Crystalline C3N3H3 tube (3,0) nanothreads.

Carbon nanothread (CNTh) is a "one-dimensional diamond polymer" that combines high tensile strength and flexibility, but it severely suffers from intrathread disorder. Here, by modifying the reactivity and the stacking ordering of the aromatic precursor, crystalline C3N3H3 CNTh with perfect hexagonal orientation and stacking was synthesized at 10.2 GPa and 573 K from s-triazine. By Rietveld refinement of X-ray diffraction data, gas chromatography mass spectrometry investigation, and theoretical calculation, we found that synthesized CNTh has a tube (3,0) structure, with the repeating s-triazine residue connected solely by C­N bonds along the thread. A "peri-cage" reaction, the concerted bonding between six C and N atoms, instead of [4 + 2] or [1,4] addition reactions, was concluded for the formation of CNThs, and the critical bonding distance between the nearest intermolecular C and N was ∼2.9 Å. The formation of a "structure-specific" crystalline CNTh with C and N orderly distributed highlighted the importance of reaction selectivity and stacking order of reactant molecules, which have great significance for understanding the polymerization of aromatic molecules under high pressure and developing new crystalline CNThs.

Ab initio investigation of excited state charge transfer pathways in differently capped bithiophene cages.

The electronic excitations of conformationally constrained bithiophene cage systems as previously investigated by Lewis et al. (J. Am. Chem. Soc. 143, 18548 (2021)) are revisited, employing the correlated ab initio Scaled Opposite-Spin Algebraic Diagrammatic Construction Second Order electronic structure method. Quantitative descriptors are determined to assess the extent of charge transfer between the bithiophene moieties and the capping domains, represented by either phenyl or triazine groups. The investigation substantiates intrinsic differences in the photophysical behavior of these two structural variants and reveals the presence of lower-energy excited states characterized by noteworthy charge transfer contributions in the triazine cage system. The manifestation of this charge transfer character is discernible even at the Franck-Condon geometry, persisting throughout the relaxation of the excited state. By examining isolated monomer building blocks, we confirm the existence of analogous charge transfer contributions in their excitations. Employing this methodological approach facilitates the prospective identification of potential wall/cap chromophore pairs, wherein charge transfer pathways can be accessed within the energetically favorable regime.

Strategies for Enhancing the Photocatalytic and Electrocatalytic Efficiency of Covalent Triazine Frameworks for CO2 Reduction.

Converting carbon dioxide (CO2) into fuel and high-value-added chemicals is considered a green and effective way to solve global energy and environmental problems. Covalent triazine frameworks (CTFs) are extensively utilized as an emerging catalyst for photo/electrocatalytic CO2 reduction reaction (CO2RR) recently recognized for their distinctive qualities, including excellent thermal and chemical stability, π-conjugated structure, rich nitrogen content, and a strong affinity for CO2, etc. Nevertheless, single-component CTFs have the problems of accelerated recombination of photoexcited electron-hole pairs and restricted conductivity, which limit their application for photo/electrocatalytic CO2RR. Therefore, emphasis will then summarize the strategies for enhancing the photocatalytic and electrocatalytic efficiency of CTFs for CO2RR in this paper, including atom doping, constructing a heterojunction structure, etc. This review first illustrates the synthesis strategies of CTFs and the advantages of CTFs in the field of photo/electrocatalytic CO2RR. Subsequently, the mechanism of CTF-based materials in photo/electrocatalytic CO2RR is described. Lastly, the challenges and future prospects of CTFs in photo/electrocatalytic CO2RR are addressed, which offers a fresh perspective for the future development of CTFs in photo/electrocatalytic CO2RR.

Theory-Guided Experimental Design of Covalent Triazine Frameworks for Efficient Photocatalytic Hydrogen Production.

