Preparation and characterization of a novel humanized collagen III with repeated fragments of Gly300-Asp329.

Recombinant human collagens have attracted intensive interest in the past two decades, demonstrating considerable potential in medicine, tissue engineering, and cosmetics. Several humanized recombinant collagens have been produced, exhibiting similar characteristics as the native species. To get insight into the structural and bioactive properties of different parts of collagen, in this study, the segment of Gly300-Asp329 of type III collagen was first adopted and repeated 18 times to prepare a novel recombinant collagen (named rhCLA). RhCLA was successfully expressed in E. coli, and a convenient separation procedure was established through reasonably combining alkaline precipitation and acid precipitation, yielding crude rhCLA with a purity exceeding 90%. Additionally, a polishing purification step utilizing cation exchange chromatography was developed, achieving rhCLA purity surpassing 98% and an overall recovery of approximately 120 mg/L culture. Simultaneously, the contents of endotoxin, nucleic acids, and host proteins were reduced to extremely low levels. This fragmented type III collagen displayed a triple-helical structure and gel-forming capability at low temperatures. Distinct fibrous morphology was also observed through TEM analysis. In cell experiments, rhCLA exhibited excellent biocompatibility and cell adhesion properties. These results provide valuable insights for functional studies of type III collagen and a reference approach for the large-scale production of recombinant collagens.

Effect and mechanism of signal peptide and maltose on recombinant type III collagen production in Pichia pastoris.

Recombinant type III collagen plays an important role in cosmetics, wound healing, and tissue engineering. Thus, increasing its production is necessary. After an initial increase in output by modifying the signal peptide, we showed that adding 1% maltose directly to the medium increased the yield and reduced the degradation of recombinant type III collagen. We initially verified that Pichia pastoris GS115 can metabolize and utilize maltose. Interestingly, maltose metabolism-associated proteins in Pichia pastoris GS115 have not yet been identified. RNA sequencing and transmission electron microscopy were performed to clarify the specific mechanism of maltose influence. The results showed that maltose significantly improved the metabolism of methanol, thiamine, riboflavin, arginine, and proline. After adding maltose, the cell microstructures tended more toward the normal. Adding maltose also contributed to yeast homeostasis and methanol tolerance. Finally, adding maltose resulted in the downregulation of aspartic protease YPS1 and a decrease in yeast mortality, thereby slowing down recombinant type III collagen degradation. KEY POINTS: • Co-feeding of maltose improves recombinant type III collagen production. • Maltose incorporation enhances methanol metabolism and antioxidant capacity. • Maltose addition contributes to Pichia pastoris GS115 homeostasis.

Characterization by high-resolution crystal structure analysis of a triple-helix region of human collagen type III with potent cell adhesion activity.

Collagen is one of the most abundant and important proteins in the human body. Human collagen type III (hCOL3A1) belongs to the fibril-forming collagens and is widely distributed in extensible connective tissue like skin, internal organs, or the vascular system. It plays key roles in wound healing, collagen fibrillogenesis, and normal cardiovascular development in human. The charged residues are considered to be an important characteristic of hCOL3A1, especially for collagen binding and recognition. Here we found that a triple helix fragment of hCOL3A1, Gly489-Gly510, contained multiple charged residues, as well as representative Glu-Lys-Gly and Glu-Arg-Gly charged triplets. We solved the crystal structure of this new fragment to a high-resolution of 1.50 Šand identified some important conformations of this new triple-helix region, including strong hydrogen bonds in interchain and interhelical interactions in addition to obvious flexible bending for the triple helix. We also found that the synthetic collagen peptides around this region exhibited potent activities through integrin-mediated peptide-membrane interaction. We then developed a method to produce a recombinant protein consisting of 16 tandem repeats of the triple-helix fragment of hCOL3A1 with strong activity without cytotoxicity. These results provide a strong base for further functional studies of human collagen type III and the method developed in this study can be applied to produce hCOL3A1-derived proteins or other tandem-repeat proteins with membrane adhesion activity.

