Precipitation regime changes in High Mountain Asia driven by cleaner air.

High Mountain Asia (HMA) has experienced a spatial imbalance in water resources in recent decades, partly because of a dipolar pattern of precipitation changes known as South Drying-North Wetting1. These changes can be influenced by both human activities and internal climate variability2,3. Although climate projections indicate a future widespread wetting trend over HMA1,4, the timing and mechanism of the transition from a dipolar to a monopolar pattern remain unknown. Here we demonstrate that the observed dipolar precipitation change in HMA during summer is primarily driven by westerly- and monsoon-associated precipitation patterns. The weakening of the Asian westerly jet, caused by the uneven emission of anthropogenic aerosols, favoured a dipolar precipitation trend from 1951 to 2020. Moreover, the phase transition of the Interdecadal Pacific Oscillation induces an out-of-phase precipitation change between the core region of the South Asian monsoon and southeastern HMA. Under medium- or high-emission scenarios, corresponding to a global warming of 0.6-1.1 °C compared with the present, the dipolar pattern is projected to shift to a monopolar wetting trend in the 2040s. This shift in precipitation patterns is mainly attributed to the intensified jet stream resulting from reduced emissions of anthropogenic aerosols. These findings underscore the importance of considering the impact of aerosol emission reduction in future social planning by policymakers.

Seasonal Fluctuation of Endotoxin and Protein Concentrations in Outdoor Air in Sasebo, Japan.

To determine the levels of endotoxin, which is a major component of outer membrane of Gram-negative bacteria, and protein in the atmosphere in Sasebo, Japan, we measured these biological materials in fine (aerodynamic diameter ≤2.5 µm) and coarse (≥2.5 µm) particles collected for 81 weeks (September 2014 to May 2016). The monthly concentrations (i.e., the mean value of weekly concentrations for each month) of endotoxin were higher in coarse particles than in fine particles. Fluctuations in monthly endotoxin concentrations were large in both fine (0.0005-0.0208 EU/m3) and coarse (0.0032-0.1164 EU/m3) particles. Furthermore, the endotoxin concentrations in coarse particles were highest in October 2014 and 2015 as well as September 2014 (0.0407-0.1164 EU/m3). However, the monthly protein concentrations were higher in fine particles than in coarse particles. Compared to the endotoxin concentrations, the fluctuations in the monthly protein concentrations were smaller in both coarse and fine particles. To our knowledge, this study is the first to report long-term atmospheric concentrations of endotoxin and protein in Japan. Since the endotoxin concentrations in coarse particles were positively associated with the concentrations of Na+ and Cl-, it suggests the involvement of Gram-negative bacteria from seawater to the endotoxin levels in the atmosphere. For fine particles, the protein concentrations were positively associated with the concentrations of particles, NO3- and SO42-. These results suggest that combustion of organic materials, such as biomass burning, may be a contributor to atmospheric protein during this study period.

Evaluation of airborne sensory irritants for setting exposure limits or guidelines: A systematic approach.

Sensory irritation of eyes and upper airways is an important endpoint for setting occupational exposure limits (OELs) and indoor air guidelines. Sensory irritants cause a painful burning, stinging and itching sensation. Controlled chamber studies are the "golden standard" for evaluations. Well conducted workplace studies offer another possibility. For generalization, the number of participants and their age, smoking, gender, and prior exposure, experience and mood has to be considered. Exposure assessments have to be reliable and exposure duration sufficiently long to establish time-response relationships. A potential confounding by odour has to be assessed. For workplace exposures, mixed exposure and healthy worker effects have to be evaluated. The "Alarie test" is the only validated animal bioassay for prediction of sensory irritation in humans. The mouse bioassay uses the trigeminal reflex-induced decrease in the respiratory rate. The 50% decrease (RD50) has been correlated with OELs set for sensory irritants; predicted OELs for sensory irritants are 0.03xRD50. Evaluation of the bioassay comprises the number of mice and the strain, the reliability of the exposure concentrations and exposure-response relationships, and the similar mode-of-action in mice and humans. These approaches can be used for quality assurance of reported data to set air quality guidelines.

Interprovincial Reliance for Improving Air Quality in China: A Case Study on Black Carbon Aerosol.

