Rational Design of Bifunctional Microporous Organic Polymers Containing Anthracene and Triphenylamine Units for Energy Storage and Biological Applications.

In this study, we synthesized two conjugated microporous polymers (CMPs), An-Ph-TPA and An-Ph-Py CMPs, using the Suzuki cross-coupling reaction. These CMPs are organic polymers with p-conjugated skeletons and persistent micro-porosity and contain anthracene (An) moieties linked to triphenylamine (TPA) and pyrene (Py) units. We characterized the chemical structures, porosities, thermal stabilities, and morphologies of the newly synthesized An-CMPs using spectroscopic, microscopic, and N2 adsorption/desorption isotherm techniques. Our results from thermogravimetric analysis (TGA) showed that the An-Ph-TPA CMP displayed better thermal stability with Td10 = 467 °C and char yield of 57 wt% compared to the An-Ph-Py CMP with Td10 = 355 °C and char yield of 54 wt%. Furthermore, we evaluated the electrochemical performance of the An-linked CMPs and found that the An-Ph-TPA CMP had a higher capacitance of 116 F g-1 and better capacitance stability of 97% over 5000 cycles at 10 A g-1. In addition, we assessed the biocompatibility and cytotoxicity of An-linked CMPs using the MTT assay and a live/dead cell viability assay and observed that they were non-toxic and biocompatible with high cell viability values after 24 or 48 h of incubation. These findings suggest that the An-based CMPs synthesized in this study have potential applications in electrochemical testing and the biological field.

Novel D-A-π-A1 Type Organic Sensitizers from 4,7-Dibromobenzo[d][1,2,3]thiadiazole and Indoline Donors for Dye-Sensitized Solar Cells.

Two novel D-A-π-A1 metal-free organic dyes of the KEA series containing benzo[d][1,2,3]thiadiazole (isoBT) internal acceptor, indoline donors fused with cyclopentane or cyclohexane rings (D), a thiophene as a π-spacer, and a cyanoacrylate as an anchor part were synthesized. Monoarylation of 4,7-dibromobenzo[d][1,2,3]thiadiazole by Suzuki-Miyamura cross-coupling reaction showed that in the case of indoline and carbazole donors, the reaction was non-selective, i.e., two monosubstituted derivatives were isolated in each case, whereas only one mono-isomer was formed with phenyl- and 2-thienylboronic acids. This was explained by the fact that heterocyclic indoline and carbazole fragments are much stronger donor groups compared to thiophene and benzene, as confirmed by cyclic voltammetry measurements and calculation of HOMO energies of indoline, carbazole, thiophene and benzene molecules. The structure of monoaryl(hetaryl) derivatives was strictly proven by NMR spectroscopy and X-ray diffraction. The optical and photovoltaic properties observed for the KEA dyes showed that these compounds are promising for the creation of solar cells. A comparison with symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 showed that the asymmetric nature of benzo[d][1,2,3]thiadiazole KEA dyes leads to a hypsochromic shift of the ICT band in comparison with the corresponding benzo[c][1,2,5]thiadiazole isomers. KEA dyes have a narrow HOMO-LUMO gap of 1.5-1.6 eV. Amongst these dyes, KEA321 recorded the best power efficiency (PCE), i.e., 5.17%, which is superior to the corresponding symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 (5.07 and 4.90%).

Pd(NHC)(cinnamyl)Cl-catalyzed Suzuki cross-coupling reaction of aryl sulfonates with arylboronic acids.

A series of N-heterocyclic carbene (NHC)-palladium catalysts have been synthesized and applied to catalyze the Suzuki coupling reaction efficiently between aryl sulfonates and arylboronic acids with the potassium phosphate heptahydrate as a base. The desired yields are obtained even with less reactive aryl tosylates or aryl mesylates as substrates. This method was applied successfully to the synthesis of the (R)-2-(t-butoxycarbonylamino)-3-(biphenyl-4-yl)-propan-1-ol which is the key intermediate of sacubitril, a component of the newly approved antihypertensive drug "Entresto."

1-Hydroxyanthraquinones Containing Aryl Substituents as Potent and Selective Anticancer Agents.