Environmentally Controlled Curvature of Single Collagen Proteins.

The predominant structural protein in vertebrates is collagen, which plays a key role in extracellular matrix and connective tissue mechanics. Despite its prevalence and physical importance in biology, the mechanical properties of molecular collagen are far from established. The flexibility of its triple helix is unresolved, with descriptions from different experimental techniques ranging from flexible to semirigid. Furthermore, it is unknown how collagen type (homo- versus heterotrimeric) and source (tissue derived versus recombinant) influence flexibility. Using SmarTrace, a chain-tracing algorithm we devised, we performed statistical analysis of collagen conformations collected with atomic force microscopy to determine the protein's mechanical properties. Our results show that types I, II, and III collagens-the key fibrillar varieties-exhibit similar molecular flexibilities. However, collagen conformations are strongly modulated by salt, transitioning from compact to extended as KCl concentration increases in both neutral and acidic pH. Although analysis with a standard worm-like chain model suggests that the persistence length of collagen can attain a wide range of values within the literature range, closer inspection reveals that this modulation of collagen's conformational behavior is not due to changes in flexibility but rather arises from the induction of curvature (either intrinsic or induced by interactions with the mica surface). By modifying standard polymer theory to include innate curvature, we show that collagen behaves as an equilibrated curved worm-like chain in two dimensions. Analysis within the curved worm-like chain model shows that collagen's curvature depends strongly on pH and salt, whereas its persistence length does not. Thus, we find that triple-helical collagen is well described as semiflexible irrespective of source, type, pH, and salt environment. These results demonstrate that collagen is more flexible than its conventional description as a rigid rod, which may have implications for its cellular processing and secretion.

Single-Molecule Assay for Proteolytic Susceptibility: Force-Induced Collagen Destabilization.

Force plays a key role in regulating dynamics of biomolecular structure and interactions, yet techniques are lacking to manipulate and continuously read out this response with high throughput. We present an enzymatic assay for force-dependent accessibility of structure that makes use of a wireless mini-radio centrifuge force microscope to provide a real-time readout of kinetics. The microscope is designed for ease of use, fits in a standard centrifuge bucket, and offers high-throughput, video-rate readout of individual proteolytic cleavage events. Proteolysis measurements on thousands of tethered collagen molecules show a load-enhanced trypsin sensitivity, indicating destabilization of the triple helix.

Ziploc-ing the structure 2.0: Endoplasmic reticulum-resident peptidyl prolyl isomerases show different activities toward hydroxyproline.

Extracellular matrix proteins are biosynthesized in the rough endoplasmic reticulum (rER), and the triple-helical protein collagen is the most abundant extracellular matrix component in the human body. Many enzymes, molecular chaperones, and post-translational modifiers facilitate collagen biosynthesis. Collagen contains a large number of proline residues, so the cis/trans isomerization of proline peptide bonds is the rate-limiting step during triple-helix formation. Accordingly, the rER-resident peptidyl prolyl cis/trans isomerases (PPIases) play an important role in the zipper-like triple-helix formation in collagen. We previously described this process as "Ziploc-ing the structure" and now provide additional information on the activity of individual rER PPIases. We investigated the substrate preferences of these PPIases in vitro using type III collagen, the unhydroxylated quarter fragment of type III collagen, and synthetic peptides as substrates. We observed changes in activity of six rER-resident PPIases, cyclophilin B (encoded by the PPIB gene), FKBP13 (FKBP2), FKBP19 (FKBP11), FKBP22 (FKBP14), FKBP23 (FKBP7), and FKBP65 (FKBP10), due to posttranslational modifications of proline residues in the substrate. Cyclophilin B and FKBP13 exhibited much lower activity toward post-translationally modified substrates. In contrast, FKBP19, FKBP22, and FKBP65 showed increased activity toward hydroxyproline-containing peptide substrates. Moreover, FKBP22 showed a hydroxyproline-dependent effect by increasing the amount of refolded type III collagen in vitro and FKBP19 seems to interact with triple helical type I collagen. Therefore, we propose that hydroxyproline modulates the rate of Ziploc-ing of the triple helix of collagen in the rER.