The high crystalline covalent triazine framework-1 (CTF-1), composed of alternating triazine and phenylene, has emerged as an efficient photocatalyst for solar-driven hydrogen evolution reaction (HER). However, it is of great challenge to further improve photocatalytic HER performance via increasing crystallinity due to its near-perfect crystallization. Herein, an alternative strategy of scaffold functionalization is employed to optimize the energy band structure of crystalline CTF-1 for boosting hydrogen-evolving activity. Guided by the computational predictions, versatile CTF-based polymer photocatalysts are prepared with different functional groups (OH, NH2, COOH) using binary polymerization for practical hydrogen production. Experiment evidence verifies that the introduction of a limited number of electron-donating groups is sufficient to maintain high crystallinity in CTF, modulate the band structure, broaden visible light absorption, and consequently enhance its photophysical properties. Notably, the functionalization with OH exhibits the most positive effect on CTF-1, delivering a photocatalytic activity with a hydrogen-producing rate exceeding 100 µmol h-1.

Layered S-Bridged Covalent Triazine Frameworks via a Bifunctional Template-Catalytic Strategy Enabling High-Performance Zinc-Ion Hybrid Supercapacitors.

Exploring covalent triazine frameworks (CTFs) with high capacitative activity is highly desirable and challenging. Herein, the S-rich CTFs cathode is pioneeringly introduced in Zn-ion hybrid supercapacitors (ZSC), achieving outstanding capacity and energy density, and satisfactory anti-freezing flexibility. Specifically, the S-bridged CTFs are synthesized by a bifunctional template-catalytic strategy, where ZnCl2 serves as both the catalyst/solvent and in situ template to construct triazine frameworks with interconnected pores and layered gaps. The resultant CTFs (CTFS-750) are employed as a reasonable pattern-like system to more deeply scrutinize the synergistic effect of S-bridged triazine and layered porous architecture for polymer-based cathodes in Zn-ion storage. The experimental results indicate that the adsorption barriers of Zn-ions on CTFS-750 are effectively weakened, and accessible Zn2+ -absorption sites provided by the C─S─C and C═N bonds have been confirmed via DFT calculations. Consequently, the CTFS-750 cathode-assembled ZSC displays an ultra-high capacity of 211.6 mAh g-1 at 1.0 A g-1 , an outstanding energy density of 202.7 Wh kg-1 , and attractive cycling performance. Moreover, the resulting flexible ZSC device shows superior capacity, good adaptability, and satisfactory anti-freezing behavior. This approach sheds new light on constructing advanced polymer-based cathodes at the atom level and paves the way for fabricating high-performance ZSC and beyond.

Intramolecular Quaternary Carbon Nitride Homojunction for Enhanced Visible Light Hydrogen Production.

In this work, an intramolecular carbon nitride (CN)-based quaternary homojunction functionalized with pyridine rings is prepared via an in situ alkali-assisted copolymerization strategy of bulk CN and 2-aminopyridine for efficient visible light hydrogen generation. In the obtained structure, triazine-based CN (TCN), heptazine-based CN (HCN), pyridine unit incorporated TCN, and pyridine ring inserted HCN constitute a special multicomponent system and form a built-in electric field between the crystalline semiconductors by the arrangement of energy band levels. The electron-withdrawing function of the conjugated heterocycle can trigger the skeleton delocalization and edge induction effect. Highly accelerated photoelectron-hole transfer rates via multi-stepwise charge migration pathways are achieved by the synergistic effect of the functional group modification and molecular quaternary homojunction. Under the addition of 5 mg 2-aminopyridine, the resulting homojunction framework exhibits a significantly improved hydrogen evolution rate of 6.64 mmol g-1 h-1 with an apparent quantum efficiency of 12.27% at 420 nm. Further, the catalyst verifies its potential commercial value since it can produce hydrogen from various real water environments. This study provides a reliable way for the rational design and fabrication of intramolecular multi-homojunction to obtain high-efficient photocatalytic reactions.

A Dual-Active Covalent Triazine Framework Film for Efficient Visible-Light-Driven Hydrogen Peroxide Production.

