Antimicrobial properties of nanoparticles in the context of advantages and potential risks of their use.

The popularity of nanotechnology results from the possibility of obtaining materials that have better chemical, electrical, thermal, mechanical, or optical properties. Nano-sized materials are characterized by an increased surface area, which improves their chemical reactivity and mobility. Due to their enhanced reactivity and appropriately small size, some nanoparticles are used as antimicrobial and antifungal agents. Nanoparticles exhibit antimicrobial potential through multifaceted mechanisms. The adhesion of nanoparticles to microbial cells, and reactive oxygen species, and their penetration inside the cells, have been recognized as the most prominent modes of antimicrobial action. This review presents the mechanism of action of nanometals and oxide nanoparticles used as antimicrobials and the mechanisms of bacterial resistance to the toxic effects of nanoparticles. The article presents methods of forming microorganism resistance to the toxic effects of nanoparticles and the negative impact of nanoparticles on human health.

Large-Area 3D Hierarchical Superstructures Assembled from Colloidal Nanoparticles.

Assembling nanosized building blocks into macroscopic 3D complex structures is challenging. Here, nanosized metal and semiconductor building blocks with a variety of sizes and shapes (spheres, stars, and rods) are successfully assembled into a broad range of hierarchical (nanometer to micrometer) assemblies of functional materials in centimeter size using butterfly wings as templates. This is achieved by the introduction of steric hindrance to the assembly process, which compensates for attraction from the environmentally sensitive hydrogen bonds and prevents the aggregation of nanosized building blocks. Of these materials, Au nanostar assemblies show a superior enhancement in surface-enhanced Raman scattering (SERS) performance (rhodamine 6G, 1506 cm-1 ) under 532, 633, and 780 nm excitation-this is 3.1-4.4, 3.6-3.9, and 2.9-47.3 folds surpassing Au nanosphere assemblies and commercial SERS substrates (Q-SERS), respectively. This method provides a versatile route for the assembly of various nanosized building blocks into different 3D superstructures and for the construction of hybrid nanomaterials and nanocomposites.

Computational modeling of nanoscale and microscale particle deposition, retention and dosimetry in the mouse respiratory tract.

Comparing effects of inhaled particles across rodent test systems and between rodent test systems and humans is a key obstacle to the interpretation of common toxicological test systems for human risk assessment. These comparisons, correlation with effects and prediction of effects, are best conducted using measures of tissue dose in the respiratory tract. Differences in lung geometry, physiology and the characteristics of ventilation can give rise to differences in the regional deposition of particles in the lung in these species. Differences in regional lung tissue doses cannot currently be measured experimentally. Regional lung tissue dosimetry can however be predicted using models developed for rats, monkeys, and humans. A computational model of particle respiratory tract deposition and clearance was developed for BALB/c and B6C3F1 mice, creating a cross-species suite of available models for particle dosimetry in the lung. Airflow and particle transport equations were solved throughout the respiratory tract of these mice strains to obtain temporal and spatial concentration of inhaled particles from which deposition fractions were determined. Particle inhalability (Inhalable fraction, IF) and upper respiratory tract (URT) deposition were directly related to particle diffusive and inertial properties. Measurements of the retained mass at several post-exposure times following exposure to iron oxide nanoparticles, micro- and nanoscale C60 fullerene, and nanoscale silver particles were used to calibrate and verify model predictions of total lung dose. Interstrain (mice) and interspecies (mouse, rat and human) differences in particle inhalability, fractional deposition and tissue dosimetry are described for ultrafine, fine and coarse particles.

Review on fate, transport, toxicity and health risk of nanoparticles in natural ecosystems: Emerging challenges in the modern age and solutions toward a sustainable environment.

In today's era, nanoparticles (NPs) have become an integral part of human life, finding extensive applications in various fields of science, pharmacy, medicine, industry, electronics, and communication. The increasing popularity of NP usage worldwide is a testament to their tremendous potential. However, the widespread deployment of NPs unavoidably leads to their release into the environmental matrices, resulting in persistence in ecosystems and bioaccumulation in organisms. Understanding the environmental behavior of NPs poses a significant challenge due to their nanoscale size. Given the current environmental releases of NPs, known negative consequences, and the limited knowledge available for risk management, comprehending the toxicity of NPs in ecosystems is both awaiting and crucial. The present review aims to unravel the potential environmental influences of nano-scaled materials, and provides in-depth inferences of the current knowledge and understanding in this field. The review comprehensively summarizes the sources, fate, transport, toxicity, health risks, and remediation solutions associated with NP pollution in aquatic and soil ecosystems. Furthermore, it addresses the knowledge gaps and outlines further investigation priorities for the sustainable control of NP pollution in these environments. By gaining a holistic understanding of these aspects, we can work toward ensuring the responsible and sustainable use of NPs in today's fast-growing world.

Characterization of nanoparticles in silicon dioxide food additive.