Recombinant Collagen Engineered to Bind to Discoidin Domain Receptor Functions as a Receptor Inhibitor.

A bacterial collagen-like protein Scl2 has been developed as a recombinant collagen model system to host human collagen ligand-binding sequences, with the goal of generating biomaterials with selective collagen bioactivities. Defined binding sites in human collagen for integrins, fibronectin, heparin, and MMP-1 have been introduced into the triple-helical domain of the bacterial collagen and led to the expected biological activities. The modular insertion of activities is extended here to the discoidin domain receptors (DDRs), which are collagen-activated receptor tyrosine kinases. Insertion of the DDR-binding sequence from human collagen III into bacterial collagen led to specific receptor binding. However, even at the highest testable concentrations, the construct was unable to stimulate DDR autophosphorylation. The recombinant collagen expressed in Escherichia coli does not contain hydroxyproline (Hyp), and complementary synthetic peptide studies showed that replacement of Hyp by Pro at the critical Gly-Val-Met-Gly-Phe-Hyp position decreased the DDR-binding affinity and consequently required a higher concentration for the induction of receptor activation. The ability of the recombinant bacterial collagen to bind the DDRs without inducing kinase activation suggested it could interfere with the interactions between animal collagen and the DDRs, and such an inhibitory role was confirmed in vitro and with a cell migration assay. This study illustrates that recombinant collagen can complement synthetic peptides in investigating structure-activity relationships, and this system has the potential for the introduction or inhibition of specific biological activities.

Host tissue response by the expression of collagen to cyanoacrylate adhesives used in implant fixation for abdominal hernia repair.

The less traumatic use of surgical adhesives rather than sutures for mesh fixation in hernia repair has started to gain popularity because they induce less host tissue damage and provoke less postoperative pain. This study examines the host tissue response to a new cyanoacrylate (CA) adhesive (n-octyl, OCA). Partial defects (3 × 5 cm) created in the rabbit anterior abdominal wall were repaired by mesh fixation using OCA, Glubran2®(n-butyl-CA), Ifabond®(n-hexyl-CA) or sutures. Samples were obtained at 14/90 days for morphology, collagens qRT-PCR/immunofluorescence and biomechanical studies. All meshes were successfully fixed. Seroma was detected mainly in the Glubran group at 14 days. Meshes fixed using all methods showed good host tissue incorporation. No signs of degradation of any of the adhesives were observed. At 14 days, collagen 1 and 3 mRNA expression levels were greater in the suture and OCA groups, and lower in Ifabond, with levels varying significantly in the latter group with respect to the others. By 90 days, expression levels had fallen in all groups, except for collagen 3 mRNA in Ifabond. Collagen I and III protein expression was marked in the suture and OCA groups at 90 days, but lower in Ifabond at both time points. Tensile strengths were similar across groups. Our findings indicate the similar behavior of the adhesives to sutures in terms of good tissue incorporation of the meshes and optimal repair zone strength. The lower seroma rate and similar collagenization to controls induced by OCA suggests its improved behavior over the other two glues. This article deals with a preclinical study to examine different aspects of the repair process in the host of three alkyl cyanoacrylates (n-butyl (GLUBRAN 2), n-hexyl (IFABOND), and n-octyl cyanoacrylate (EVOBOND)) compared to sutures (control), in the fixation of surgical meshes for hernia repair. It goes into detail about collagen deposition in the repair zone at short and medium term. The results obtained demonstrate lower seroma rate and similar collagenization to sutures induced by the n-octyl suggesting better behavior than the other two cyanoacrylates.

Autologous Adipose-Derived Tissue Matrix Part I: Biologic Characteristics.

