed materials in eco-design have increased the plastics (bio)degradability and pre-treatments have showed interesting results, these achievements are not always positive in the current MSW management system. The effect on mechanical recycling is negative in several cases but the enhanced (bio)degradability can help the treatment with organic waste. On the other hand, the current waste treatment facility is not capable to manage this waste, leading to the incineration the most promising options. In this way, the consumption of raw materials will persist even by using (bio)degradable plastics, which strength the doubt if the solution of plastic pollution leads really on these materials. The review also highlighted the need for further research on this topic that is currently limited by the still scarce amount of (bio)degradable plastics in input to full-scale waste treatment plants.
Assuntos
Plásticos , Gerenciamento de Resíduos , Conservação dos Recursos Naturais , Reciclagem , Resíduos SólidosRESUMO
Slaker grits (SG) and biomass fly ash (BFA), two waste streams generated in the pulp and paper industry, are commonly disposed of in landfills, a practice with a high economic and environmental burden. In this work, their individual valorization as fillers in a commercial screed mortar formulation was evaluated in order to achieve a more sustainable management practice. The waste streams were characterized in terms of true density, particle size and morphology, and chemical and mineralogical composition. The influence of their incorporation amount (5.0, 7.5, and 10.0 wt.% of the total solids) and pre-treatment (sieving and grinding) on the fresh (workability) and hardened state (density, water absorption by capillarity, and flexural and compressive strength) properties of the mortars were assessed. The results show that the addition of 10.0 wt.% of the SG after milling and sieving (<75 µm) and 7.5 wt.% of BFA in the as-received condition, or up to 10.0 wt.% after grinding and sieving (<63 µm), allowed for the production of mortar samples with properties within the recommended specifications and that were resistant to 25 consecutive freeze-thaw cycles. This waste valorization route could represent an economic benefit of up to 8.85 /tmortar and 2.87 /tmortar for mortar, and pulp and paper companies, respectively.
Assuntos
Cinza de Carvão , Materiais de Construção , Cinza de Carvão/química , Biomassa , Tamanho da Partícula , Força CompressivaRESUMO
The pre-treated sweet corn samples were dried at temperatures of 55, 60, 65 and 70 °C and thin layer drying characteristics of sweet corn were assessed. Mathematical models were fitted and evaluated using R2, χ2, RMSE values. The effective diffusivities for the drying process were 4.32 × 10-10 to 1.08 × 10-9 m2/s and activation energies were 34.51 to 38.99 kJ/mol. Total sugar and ascorbic acid of dehydrated sweet corn kernels varied from 5.50 to 13.00 g/100 g and 3.30 to 10.50 mg/100 g respectively. The sample pre-treated with microwave blanching and dried at 70 °C obtained higher sensory score after rehydration, indicating suitability of the dehydrated sweet corn.
RESUMO
Near-infrared reflectance spectroscopy (NIRS) was successfully used in this study to measure soil properties, mainly C and N, requiring spectral pre-treatments. Calculations in this evaluation were carried out using multivariate statistical procedures with preceding pre-treatment procedures of the spectral data. Such transformations could remove noise, highlight features, and extract essential wavelengths for quantitative predictions. This frequently significantly improved the predictions. Since selecting the appropriate transformation was not straightforward due to the large numbers of available methods, more comprehensive insight into choosing appropriate and optimized pre-treatments was required. Therefore, the objectives of this study were (i) to compare various pre-processing transformations of spectral data to determine their suitability for modeling soil C and N using NIR spectra (55 pre-treatment procedures were tested), and (ii) to determine which wavelengths were most important for the prediction of C and N. The investigations were carried out on an arable field in South Germany with a soil type of Calcaric Fluvic Relictigleyic Phaeozem (Epigeoabruptic and Pantoclayic), created in the flooding area of the Isar River. The best fit and highest model accuracy for the C (Ct, Corg, and Ccarb) and N models in the calibration and validation modes were achieved using derivations with Savitzky-Golay (SG). This enabled us to calculate the Ct, Corg, and N with an R2 higher than 0.98/0.86 and an ratio of performance to the interquartile range (RPIQ) higher than 10.9/4.1 (calibration/validation).
RESUMO
Extraction of lipids from biological tissues is a crucial step in lipid analysis. The selection of appropriate solvent is the most critical factor in the efficient extraction of lipids. A mixture of polar (to disrupt the protein-lipid complexes) and nonpolar (to dissolve the neutral lipids) solvents are precisely selected to extract lipids efficiently. In addition, the disintegration of complex and rigid cell-wall of plants, fungi, and microalgal cells by various mechanical, chemical, and enzymatic treatments facilitate the solvent penetration and extraction of lipids. This review discusses the chloroform/methanol-based classical lipid extraction methods and modern modifications of these methods in terms of using healthy and environmentally safe solvents and rapid single-step extraction. At the same time, some adaptations were made to recover the specific lipids. In addition, the high throughput lipid extraction methodologies used for liquid chromatography-mass spectrometry (LC-MS)-based plant and animal lipidomics were discussed. The advantages and disadvantages of various pretreatments and extraction methods were also illustrated. Moreover, the emerging green solvents-based lipid extraction method, including supercritical CO2 extraction (SCE), is also discussed.