Black carbon (BC) is of global concern because of its adverse effects on climate and human health. It can travel long distances via atmospheric movement and can be geographically relocated through trade. Here, we explored the integrated patterns of BC transport within 30 provinces in China from the perspective of meteorology and interprovincial trade using the Weather Research and Forecasting with Chemistry (WRF/Chem) model and multiregional input-output analysis. In general, cross-border BC transport, which accounts for more than 30% of the surface concentration, occurs mainly between neighboring provinces. Specifically, Hebei contributes 1.2 µg·m(-3) BC concentration in Tianjin. By contrast, trade typically drives virtual BC flows from developed provinces to heavily industrial provinces, with the largest net flow from Beijing to Hebei (4.2 Gg). Shanghai is most vulnerable to domestic consumption with an average interprovincial consumption influence efficiency of 1.5 × 10(-4) (µg·m(-3))/(billion Yuan·yr(-1)). High efficiencies (∼8 × 10(-5) (µg·m(-3))/(billion Yuan·yr(-1))) are also found from regions including Beijing, Jiangsu, and Shanghai to regions including Hebei, Shandong, and Henan. The above source-receptor relationship indicates two control zones: Huabei and Huadong. Both mitigating end-of-pipe emissions and rationalizing the demand for pollution-intense products are important within the two control zones to reduce BC and other pollutants.

Impact assessment of PM10 cement plants emissions on urban air quality using the SCIPUFF dispersion model.

The Second-order Closure Integrated Puff (SCIPUFF) model was used to study the impact on urban air quality caused by two cement plants emissions located near the city of Caserta, Italy, during the entire year of 2015. The simulated and observed PM10 concentrations were compared using three monitoring stations located in urban and sub-urban area of Caserta city. Both simulated and observed concentrations are shown to be highest in winter, lower in autumn and spring and lowest in summer. Model results generally follow the pattern of the observed concentrations but have a systematic under-prediction of the concentration values. Measures of the bias, NMSE and RMSE indicate a good correlation between observed and estimated values. The SCIPUFF model data analysis suggest that the cement plants are major sources for the measured PM10 values and are responsible for the deterioration of the urban air quality in the city of Caserta.

[Spatial representativeness of monitoring stations for air quality in Florence (Tuscany Region, Central Italy) according to ARPAT e LaMMA. Critical observations]. / La rappresentatività spaziale delle stazioni di monitoraggio della qualità dell'aria di Firenze secondo ARPAT e LaMMA. Considerazioni critiche.

On March 2015, the Environmental Protection Agency of Tuscany Region (Central Italy) and the Laboratory of monitoring and environmental modelling published a Report on spatial representativeness of monitoring stations for Tuscan air quality, where they supported the decommissioning of modelling stations located in the Florentine Plain. The stations of Signa, Scandicci, and Firenze-Bassi, located in a further South area, were considered representative Believing that air quality of the Plain could be evaluated by these stations is a stretch. In this text the author show the inconsistency of the conclusion of the Report through correlation graphs comparing daily means of PM10 detected in the disposed stations and in the active ones, showing relevant differences between the reported values and the days when the limits are exceeded. The discrepancy is due to the fact that uncertainty of theoretical estimates is greater than the differences recorded by the stations considered as a reference and the areas they may represent. The area of the Plain has a population of 150,000 individuals and it is subject to a heavy environmental pression, which will change for the urban works planned for the coming years. The population's legitimate request for the analytical monitoring of air pollution could be met through the organization of participated monitoring based on the use of low-cost innovative tools.

A multiyear assessment of air quality benefits from China's emerging shale gas revolution: Urumqi as a case study.

China is seeking to unlock its shale gas in order to curb its notorious urban air pollution, but robust assessment of the impact on PM2.5 pollution of replacing coal with natural gas for winter heating is lacking. Here, using a whole-city heating energy shift opportunity offered by substantial reductions in coal combustion during the heating periods in Urumqi, northwest China, we conducted a four-year study to reveal the impact of replacing coal with natural gas on the mass concentrations and chemical components of PM2.5. We found a significant decline in PM2.5, major soluble ions and metal elements in PM2.5 in January of 2013 and 2014 compared with the same periods in 2012 and 2011, reflecting the positive effects on air quality of using natural gas as a heating fuel throughout the city. This occurred following complete replacement with natural gas for heating energy in October 2012. The weather conditions during winter did not show any significant variation over the four years of the study. Our results indicate that China and other developing nations will benefit greatly from a change in energy source, that is, increasing the contribution of either natural gas or shale gas to total energy consumption with a concomitant reduction in coal consumption.