Photocatalytic hydrogen peroxide production from water and oxygen offers a clean and sustainable alternative to the conventional energy-intensive anthraquinone oxidation method. Compared to powdered covalent triazine frameworks (CTFs), the film morphology of CTFs provides better connectivity in 2D, yielding several advantages: more efficient connections between active sites, reduced electron-hole pair recombination, increased resistance to superoxide radical induced corrosion, and decreased light scattering. Leveraging these benefits, it has incorporated dual active sites for both the oxygen reduction reaction (ORR) and the water oxidation reaction (WOR) into a CTF film system. This dual-active CTF film demonstrated an exceptional hydrogen peroxide production rate of 19 460 µmol h⁻¹ m⁻2 after 1 h and 17 830 µmol h⁻¹ m⁻2 after 5 h under visible light irradiation (≥420 nm) without the need for sacrificial agents.

Dual Heterojunction of Etched MIL-68(In)-NH2 Supported Heptazine-/Triazine-Based Carbon Nitride for Improved Visible-Light Nitrogen Reduction.

This work reports a dual heterojunction of etched MIL-68(In)-NH2 (MN) supported heptazine-/triazine-based carbon nitride (HTCN) via a facile hydrothermal process for photocatalytic ammonia (NH3 ) synthesis. By applying the hydrothermal treatment, MN microrods are chemically etched into hollow microtubes, and HTCN with nanorod array structures are simultaneously tightly anchored on the outside surface of the microtubes. With the addition of 9 wt% HTCN, the resulting dual heterojunction presents an enhanced photocatalytic ammonia yield rate of 5.57 mm gcat -1 h-1 with an apparent quantum efficiency of 10.89% at 420 nm. Moreover, stable ammonia generation using seawater, tap water, lake water, and turbid water in the absence of sacrificial reagents verifies the potential of the dual-heterojunction composites as a commercially viable photosystem. The obtained one-dimensional (1D) microtubes and coating of HTCN confers this unique composite with extended visible-light harvesting and accelerated charge carrier migration via a multi-stepwise charge transfer pathway. This work provides a new strategy for optimizing nitrogen (N2 )-into-ammonia conversion efficiency by designing novel dual-heterojunction catalysts.

Matched Redox Kinetics on Triazine-Based Carbon Nitride/Ni(OH)2 for Stoichiometric Overall Photocatalytic CO2 Conversion.

Mismatched reaction kinetics of CO2 reduction and H2 O oxidation is the main obstacle limiting the overall photocatalytic CO2 conversion. Here, a molten salt strategy is used to construct tubular triazine-based carbon nitride (TCN) with more adsorption sites and stronger activation capability. Ni(OH)2 nanosheets are then grown over the TCN to trigger a proton-coupled electron transfer for a stoichiometric overall photocatalytic CO2 conversion via "3CO2 + 2H2 O = CH4 + 2CO + 3O2 ." TCN reduces the energy barrier of H2 O dissociation to promote H2 O oxidation to O2 and supply sufficient protons to Ni(OH)2 , whereby the CO2 conversion is accelerated due to the enhanced proton-coupled electron transfer process enabled by the sufficient proton supply from TCN. This work highlights the importance of matching the reaction kinetics of CO2 reduction and H2 O oxidation by proton-coupled electron transfer on stoichiometric overall photocatalytic CO2 conversion.

Bioorthogonal Cycloadditions of C3-Trifluoromethylated 1,2,4-Triazines with trans-Cyclooctenes.