A series of 1,2-, 1,4-disubstituted or 1,2,4-trisubstituted anthraquinone-based compounds was designed, synthesized, characterized and biologically evaluated for anticancer efficacy. 2- or 4-arylated 1-hydroxy-9,10-antraquinones (anthracene-9,10-diones) were prepared by Suzuki-Miyaura cross-coupling reaction of 1-hydroxy-2-bromoanthraquinone, 1-hydroxy-4-iodoanthraquinone or 1-hydroxy-2,4-dibromoanthraquinone with arylboronic acids. The cross-coupling reaction of 2,4-dibromo-9,10-anthraquinone with arylboronic acids provide a convenient approach to 2,4-bis arylated 1-hydroxyanthraquinones with a variety of aryl substituent in the 2 and 4 position. The cytotoxicity of new anthraquinone derivatives was evaluated using the conventional MTT assays. The data revealed that six of the aryl substituted compounds among the entire series 3, 15, 16, 25, 27, 28 were comparable potent with the commercially available reference drug doxorubicin on the human glioblastoma cells SNB-19, prostate cancer DU-145 or breast cancer cells MDA-MB-231 and were relatively safe towards human telomerase (h-TERT)immortalized lung fibroblasts cells. The results suggested that the in vitro antitumor activity of synthesized 2-aryl, 4-aryl- and 2,4-diaryl substituted 1-hydroxyanthraquinones depends on the nature of the substituent within the cyclic backbone. Docking interaction of 2-, 4-substituted and 2,4-disubstituted 1-hydroxyanthraquinones indicates intercalative mode of binding of compounds with DNA topoisomerase. The interaction with the DNA of 4-aryl-13, 15, 16 and 4-(furan-3-yl)-23 1-hydroxyanthraquinones was experimentally confirmed through a change in electroforetic mobility. Further experiments with 1-hydroxy-4-phenyl-anthraquinone 13 demonstrated that the compound induced cell cycle arrest at sub-G1 phase in DU-145 cells in the concentration 1.1 µM, which is probably achieved by inducing apoptosis. 4-Arylsubstituted 1-hydroxyanthraquinones 13 and 16 induced the enhancement of DNA synthesis on SNB19 cell lines.

Pd Nanocatalyst Adorned on Magnetic Chitosan@N-Heterocyclic Carbene: Eco-Compatible Suzuki Cross-Coupling Reaction.

A novel magnetic-functionalized-multi-walled carbon nanotubes@chitosan N-heterocyclic carbene-palladium (M-f-MWCNTs@chitosan-NHC-Pd) nanocatalyst is developed in two steps. The first step entails the fabrication of a three-component cross-linking of chitosan utilizing the Debus-Radziszewski imidazole approach. The second step comprised the covalent grafting of prepared cross-linked chitosan to the outer walls of magnetically functionalized MWCNTs (M-f-MWCNTs) followed by introducing PdCl2 to generate the m-f-MWCNTs@cross-linked chitosan with a novel NHC ligand. The repeated units of the amino group in the chitosan polymer chain provide the synthesis of several imidazole units which also increase the number of Pd linkers thus leading to higher catalyst efficiency. The evaluation of catalytic activity was examined in the expeditious synthesis of biaryl compounds using the Suzuki cross-coupling reaction of various aryl halides and aryl boronic acids; ensuing results show the general applicability of nanocatalyst with superior conversion reaction yields, high turnover frequencies (TOFs) and turnover numbers (TON). Meanwhile, nanocatalyst showed admirable potential in reusability tests, being recycled for five runs without losing significant activities under optimum reaction conditions. The successfully synthesis of catalyst and its characterization was confirmed using the Fourier transform infrared spectrometer (FT-IR), spectrometer transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photo-electron spectroscopy (XPS) and thermogravimetric analysis (TGA).

Efficient Synthesis of Novel Pyridine-Based Derivatives via Suzuki Cross-Coupling Reaction of Commercially Available 5-Bromo-2-methylpyridin-3-amine: Quantum Mechanical Investigations and Biological Activities.

The present study describes palladium-catalyzed one pot Suzuki cross-coupling reaction to synthesize a series of novel pyridine derivatives 2a-2i, 4a-4i. In brief, Suzuki cross-coupling reaction of 5-bromo-2-methylpyridin-3-amine (1) directly or via N-[5-bromo-2-methylpyridine-3-yl]acetamide (3) with several arylboronic acids produced these novel pyridine derivatives in moderate to good yield. Density functional theory (DFT) studies were carried out for the pyridine derivatives 2a-2i and 4a-4i by using B3LYP/6-31G(d,p) basis with the help of GAUSSIAN 09 suite programme. The frontier molecular orbitals analysis, reactivity indices, molecular electrostatic potential and dipole measurements with the help of DFT methods, described the possible reaction pathways and potential candidates as chiral dopants for liquid crystals. The anti-thrombolytic, biofilm inhibition and haemolytic activities of pyridine derivatives were also investigated. In particular, the compound 4b exhibited the highest percentage lysis value (41.32%) against clot formation in human blood among all newly synthesized compounds. In addition, the compound 4f was found to be the most potent against Escherichia coli with an inhibition value of 91.95%. The rest of the pyridine derivatives displayed moderate biological activities.

Efficient Double Suzuki Cross-Coupling Reactions of 2,5-Dibromo-3-hexylthiophene: Anti-Tumor, Haemolytic, Anti-Thrombolytic and Biofilm Inhibition Studies.

