Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts.

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Carbon-based nanozymes: design, catalytic mechanisms, and environmental applications.

Carbon-based nanozymes are synthetic nanomaterials that are predominantly constituted of carbon-based materials, which mimic the catalytic properties of natural enzymes, boasting features such as tunable catalytic activity, robust regenerative capacity, and exceptional stability. Due to the impressive enzymatic performance similar to various enzymes such as peroxidase, superoxide dismutase, and oxidase, they are widely used for detecting and degrading pollutants in the environment. This paper presents an exhaustive review of the fundamental design principles, catalytic mechanisms, and prospective applications of carbon-based nanozymes in the environmental field. These studies not only serve to augment the comprehension on the intricate operational mechanism inherent in these synthetic nanostructures, but also provide essential guidelines and illuminating perspectives for advancing their development and practical applications. Future studies that are imperative to delve into the untapped potential of carbon-based nanozymes within the environmental domain was needed to be explored to fully harness their ability to deliver broader and more impactful environmental preservation and management outcomes.

Advancing nanobubble technology for carbon-neutral water treatment and enhanced environmental sustainability.

Gaseous nanobubbles (NBs) with dimensions ranging from 1 to 1000 nm in the liquid phase have garnered significant interest due to their unique physicochemical characteristics, including specific surface area, low internal gas pressure, long-term stability, efficient mass transfer, interface potential, and free radical production. These remarkable properties have sparked considerable attention in the scientific community and industries alike. These hold immense promise for environmental applications, especially for carbon-neutral water remediation. Their long-lasting stability in aqueous systems and efficient mass transfer properties make them highly suitable for delivering gases in the vicinity of pollutants. This potential has prompted research into the use of NBs for targeted delivery of gases in contaminated water bodies, facilitating the degradation of harmful substances and advancing sustainable remediation practices. However, despite significant progress in understanding NBs physicochemical properties and potential applications, several challenges and knowledge gaps persist. This review thereby aims to summarize the current state of research on NBs environmental applications and potential for remediation. By discussing the generation processes, mechanisms, principles, and characterization techniques, it sheds light on the promising future of NBs in advancing environmental sustainability. It explores their role in improving oxygenation, aeration, and pollutant degradation in water systems. Finally, the review addresses future research perspectives, emphasizing the need to bridge knowledge gaps and overcome challenges to unlock the full potential of this frontier technology for enhanced environmental sustainability.

Exploring the Biological Pathways of Siderophores and Their Multidisciplinary Applications: A Comprehensive Review.

Siderophores are a class of small molecules renowned for their high iron binding capacity, essential for all life forms requiring iron. This article provides a detailed review of the diverse classifications, and biosynthetic pathways of siderophores, with a particular emphasis on siderophores synthesized via nonribosomal peptide synthetase (NRPS) and non-NRPS pathways. We further explore the secretion mechanisms of siderophores in microbes and plants, and their role in regulating bioavailable iron levels. Beyond biological functions, the applications of siderophores in medicine, agriculture, and environmental sciences are extensively discussed. These applications include biological pest control, disease treatment, ecological pollution remediation, and heavy metal ion removal. Through a comprehensive analysis of the chemical properties and biological activities of siderophores, this paper demonstrates their wide prospects in scientific research and practical applications, while also highlighting current research gaps and potential future directions.

Low Concentration of Peroxymonosulfate Triggers Dissolved Oxygen Conversion over Single Atomic Fe-N3 O1 Sites for Water Decontamination.

