A ratiometric fluorescence probe for bisulfite detection in live cells and meat samples.

The development of reliable probe technology for the detection of bisulfite (HSO3-) in situ in food and biological samples is contributing significantly to food quality and safety assurance as well as community health. In this work, a responsive probe, EHDI, is developed for ratiometric fluorescence detection of HSO3- in aqueous solution, meat samples, and living cells. The probe is designed based on the HSO3- triggered 1,4-addition of electron deficit C = C bond of EHDI. As a result of this specific 1,4-addition, the π-conjugation system was destructed, resulting in blue shifts of the emission from 687 to 440 nm and absorption from 577 to 355 nm. The probe has good water solubility, high sensitivity and selectivity, allowing it to be used for imaging of HSO3- internalization and production endogenously. The capability of probe EHDI for HSO3- was then validated by traditional HPLC technology, enabling accurately detect HSO3- in beef samples. The successful development of this probe thus offers a new tool for investigating HSO3- in situ in food and biological conditions.

Development of a Pyrone-Fused Tricyclic Scaffold-based Ratiometric Fluorescent Probe for Al3+ Detection.

Aluminum (Al3+) is environmentally abundant and can harm living organisms in various ways, such as by inhibiting root growth, damaging faunal nervous systems, and promoting tumor cell proliferation. However, the dynamics of Al3+ in living organisms are largely unknown; thus, detecting Al3+ in the environment and organisms is crucial. Fluorescent probes are useful tools for the selective detection of metal ions. In particular, ratiometric fluorescent probes exhibit a detection response at two different maximum fluorescence emission wavelengths; which is advantageous for avoiding the influence of background fluorescence. A novel pyrone-fused tricyclic scaffold-based ratiometric fluorescent probe for detecting Al3+, ethyl 11-imino-1-oxo-3-phenyl-1H,11H-pyrano[4,3-b] quinolizine-5-carboxylate (PQ), was developed in this study. The PQ fluorescence blue shifted from 505 to 457 nm upon the addition of Al3+. The blue shift was accompanied by a change in the fluorescence color of the PQ solution from green to blue. Fluorescence titration experiments demonstrated that the fluorescence intensity ratio at the two peaks of interest (457/505 nm) increased in a concentration-dependent manner upon the addition of Al3+. Moreover, this study demonstrated that a PQ-soaked paper displays a visible color change under ultraviolet light upon exposure to Al3+. The above results suggest that PQ is an effective ratiometric probe for the detection of Al3+ in the environment. Future studies will be conducted to introduce various substituents and develop fluorescent probes by leveraging the fluorescence property of a pyrone-fused tricyclic scaffolds.

Determination of Acetylcholinesterase Activity Based on Ratiometric Fluorescence Signal Sensing.

Acetylcholinesterase (AChE) plays an important role in the treatment of human diseases, environmental security and global food supply. In this study, the simple fluorescent indicators and MnO2 nanosheets were developed and integrated to establish a ratiometric fluorescence sensing system for the detection of AChE activity. Two fluorescence signals could be recorded independently at the same excitation wavelength, which extended the detection range and enhanced the visibility of results. Fluorescence of F-PDA was quenched by MnO2 nanosheets on account of inner filtering effect. Meanwhile, the nonfluorescent OPD was catalytically oxidized to 2,3-diaminophenazine by MnO2 nanosheets. The acetylcholine (ATCh) was catalytically hydrolyzed by AChE to enzymatic thiocholine, which decomposed MnO2 to Mn2+, recovered the fluorescence of F-PDA and reduced the emission of ox-OPD. Utilizing the fluorescence intensity ratio F468/F558 as the signal readout, the ratiometric fluorescence method was established to detect AChE activity. Under the excitation wavelength of 410 nm, the ratio F460/F558 against the AChE concentration demonstrated two linear relationships in the range 0.05 -1.0 and 1.0-50 U·L- 1 with a limit of detection (LOD) of 0.073 U·L- 1. The method was applied to the detection of AChE activity and the analysis of the inhibitor Huperzine-A. Due to the advantages of high sensitivity and favorable selectivity, the method possesses an application prospect in the activity deteceion of AChE and the screening of inhibitors.