Urban air quality comparison for bus, tram, subway and pedestrian commutes in Barcelona.

Access to detailed comparisons in air quality variations encountered when commuting through a city offers the urban traveller more informed choice on how to minimise personal exposure to inhalable pollutants. In this study we report on an experiment designed to compare atmospheric contaminants inhaled during bus, subway train, tram and walking journeys through the city of Barcelona. Average number concentrations of particles 10-300 nm in size, N, are lowest in the commute using subway trains (N<2.5×10(4) part. cm(-3)), higher during tram travel and suburban walking (2.5×10(4) cm(-3)5.0×10(4) cm(-3)), with extreme transient peaks at busy traffic crossings commonly exceeding 1.0×10(5) cm(-3) and accompanied by peaks in Black Carbon and CO. Subway particles are coarser (mode 90 nm) than in buses, trams or outdoors (<70 nm), and concentrations of fine particulate matter (PM2.5) and Black Carbon are lower in the tram when compared to both bus and subway. CO2 levels in public transport reflect passenger numbers, more than tripling from outdoor levels to >1200 ppm in crowded buses and trains. There are also striking differences in inhalable particle chemistry depending on the route chosen, ranging from aluminosiliceous at roadsides and near pavement works, ferruginous with enhanced Mn, Co, Zn, Sr and Ba in the subway environment, and higher levels of Sb and Cu inside the bus. We graphically display such chemical variations using a ternary diagram to emphasise how "air quality" in the city involves a consideration of both physical and chemical parameters, and is not simply a question of measuring particle number or mass.

Evaluation of submarine atmospheres: effects of carbon monoxide, carbon dioxide and oxygen on general toxicology, neurobehavioral performance, reproduction and development in rats. II. Ninety-day study.

Carbon monoxide (CO), carbon dioxide (CO2) and low-level oxygen (O2) (hypoxia) are submarine atmosphere components of highest concern because of a lack of toxicological data available to address the potential effects from long-duration, combined exposures on female reproductive and developmental health. In this study, subchronic toxicity of mixed atmospheres of these three submarine air components was evaluated in rats. Male and female rats were exposed via inhalation to clean air (0.4 ppm CO; 0.13% CO2; 20.6% O2) (control), a low-dose (5.0 ppm CO; 0.41% CO2; 17.1% O2), a mid-dose (13.9 ppm CO; 1.19 or 1.20% CO2; 16.1% O2) and a high-dose (89.9 ppm CO; 2.5% CO2; 15.0% O2) gas mixture for 23 h per day for 70 d premating and a 14-d mating period. Impregnated dams continued exposure to gestation day 19. Adverse reproductive effects were not identified in exposed parents (P0) or first (F1) and second generation (F2) offspring during mating, gestation or parturition. No adverse changes to the estrous cycle or in reproductive hormone concentrations were identified. The exposure-related effects were reduced weight gains and adaptive up-regulation of erythropoiesis in male rats from the high-dose group. No adverse, dose-related health effects on clinical data or physiological data were observed. Neurobehavioral tests identified no apparent developmental deficits at the tested levels of exposure. In summary, subchronic exposures to the submarine atmosphere gases did not affect the ability of the exposed rats or their offspring to reproduce and did not appear to have any significant adverse health effects.

Visibility characteristics and the impacts of air pollutants and meteorological conditions over Shanghai, China.