Achieving satisfactory organic pollutant oxidation with a low concentration of peroxymonosulfate (PMS) is vital for persulfate-involved advanced oxidation processes to reduce resource consumption and avoid excessive sulfate anion (SO4 2- ) production. Herein, efficient conversion of dissolved oxygen (DO) over single-atomic Fe-N3 O1 sites anchored on carbon nitride for efficient contaminant degradation is fulfilled, triggered by a low concentration of PMS (0.2 mm). Experimental and theoretical results reveal that the preferentially adsorbed PMS onto atomic Fe-N3 O1 center can deliver electrons toward the single Fe atom to increase its electron density to trigger DO reduction into superoxide radical (O2 • - ) and successive transformation into singlet oxygen (1 O2 ), which is quite different from the conventional PMS activation process mostly depending on PMS itself function for reactive oxygen species generation. On the other hand, PMS with high concentration could occupy active Fe-N3 O1 sites to hamper DO conversion and further produce massive SO4 2- . A couple of -Fe-CN0.05 -and slight PMS is effective for actual kitchen wastewater remediation and long-term bisphenol A degradation. This work elucidates the triggering role of low-concentration PMS in DO conversion over a single-atom Fe catalyst, which can inspire the development of resource-saving, cost-effective, and environmentally-friendly catalytic oxidation systems for environmental restoration.

Cyano-Regulated Organic Polymers for Highly Efficient Photocatalytic H2 O2 Production in Various Actual Water Bodies.

Photocatalytic production of H2 O2 has drawn significant attention in recent years, but the yield rate of current photocatalytic systems is still unsatisfactory. Moreover, the presence of various components in actual water bodies will consume the photogenerated charges and deactivate the catalyst, severely limiting the real applications of photocatalytic H2 O2 production. Herein, a cyano-modified polymer photocatalyst is synthesized by Knoevenagel condensation with subsequent thermal polymerization. The introduction of cyano group and sulfer (S), oxygen (O) elements modulates the microstructure and energy band of the polymer catalyst, and the cyano group sites can effectively adsorb and activate O2 , realizing the generation of H2 O2 in the two-step single-electron oxygen reduction process. The reported system achieves high H2 O2 generation rate up to 1119.2 µmol g-1 h-1 in various water bodies including tap water, river water, seawater, and secondary effluent. This simple and readily available catalyst demonstrates good anti-interference performance and pH adaptability in photocatalytic H2 O2 production in actual water bodies, and its photodegradation and sterilization applications are also demonstrated. This study offers new insights in developing polymer catalysts for efficient photocatalytic production of H2 O2 in various water bodies for practical application.

Efficient and precise control of gene expression in Geobacter sulfurreducens through new genetic elements and tools for pollutant conversion.

Geobacter species, exhibiting exceptional extracellular electron transfer aptitude, hold great potential for applications in pollution remediation, bioenergy production, and natural elemental cycles. Nonetheless, a scarcity of well-characterized genetic elements and gene expression tools constrains the effective and precise fine-tuning of gene expression in Geobacter species, thereby limiting their applications. Here, we examined a suite of genetic elements and developed a new genetic editing tool in Geobacter sulfurreducens to enhance their pollutant conversion capacity. First, the performances of the widely used inducible promoters, constitutive promoters, and ribosomal binding sites (RBSs) elements in G. sulfurreducens were quantitatively evaluated. Also, six native promoters with superior expression levels than constitutive promoters were identified on the genome of G. sulfurreducens. Employing the characterized genetic elements, the clustered regularly interspaced short palindromic repeats interference (CRISPRi) system was constructed in G. sulfurreducens to achieve the repression of an essential gene-aroK and morphogenic genes-ftsZ and mreB. Finally, applying the engineered strain to the reduction of tungsten trioxide (WO3 ), methyl orange (MO), and Cr(VI), We found that morphological elongation through ftsZ repression amplified the extracellular electron transfer proficiency of G. sulfurreducens and facilitated its contaminant transformation efficiency. These new systems provide rapid, versatile, and scalable tools poised to expedite advancements in Geobacter genomic engineering to favor environmental and other biotechnological applications.

Biomass-Derived Carbonaceous Materials with Graphene/Graphene-Like Structures: Definition, Classification, and Environmental Applications.