BACKGROUND: Autologous collagen is an ideal soft tissue filler and may serve as a matrix for stem cell implantation and growth. Procurement of autologous collagen has been limited, though, secondary to a sufficient source. Liposuction is a widely performed and could be a source of autologous collagen. OBJECTIVES: The amount of collagen and its composition in liposuctioned fat remains unknown. The purpose of this research was to characterize an adipose-derived tissue-based product created using ultrasonic cavitation and cryo-grinding. This study evaluated the cellular and protein composition of the final product. METHODS: Fat was obtained from individuals undergoing routine liposuction and was processed by a 2 step process to obtain only the connective tissue. The tissue was then evaluated by scanning electronic microscope, Western blot analysis, and flow cytometry. RESULTS: Liposuctioned fat was obtained from 10 individuals with an average of 298 mL per subject. After processing an average of 1 mL of collagen matrix was obtained from each 100 mL of fat. Significant viable cell markers were present in descending order for adipocytes > CD90+ > CD105+ > CD45+ > CD19+ > CD144+ > CD34+. Western blot analysis showed collagen type II, III, IV, and other proteins. Scanning electronic microscope study showed a regular pattern of cross-linked, helical collagen. Additionally, vital staing demonstrated that the cells were still viable after processing. CONCLUSIONS: Collagen and cells can be easily obtained from liposuctioned fat by ultrasonic separation without alteration of the overall cellular composition of the tissue. Implantation results in new collagen and cellular growth. Collagen matrix with viable cells for autologous use can be obtained from liposuctioned fat and may provide long term results. LEVEL OF EVIDENCE: 5.

Autologous Adipose-Derived Tissue Matrix Part II: Implantation Biology.

BACKGROUND: In part 1 of this study it was shown that liposuctioned fat could be a sufficient source of autologous collagen for use as a filler or in reconstruction. The collagen composition in liposuctioned fat was shown to form a cross-linked helical matrix composed of types II, III, and IV. Additionally, viable adipocytes and fibroblasts among other cells were found. OBJECTIVES: The purpose of this research was to study the biology of this matrix after subsequent implantation compared to Juvederm (Allergan, Parsippany, NJ) common soft tissue filler. METHODS: Fat was obtained from individuals undergoing routine liposuction and was processed by a two-step process to obtain a connective tissue matrix. The matrix was then cryo-frozen for a minimum of 4 weeks after which it was thawed and implanted in 46 nude mice. Juvederm Ultra was used as the control article and the animals followed for one year. RESULTS: Liposuctioned fat was obtained from 10 individuals and processed as previously described. Mice were harvested at 3, 6, 9, and 12 months and histology obtained. There were no adverse effects from either article and the bio-reactivity rating was 0. The implanted collagen compared favorably to Juvederm at all stages and was found to be replaced by new collagen and fat. CONCLUSIONS: A collagen matrix with viable cells for autologous use can be obtained from liposuctioned fat which has been processed and cryo-frozen. The material lasts at least one year and is slowly replaced by new collagenand fat. LEVEL OF EVIDENCE: 5.

Detection of COL III in parchment by amino acid analysis.

Cultural heritage parchments made from the reticular dermis of animals have been subject to studies of deterioration and conservation by amino acid analysis. The reticular dermis contains a varying mixture of collagen I and III (COL I and III). When dealing with the results of the amino acid analyses, till now the COL III content has not been taken into account. Based on the available amino acid sequences, we present a method for determining the amount of COL III in the reticular dermis of new and historical parchments calculated from the ratio of Ile/Val. We find COL III contents between 7 and 32 % in new parchments and between 0.2 and 40 % in the historical parchments. This is consistent with results in the literature. The varying content of COL III has a significant influence on the uncertainty of the amino acid analysis. Although we have not found a simple correlation between the COL III content and the degree of deterioration, our results show that this question must be taken into consideration in future studies of the chemical and physical deterioration of parchment measured by amino acid analysis and other analytical methods.

Characterization of the ultrashort-TE (UTE) MR collagen signal.