1,2,4-triazines are a valuable class of heterodienes that can be employed in inverse electron-demand Diels-Alder reactions. However, their broader application in bioorthogonal chemistry is limited due to their low reactivity. This article focuses on 3-(trifluoromethyl)-1,2,4-triazines, which can be efficiently prepared in a one-pot reaction from NH-1,2,3-triazoles. These triazines are highly reactive in reactions with strained cyclooctenes, giving second-order rate constants as high as 230 M-1 s-1. Despite their high reactivity, the compounds remain sufficiently stable under biologically relevant conditions. We show that some of the compounds are fluorogenic, a property of potential use in bioimaging. In addition, we demonstrate the successful application of the triazines in labeling model biomolecules. Our work shows that the reactivity of 1,2,4-triazines can be enhanced by the 3-CF3-substitution, which we consider an important step toward the wider use of this promising class of reagents.

Understanding the Poly (Triazine Imide) Crystals Formation Process: The Conversion from Heptazine to Triazine.

Poly (triazine imide) (PTI) generally obtained via ionothermal synthesis features extended π-conjugation and enhanced crystallinity. However, in-depth investigation of the polycondensation process for PTI is an onerous task due to multiple influencing factors and limited characterization techniques. Herein, to simplify the polymerization route and exclude non-essential factors, PTI was prepared by calcining only melamine and LiCl. This study aims to identify the pivotal role of LiCl in PTI formation, which can convert heptazine-based intermediates into more stable triazine-based PTI framework. Based on this discovery, we demonstrate the transformation process of the prepared samples from amorphous Bulk g-C3 N4 to regular PTI, and further prove that the reaction with LiCl causes disruption of heptazine covalent organic frameworks. Additionally, the PTI exhibits higher photocatalytic water splitting performance due to efficient charge carrier mobility and separation, as well as faster reaction kinetics. This discovery deepens understanding of the polycondensation process of PTI crystals and provides insights toward the rational design of crystalline carbon nitride-based semiconductors.

Synthesis and Lewis Acid Properties of Neutral Silver(III) Adducts Containing the AgIII(CF3)3 Moiety.

The acetonitrile AgIII complex [AgIII(CF3)3(NCCH3)] (2) has been reported independently by Eujen and Naumann in the last century, albeit with intriguing NMR discrepancy. In their reports, 2 was claimed to be obtained starting from either [AgIII(CF3)3Cl]- (3⋅Cl) or [AgIII(CF3)4]- (1) via halide abstraction using AgNO3 or acidic treatment, resp. These two synthetic routes are herein reinvestigated. The feasibility of Naumann's method is demonstrated, thus providing 2 yet accompanied by its s-triazinyl derivative [AgIII(CF3)3(C6H9N3)] (2'). The formation of 2' is unprecedented and was thereby investigated. Both 2 and 2' were isolated in pure fashion and fully characterized. In turn, halide extraction from 3⋅Cl leads to the AgIII-ONO2 anion 5 instead of 2, as evidenced by NMR spectroscopy, EA and Sc-XRD.

Tripodal Triazine and 1,8-Naphthalimide-based Small Molecules as Efficient Photocatalysts for Visible-light Oxidative Condensation.

Tripodal donor-acceptor (D-A) small molecules Tr-Np3 and Tr-T-Np3 consisting of triphenyl triazine and 1,8-naphthalimide, without and with a thiophene spacer have been synthesized. Their optical and redox properties were thoroughly investigated along with their utilization as photocatalysts in organic transformations. Compounds Tr-Np3 and Tr-T-Np3 showed broad absorption in the range of 290-480 nm in solutions and 300-510 nm in thin films. These tripodal molecules displayed wide optical bandgaps of (Eg opt ) 3.10 eV and 2.64 eV with very deep-lying HOMO energy levels (-6.60 eV and -6.03 eV) and low-lying LUMO levels (-3.50 eV and -3.40 eV). Appreciable electron mobilities of 5.24×10-4  cm2 /Vs and 6.14×10-4  cm2 /Vs were obtained for compounds Tr-Np3 and Tr-T-Np3 respectively by space-charge limited current (SCLC) measurements. Metal-free tripodal molecules Tr-Np3 and Tr-T-Np3 showed excellent photocatalytic abilities towards condensation of aromatic aldehydes and o-phenylenediamine followed by cyclization under visible light to yield benzimidazole derivatives that are of high medicinal value.