Biomass-derived carbonaceous materials with graphene/graphene-like structures (BGS) have attracted tremendous attention in the field of environmental remediation. The introduction of graphene/graphene-like structures into raw biochars can effectively improve their properties, such as electrical conductivity, surface functional groups, and catalytic activity. In 2021, the International Organization for Standardization defined graphene as a "single layer of carbon atoms with each atom bound to three neighbours in a honeycomb structure". Considering this definition, several studies have incorrectly referred to BGS (e.g., biomass-derived few-layer graphene or porous graphene-like nanosheets) as "graphene". The definitions and classifications of BGS and their applications in environmental remediation have not been assessed critically thus far. Comprehensive analysis and sufficient and robust evidence are highly desired to accurately determine the specific structures of BGS. In this perspective, we provide a systematic framework to define and classify the BGS. The state-of-the-art methods currently used to determine the structural properties of BGS are scrutinized. We then discuss the design and fabrication of BGS and how their distinctive features could improve the applicability of biomass-derived carbonaceous materials, particularly in environmental remediation. The environmental applications of these BGS are highlighted, and future research opportunities and needs are identified. The fundamental insights in this perspective provide critical guidance for the further development of BGS for a wide range of environmental applications.

A review on extraction of polysaccharides from crustacean wastes and their environmental applications.

Disposal of biodegradable waste of seashells leads to an environmental imbalance. A tremendous amount of wastes produced from flourishing shell fish industries while preparing crustaceans for human consumption can be directed towards proper utilization. The review of the present study focuses on these polysaccharides from crustaceans and a few important industrial applications. This review aimed to emphasize the current research on structural analyses and extraction of polysaccharides. The article summarises the properties of chitin, chitosan, and chitooligosaccharides and their derivatives that make them non-toxic, biodegradable, and biocompatible. Different extraction methods of chitin, chitosan, and chitooligosaccharides have been discussed in detail. Additionally, this information outlines possible uses for derivatives of chitin, chitosan, and chitooligosaccharides in the environmental, pharmaceutical, agricultural, and food industries. Additionally, it is essential to the textile, cosmetic, and enzyme-immobilization industries. This review focuses on new, insightful suggestions for raising the value of crustacean shell waste by repurposing a highly valuable material.

Development and Evaluation of a Cellular Vehicle-to-Everything Enabled Energy-Efficient Dynamic Routing Application.

Cellular vehicle-to-everything (C-V2X) is a communication technology that supports various safety, mobility, and environmental applications, given its higher reliability properties compared to other communication technologies. The performance of these C-V2X-enabled intelligent transportation system (ITS) applications is affected by the performance of the C-V2X communication technology (mainly packet loss). Similarly, the performance of the C-V2X communication is dependent on the vehicular traffic density which is affected by the traffic mobility patterns and vehicle routing strategies. Consequently, it is critical to develop a tool that can simulate, analyze, and evaluate the mutual interactions of the transportation and communication systems at the application level to quantify the benefits of C-V2X-enabled ITS applications realistically. In this paper, we demonstrate the benefits gained when using C-V2X Vehicle-to-Infrastructure (V2I) communication technology in an energy-efficient dynamic routing application. Specifically, we develop a Connected Energy-Efficient Dynamic Routing (C-EEDR) application using C-V2X as a communication medium in an integrated vehicular traffic and communication simulator (INTEGRATION). The results demonstrate that the C-EEDR application achieves fuel savings of up to 16.6% and 14.7% in the IDEAL and C-V2X communication cases, respectively, for a peak hour demand on the downtown Los Angeles network considering a 50% level of market penetration of connected vehicles. The results demonstrate that the fuel savings increase with increasing levels of market penetration at lower traffic demand levels (25% and 50% the peak demand). At higher traffic demand levels (75% and 100%), the fuel savings increase with increasing levels of market penetration with maximum benefits at a 50% market penetration rate. Although the communication system is affected by the high density of vehicles at the high traffic demand levels (75% and 100% the peak demand), the C-EEDR application manages to perform reliably, producing system-wide fuel consumption savings.The C-EEDR application achieves fuel savings of 15.2% and 11.7% for the IDEAL communication and 14% and 9% for the C-V2X communication at the 75% and 100% market penetration rates, respectively. Finally, the paper demonstrates that the C-V2X communication constraints only affect the performance of the C-EEDR application at the full demand level when the market penetration of the connected vehicles exceeds 25%. This degradation, however, is minimal (less than a 2.5% reduction in fuel savings).