Although current cardiovascular MR (CMR) techniques for the detection of myocardial fibrosis have shown promise, they nevertheless depend on gadolinium-based contrast agents and are not specific to collagen. In particular, the diagnosis of diffuse myocardial fibrosis, a precursor of heart failure, would benefit from a non-invasive imaging technique that can detect collagen directly. Such a method could potentially replace the need for endomyocardial biopsy, the gold standard for the diagnosis of the disease. The objective of this study was to measure the MR properties of collagen using ultrashort TE (UTE), a technique that can detect short T2* species. Experiments were performed in collagen solutions. Via a model of bi-exponential T2* with oscillation, a linear relationship (slope = 0.40 ± 0.01, R(2) = 0.99696) was determined between the UTE collagen signal fraction associated with these properties and the measured collagen concentration in solution. The UTE signal of protons in the collagen molecule was characterized as having a mean T2* of 0.75 ± 0.05 ms and a mean chemical shift of -3.56 ± 0.01 ppm relative to water at 7 T. The results indicated that collagen can be detected and quantified using UTE. A knowledge of the collagen signal properties could potentially be beneficial for the endogenous detection of myocardial fibrosis.

Clinical, structural, biochemical and X-ray crystallographic correlates of pathogenicity for variants in the C-propeptide region of the COL3A1 gene.

Vascular Ehlers-Danlos syndrome (vEDS) is a heritable disorder of connective tissue caused by pathological variants in the COL3A1 gene, which encodes the α1 chain of type III collagen. Type III collagen is a major component of skin, arterial walls, and the gastrointestinal tract. Collagen III protein deficiency manifests as an increased risk of rupture, perforation, and dissection of these structures. The most disruptive gene variants affect the collagen helix via glycine substitutions or splice donor site mutations. The C-propeptide region of COL3A1 includes exons 49-52 and has a crucial role in initiating the C-terminal assembly of procollagen monomers in the early stages of collagen biosynthesis. Nineteen COL3A1 variants have previously been reported in these exons, of which four were associated with a severe vEDS phenotype. We identified two novel C-propeptide missense variants; p.Pro1440Leu, p.Arg1432Leu, and a non-stop mutation, c.4400A > T, p. (*1467Leuext*45). These variants produce variable phenotypes ranging from obvious acrogeria to classical or hypermobile EDS. A previously reported variant p.Lys1313Arg is of unknown clinical significance but likely benign, based on this study. Assigning disease pathogenicity remains complex, clinical phenotyping and crystal structure evidence being crucial. We briefly compare reported phenotypes for patients with missense variants in the C-propeptide domain for other human collagen disorders including COL1A1 and COL1A2 (osteogenesis imperfecta).

New strategy for expression of recombinant hydroxylated human collagen α1(III) chains in Pichia pastoris GS115.

Type III collagen is one of the most abundant proteins in the human body, which forms collagen fibrils and provides the stiff, resilient characteristics of many tissues. In this paper, a new method for secretory expression of recombinant hydroxylated human collagen α1(III) chain in Pichia pastoris GS115 was applied. The gene encoding for full-length human collagen α1(III) chain (COL3A1) without N-terminal propeptide and C-terminal propeptide was cloned in the pPIC9K expression vector. The prolyl 4-hydroxylase (P4H, EC 1.14.11.2) α-subunit (P4Hα) and ß-subunit (P4Hß) genes were cloned in the same expression vector, pPICZB. Fluorogenic quantitative PCR indicates that COL3A1 and P4H genes have been expressed in mRNA level. SDS-PAGE shows that secretory expression of recombinant human collagen α1(III) chain was successfully achieved in P. pastoris GS115. In addition, the result of amino acids composition analysis shows that the recombinant human collagen α1(III) chain contains hydroxyproline by coexpression with the P4H. Furthermore, liquid chromatography coupled with tandem mass spectrometry analysis demonstrates that proline residues of the recombinant human collagen α1(III) chain were hydroxylated in the X or Y positions of Gly-X-Y triplets.

High-level secretory expression and purification of unhydroxylated human collagen α1(III) chain in Pichia pastoris GS115.