The present study describes several novel 2,5-biaryl-3-hexylthiophene derivatives (3a-i) synthesized via a Pd(0)-catalyzed Suzuki cross-coupling reaction in moderate to good yields. The novel compounds were also analyzed for their anti-thrombolytic, haemolytic, and biofilm inhibition activities. In addition, the anti-tumor activity was also evaluated in vitro for newly-synthesized compounds, where 3-hexyl-2,5-bis(4-(methylthio)phenyl)thiophene exhibited the best anti-tumor activity against 4T1 cells with IC50 value of 16 µM. Moreover, 2,5-bis(4-methylphenyl)-3-hexylthiophene showed the highest activity against MCF-7 cells with an IC50 value of 26.2 µM. On the other hand, the compound 2,5-bis(4-chloropheny)-3-hexylthiophene exhibited excellent biofilm inhibition activity. Furthermore, the compound 2,5-bis(3-chloro-4-fluorophenyl)-3-hexylthiophene also exhibited better anti-thrombolytic and hemolytic activity results as compared to the other newly-synthesized compounds.

Synthesis and Characterization of Poly(5'-hexyloxy-1',4-biphenyl)-b-poly(2',4'-bispropoxysulfonate-1',4-biphenyl) with High Ion Exchange Capacity for Proton Exchange Membrane Fuel Cell Applications.

Proton exchange membrane (PEM) is pivotal for proton exchange membrane fuel cells (PEMFCs). In the present work, a block copolymer with hydrophilic alkyl sulfonated side groups and hydrophobic flexible alkyl ether side groups, poly(5'-hexyloxy-1',4-biphenyl)-b-poly(2',4'-bispropoxysulfonate-1',4-biphenyl) (HBP-b-xBPSBP), is designed and synthesized by copolymerization of the hydrophilic and hydrophobic oligomers. The oligomers are synthesized via a Pd-catalyzed Suzuki cross-coupling of 1,3-dibromo-5-hexyloxybenzene, and 3,3'-[(4,6-dibromo-1,3-phenylene)bis(oxy)]bis(propane-1-sulfonate) or 1,4-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzene. The good solubility and film-forming characteristics are achieved via the introduction of flexible hexyloxy side groups, and high ion exchange capacity (IEC) is achieved via the introduction of high density of alkyl sulfonated side groups. The HBP-b-0.5BPSBP has the highest IEC of 3.17 mmol/g, the highest proton conductivity of 43.5 mS/cm at 95 °C and 90% relative humidity (RH) and low methanol permeability of 6.45×10-7  cm2 /s. Meanwhile, crosslinked HBP-b-xBPSBP exhibits promising water uptake, swelling ratio and low methanol permeability. These characteristics are attributed to the crosslinked structure and the hydrophilic/hydrophobic nanophase separation morphology promoted by the poly(m-phenylene) main chains, flexible alkyl ether groups, and alkyl sulfonated side groups.

Design, synthesis, and spasmolytic activity of thiophene-based derivatives via Suzuki cross-coupling reaction of 5-bromothiophene-2-carboxylic acid: their structural and computational studies.

In the current research work, a facile synthesis of a series of novel thiophene-based derivatives of 5-bromothiophene-2-carboxylic acid ( 1 ) have been synthesized. All analogs ( 5a - 5e , 10a - 10f ) were obtained from the coupling reaction of 5-bromothiophene-2-carboxylic acid ( 1 ) and different arylboronic acids with moderate-to-good yields under controlled and optimal conditions. The structures of the newly synthesized compounds were characterized through spectral analysis and their spasmolytic activity, and most of the compounds exhibited potentially good spasmolytic effect. Among the synthesized analogs, compound phenethyl 5-(3,4-dichlorophenyl)thiophene-2-carboxylate ( 10d ) particular showed an excellent spasmolytic effect with an EC 50 value of 1.26. All of the compounds were also studied for their structural and electronic properties by density functional theory (DFT) calculations. Through detailed insight into frontier molecular orbitals of the compounds and their different reactivity descriptors, it was found that the compounds 10c and 5c are the most reactive, while 10a is the most stable in the series. Furthermore, compounds 10c and 5c showed a very good NLO response with the highest ß values.

Sterically Hindered Phosphonium Salts: Structure, Properties and Palladium Nanoparticle Stabilization.

A new family of sterically hindered alkyl(tri-tert-butyl) phosphonium salts (n-CnH2n+1 with n = 2, 4, 6, 8, 10, 12, 14, 16, 18, 20) was synthesized and evaluated as stabilizers for the formation of palladium nanoparticles (PdNPs), and the prepared PdNPs, stabilized by a series of phosphonium salts, were applied as catalysts of the Suzuki cross-coupling reaction. All investigated phosphonium salts were found to be excellent stabilizers of metal nanoparticles of small catalytically active size with a narrow size distribution. In addition, palladium nanoparticles exhibited exceptional stability: the presence of phosphonium salts prevented agglomeration and precipitation during the catalytic reaction.