Silicon dioxide (SiO2), in its amorphous form, is an approved direct food additive in the United States and has been used as an anticaking agent in powdered food products and as a stabilizer in the production of beer. While SiO2 has been used in food for many years, there is limited information regarding its particle size and size distribution. In recent years, the use of SiO2 food additive has raised attention because of the possible presence of nanoparticles. Characterization of SiO2 food additive and understanding their physicochemical properties utilizing modern analytical tools are important in the safety evaluation of this additive. Herein, we present analytical techniques to characterize some SiO2 food additives, which were obtained directly from manufacturers and distributors. Characterization of these additives was performed using dynamic light scattering (DLS), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), and single-particle inductively coupled plasma mass spectrometry (spICP-MS) after the food additive materials underwent different experimental conditions. The data obtained from DLS, spICP-MS, and electron microscopy confirmed the presence of nanosized (1-100 nm) primary particles, as well as aggregates and agglomerates of aggregates with sizes greater than 100 nm. SEM images demonstrated that most of the SiO2 food additives procured from different distributors showed similar morphology. The results provide a foundation for evaluating the nanomaterial content of regulated food additives and will help the FDA address current knowledge gaps in analyzing nanosized particles in commercial food additives.

Nanosized vaterite production through organic-solvent-free indirect carbonation.

Nanosized vaterite, which exhibits characteristics such as high specific surface area, porosity, and biocompatibility, has attracted research attention for use as a drug delivery material. However, fatal drawbacks such as high costs, difficulty in mass production, and toxicity exist in conventional nanosized vaterite production owing to the use of a large amount of organic solvents to forcibly suppress the vaterite recrystallization and particle growth. Therefore, nanosized 100 % vaterite was produced in this study via indirect carbonation without using any organic solvent, which has rarely been achieved previously. Seawater, sucrose, ultrasonication, and aging-which facilitate vaterite production and particle size reduction-exhibited a synergistic effect in producing vaterite. To realize nanosized vaterite production via indirect carbonation, seawater was used as a solvent, sucrose was added when Ca was eluted, and CO2 bubbling was performed under ultrasonication. Furthermore, the CaCO3-containing suspension obtained after the carbonation was aged. Ultrasonic waves were required to generate nanosized vaterite and reducing size at the carbonation stage. This nanosized-vaterite-production strategy involving organic-solvent-free indirect carbonation is meaningful, in that it highlights the potential of synthesizing vaterite in an economically sound, environmentally friendly manner for use as a pharmaceutical raw material.

Enhancement of curcumin level and hepatoprotective effect in rats through antioxidant activity following modification into nanosized particles.

Background and Aim: Developing curcumin into nanosized particles is one of the approaches to overcome the limited use of curcumin. This study aimed to prepare curcumin into nanosized particles to increase the curcumin level in the rat's liver and hepatoprotective effect in rats. Materials and Methods: Curcumin into nanosized particles formulated using ionic gelation method. Rats were divided into four groups (n = 6): Normal, negative, curcumin, and curcumin modified into nanosized particles were treated with 100 mg/kg body weight orally for 14 days. Hepatic curcumin level was investigated using liquid chromatography with tandem mass spectrometry, antioxidant activity by malondialdehyde (MDA), and hepatoprotective effect by aspartate transaminase (AST), alanine transaminase (ALT), and histopathology. Results: The curcumin level in the rat's liver in the curcumin group was 12.19 ng/mL, and that in those receiving modified into nanosized curcumin was 209.36 ng/mL. The MDA levels in the normal, negative, curcumin, and curcumin modified into nanosized particles groups were 1.88, 4.87, 3.38, and 1.04 nmol/L, respectively. The AST levels in these groups were 57.12, 130.00, 102.13, and 74.28 IU/L, and the ALT levels were 21.63, 61.97, 39.38, and 28.55 IU/L. The liver histopathology scoring showed that curcumin in nanosized particles was better than curcumin in degeneration of fat, lymphocyte infiltration, and necrosis. Conclusion: There was a 17 times increase in curcumin level in the liver of rats treated with curcumin modified into nanosized particles. Curcumin modified into nanosized particles showed more significant improvement as antioxidant and hepatoprotector than curcumin.

Energy Dissipation Rate and Micromixing in a Two-Step Micro-Reactor with Intensively Swirled Flows.

The influence of the hydrodynamics (flow rates Q, specific energy dissipation rate ε) on the micromixing in a two-step microreactor with intensively swirled flows (MRISF-2) was studied experimentally. Three methods of liquid input into the reactor were compared: (i) through the upper tangential and axial nozzles (TU1, Ax); (ii) through two upper tangential nozzles (TU1, TU2); (iii) through the upper and lower tangential nozzles (TU1, TL2). Segregation index Xs used as a measure of micromixing level was determined by means of iodide iodate reaction method. The Bernoulli equation for a device with two inputs and one output was derived to assess the energy consumption. It was revealed that in MRISF-2 up to 99.8−99.9% of input energy is dissipated, i.e., transformed into liquid element deformations thus resulting in better micromixing. For each of three liquid inputs, the dependence ε = f(Q) could be fairly approximated by an exponent ε = A1Qn1, with n1 ≈ 3.0. For connection (TU1, TU2) the dependence Xs = f(ε) falls linearly for Q > 2 L/min, but for the low flow rates (Q ≈ 1 L/min) there is an unusually small Xs value; the effect of good micromixing is caused by the kinetic energy concentrated in a small volume of liquid near the neck. The best behavior in terms of micromixing was achieved for the (TU1, Ax) connection scheme: the level of Xs ≈ 0.01 for ε ≈ 30 W/kg, and comes down with growing ε to Xs ≈ 0.002 for ε ≈ 30,000 W/kg. These values are 50 and 250 times lower compared to the mixing in a lab glass with a magnetic stirrer, as shown in our previous work. The parameters of dependencies Xs=A3εn3 were found for (TU1, Ax) and (TU1, TL2).