Metal-Organic Framework Based on Ratiometric dual-Fluorescent Sensor Using for Accurate Quantification and on-Site Visual Detection of Ascorbic Acid.

Ascorbic acid is very important to the metabolic process of the body, but excessive intake can lead to diarrhea, kidney calculi and stomach cramps. However, complicated production procedures and harsh experimental settings limit many detection methods, and a simpler and more accurate measurement method is needed. In this study, a smartphone-assisted ratiometric fluorescence sensor was developed for the portable analysis of ascorbic acid. Leveraging the catalytic properties of MIL-53(Fe) to expedite the conversion of H2O2 into hydroxyl radicals, thereby facilitating the oxidation of o-phenylenediamine and terephthalic acid bridging ligand. The sensor showcased exceptional sensitivity in detecting ascorbic acid within a linear range of 0.3-100 µM, boasting an impressive limit of detection at 0.15 µM. Furthermore, through the utilization of color extraction RGB values captured by smartphones, accurate detection of ascorbic acid was achieved with a detection limit of 0.4 µM. Real fruit samples exhibited robust spiked recovery rates ranging from 91 to 119%, accompanied by relative standard deviations ≤ 4.7%. The MIL-53(Fe) nanozyme-based smartphone-assisted ratiometric fluorescence sensor offers an ascorbic acid fluorescence detection device that is visible, accurate, sensitive, and reasonably priced.

Copper-doped Lanthanide Coordination Polymers as Luminescent Nanoenzyme for Ratiometric Sensing of H2O2 and Glutathione.

Design and fabrication of integrated multifunctional probes with intrinsic catalytic and detection abilities is of great importance to simplify the operation in biosensing application with high sensitivity. Herein, dual-emitting lanthanide coordination polymers (Ln-CPs) were facilely prepared by self-assembly of guanine diphosphate (GDP), terephthalic acid (TA), Tb3+ and Cu2+ designated as Tb/Cu-GDP/TA CPs. The doped Cu2+ endowed CPs with obviously enhanced peroxidase mimicking activity compared with free Cu2+. In the presence of H2O2, the probe catalyzed the oxidation of TA generating a new blue fluorescent product, while the fluorescence of Tb3+ decreased simultaneously. Therefore, a new sensitive ratiometric fluorescent sensor for H2O2 has been developed with a good linear range from 0.01 to 300 µM and limit of 1.62 nM. Moreover, the proposed platform could be extended to GSH ratiometric assay in the presence of H2O2, and interestingly, the detection performance could be easily adjusted by adding different concentration of H2O2. This work will facilitate the development of luminescent nanoenzymes based on Ln-CPs to construct the simple ratiomatric sensing platform.

A Ratiometric Fluorescence Probe Based on Silver Nanoclusters and CdSe/ZnS Quantum dots for the Detection of Hydrogen Peroxide by Aggregation and Etching.

In this study, a ratiometric fluorescence nanoprobe is developed for the analysis of hydrogen peroxide (H2O2). Silver nanoclusters (AgNCs) were synthesized by chemical reduction method using sodium borohydride (NaBH4) as reducing agent, and were coupled with CdSe/ZnS quantum dots (QDs) to form the ratiometric fluorescence nanoprobe silver nanoclusters-quantum dots (AgNCs-QDs). The effect of the volume ratio of CdSe/ZnS QDs to AgNCs on the fluorescence ratio of AgNCs-QDs was investigated. The fluorescence characterization results show that two emission peaks of AgNCs-QDs are located at 473 nm and 661 nm, respectively. Transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) results show that H2O2 can cause the fluorescence probe to aggregate, while etching AgNCs to produce silver ions, which together cause the fluorescence of the QDs in the ratiometric fluorescent probe to be quenched. Based on this strategy, the fluorescence intensity ratio of the two emission peaks F473/F661 exhibits a strong linear correlation with the concentration of H2O2. The detection range is 3.32 µM ~ 2.65 mM with a detection limit of 3.32 µM. In addition, the ratiometric fluorescence probe can specifically recognize H2O2 and has excellent anti-interference performance and good fluorescence stability. Importantly, the probe was utilized for the detection of H2O2 in serum, showing the possibility of the probe in clinical detection applications.