Thiol-Functionalized Ethylene Periodic Mesoporous Organosilica as an Efficient Scavenger for Palladium: Confirming the Homogeneous Character of the Suzuki Reaction.

This work describes the synthesis of thiol-functionalized periodic mesoporous organosilicas (PMOs) prepared using the precursor 1-thiol-1,2-bis(triethoxysilyl)ethane, alone or mixed with 1,2-bis(triethoxysilyl)ethane. The thiol groups incorporated into the structure were found to be efficient for palladium binding. This has allowed these materials to be used as catalysts in the Suzuki cross-coupling reaction of bromobenzene and phenylboronic acid. Their performance has been compared to palladium-supported periodic mesoporous (organo)silicas and important differences have been observed between them. The use of different heterogeneity tests, such as hot filtration test and poisoning experiments, has provided a deep insight into the reaction mechanism and has confirmed that the reaction occurs in the homogeneous phase following a "release and catch" mechanism. Furthermore, the thiol-functionalized periodic mesoporous organosilica, synthesized using only 1-thiol-1,2-bis(triethoxysilyl)ethane as a precursor, has proven to be an efficient palladium scavenger.

N-Methylimidazole functionalized carboxymethycellulose-supported Pd catalyst and its applications in Suzuki cross-coupling reaction.

In this paper, N-Methylimidazole functionalized carboxymethylcellulose-supported palladium nanoparticles (CMC-NHC-Pd) was synthesized and characterized by TEM, SEM, EDX, CP/MAS 13C NMR, FT-IR, TGA, XRD, and XPS analysis. The prepared nanoparticles can be used as an environmentally-friendly and trifunctional catalyst. The well-designed CMC supported palladium nanoparticles catalyst with polydentate ligands is also stable and efficient for Suzuki cross-coupling reactions under mild conditions through the cooperative interaction of trifunctional capturing sites with palladium, -COO-, -OH and N-Methylimidazole. This catalyst can be readily recovered by a few cycles of simple filtration. This work proposes a plausible trifunctional catalyst complex.

Palladium acetate supported on amidoxime-functionalized magnetic cellulose: Synthesis, DFT study and application in Suzuki reaction.

A highly efficient and magnetically retrievable catalytic system involving Pd (II) acetate supported on amidoxime-functionalized cellulose nano-magnetic catalyst (nano-Fe3O4@AOFC/Pd(II)) was prepared. The structure of the organic-inorganic hybrid nanocomposite has been confirmed using various physicochemical techniques such as FT-IR, XRD, TGA, VSM, XPS, HRTEM, SAED, SEM, CHNS, EDAS and ICP-OES. In addition, to describe and go insight to the metal-ligand interactions present in the nano-Fe3O4@AOFC/Pd (II) composite, covalent and electrostatic interactions, density functional theory (DFT) model and quantum theory of atoms in molecule method were employed. The resultant nano-magnetic cellulose composite exhibits remarkable catalytic efficacy used for Suzuki cross-coupling reaction between aryl halides and aryl boronic acids to create the corresponding coupling products in good to excellent yields. Also, the catalyst is easily recovered using only an external magnet. Its recoverability and reusability for this catalyst was examined in several runs which showed no appreciable loss after five runs. The facile accessibility to the starting materials, possible performance in large scales, and conducting the reactions in the eco-friendly and cost-effective conditions are the other merits which can be mentioned for such new Pd -catalyst.

Cellulose-supported N-heterocyclic carbene-palladium catalyst: synthesis and its applications in the Suzuki cross-coupling reaction.

A cellulose-supported N-methylimidazole-palladium catalyst (Cell-NHC-Pd) was synthesized and used for Suzuki cross-coupling reactions between aryl halides and phenylboronic acids to create the corresponding coupling products in good to excellent yields. Moreover, the catalyst is easily recovered using only a few cycles of simple filtration.

Novel 3-aryl indoles as progesterone receptor antagonists for uterine fibroids.

We report the synthesis and characterization of novel 3-aryl indoles as potent and efficacious progesterone receptor (PR) antagonists with potential for the treatment of uterine fibroids. These compounds demonstrated excellent selectivity over other steroid nuclear hormone receptors such as the mineralocorticoid receptor (MR). They were prepared from 2-bromo-6-nitro indole in four to six steps using a Suzuki cross-coupling as the key step. Compound 8f was orally active in the complement 3 model of progesterone antagonism in the rat uterus and demonstrated partial antagonism in the McPhail model of progesterone activity.