A Review of Synthesis and Applications of Al2O3 for Organic Dye Degradation/Adsorption.

This comprehensive review investigates the potential of aluminum oxide (Al2O3) as a highly effective adsorbent for organic dye degradation. Al2O3 emerges as a promising solution to address environmental challenges associated with dye discharge due to its solid ceramic composition, robust mechanical properties, expansive surface area, and exceptional resistance to environmental degradation. The paper meticulously examines recent advancements in Al2O3-based materials, emphasizing their efficacy in both organic dye degradation and adsorption. Offering a nuanced understanding of Al2O3's pivotal role in environmental remediation, this review provides a valuable synthesis of the latest research developments in the field of dye degradation. It serves as an insightful resource, emphasizing the significant potential of aluminum oxide in mitigating the pressing environmental concerns linked to organic dye discharge. The application of Al2O3-based catalysts in the photocatalytic treatment of multi-component organic dyes necessitates further exploration, particularly in addressing real-world wastewater complexities.

Green synthesis of carbon quantum dots and their environmental applications.

Green synthesis of scalable, high-quality, fluorescent carbon quantum dots (CQDs) from natural biomass remains attractive due to their outstanding environmental application. CQDs are an emerging class of zero-dimensional carbon nanomaterials (<10 nm) that have recently attracted much attention due to their strong optical properties, biocompatibility, nontoxicity, uniform particle size, high photostability, low-cost synthesis, and highly tunable photoluminescence. The unique properties of CQDs possess a broad range of prospective applications in a number of fields such as metal ions detection, photocatalysis, sensing, medical diagnosis, bioimaging, and drug delivery. CQD nanostructures are synthesized using various techniques such as hydrothermal method, laser ablation, microwave irradiation, electrochemical oxidation, reflux method, and ultrasonication. However, this type of fabrication approach requires several chemical reactions including oxidation, carbonization, and pyrolysis. Green synthesis of CQDs has several advantages such as the use of low-cost and non-toxic raw materials, renewable resources, simple operations, and being environment-friendly. This review article will discuss the physicochemical properties of CQDs techniques used in the production of CQDs, and the stability of CQDs along with their applications in wastewater treatment and biomedical fields.

Poly(Lactic Acid)-Based Graft Copolymers: Syntheses Strategies and Improvement of Properties for Biomedical and Environmentally Friendly Applications: A Review.

As a potential replacement for petroleum-based plastics, biodegradable bio-based polymers such as poly(lactic acid) (PLA) have received much attention in recent years. PLA is a biodegradable polymer with major applications in packaging and medicine. Unfortunately, PLA is less flexible and has less impact resistance than petroleum-based plastics. To improve the mechanical properties of PLA, PLA-based blends are very often used, but the outcome does not meet expectations because of the non-compatibility of the polymer blends. From a chemical point of view, the use of graft copolymers as a compatibilizer with a PLA backbone bearing side chains is an interesting option for improving the compatibility of these blends, which remains challenging. This review article reports on the various graft copolymers based on a PLA backbone and their syntheses following two chemical strategies: the synthesis and polymerization of modified lactide or direct chemical post-polymerization modification of PLA. The main applications of these PLA graft copolymers in the environmental and biomedical fields are presented.

Magnetic nanostructures functionalized with a derived lysine coating applied to simultaneously remove heavy metal pollutants from environmental systems.

