Activated Carbon Fiber Cloth/Biomimetic Apatite: A Dual Drug Delivery System.

A biomaterial that is both bioactive and capable of controlled drug release is highly attractive for bone regeneration. In previous works, we demonstrated the possibility of combining activated carbon fiber cloth (ACC) and biomimetic apatite (such as calcium-deficient hydroxyapatite (CDA)) to develop an efficient material for bone regeneration. The aim to use the adsorption properties of an activated carbon/biomimetic apatite composite to synthetize a biomaterial to be used as a controlled drug release system after implantation. The adsorption and desorption of tetracycline and aspirin were first investigated in the ACC and CDA components and then on ACC/CDA composite. The results showed that drug adsorption and release are dependent on the adsorbent material and the drug polarity/hydrophilicity, leading to two distinct modes of drug adsorption and release. Consequently, a double adsorption approach was successfully performed, leading to a multifunctional and innovative ACC-aspirin/CDA-tetracycline implantable biomaterial. In a second step, in vitro tests emphasized a better affinity of the drug (tetracycline or aspirin)-loaded ACC/CDA materials towards human primary osteoblast viability and proliferation. Then, in vivo experiments on a large cortical bone defect in rats was carried out to test biocompatibility and bone regeneration ability. Data clearly highlighted a significant acceleration of bone reconstruction in the presence of the ACC/CDA patch. The ability of the aspirin-loaded ACC/CDA material to release the drug in situ for improving bone healing was also underlined, as a proof of concept. This work highlights the possibility of bone patches with controlled (multi)drug release features being used for bone tissue repair.

Long-Term Fate and Efficacy of a Biomimetic (Sr)-Apatite-Coated Carbon Patch Used for Bone Reconstruction.

Critical bone defect repair remains a major medical challenge. Developing biocompatible materials with bone-healing ability is a key field of research, and calcium-deficient apatites (CDA) are appealing bioactive candidates. We previously described a method to cover activated carbon cloths (ACC) with CDA or strontium-doped CDA coatings to generate bone patches. Our previous study in rats revealed that apposition of ACC or ACC/CDA patches on cortical bone defects accelerated bone repair in the short term. This study aimed to analyze in the medium term the reconstruction of cortical bone in the presence of ACC/CDA or ACC/10Sr-CDA patches corresponding to 6 at.% of strontium substitution. It also aimed to examine the behavior of these cloths in the medium and long term, in situ and at distance. Our results at day 26 confirm the particular efficacy of strontium-doped patches on bone reconstruction, leading to new thick bone with high bone quality as quantified by Raman microspectroscopy. At 6 months the biocompatibility and complete osteointegration of these carbon cloths and the absence of micrometric carbon debris, either out of the implantation site or within peripheral organs, was confirmed. These results demonstrate that these composite carbon patches are promising biomaterials to accelerate bone reconstruction.

In vivo effectiveness of carbonated calcium-deficient hydroxyapatite-coated activated carbon fiber cloth on bone regeneration.

We have previously shown that activated carbon fiber cloth (ACC) either uncoated or coated with carbonated calcium-deficient hydroxyapatite (CDA), namely ACC and ACC/CDA, were biocompatible in vitro with human osteoblasts. Here we hypothesized that ACC and ACC/CDA could be used as tissue patches in vivo to accelerate wounded bone healing. In a model of rat femoral defect, we have compared spontaneous cortical bone regeneration with regeneration in the presence of ACC and ACC/CDA patches. At Day 7, 14, and 21, bone formation was evaluated using microcomputed tomography, magnetic resonance imaging, and histological analysis. Our results demonstrate first that these ACC tissues are highly biocompatible in vivo, and second that ACC/CDA patches apposition results in the acceleration of bone reconstruction due to a guiding action of the ACC fibers and an osteogenic effect of the CDA phase. We guess that this approach may represent a valuable strategy to accelerate bone regeneration in human.

Mercury vapor adsorption and sustainable recovery using novel electrothermal swing system with gold-electrodeposited activated carbon fiber cloth.

A novel electrothermal swing (ETS) system with gold-electrodeposited activated carbon fiber cloth (GE-ACFC) was developed to adsorb and sustainably recover low-concentration Hg0. GE-ACFC with an Au growth time of 1200 s displayed the largest Hg0 adsorption capacity and >90% removal efficiency. The Hg0 adsorption of GE-ACFC was dominated by physisorption via Au amalgamation. In contrast, Hg adsorption of untreated ACFC (RAW-ACFC) was mainly controlled by physisorption and chemisorption related to carbonyl groups. Nevertheless, both ACFCs could reach 100% ETS Hg0 regeneration. The Hg re-adsorption of GE-ACFC was stable, with efficiency >90% at different regeneration temperatures in three-cycle ETS experiments, but the Hg re-adsorption efficiencies of RAW-ACFC greatly decreased to only 60% after 250 â„ƒ regeneration, due to the formation of electrothermal hot spots in the ACFC. Because the thermal and electrical conductivity of GE-ACFC increased due to Au electrodeposition, the presence of electrothermal hot spots in GE-ACFC-1200s was minor. Simulation results showed that both pseudo-first-order and pseudo-second-order models fitted well to the desorption patterns of the GE-ACFC. Mass transfer model further suggested that intraparticle diffusion control was the rate-limiting step, with diffusion coefficients increased from the first to the third cycle for GE-ACFC.