In China, visibility condition has become an important issue that concerns both society and the scientific community. In order to study visibility characteristics and its influencing factors, visibility data, air pollutants, and meteorological data during the year 2013 were obtained over Shanghai. The temporal variation of atmospheric visibility was analyzed. The mean value of daily visibility of Shanghai was 19.1 km. Visibility exhibited an obvious seasonal cycle. The maximum and minimum visibility occurred in September and December with the values of 27.5 and 7.7 km, respectively. The relationships between the visibility and air pollutant data were calculated. The visibility had negative correlation with NO2, CO, PM2.5, PM10, and SO2 and weak positive correlation with O3. Meteorological data were clustered into four groups to reveal the joint contribution of meteorological variables to the daily average visibility. Usually, under the meteorological condition of high temperature and wind speed, the visibility of Shanghai reached about 25 km, while visibility decreased to 16 km under the weather type of low wind speed and temperature and high relative humid. Principle component analysis was also applied to identify the main cause of visibility variance. The results showed that the low visibility over Shanghai was mainly due to the high air pollution concentrations associated with low wind speed, which explained the total variance of 44.99 %. These results provide new knowledge for better understanding the variations of visibility and have direct implications to supply sound policy on visibility improvement in Shanghai.

[Contemporary solutions for better air quality at electric welders workplace].

The article deals with hygienic evaluation of electric welder's workplace, concerning chemical factor, with technical solutions on organization of supply-and-exhaust ventilation and methods to improve air quality in various welding tasks.

Diagnostic air quality model evaluation of source-specific primary and secondary fine particulate carbon.

Ambient measurements of 78 source-specific tracers of primary and secondary carbonaceous fine particulate matter collected at four midwestern United States locations over a full year (March 2004-February 2005) provided an unprecedented opportunity to diagnostically evaluate the results of a numerical air quality model. Previous analyses of these measurements demonstrated excellent mass closure for the variety of contributing sources. In this study, a carbon-apportionment version of the Community Multiscale Air Quality (CMAQ) model was used to track primary organic and elemental carbon emissions from 15 independent sources such as mobile sources and biomass burning in addition to four precursor-specific classes of secondary organic aerosol (SOA) originating from isoprene, terpenes, aromatics, and sesquiterpenes. Conversion of the source-resolved model output into organic tracer concentrations yielded a total of 2416 data pairs for comparison with observations. While emission source contributions to the total model bias varied by season and measurement location, the largest absolute bias of -0.55 µgC/m(3) was attributed to insufficient isoprene SOA in the summertime CMAQ simulation. Biomass combustion was responsible for the second largest summertime model bias (-0.46 µgC/m(3) on average). Several instances of compensating errors were also evident; model underpredictions in some sectors were masked by overpredictions in others.

Air quality at outdoor community events: findings from fine particulate (PM2.5) sampling at festivals in Edmonton, Alberta.

Exposure to fine particulate matter (PM2.5) is associated with a broad range of health risks. This study assessed the impacts of cooking smoke and environmental tobacco smoke on air quality at outdoor community events in Edmonton, Alberta (Canada). Data were collected at three festivals in July-August 2011 using a portable real-time airborne particle monitor. The pooled mean PM2.5 level was 12.41 µg/m(3). Peak readings varied from 52 to 1877 µg/m(3). Mean PM2.5 near food stalls was 35.42 µg/m(3), which exceeds the WHO limit for 24 h exposure. Mean PM2.5 levels with smokers present were 16.39 µg/m(3) (all points) and 9.64 µg/m(3) (excluding points near food stalls). Although some smokers withdrew from common spaces, on average 20 smokers/hour were observed within 3 m. Extending smoking bans would improve air quality and address related concerns. However, food preparation is a more pressing area for policy action to reduce PM2.5 exposure at these community events.

[Field investigations of the air pollution level of populated territories].

The assessment and management of air quality of settlements is one of the priorities in the field of environmental protection. In the management of air quality the backbone factor is the methodology of the organization, performance and interpretation of data of field investigations. The present article is devoted to the analysis of the existing methodological approaches and practical aspects of their application in the organization and performance of field investigations with the aim to confirm the adequacy of the boundaries of the sanitary protection zone in the old industrial regions, hygienic evaluation of the data of field investigations of the air pollution level.

Levels and seasonal variations of polybrominated diphenyl ethers in the urban atmosphere of Beijing, China.

Year-round air samples were collected at Beijing on a weekly basis from 2009 to 2010, to determine the levels, gas-particle distribution, seasonal variations and compositional profiles of 8 polybrominated diphenyl ether congeners. The annual mean atmospheric concentrations of ∑7PBDEs and BDE-209 were 6.16 pg/m(3)(N.D-23.6 pg/m(3)) and 164 pg/m(3) (30.7-454 pg/m(3)), respectively. The results showed wide consumption of industrial products containing commercial deca-BDE mixtures in Beijing. The seasonal variations showed that lower brominated congeners had higher levels and greater proportions in the gaseous phase at warm sampling periods than the higher brominated counterparts.