Phenanthrothiophene-Triazine Star-Shaped Discotic Liquid Crystals: Synthesis, Self-Assembly, and Stimuli-Responsive Fluorescence Properties.

Lipophilic biphenylthiophene- and phenanthrothiophene-triazine compounds, BPTTn and CPTTn, respectively, were prepared by a tandem procedure involving successive Suzuki-Miyaura coupling and Scholl cyclodehydrogenation reactions. These compounds display photoluminescence in solution and in thin film state, solvatochromism with increasing solvent's polarity, as well as acidochromism and metal ion recognition stimuli-responsive fluorescence. Protonation of BPTT10 and CPTT10 by trifluoroacetic acid results in fluorescence quenching, which is reversibly restored once treated with triethylamine (ON-OFF switch). DFT computational studies show that intramolecular charge transfer (ICT) phenomena occurs for both molecules, and reveal that protonation enhances the electron-withdrawing ability of the triazine core and reduces the band gap. This acidochromic behavior was applied to a prototype fluorescent anti-counterfeiting device. They also specifically recognize Fe3+ through coordination, and the recognition mechanism is closely related to the photoinduced electron transfer between Fe3+ and BPTT10/CPTT10. CPTTn self-assemble into columnar rectangular (Colrec) mesophase, which can be modulated by oleic acid via the formation of a hydrogen-bonded supramolecular liquid crystal hexagonal Colhex mesophase. Finally, CPTTn also form organic gels in alkanes at low critical gel concentration (3.0 mg/mL). Therefore, these star-shaped triazine molecules possess many interesting features and thus hold great promises for information processing, liquid crystal semiconductors and organogelators.

Synergistic co-catalytic nanozyme system for highly efficient one-pot colorimetric sensing at neutral pH: Combining molybdenum trioxide and Fe(III)-Modified covalent triazine framework.

This study investigates the co-catalytic capabilities of MoO3 nanosheets in enhancing the enzyme-like catalytic activity of a two-dimensional ultrathin Fe(III)-modified covalent triazine framework (Fe-CTF) under neutral pH conditions. The unique physicochemical surface properties and two-dimensional structures of Fe-CTF enable the direct immobilization of native enzymes (glucose oxidase (GOD) and xanthine oxidase (XOD)) through adsorption, eliminating the need for chemical processes. Efficient immobilization of the native enzymes within the Fe-CTF/GOD(XOD) hybrid is achieved through multipoint attachment involving various interactions. The Fe-CTF/MoO3 co-catalytic system exhibits enzyme-mimicking activity at neutral pH and, when combined with the high catalytic activity of the immobilized native enzymes, enables the development of a colorimetric method for glucose detection. This method demonstrates excellent facilitation, rapidity, sensitivity, and selectivity, with a linear detection range of 50-1000 µM and a limit of detection of 8.8 µM for glucose. Furthermore, a straightforward one-pot colorimetric method is established for screening XOD inhibitors. The inhibitory potential of a crude extract derived from Chinese water chestnut peel on XOD activity is evaluated using this method. The findings of this study pave the way for the utilization of nanozyme/native enzyme hybrids in pH-neutral conditions for one-pot colorimetric sensing. This work contributes to the advancement of enzyme-based sensing technologies and holds promise for various applications in biosensing and biomedical research.

Selection of collagen IV fragments forming the outer sphere of the native protein: Assessment of biological activity for regenerative medicine.