The pollution of environmental systems with heavy metals is becoming a serious problem worldwide. These contaminants are one of the main issues in sludge (which is considered waste) and can even have harmful effects if the sludge is not treated properly. Thus, the development of a novel functional magnetic nanoadsorbent based on a derived lysine is reported here, which can be efficiently applied for metal removal from sludge. Magnetic nanoparticles were coated with silica layer and further modified by covalent bonding of derived lysine. The morphology of the nanomaterial, its nano-size and the silica layer thickness were analyzed by transmission electron microscopy. The successful silanization of the lysine derivative to the silica-coated magnetic nanostructures was investigated by several physicochemical characterization techniques, while the magnetic properties were measured with a vibrating sample magnetometer. The synthesized nanostructures were used as adsorbents for simultaneous removal of most critical heavy metals (Cr, Zn, Cu) from real complex sludge suspensions. The main practical adsorption parameters, pH of the native stabilized sludge, adsorbent amount, time, and adsorbent regeneration were investigated. The results show promising adsorption properties among currently available adsorbents (the total equilibrium adsorption capacity was 24.5 mg/g) from the sludge with satisfactory nanoadsorbent reusability and its rapid removal. The stability of the nanoadsorbent in the sludge, an important but often neglected practical parameter for efficient removal, was verified. This work opens up new possibilities for the development of high-quality magnetic nanoadsorbents for metal pollutants applied in various complicated environmental fields and enables waste recovery.

A novel sensor based on WO3·0.33H2O nanorods modified electrode for the detection and degradation of herbicide, carbendazim.

In the present-day scenario, it is necessary to establish more flexible, effective and selective analytical methods that are easy to operate and less expensive. Cyclic voltammetry (CV) can be a useful technique to assess minute quantity of pollutants and in this work, an effort has been made to detect the trace quantification from the environmental samples. Herein, electrochemical sensor was fabricated using tungsten oxide nanorod (WO3·0.33H2O) for sensitive detection of fungicide, carbendazim (CBZ). Under optimal conditions, while studying the effect of pH on peak current, the highest peak current was observed at pH 4.2. The degradation of CBZ followed the mixed diffusion-adsorption controlled and quasi-reversible processess at the WO3·0.33H2O/GC electrode surface. Using WO3·0.33H2O/GCE sensor in SWV provided the lowest limit of detection (LOD) and limit of quantification (LOQ) values of 2.21 × 10-8 M and 7.37 × 10-8 M, respectively over the concentration ranges of 1.0 × 10-7 M to 2.5 × 10-4 M. The proposed method demonstrates potential applicability of the fabricated sensor for soil and water samples analysis in the management of creating a benign environment.

Thalassobacillus, a genus of extreme to moderate environmental halophiles with biotechnological potential.

Thalassobacillus is a moderately halophilic genus that has been isolated from several sites worldwide, such as hypersaline lakes, saline soils, salt flats, and volcanic mud. Halophilic bacteria have provided functional stable biomolecules in harsh conditions for industrial purposes. Despite its potential biotechnological applications, Thalassobacillus has not been fully characterized yet. This review describes the Thalassobacillus genus, with the few species reported, pointing out its possible applications in enzymes (amylases, cellulases, xylanases, and others), biosurfactants, bioactive compounds, biofuels production, bioremediation, and plant growth promotion. The Thalassobacillus genus represents a little-explored biological resource but with a high potential.

Exfoliation of 2D Materials for Energy and Environmental Applications.

The fascinating properties of single-layer graphene isolated by mechanical exfoliation have inspired extensive research efforts toward two-dimensional (2D) materials. Layered compounds serve as precursors for atomically thin 2D materials (briefly, 2D nanomaterials) owing to their strong intraplane chemical bonding but weak interplane van der Waals interactions. There are newly emerging 2D materials beyond graphene, and it is becoming increasingly important to develop cost-effective, scalable methods for producing 2D nanomaterials with controlled microstructures and properties. The variety of developed synthetic techniques can be categorized into two classes: bottom-up and top-down approaches. Of top-down approaches, the exfoliation of bulk 2D materials into single or few layers is the most common. This review highlights chemical and physical exfoliation methods that allow for the production of 2D nanomaterials in large quantities. In addition, remarkable examples of utilizing exfoliated 2D nanomaterials in energy and environmental applications are introduced.