Ratiometric fluorescence method comprising carbon dots and rhodamine 6G encapsulated in metal-organic framework microcubes for curcumin detection.

A ratiometric fluorescence method comprising carbon dots (CDs) and rhodamine 6G (Rh-6G) encapsulated in the microcubes of metal-organic framework (MOF-5) is introduced for the sensitive detection of curcumin (Cur) in condiments. CDs@MOF-5@Rh-6G, synthesized by the adsorption of Rh-6G on MOF-5 embedded with CDs, showed two distinct emission peaks at 435 and 560 nm under excitation at 335 nm, and could be used for Cur detection by ratiometric fluorescence. In the presence of Cur, the fluorescence of the CDs at 435 nm (F435) was quenched by Cur owing to internal filtering and dynamic quenching effects, whereas the emission of Rh-6G at 560 nm (F560) remained unchanged (335 nm is the excitation wavelength, 435 and 560 nm are the emission wavelengths, in which F435/F560 values are used as the output results). Under optimal conditions, a linear relationship was observed between the Cur concentration (in the range 0.1-5 µmol/L) and F435/F560 value for CDs@MOF-5@Rh-6G, with a detection limit of 15 nmol/L. Notably, the proposed method could accurately detect Cur in mustard, curry, and red pepper powders. Therefore, this study could improve the quality control of food and facilitate the development of sensitive ratiometric fluorescence probes.

Molecularly imprinted ratiometric fluorescence sensor for visual detection of 17ß-estradiol in milk: A generalized strategy toward imprinted ratiometric fluorescence construction.

17ß-Estradiol (E2) is the typical endocrine disruptor of steroidal estrogens and is widely used in animal husbandry and dairy processing. In the environment, even lower concentrations of E2 can cause endocrine dysfunction in organisms. Herein, we have developed a novel molecularly imprinted ratiometric fluorescent sensor based on SiO2-coated CdTe quantum dots (CdTe@SiO2) and 7-hydroxycoumarin with a post-imprint mixing strategy. The sensor selectively detected E2 in aqueous environments due to its two fluorescent signals with a self-correction function. The sensor has been successfully used for spiking a wide range of real water and milk samples. The results showed that the sensor exhibited good linearity over the concentration range 0.011-50 µg/L, obtaining satisfactory recoveries of 92.4-110.6% with precisions (RSD) < 2.5%. Moreover, this sensor obtained an ultra-low detection limit of 3.3 ng/L and a higher imprinting factor of 13.66. By using estriol (E3), as a supporting model, it was confirmed that a simple and economical ratiometric fluorescent construction strategy was provided for other hydrophobic substances.

Eu3+-functionalized covalent organic framework for ratiometric fluorescence detection and adsorption of tetracycline and information steganography.