The aim of this research was to select the fragments that make up the outer layer of the collagen IV (COL4A6) protein and to assess their potential usefulness for regenerative medicine. It was expected that because protein-protein interactions take place via contact between external domains, the set of peptides forming the outer sphere of collagen IV will determine its interaction with other proteins. Cellulose-immobilized protein fragment libraries treated with polyclonal anti-collagen IV antibodies were used to select the peptides forming the outer sphere of collagen IV. In the first test, 33 peptides that strongly interacted with the polyclonal anti-collagen IV antibodies were selected from a library of non-overlapping fragments of collagen IV. The selected fragments of collagen IV (cleaved from the cellulose matrix) were tested for their cytotoxicity, their effects on cell viability and proliferation, and their impact on the formation of reactive oxygen species (ROS). The studies used RAW 264.7 mouse macrophage cells and Hs 680.Tr human fibroblasts. PrestoBlue, ToxiLight™, and ToxiLight 100% Lysis Control assays were conducted. The viability of fibroblasts cultured with the addition of increasing concentrations of the peptide mix did not show statistically significant differences from the control. Fragments 161-170, 221-230, 721-730, 1331-1340, 1521-1530, and 1661-1670 of COL4A6 were examined for cytotoxicity against BJ normal human foreskin fibroblasts. None of the collagen fragments were found to be cytotoxic. Further research is underway on the potential uses of collagen IV fragments in regenerative medicine.

Synthetic and pharmacological developments in the hybrid s-triazine moiety: A review.

This article summarizes the most recent advancements in the synthetic and pharmacological approaches along with the structure activity relationship towards the s-triazine and its derivatives. Much attention has been given to s-triazine core due to its facile synthesis, interesting pharmacology, high reactivity, and binding characteristics towards various enzymes. An array of biological applications has been demonstrated by s-triazines including antimalarial, anti-HIV, anti-viral, antimicrobial, anti-tuberculosis to name a few. In the present investigation s-triazine based molecular structures have been assembled in respect to their synthesis and medicinal properties. Further, the competence of s-triazine has been correlated and compared with the other heterocyclic moieties to substantiates-triazine a privileged scaffold. From the literature it is revealed that nucleophilic substitution at 2, 4, and 6 positions is significant for various biological applications. This article would help in assisting the chemists in designing novel molecular entities with high medicinal value.

Chemosensitization of non-small cell lung cancer to sorafenib via non-hydroxamate s-triazinedione-based MMP-9/10 inhibitors.

Non-small cell lung cancer (NSCLC) continues to be a leading cause of cancer death. Its fatality is associated with angiogenesis and metastasis. While VEGFR inhibitors are expected to be the central pillar for halting lung cancer, several clinical reports declared their subpar activities as monotherapy. These results directed combination studies of VEGFR inhibitors, especially sorafenib (Nexavar®), with various chemotherapeutic agents. Matrix metalloproteinase (MMP) inhibitors are seldom utilized in such combinations despite the expected complementary therapeutic outcome. This could be attributed to the clinical unsuitability of MMP inhibitors from the hydroxamate family. Herein, we report new non-hydroxamate s-triazinedione-based inhibitors of MMP-9 (6b; IC50 = 0.112 µM), and MMP-10 (6e; IC50 = 0.076 µM) surpassing the hydroxamate inhibitor NNGH for chemosensitization of NSCLC to sorafenib. MMPs inhibition profiling of the hits revealed MMP-9 over -2 and MMP-10 over -13 selectivity. 6b and 6e were potent (IC50 = 0.139 and 0.136 µM), safe (SI up to 6.77) and superior to sorafenib (IC50 = 0.506 µM, SI = 6.27) against A549 cells. When combined with sorafenib, the studied MMP inhibitors enhanced its cytotoxic efficacy up to 26 folds as confirmed by CI and DRI values for 6b (CI = 0.160 and DRI = 22.175) and 6e (CI = 0.096 and DRI = 29.060). 6b and 6e exerted anti-invasive activities in A549 cells as single agents (22.66 and 39.67 %) and in sorafenib combinations (29.96 and 91.83 %) compared to untreated control. Both compounds downregulated VEGF in A549 cells by approximately 70 % when combined with sorafenib, highlighting enhanced anti-angiogenic activities. Collectively, combinations of 6b and 6e with sorafenib demonstrated synergistic NSCLC cytotoxicity with pronounced anti-invasive and anti-angiogenic activities introducing a promising start point for preclinical studies.