Solid Anorganic Particles and Chronic Rhinosinusitis: A Histopathology Study.

Although extensive research has shown the pathological effect of fine and ultrafine airborne particles, clear evidence of association of environmental exposure to them and inflammatory changes in human nasal mucosa is missing. Meanwhile, pathogenesis of chronic rhinosinusitis, despite being a disease with high prevalence in the population, is still unclear. The increasing evidence of the pro-inflammatory properties of these particles raises the question of their possible role in chronic rhinosinusitis. The presented study focused on detection of microsized anorganic particles and clusters of nanosized anorganic particles in the nasal mucosa of patients with chronic rhinosinusitis by Raman microspectroscopy and comparison of their composition to histologic findings. The results were compared to the findings in mucosa obtained from cadavers with no history of chronic rhinosinusitis. Solid particles were found in 90% of tissue samples in the group with chronic rhinosinusitis, showing histologic signs of inflammation in 95%, while in the control group, the particles were found in 20% of samples, with normal histologic findings in all of them. The main detected compounds were graphite, TiO2, amorphous carbon, calcite, ankerite and iron compounds. The results are in accordance with the premise that exogenous airborne particles interact with the nasal mucosa and possibly deposit in it in cases where the epithelial barrier is compromised in chronic rhinosinusitis.

Resonant and Sensing Performance of Volume Waveguide Structures Based on Polymer Nanomaterials.

Organic-inorganic photocurable nanocomposite materials are a topic of intensive research nowadays. The wide variety of materials and flexibility of their characteristics provide more freedom to design optical elements for light and neutron optics and holographic sensors. We propose a new strategy of nanocomposite application for fabricating resonant waveguide structures (RWS), whose working principle is based on optical waveguide resonance. Due to their resonant properties, RWS can be used as active tunable filters, refractive index (RI) sensors, near-field enhancers for spectroscopy, non-linear optics, etc. Our original photocurable organic-inorganic nanocomposite was used as a material for RWS. Unlike known waveguide structures with corrugated surfaces, we investigated the waveguide gratings with the volume modulation of the RI fabricated by a holographic method that enables large-size structures with high homogeneity. In order to produce thin photosensitive waveguide layers for their subsequent holographic structuring, a special compression method was developed. The resonant and sensing properties of new resonant structures were experimentally examined. The volume waveguide gratings demonstrate narrow resonant peaks with a bandwidth less than 0.012 nm. The Q-factor exceeds 50,000. The sensor based on waveguide volume grating provides detection of a minimal RI change of 1 × 10-4 RIU. Here we also present the new theoretical model that is used for analysis and design of developed RWS. Based on the proposed model, fairly simple analytical relationships between the parameters characterizing the sensor were obtained.

Zinc Oxide Nanoparticles Enhance Physicochemical Characteristics of Grossman Sealer.

INTRODUCTION: Metallic antibacterial nanoparticles have been shown to provide distinct antibacterial advantage and antibiofilm efficacy when applied in infected root canals. The purpose of this study was to evaluate the influence of incorporating zinc oxide nanoparticles (ZnO-Np) on the physicochemical properties of Grossman sealer. METHODS: Grossman sealer was prepared according to its original formula. Additionally, 4 experimental sealers were prepared by replacing the zinc oxide component of the powder with ZnO-Np (average size of 20 nm) in different amounts (25%, 50%, 75%, and 100%). Characterization of the setting time, flow, solubility, dimensional changes, and radiopacity were performed according to American National Standards Institute (ANSI)/American Dental Association (ADA) Specification 57. Scanning electron microscopic and energy-dispersive X-ray spectroscopic analyses were conducted to assess the ultrastructural and chemical characteristics of experimental sealers subjected to the solubility test. Statistical analyses were performed with analysis of variance and post hoc Tukey-Kramer tests with a significance level of 5%. RESULTS: A statistically significant difference in the setting time was observed among groups (P < .05), but only 25% ZnO-Np sealer complied with ANSI/ADA requirements. There was a significant difference in the flow characteristics between the control and 25% and 75% ZnO-Np experimental sealers (P < .05), but all sealers conformed to ANSI/ADA standardization; 25% ZnO-Np sealer showed significantly less solubility (1.81% ± 0.31%) and dimensional change (-0.34% ± 0.12%) than other sealers (P < .05). All sealers showed ultrastructural changes with increasing solubility. CONCLUSIONS: ZnO-Np decreased the setting time and dimensional changes characteristic of Grossman sealer; 25% ZnO-Np improved the physicochemical properties of Grossman sealer in accordance with ANSI/ADA requirements.