Recombinant collagen and gelatin have been applied in biomedical materials field because of products from genetically engineered microorganisms with improved safety, traceability, reproducibility, and homogeneous quality. To obtain high-level secretory expression of single-chain full-length human collagen α1(III) chain (COL3A1) without the N and C telopeptides, the cDNA coding for the human COL3A1 gene was cloned into the secretory expression vector pPIC9K and integrated into Pichia pastoris GS115. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blotting analysis of culture supernatant from the recombinant methylotrophic yeast suggested that the unhydroxylated recombinant human COL3A1 (rhCOL3A1) was secreted into the culture medium, and exhibited an apparent molecular mass of approximately 130 kDa, which is 1.4 times higher than the theoretical one. Finally, the unhydroxylated rhCOL3A1 was purified to greater than 90% purity using a four-step approach. In addition, methylthiazolydiphenyl-tetrazolium bromide experiments indicated that low concentration of rhCOL3A1 could promote Baby hamster kidney cell (BHK21) proliferation effectively. The production and purification of rhCOL3A1 described in this study offer a new method for obtaining high level of rhCOL3A1 in relatively pure form, which is suitable for biomedical materials application.

Co-expression of recombinant human prolyl with human collagen α1 (III) chains in two yeast systems.

UNLABELLED: In this study, we co-expressed the human prolyl 4-hydroxylases (P4H) with human collagen α1 (III) (COL3A1) in an inducible system: Pichia pastoris (pPICZB), and one constitutive system: P. pastoris (pGAPZαB). The P4H catalyses the post-translational hydroxylation of proline residues in collagen strands. Conventional protein expression system such as bacteria and yeasts, which lack endogenous P4H, are not efficient for the production of recombinant collagen. In this study, the P4H gene was constructed in pGAPZαB plasmid and pPICZB plasmid respectively. These two plasmids were transformed in P. pastoris #1 that carrying COL3A1. Colony PCR analysis and sequencing after electroporation P. pastoris GS115 showed that the target gene had inserted successfully. The results of reverse transcript-qPCR, SDS-PAGE, Western blotting and LC-MS/MS analysis of the rhCOL3A1 demonstrated that the P4H was expressed successfully. Besides, it is noted that low copy number, constitutive system was suitable for hydroxylated rhCOL3A1. SIGNIFICANCE AND IMPACT OF THE STUDY: Successful co-expression of recombinant human collagen α1 (III) (rhCOL3A1) and human prolyl 4-hydroxylases (P4H) in Picha pastoris GS115, simultaneously results in the acquisition of rhCOL3A1 with hydroxylation of proline (Hyp). Further, this experiment also discusses that the high or low copy numbers and different promoters affect the Hyp degree of rhCOL3A1. Selecting more appropriate strains can express high degree Hyp of rhCOL3A1. This work will be helpful to the collagen structure study.

Design of net-charged abc-type collagen heterotrimers.

Net-negatively-charged heterospecific A:B:C collagen peptide heterotrimers were designed using an automated computational approach. The design algorithm considers both target stability and the energy gap between the target states and misfolded competing states. Structural characterization indicates the net-negative charge balance on the new designs enhances the specificity of the target state at the expense of its stability.

Vascular Ehlers-Danlos syndrome mutations in type III collagen differently stall the triple helical folding.

Vascular Ehlers-Danlos syndrome (EDS) type IV is the most severe form of EDS. In many cases the disease is caused by a point mutation of Gly in type III collagen. A slower folding of the collagen helix is a potential cause for over-modifications. However, little is known about the rate of folding of type III collagen in patients with EDS. To understand the molecular mechanism of the effect of mutations, a system was developed for bacterial production of homotrimeric model polypeptides. The C-terminal quarter, 252 residues, of the natural human type III collagen was attached to (GPP)7 with the type XIX collagen trimerization domain (NC2). The natural collagen domain forms a triple helical structure without 4-hydroxylation of proline at a low temperature. At 33 °C, the natural collagenous part is denatured, but the C-terminal (GPP)7-NC2 remains intact. Switching to a low temperature triggers the folding of the type III collagen domain in a zipper-like fashion that resembles the natural process. We used this system for the two known EDS mutations (Gly-to-Val) in the middle at Gly-910 and at the C terminus at Gly-1018. In addition, wild-type and Gly-to-Ala mutants were made. The mutations significantly slow down the overall rate of triple helix formation. The effect of the Gly-to-Val mutation is much more severe compared with Gly-to-Ala. This is the first report on the folding of collagen with EDS mutations, which demonstrates local delays in the triple helix propagation around the mutated residue.