Rationale design of novel substituted 1,3,5-triazine candidates as dual IDH1(R132H)/ IDH2(R140Q) inhibitors with high selectivity against acute myeloid leukemia: In vitro and in vivo preclinical investigations.

In this study, novel substituted 1,3,5-triazine candidates (4a-d, 5a-j, and 6a-d) were designed as second-generation small molecules to act as dual IDH1 and IDH2 inhibitors according to the pharmacophoric features of both vorasidenib and enasidenib. Compounds 6a and 6b for leukemia cell lines showed from low to sub-micromolar GI50. Moreover, compounds 4c, 5f, and 6b described the frontier antitumor activity against THP1 and Kasumi Leukemia cancer cells with IC50 values of (10 and 12), (10.5 and 7), and (6.2 and 5.9) µg/mL, which were superior to those of cisplatin (25 and 28) µg/mL, respectively. Interestingly, compounds 4c, 6b, and 6d represented the best dual IDH1(R132H)/IDH2(R140Q) inhibitory potentials with IC50 values of (0.72 and 1.22), (0.12 and 0.93), and (0.50 and 1.28) µg/mL, respectively, compared to vorasidenib (0.02 and 0.08) µg/mL and enasidenib (0.33 and 1.80) µg/mL. Furthermore, the most active candidate (6b) has very promising inhibitory potentials towards HIF-1α, VEGF, and SDH, besides, a marked increase of ROS was observed as well. Besides, compound 6b induced the upregulation of P53, BAX, Caspases 3, 6, 8, and 9 proteins by 3.70, 1.99, 2.06, 1.73, 1.75, and 1.85-fold changes, respectively, and the downregulation for the BCL-2 protein by 0.55-fold change compared to the control. Besides, the in vivo behavior of compound 6b as an antitumor agent was evaluated in female mice bearing solid Ehrlich carcinoma tumors. Notably, compound 6b administration resulted in a prominent decrease in the weight and volume of the tumors, accompanied by improvements in biochemical, hematological, and histological parameters.

Porous poly(bismaleimide-co-divinylbenzene) microspheres as dispersive solid-phase extraction adsorbent coupled to high-performance liquid chromatography for the determination of triazine herbicide residues in vegetable samples.

In this work, monodisperse and nano-porous poly(bismaleimide-co-divinylbenzene) microspheres with large specific surface area (427.6 m2 /g) and rich pore structure were prepared by one-pot self-stable precipitation polymerization of 2,2'-bis[4-(4-maleimidophenoxy) phenyl] propane and divinylbenzene. The prepared poly(bismaleimide-co-divinylbenzene) microspheres were employed as dispersive solid-phase extraction (DSPE) adsorbent for the extraction of triazine herbicides. Under optimized conditions, good linearities were obtained between the peak area and the concentration of triazine herbicides in the range of 1-400 µg/L (R2 ≥ 0.9987) with the limits of detection of 0.12-0.31 µg/L. Triazine herbicides were detected using the described approach in vegetable samples (i.e., cucumber, tomato, and maize) with recoveries of 93.6%-117.3% and relative standard deviations of 0.4%-3.5%. In addition, the recoveries of triazine herbicides remained above 80.7% after being used for nine DSPE cycles, showing excellent reusability of poly(bismaleimide-co-divinylbenzene) microspheres. The adsorption of poly(bismaleimide-co-divinylbenzene) microspheres toward triazine herbicides was a monolayer and chemical adsorption. The adsorption mechanism between triazine herbicides and adsorbents might be a combination of hydrogen bonding, electrostatic interaction, and π-π conjugation. The results confirmed the potential use of the poly(bismaleimide-co-divinylbenzene) microspheres-based DSPE coupled to the high-performance liquid chromatography method for the detection of triazine herbicide residues in vegetable samples.