Structural design and environmental applications of electrospun nanofibers.

Nanofibers have attracted extensive attention and been applied in various fields due to their high aspect ratio, high specific surface area, flexibility, structural abundance, etc. The electrospinning method is one of the most promising and effective ways to produce nanofibers. The electrospun nanofibers-based films and membranes have already been demonstrated to possess small pore sizes, larges specific surface area, and can be grafted with different functionalities to adapt to various purposes. The environmental applications of nanofibers are one of the essential application fields, and great achievements have been made in this field. To well summarize the development of nanofibers and their environmental applications, we review the nanofiber fabrication methods, advanced fiber structures, and their applications in the field of air filtration, heavy metal removal, and self-cleaning surface. We hope this review and summary can provide readers a comprehensive understanding of the structural design and environmental applications of electrospun nanofibers.

A Survey of Marker-Less Tracking and Registration Techniques for Health & Environmental Applications to Augmented Reality and Ubiquitous Geospatial Information Systems.

Most existing augmented reality (AR) applications are suitable for cases in which only a small number of real world entities are involved, such as superimposing a character on a single surface. In this case, we only need to calculate pose of the camera relative to that surface. However, when an AR health or environmental application involves a one-to-one relationship between an entity in the real-world and the corresponding object in the computer model (geo-referenced object), we need to estimate the pose of the camera in reference to a common coordinate system for better geo-referenced object registration in the real-world. New innovations in developing cheap sensors, computer vision techniques, machine learning, and computing power have helped to develop applications with more precise matching between a real world and a virtual content. AR Tracking techniques can be divided into two subcategories: marker-based and marker-less approaches. This paper provides a comprehensive overview of marker-less registration and tracking techniques and reviews their most important categories in the context of ubiquitous Geospatial Information Systems (GIS) and AR focusing to health and environmental applications. Basic ideas, advantages, and disadvantages, as well as challenges, are discussed for each subcategory of tracking and registration techniques. We need precise enough virtual models of the environment for both calibrations of tracking and visualization. Ubiquitous GISs can play an important role in developing AR in terms of providing seamless and precise spatial data for outdoor (e.g., environmental applications) and indoor (e.g., health applications) environments.

Modulation of Bi2 MoO6 -Based Materials for Photocatalytic Water Splitting and Environmental Application: a Critical Review.

Highly active photocatalysts driving chemical reactions are of paramount importance toward renewable energy substitutes and environmental protection. As a fascinating Aurivillius phase material, Bi2 MoO6 has been the hotspot in photocatalytic applications due to its visible light absorption, nontoxicity, low cost, and high chemical durability. However, pure Bi2 MoO6 suffers from low efficiency in separating photogenerated carriers, small surface area, and poor quantum yield, resulting in low photocatalytic activity. Various strategies, such as morphology control, doping/defect-introduction, metal deposition, semiconductor combination, and surface modification with conjugative π structures, have been systematically explored to improve the photocatalytic activity of Bi2 MoO6 . To accelerate further developments of Bi2 MoO6 in the field of photocatalysis, this comprehensive Review endeavors to summarize recent research progress for the construction of highly efficient Bi2 MoO6 -based photocatalysts. Furthermore, benefiting from the enhanced photocatalytic activity of Bi2 MoO6 -based materials, various photocatalytic applications including water splitting, pollutant removal, and disinfection of bacteria, were introduced and critically reviewed. Finally, the current challenges and prospects of Bi2 MoO6 are pointed out. This comprehensive Review is expected to consolidate the existing fundamental theories of photocatalysis and pave a novel avenue to rationally design highly efficient Bi2 MoO6 -based photocatalysts for environmental pollution control and green energy development.