Strontium incorporation into biomimetic carbonated calcium-deficient hydroxyapatite coated carbon cloth: Biocompatibility with human primary osteoblasts.

It has already been shown that sono-electrodeposition can be used to coat activated carbon fiber cloth (ACC) with calcium phosphates (CaP) and we recently demonstrated that cathodic polarization at -1 V/Hg/Hg2SO4 was the best parameter to obtain a carbonated calcium deficient hydroxyapatite (CDA) coating with optimal uniformity and homogeneity. In the present study, we investigated whether this technique was suitable to dope this carbonated CDA coating by partial substitution with another bivalent cation such as strontium. We show here that a strontium-substituted carbonated CDA coating can be produced and quantitatively controlled up to at least 10 at.%. In this range we demonstrate that the presence of strontium does not modify either the textural or the structural properties of the carbonated CDA. Owing to the well-known effect of both carbonated CDA and strontium in bone formation, the biocompatibility of ACC coated or not with carbonated CDA or with strontium substituted carbonated CDA was tested using primary human osteoblasts. Our data revealed a positive and dose-dependent effect of strontium addition on osteoblast activity and proliferation. In conclusion, we show here that electrodeposition at -1 V is a suitable and easy process to incorporate cations of biological interest into CaP coating.

Polymorphous Supercapacitors Constructed from Flexible Three-Dimensional Carbon Network/Polyaniline/MnO2 Composite Textiles.

Polymorphous supercapacitors were constructed from flexible three-dimensional carbon network/polyaniline (PANI)/MnO2 composite textile electrodes. The flexible textile electrodes were fabricated through a layer-by-layer construction strategy: PANI, carbon nanotubes (CNTs), and MnO2 were deposited on activated carbon fiber cloth (ACFC) in turn through an electropolymerization process, "dipping and drying" method, and in situ chemical reaction, respectively. In the fabricated ACFC/PANI/CNTs/MnO2 textile electrodes, the ACFC/CNT hybrid framework serves as a porous and electrically conductive 3D network for the rapid transmission of electrons and electrolyte ions, where ACFC, PANI, and MnO2 are high-performance supercapacitor electrode materials. In the electrolyte of H2SO4 solution, the textile electrode-based symmetric supercapacitor delivers superior areal capacitance, energy density, and power density of 4615 mF cm-2 (for single electrode), 157 µW h cm-2, and 10372 µW cm-2, respectively, whereas asymmetric supercapacitor assembled with the prepared composite textile as the positive electrode and ACFC as the negative electrode exhibits an improved energy density of 413 µW h cm-2 and a power density of 16120 µW cm-2. On the basis of the ACFC/PANI/CNTs/MnO2 textile electrodes, symmetric and asymmetric solid-state textile supercapacitors with a PVA/H2SO4 gel electrolyte were also produced. These solid-state textile supercapacitors exhibit good electrochemical performance and high flexibility. Furthermore, flexible solid-state fiber-like supercapacitors were prepared with fiber bundle electrodes dismantled from the above composite textiles. Overall, this work makes a meaningful exploration of the versatile applications of textile electrodes to produce polymorphous supercapacitors.

Electrothermal adsorption and desorption of volatile organic compounds on activated carbon fiber cloth.

Adsorption is an effective means to selectively remove volatile organic compounds (VOCs) from industrial gas streams and is particularly of use for gas streams that exhibit highly variable daily concentrations of VOCs. Adsorption of such gas streams by activated carbon fiber cloths (ACFCs) and subsequent controlled desorption can provide gas streams of well-defined concentration that can then be more efficiently treated by biofiltration than streams exhibiting large variability in concentration. In this study, we passed VOC-containing gas through an ACFC vessel for adsorption and then desorption in a concentration-controlled manner via electrothermal heating. Set-point concentrations (40-900 ppm(v)) and superficial gas velocity (6.3-9.9 m/s) were controlled by a data acquisition and control system. The results of the average VOC desorption, desorption factor and VOC in-and-out ratio were calculated and compared for various gas set-point concentrations and superficial gas velocities. Our results reveal that desorption is strongly dependent on the set-point concentration and that the VOC desorption rate can be successfully equalized and controlled via an electrothermal adsorption system.