Geometry-induced friction at a soft interface.

Soft and biological matter come in a variety of shapes and geometries. When soft surfaces that do not fit into each other due to a mismatch in Gaussian curvatures form an interface, beautiful geometry-induced patterns are known to emerge. In this paper, we study the effect of geometry on the dynamical response of soft surfaces moving relative to each other. Using a simple experimental scheme, we measure friction between a highly bendable thin polymer sheet and a hydrogel substrate. At this soft and low-friction interface, we find a strong dependence of friction on the relative geometry of the two surfaces-a flat sheet experiences significantly larger friction on a spherical substrate than on flat or cylindrical substrate. We show that the stress developed in the sheet due to its geometrically incompatible confinement is responsible for the enhanced friction. This mechanism also leads to a transition in the nature of friction as the sheet radius is increased beyond a critical value. Our finding reveals a hitherto unnoticed mechanism based on an interplay between geometry and elasticity that may influence friction significantly in soft, biological, and nanoscale systems. In particular, it provokes us to reexamine our understanding of phenomena such as the curvature dependence of biological cell mobility.

A Hydrogel-Based Electronic Skin for Touch Detection Using Electrical Impedance Tomography.

Recent advancement in wearable and robot-assisted healthcare technology gives rise to the demand for smart interfaces that allow more efficient human-machine interaction. In this paper, a hydrogel-based soft sensor for subtle touch detection is proposed. Adopting the working principle of a biomedical imaging technology known as electrical impedance tomography (EIT), the sensor produces images that display the electrical conductivity distribution of its sensitive region to enable touch detection. The sensor was made from a natural gelatin hydrogel whose electrical conductivity is considerably less than that of human skin. The low conductivity of the sensor enabled a touch-detection mechanism based on a novel short-circuiting approach, which resulted in the reconstructed images being predominantly affected by the electrical contact between the sensor and fingertips, rather than the conventionally used piezoresistive response of the sensing material. The experimental results indicated that the proposed sensor was promising for detecting subtle contacts without the necessity of exerting a noticeable force on the sensor.

Soft interface confined DNA walker for sensitive and specific detection of SARS-CoV-2 variants.

Nucleic acid detection is conducive to preventing the spread of COVID-19 pandemic. In this work, we successfully designed a soft interface confined DNA walker by anchoring hairpin reporter probes on cell membranes for the detection of SARS-CoV-2 variants. In the presence of target RNA, the cyclic self-assembly reaction occurred between hairpin probes H1 and H2, and the continuous walking of target RNA on cell membranes led to the gradual amplification of fluorescence signal. The enrichment of H1 on membranes and the unique fluidity of membranes promoted the collision efficiency between DNA strands in the reaction process, endowing this method with high sensitivity. In addition, the double-blind test of synthetic RNA in 5% normal human serum demonstrated the good stability and anti-interference in complex environment of this method, which exhibited great potential in clinical diagnostics.

Competitive adsorption of fibronectin and albumin on hydroxyapatite nanocrystals.

Competitive adsorption of two-component solutions containing fibronectin (Fn) and albumin (Ab) on hydroxyapatite (HAp) nanocrystals was analyzed in situ using the quartz crystal microbalance with dissipation (QCM-D) technique. Adsorption of the one-component protein (Fn or Ab) and the two-component proteins adjusted to different molar ratios of Fn to Ab at a fixed Fn concentration was investigated. The frequency shift (Δf; Hz) and the dissipation energy shift (ΔD) were measured with the QCM-D technique, and the viscoelastic changes of adlayers were evaluated by the saturated ΔD/Δf value and the Voigt-based viscoelastic model. For the adsorption of the one-component protein, the Fn adlayer showed a larger mass and higher viscoelasticity than the Ab adlayer, indicating the higher affinity of Fn on HAp. For the adsorption of the two-component proteins, the viscoelastic properties of the adlayers became elastic with increase in Ab concentration, whereas the adsorption mass was similar to that of Fn in the one-component solution regardless of the Ab concentration. The specific binding mass of the Ab antibody to the adlayers increased with increase in Ab concentration, whereas that of the Fn antibody decreased. Therefore, Fn preferentially adsorbs on HAp and Ab subsequently interacts with the adlayers, indicating that the interfacial viscoelasticity of the adlayers was dominated by the interaction between Fn and Ab.

Tuning Water Slip Behavior in Nanochannels Using Self-Assembled Monolayers.

Water slip at solid surfaces is important for a wide range of micro-/nanofluidic applications. While it is known that water slip behavior depends on surface functionalization, how it impacts the molecular level dynamics and mass transport at the interface is still not thoroughly understood. In this paper, we use nonequilibrium molecular dynamics simulations to investigate the slip behavior of water confined between gold surfaces functionalized by self-assembled monolayer (SAM) molecules with different polar functional groups. We observe a positive-to-negative slip transition from hydrophobic to hydrophilic SAM functionalizations, which is found to be related to the stronger interfacial interaction between water molecules and more hydrophilic SAM molecules. The stronger interaction increases the surface friction and local viscosity, making water slip more difficult. More hydrophilic functionalization also slows down the interfacial water relaxation and leads to more pronounced water trapping inside the SAM layer, both of which impede water slip. The results from this work will provide useful insights into the understanding of the water slip at functionalized surfaces and design guidelines for various applications.