Functional materials with organic/inorganic composites as the main matrix and rare earth ion complexes as the guest have shown a very broad application prospect for antibiotic sensors. However, Eu3+-complex often relies on a single fluorescence response signal, which is susceptible to changes in the detection environment and cannot simultaneously detect and remove tetracycline (TC). Herein, green fluorescent covalent two-dimensional organic framework (COF-TD) is synthesized, followed by modification of Eu3+ to synthesize COF-TD@Eu3+. In the ratiometric sensor, Eu3+ serves as the recognition site and specific response probe for TC, while COF-TD is the fluorescence reference and carrier for Eu3+. Due to the antenna effect, TC enhances the red fluorescence of Eu3+, while the green fluorescence of COF-TD remains almost stable. Based on the change of fluorescence intensity and fluorescence color from green to red, the efficient ratiometric sensing can be finished in 1 min. The developed method shows high sensitivity with a detection limit of 0.3 µM and high selectivity to TC which makes the method applicable to detect TC in traditional Chinese medicine preparations. In addition, due to the high specific surface area of COFs and specific adsorption sites, COF-TD@Eu3+ also shows good performance for TC removal. The findings show that the maximum adsorption capacity is 137.3 mg g-1 and the adsorption equilibrium is reached in 30 min. Smartphone assisted COF-TD@Eu3+ for both ratiometric fluorescence detection and detecting the absorption of TC is proposed for the first time. The molecular cryptosteganography that transforms the selective response of COF-TD@Eu3+ to binary strings is anticipated to advance utilization of nanomaterials in logic sensing and information safety.

Dual-mode sensing strategy based on carbon dots for sensitive and selective detection of molybdate ions.

Two kinds of carbon dots with the maximum fluorescence peak of 492 nm (named as G-CDs) and 607 nm (named as R-CDs) were synthesized. In the presence of MoO42- ions, the fluorescence of R-CDs at 607 nm can be quenched, which can probably be assigned to their aggregation caused by MoO42-, while that of G-CDs at 492 nm remained unchanged. For the first time, a ratiometric fluorescence probe was developed for MoO42- ions detection. In the range 0.25 ~ 100 µM, the fluorescence ratio (F492/F607) of the probe was linearly related to MoO42- concentration, and the detection limit was 61.5 nM, which fully meets the minimum detection requirements of MoO42- ions in drinking water. On the other hand, when MoO42- was introduced, a significant fading phenomenon of R-CDs can be observed with the naked eye; thereby, the colorimetric method can also be proposed. Based on above, the ratiometric fluorometric/colorimetric dual-mode sensing method was established for MoO42- anion quantification. Compared with the traditional analysis methods, the results obtained by multimodal sensing can be mutually verified, which effectively improves the accuracy and reliability. The dual-mode assay proposed in this work provides an alternative scheme to meet the need of sensing target compounds in complex matrices.

A ratiometric fluorescent sensor based on S-doped BCNO quantum dots and Au nanoclusters combined with 3D-printing portable device for the detection of malachite green.

Sulfur-doped BCNO quantum dots (S-BCNO QDs) emitting green fluorescence were prepared by elemental doping method. The ratiometric fluorescence probe with dual emissions was simply established by mixed S-BCNO QDs with gold nanoclusters (GSH-Au NCs). Because the emission spectrum of Au NCs (donor) at 615 nm overlapped well with the ultraviolet absorption of malachite green (MG), fluorescence resonance energy transfer (FRET) can be achieved. When the concentration of MG increased, the fluorescence intensity (F495) of S-BCNO QDs decreased slowly, while the fluorescence intensity (F615) of Au NCs decreased sharply. The fluorescence intensity ratio of F615/F495 decreased with the increase of MG. By plotting the F615/F495 values against MG concentration, a sensitive and rapid detection of MG was possible with a wide detection range (0.1-50 µM) and a low detection limit of 10 nM. Due to the accompanying fluorescence color change from pink to blue-green, it can be used for visual detection. A three dimensional-printing device utilizing digital image colorimetry to capture color changes through the built-in camera, enables quantitative detection of MG with a good linearity between the values of red/green ratio and MG concentrations at the range 1-50 µM. This sensing platform had a range of advantages, including high cost-effectiveness, portability, ease of operation, and high sensitivity. Furthermore, the sensing platform was successfully applied to the detection of MG in real water sample and fish samples, thereby verifying the reliability and effectiveness of this sensing platform in water quality monitoring and food safety.