Comparison of exposure estimation methods for air pollutants: ambient monitoring data and regional air quality simulation.

Air quality modeling could potentially improve exposure estimates for use in epidemiological studies. We investigated this application of air quality modeling by estimating location-specific (point) and spatially-aggregated (county level) exposure concentrations of particulate matter with an aerodynamic diameter less than or equal to 2.5 µm (PM(2.5)) and ozone (O(3)) for the eastern U.S. in 2002 using the Community Multi-scale Air Quality (CMAQ) modeling system and a traditional approach using ambient monitors. The monitoring approach produced estimates for 370 and 454 counties for PM(2.5) and O(3), respectively. Modeled estimates included 1861 counties, covering 50% more population. The population uncovered by monitors differed from those near monitors (e.g., urbanicity, race, education, age, unemployment, income, modeled pollutant levels). CMAQ overestimated O(3) (annual normalized mean bias=4.30%), while modeled PM(2.5) had an annual normalized mean bias of -2.09%, although bias varied seasonally, from 32% in November to -27% in July. Epidemiology may benefit from air quality modeling, with improved spatial and temporal resolution and the ability to study populations far from monitors that may differ from those near monitors. However, model performance varied by measure of performance, season, and location. Thus, the appropriateness of using such modeled exposures in health studies depends on the pollutant and metric of concern, acceptable level of uncertainty, population of interest, study design, and other factors.

The environmental impact on air quality and exposure to carbon monoxide from charcoal production in southern Brazil.

Black wattle silviculture is an important activity in southern Brazil. Much of the wood is used in the production of charcoal and the pyrolysis products impacts on air quality. This paper estimates the level of atmospheric contamination from the production of charcoal in one region of Brazil. We describe a low-cost charcoal kiln that can capture condensable gases and we estimate the levels of exposure of kiln workers to carbon monoxide. The latter results indicated that exposure to carbon monoxide can be reduced from an average of 950 ppm to 907 ppm and the mass of gases reduced by 16.8%.

[To the substantiation of the maximum allowable concentrations of the herbicide dalzlak-T in ambient air].

The paper presents the results of experimental studies of the reflectory and resorptive effects of different concentrations of the herbicide Dalzlak-T in ambient air. Hygienic regulations have been first developed and a hazard class for the agent has been defined to estimate ambient air pollution during its manufacture, storage, transportation, and agricultural application.

[Detection of potentially carcinogenic compounds persisting in atmospheric air and having high priority for hygienic regulation].

The algorithm for the choice of potentially carcinogenic compounds (PCS) among emitted into air and results of the study, undertaken for realization of this algorithm are presented. The investigation was carried out in Magnitogorsk - Russian town of black metallurgy - in frames of the other study, aimed to evaluation of the influence of atmospheric pollution on children's health and genomic instability. The 11 PCS for further profound study of biological activity were selected out of more than 300 PCS, persisting in the air. The carcinogenic activity for 6 compounds out of these 11 ones was already have been found out before, that testifies correctness of the created approach and its adequacy for detection PCS in atmospheric air.

Data sources for an environmental quality index: availability, quality, and utility.

OBJECTIVES: An environmental quality index (EQI) for all counties in the United States is under development to explore the relationship between environmental insults and human health. The EQI is potentially useful for investigators researching health disparities to account for other concurrent environmental conditions. This article focused on the identification and assessment of data sources used in developing the EQI. Data source strengths, limitations, and utility were addressed. METHODS: Five domains were identified that contribute to environmental quality: air, water, land, built, and sociodemographic environments. An inventory of possible data sources was created. Data sources were evaluated for appropriate spatial and temporal coverage and data quality. RESULTS: The overall data inventory identified multiple data sources for each domain. From the inventory (187 sources, 617 records), the air, water, land, built environment, and sociodemographic domains retained 2, 9, 7, 4, and 2 data sources for inclusion in the EQI, respectively. However, differences in data quality, geographic coverage, and data availability existed between the domains. CONCLUSIONS: The data sources identified for use in the EQI may be useful to researchers, advocates, and communities to explore specific environmental quality questions.