Asymmetric Structure Design of Electrolytes with Flexibility and Lithium Dendrite-Suppression Ability for Solid-State Lithium Batteries.

Solid polymer electrolytes can be used to construct solid-state lithium batteries (SSLBs) using lithium metals as the anode. However, the lifespan and safety problems of SSLBs caused by lithium dendrite growth have hindered their practical application. Here, we have designed and prepared a rigid-flexible asymmetric solid electrolyte (ASE) that is used in building SSLBs. The ASE can inhibit efficiently the growth of lithium dendrites and lead to a long cycle life of SSLBs due to the hierarchical structure of a combination of "polymer-in-ceramic" (i.e., rigid ceramic layer of Li6.4La3Zr1.4Ta0.6O12) and "LiBOB-in-polymer" (i.e., soft polymer-layer of polyethylene oxide and LiBOB components). The results demonstrated that a symmetrical battery with ASE (Li|ASE|Li) can be steadily cycled for more than 2000 h and yielded a flat plating/stripping voltage profile under a current density of 0.1 mA cm-2. As a consequence, the SSLB of LiFePO4|ASE|Li delivered a specific capacity of 155.1 mA h g-1 with a capacity retention rate up to 90.2% after 200 cycles with the Coulombic efficiency over 99.6% per cycle. This asymmetric structure combines the advantages of ceramics and polymers, providing an ingenious solution for building rigid and flexible solid electrolytes.

Origin of Hydrophilic Surface Functionalization-Induced Thermal Conductance Enhancement across Solid-Water Interfaces.

Thermal transport across solid-water interfaces is critical for a wide range of applications such as solar thermal evaporation, nanoparticle-assisted hyperthermia therapeutics, and nanofluids. Surface functionalization using self-assembled monolayers (SAMs) to change the hydrophilicity of the solid surface is a common strategy to improve the thermal conductance of solid-water interfaces. Although it is known that hydrophilic interfaces increase the interfacial bonding, how it impacts the molecular level energy transport across the interface is still not clear. In this paper, we perform molecular dynamics simulations to calculate the thermal conductance of differently functionalized gold (Au)-water interfaces. Combining the heat flux decomposition to different interatomic interactions across interfaces and analyses of water structures close to the functionalized surfaces, we found that there is a collaborative effect from the electrostatic interactions and the Lennard-Jones (L-J) interactions (especially the repulsive part). The electrostatic interactions, which are between the polar functional groups of SAMs and water, will attract water molecules closer to the SAM surface, leading both the electrostatic and L-J interactions to have larger effective forces across the interfaces. This increases the power exchanged between solid and water atoms, enhancing the thermal energy transport. The results from this work will provide new insights to the understanding of thermal transport across solid-water interfaces.

Molecular Fin Effect from Heterogeneous Self-Assembled Monolayer Enhances Thermal Conductance across Hard-Soft Interfaces.

Thermal transport across hard-soft interfaces is critical to many modern applications, such as composite materials, thermal management in microelectronics, solar-thermal phase transition, and nanoparticle-assisted hyperthermia therapeutics. In this study, we use equilibrium molecular dynamics (EMD) simulations combined with the Green-Kubo method to study how molecularly heterogeneous structures of the self-assembled monolayer (SAM) affect the thermal transport across the interfaces between the SAM-functionalized gold and organic liquids (hexylamine, propylamine and hexane). We focus on a practically synthesizable heterogeneous SAM featuring alternating short and long molecular chains. Such a structure is found to improve the thermal conductance across the hard-soft interface by 46-68% compared to a homogeneous nonpolar SAM. Through a series of further simulations and analyses, it is found that the root reason for this enhancement is the penetration of the liquid molecules into the spaces between the long SAM molecule chains, which increase the effective contact area. Such an effect is similar to the fins used in macroscopic heat exchanger. This "molecular fin" structure from the heterogeneous SAM studied in this work provides a new general route for enhancing thermal transport across hard-soft material interfaces.

A highly stretchable, transparent, and conductive polymer.

Previous breakthroughs in stretchable electronics stem from strain engineering and nanocomposite approaches. Routes toward intrinsically stretchable molecular materials remain scarce but, if successful, will enable simpler fabrication processes, such as direct printing and coating, mechanically robust devices, and more intimate contact with objects. We report a highly stretchable conducting polymer, realized with a range of enhancers that serve a dual function: (i) they change morphology and (ii) they act as conductivity-enhancing dopants in poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The polymer films exhibit conductivities comparable to the best reported values for PEDOT:PSS, with over 3100 S/cm under 0% strain and over 4100 S/cm under 100% strain-among the highest for reported stretchable conductors. It is highly durable under cyclic loading, with the conductivity maintained at 3600 S/cm even after 1000 cycles to 100% strain. The conductivity remained above 100 S/cm under 600% strain, with a fracture strain of 800%, which is superior to even the best silver nanowire- or carbon nanotube-based stretchable conductor films. The combination of excellent electrical and mechanical properties allowed it to serve as interconnects for field-effect transistor arrays with a device density that is five times higher than typical lithographically patterned wavy interconnects.