Efficient porphyrin integrated UiO-66 probes for ratiometric fluorescence sensing of antibiotic residues in milk.

Dual-emissive fluorescence probes were designed by integrating porphyrin into the frameworks of UiO-66 for ratiometric fluorescence sensing of amoxicillin (AMX). Porphyrin integrated UiO-66 showed dual emission in the blue and red region. AMX resulted in the quenching of blue fluorescence component, attributable to the charge neutralization and hydrogen bonds induced energy transfer. AMX was detected using (F438/F654) as output signals. Two linear relationships were observed (from 10 to 1000 nM and 1 to 100 µM), with a limit of detection of 27 nM. The porphyrin integrated UiO-66 probe was used to detect AMX in practical samples. This work widens the road for the development of dual/multiple emissive fluorescence sensors for analytical applications, providing materials and theoretical supporting for food, environmental, and human safety.

Cobalt oxyhydroxide nanosheet-modulated ratiometric fluorescence platform for the selective detection of malachite green in fish.

A ratiometric fluorescence platform was developed based on the cobalt oxyhydroxide (CoOOH) nanosheet-modulated fluorescence response of blue emissive copper nanoclusters (Cu NCs) and yellow emissive o-phenylenediamine (OPD). CoOOH nanosheets showed dual function of strong absorption and oxidation ability, which can effectively quench the blue fluorescence of Cu NCs, with an excitation and emission peak maximum at 390 and 450 nm, respectively , and transfer the OPD into yellow fluorescence products, with an excitation and emission peak maximum at 390 and 560 nm, respectively. Upon introducing butyrylcholinesterase (BChE) and its substrates, CoOOH nanosheets were decomposed into Co2+, and malachite green (MG) showed strong inhibition ability to this  process. This resulted in the obvious difference on the ratio of blue and yellow fluorescence recorded on the system in the presence and absence of MG, which was utilized for the quantitative detection of MG, with a limit of detection of 0.140 µM and a coefficient of variation of 3.5%. The fluorescence ratiometric assay showed excellent detection performances in practical sample analysis.

Fluorimetric determination of tetracycline antibiotics in animal derived foods using boron and nitrogen co-doped ceria-based nanoparticles.

An innovative synthesis of boron and nitrogen co-doped ceria-based nanoparticles (B/N-CeFNPs) with bright blue fluorescence emission is reported using the hydrothermal method. Based on the aggregation-induced emission enhancement (AIEE) effect between B/N-CeFNPs and chlortetracycline (CTC), a rapid detection method for CTC through fluorescence enhancement was developed. In addition, through the electron transfer process (ET), fluorescence resonance energy transfer (FRET) effect and static quenching between B/N-CeFNPs and oxytetracycline (OTC), a ratio fluorescence strategy for detecting OTC was generated. The fluorescence of B/N-CeFNPs at 410 nm can be effectively quenched by OTC, and new fluorescence emission appears at a wavelength of 500 nm. B/N-CeFNPs showed good linear responses with CTC and OTC in the range 0.1-1 µM and 1-40 µM, respectively. This system was used to simultaneously detect the CTC and OTC in milk and honey, realizing multi-residues detection of TCs in actual samples by using the same ceria-based fluorescence nanomaterial.

Ratiometric fluorescence probe based on carbon dots and p-phenylenediamine-derived nanoparticles for the sensitive detection of manganese ions.

A ratiometric fluorescence probe based on carbon quantum dots with 420 nm emission (bCQDs) and a p-phenylenediamine-derived fluorescence probe with 550 nm emission (yprobe) is constructed for the detection of Mn2+. The presence of Mn2+ results in the enhanced absorption band at 400 nm of yprobe, and the fluorescence of yprobe is significantly enhanced based on the chelation-enhanced fluorescence mechanism. The fluorescence of bCQDs is then quenched based on the inner filtration effect. The ratio (I550/I420) linearly increases with the increase of Mn2+ concentration within 2.00 × 10-7-1.50 × 10-6 M, and the limit of detection is 1.76 × 10-9 M. Given the fluorescence color changing from blue to yellow, the visual sensing of Mn2+ is feasible based on bCQDs/yprobe coupled with RGB value analysis. The practicability of the proposed method has been verified in tap water, lake water, and sparkling water beverage, indicating that bCQDs/yprobe has promising application in Mn2+ monitoring.