Assuntos
Parede Celular/química , Lipidômica/métodos , Lipídeos/isolamento & purificação , Solventes/química , Animais , Clorofórmio/química , Cromatografia Líquida , Química Verde , Espectrometria de Massas , Metanol/químicaRESUMO
Physical and chemical modification on biochar is an interesting approach to enhance the properties and make them potential candidates in adsorption of heavy metals from water. Studies have shown that ultrasound treatments as well as alkali activations on biochar has positive impact on adsorption behaviour of the material. Base activation on biochar derived from ultrasound pre-treated woodchips were studied to understand the influence of ultrasound pre-treatment on chemical modification of biochar and the adsorption properties emerged from it. 40 and 170 kHz ultrasound pre-treated softwood woodchips were subjected to laboratory scale pyrolysis and the resulted biochars were treated with NaOH. The physicochemical properties were examined, and the adsorption experiments revealed that ultrasound pre-treatment assisted biochars have better adsorption capacity as compared to untreated biochar samples after activation. 170 kHz pre-treated sample exhibited an equilibrium adsorption capacity of 19.99 mg/g which is almost 22 times higher than that of corresponding non-activated sample. The ultrasound pre-treated samples showed improved competitive adsorption behaviour towards copper ions in comparison with nickel or lead. The overall study suggests that ultrasound pre-treated biochars combined with alkali activation enhances the heavy metal removal efficiency and these engineered biochars can be used as an effective adsorbent in the field of wastewater treatment.
Assuntos
Metais Pesados , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Ultrassom , Água , Poluentes Químicos da Água/análiseRESUMO
Banana is a major fruit crop throughout the world with abundant lignocellulose in the pseudostem and rachis residues for biofuel production. In this study, we collected a total of 11 pseudostems and rachis samples that were originally derived from different genetic types and ecological locations of banana crops and then examined largely varied edible carbohydrates (soluble sugars, starch) and lignocellulose compositions. By performing chemical (H2SO4, NaOH) and liquid hot water (LHW) pretreatments, we also found a remarkable variation in biomass enzymatic saccharification and bioethanol production among all banana samples examined. Consequently, this study identified a desirable banana (Refen1, subgroup Pisang Awak) crop containing large amounts of edible carbohydrates and completely digestible lignocellulose, which could be combined to achieve the highest bioethanol yields of 31-38% (% dry matter), compared with previously reported ones in other bioenergy crops. Chemical analysis further indicated that the cellulose CrI and lignin G-monomer should be two major recalcitrant factors affecting biomass enzymatic saccharification in banana pseudostems and rachis. Therefore, this study not only examined rich edible carbohydrates for food in the banana pseudostems but also detected digestible lignocellulose for bioethanol production in rachis tissue, providing a strategy applicable for genetic breeding and biomass processing in banana crops.
Assuntos
Biocombustíveis , Biomassa , Temperatura Alta , Lignina/química , Musa/química , Água , HidróliseRESUMO
Deep fat frying process involves submerging a food in extremely hot oil until a safe minimum internal temperature is attained. Deep fried foods are hot and crispy on the outside and cooked safely in the center. Deep frying is very fast and, when performed properly, destroys bacteria. When water/moisture in food encounters very hot oil water vaporizes instantaneously turning into super-heated steam. It expands quickly and creates the crispy texture. Though this process has been used traditionally, the mechanism has not been described in literature and it does have downsides. The paper discusses the pretreatment methods, frying oil, frying characteristics and product quality along with the advantages and disadvantages of the process.
Assuntos
Culinária , Temperatura Alta , Alimentos , Manipulação de Alimentos , VaporRESUMO
Each year, large quantities of waste cooking oils are produced worldwide which are currently reused mainly for biodiesel production. Since lipids have a very high potential for biomethanation, the production of biogas is a possible alternative for the recycling of edible used oils. The digestion of fats is hindered mainly by their hydrophobicity, which implies a biphasic system with problems of floating and foaming of the oily materials, and by the accumulation of long-chain fatty acids, which are toxic to microbial consortia. The objectives of this review were to highlight the recycling potential of waste cooking oil to biogas production and to facilitate the application of the technology by identifying solutions to overcome biological and engineering limits to its diffusion. Particular attention was paid to the microbial populations involved, to the process factors whose control is important to improve the digestion of fats such as lipid concentration, pH, temperature, and agitation, and to technological solutions whose application also aims to improve digestion, such as pretreatment of raw materials and co-digestion of fats with other feedstocks. The state of the art in reactor designs suitable for lipid digestion was also examined.