Differences in degradation behavior of two non-cross-linked collagen barrier membranes: an in vitro and in vivo study.

OBJECTIVES: Collagen barrier membranes are used in guided bone regeneration/guided tissue regeneration because of their excellent bio- and cytocompatibility. However, they are considered to have limitations in clinical outcome because of rapid and unpredictable degradation profiles. The aim of this study was to investigate the degradation behavior of two porcine-based, non-cross-linked collagen membranes in vitro and in vivo. MATERIALS AND METHODS: Remaix™ (RX; Matricel GmbH, Herzogenrath, Germany) and Bio-Gide® (BG; Geistlich Pharma AG, Wolhusen, Switzerland) membranes were characterized by testing mechanical strength, denaturation temperature, enzymatic degradation and hydroxyproline content in vitro (n = 5 up to 16). Thereafter, both membranes were implanted subcutaneously in rats (n = 20) for up to 20 weeks to investigate tissue compatibility with respect to membrane thickness. RESULTS: BG contained a significant higher hydroxyproline content compared with RX, but RX showed a higher stress at break (dry: 11.4 (SD 2.9) vs. 5.5 (SD 1.5) N/mm(2)), higher suture retention (wet: 5.6 (SD 1.3) vs. 2.7 (SD 0.7) N), increased denaturation temperature (55.1 (SD 1) vs. 49.4 (SD 0.6)°C) and an almost twofold reduction in degradation rate (15.6% (SEM 1.3)/h vs. 24.8% (SEM 2.9)/h) in vitro. In the rat model, both membranes showed excellent tissue compatibility without signs of inflammatory reactions. Shortly after implantation, RX and BG showed moderate infiltration of mononuclear cells that appeared not to be influenced by the surface texture of the membranes. In the histomorphometric analysis, both membranes showed significant different thickness over the 20 weeks period (P = 0.0002). Although the thickness remained almost stable during the first 9 weeks after implantation, after 20 weeks, the thickness of RX decreased only slightly, whereas BG showed a thickness loss of around 50% and stronger degradation than RX. Therefore, the higher stability of RX against biodegradation found in vitro was confirmed in the animal study. CONCLUSION: This study shows differences in the biodegradation characteristics of two non-cross-linked collagen membranes in vitro and in vivo. Whether the higher stability of RX is of clinical relevance should be analyzed in future clinical investigations.

Effect of atomization on the composition and structure of recombinant humanized collagen type III.

Atomization is a treatment method to make inhaled liquids into aerosols and transport them to target organs in the form of fog or smoke. It has the advantages of improving the bioavailability of drugs, being painless, and non-invasive, and is now widely used in the treatment of lung and oral lesions. Aerosol inhalation as the route of administration of therapeutic proteins holds significant promise due to its ability to achieve high bioavailability in non-invasive pathways. Currently, a great number of therapeutic proteins such as alpha-1 antitrypsin and Dornase alfa are effective. Recombinant humanized collagen type III (rhCol III) as a therapeutic protein is widely used in the biomedical field, but atomization is not a common route of administration for rhCol III, presenting great potential for development. However, the structural stability of recombinant humanized collagen after atomization needs further investigation. This study demonstrated that the rhCol III subjected to atomization through compressed air had retained its original molecular weights, triple helical structures, and the ability to promote cell adhesion. In other words, the rhCol III can maintain its stability after undergoing atomization. Although more research is required to determine the efficacy and safety of the rhCol III after atomization, this study can lay the groundwork for future research.