Three in one: coordination-induced emission for inherent fluorescent Al-MOF synthesis combined with inner filter effect@aggregation-induced emission mechanisms for designing color tonality and ratiometric sensing platforms.

Three phenomena, namely coordination-induced emission (CIE), aggregation-induced emission (AIE), and inner filter effect (IFE), were incorporated into the design of a ratiometric and color tonality-based biosensor. Blue fluorescent Al-based metal-organic frameworks (FMIL-96) were prepared from non-emissive ligand and aluminum ions via CIE. Interestingly, the addition of tetracycline (TC) led to ratiometric detection and color tonality, as the blue emission at 380 nm was quenched (when excited at 350 nm) due to IFE, while the green-yellowish emission at 525 nm was enhanced due to AIE. Based on that, an ultra-sensitive visual-based color tonality mode with smartphone assistance was developed for detection of TC. The sensor exhibited a linear relationship within a broad range of 2.0 to 85.0 µM TC with a detection limit of 68.0 nM. TC in milk samples was quantified with high accuracy and precision. This integration of smartphone and visual fluorescence in solution is accurate, reliable, cost-effective, and time-saving, providing an alternative strategy for the semi-quantitative determination of TC on-site.

A Ratiometric Fluorescence Detection Method for Berberine Using Triplex-Containing DNA-Templated Silver Nanoclusters.

Berberine (BBR), as a natural isoquinoline alkaloid, has demonstrated various pharmacological activities, and is widely applied in the treatment of diseases. The quantitative analysis of BBR is important for pharmacological studies and clinical applications. In this work, utilizing the specific interaction between BBR and triplex DNA, a sensitive and selective fluorescent detecting method was established with DNA-templated silver nanoclusters (DNA-AgNCs). After binding with the triplex structure in the template of DNA-AgNCs, BBR quenched the fluorescence of DNA-AgNCs and formed BBR-triplex complex with yellow-green fluorescence. The ratiometric fluorescence signal showed a linear relationship with BBR concentration in a range from 10 nM to 1000 nM, with a detection limit of 10 nM. Our method exhibited excellent sensitivity and selectivity, and was further applied in BBR detection in real samples.

A label-free ratiometric fluorescent aptasensor based on a peroxidase-mimetic multifunctional ZrFe-MOF for the determination of tetrodotoxin.

A Fe/Zr bimetal-organic framework (ZrFe-MOF) is utilized to establish a ratiometric fluorescent aptasensor for the determination of tetrodotoxin (TTX). The multifunctional ZrFe-MOF possesses inherent fluorescence at 445 nm wavelength, peroxidase-mimetic activity, and specific recognition and adsorption capabilities for aptamers, owing to its organic ligand, and Fe and Zr nodes. The peroxidation of o-phenylenediamine (OPD) substrate generates fluorescent 2,3-diaminophenazine (OPDox) at 555 nm wavelength, thus quenching the inherent fluorescence of ZrFe-MOF because of the fluorescence resonance energy transfer (FRET) effect. TTX aptamers, which are absorbed on the material surface without immobilization or fluorescent labeling, inhibit the peroxidase-mimetic activity of ZrFe-MOF. It causes the decreased OPDox fluorescence at 555 nm wavelength and the inverse restoration of ZrFe-MOF fluorescence at 445 nm wavelength. With TTX, the aptamers specifically bind to TTX, triggering rigid complex release from ZrFe-MOF surface and reactivating its peroxidase-mimetic activity. Consequently, the two fluorescence signals exhibit opposite changes. Employing this ratiometric strategy, the determination of TTX is achieved with a detection limit of 0.027 ng/mL and a linear range of 0.05-500 ng/mL. This aptasensor also successfully determines TTX concentrations in puffer fish and clam samples, demonstrating its promising application for monitoring trace TTX in food safety.

Dual-state dual emission from precise chemically engineered bi-ligand MOF free from encapsulation and functionalization with self-calibration model for visual detection.

Synthesis of dual-state dual emitting metal-organic frameworks (DSDE-MOFs) is uncommon and challenging. Additionally, DSDE-MOFs can fulfil the expanding need for on-site detection due to their stability and self-reference for a variety of non-analyte variables. In the present work, a novel intrinsic DSDE of chemically engineered bi-ligand Eu-based MOF (UoZ-1) was designed. The prepared UoZ-1 spherical particles were small-sized around 10-12 nm and displayed blue (425 nm) and red fluorescence (620 nm) at both states, dispersed in liquid and in solid state, when excited at 250 nm. A ratiometry platform was developed since the red emission was quenched by the addition of folic acid and the blue emission was almost remained unaffected. In the fluorometric ratiometric-mode, a dynamic linear range was recorded from 10 to 200 µM with LOD about 0.4 µM. Visual-based detection with assistance of smartphone was developed for quantification based on RGB analysis using Color Grab App. In the visual-mode, LOD as small as 2.3 µM was recorded. By utilizing the intrinsic dual-emitting UoZ-1, highly stable, recyclable, sensitive, and selective on-site visual detection of folic acid can be achieved. UoZ-1, a DSDE-MOF with no encapsulation or functionalization requirements, exhibits great potential for diverse applications.

Design of a dual-mode ratiometric fluorescent probe via MOF-on-MOF strategy for Al (III) and pH detection.

BACKGROUND: The construction of ratiometric fluorescent MOF sensors with integrated self-calibration and dual-channel detection can efficiently overcome the deficiencies of single-signal sensing. In this regard, the rational design of structurally functionalized MOFs is paramount for enhancing their performance in ratiometric fluorescent sensors. Lately, the concept of MOF-on-MOF design has garnered notable interest as a potential strategy for regulating the structural parameters of MOFs by integrating two or more distinct MOF types. Great efforts have been dedicated to exploring new MOF-on-MOF hybrids and developing their applications in diverse fields. Even so, these materials are still in the stage of advancement in the sensing field. RESULTS: Herein, a Zr-based metal-organic framework anchored on a rare-earth metal-organic framework (UiO-66(OH)2@Y-TCPP) was prepared for the ratiometric fluorescence detection toward Al (III) and pH. In this probe, the UiO-66(OH)2 featured hydroxyl active sites for Al (III), leading to a significant enhancement in fluorescence intensity upon the addition of Al (III), while the signal emitted by the red-emitting Y-TCPP, serving as the reference, remained constant. UiO-66(OH)2@Y-TCPP exhibited excellent selectivity for Al (III) sensing with a wider linear range of 0.1-1000 µM, and a lower detection limit of 0.06 µM. This probe has also been utilized for the quantitative determination of Al (III) in hydrotalcite chewable tablets with satisfactory results. In addition, the probe realized ratiometric pH sensing in the range of 7-13 using UiO-66(OH)2 as an interior reference. The paper-based probe strip was developed for visual pH sensing. By installing color recognition and processing software on a smartphone, real-time and convenient pH sensing could be achieved. SIGNIFICANCE: This is the first ratiometric fluorescent sensor for Al (III) and pH detection based on a MOF-on-MOF composite probe, which yields two different response modes. The detection results of Al (III) in hydrotalcite chewable tables and smartphone imaging for pH test paper demonstrate the practicability of the probe. This work opens up a new outlook on constructing a multi-functional application platform with substantial potential for employment in environmental and biological analysis tasks.