Effects of alpha-tocopherol antioxidant on fracture strength and adhesion of endodontically treated teeth restored after dental bleaching.

This study evaluated the effect of different concentrations of alpha-tocopherol in gel form on fracture strength, hybrid layer formation, and microtensile bond strength of endodontically treated teeth bleached with 40% hydrogen peroxide (H2 O2 ). Sixty bovine incisors were randomized into one of six groups (n = 10 incisors per group) defined by the interventions carried out after endodontic treatment. In the control group, no additional intervention was carried out, while all teeth in the five intervention groups were bleached with 40% H2 O2 and subsequently treated with alpha-tocopherol at concentrations of 15% (15AT), 20% (20AT), or 25% (25AT), with 10% sodium ascorbate (10SA), or with nothing (40HP). Fracture strength was evaluated in a mechanical testing machine, hybrid layer formation was assessed using scanning electron microscopy, and bond strength was determined using microtensile bond-strength testing. Data were analyzed using Kruskal-Wallis and Dunn's tests. No statistically significant difference regarding fracture strength was observed among groups. Hybrid layer formation was greater in the 15AT group than in groups 40HP and 10SA. Teeth in groups 15AT, 20AT, and 25AT demonstrated higher bond strength than teeth in groups 40HP and 10SA. Alpha-tocopherol, preferably at 15%, effectively reverses the deleterious effects, of bleaching, on hybrid layer formation and bond strength to dentin.

A 22-year follow-up cross-sectional study on periapical health in relation to the quality of root canal treatment in a Belgian population.

AIM: To investigate the prevalence of apical periodontitis (AP) and the technical standard of root canal treatment in a Belgian population, assess the association of different variables with periapical status, and compare the results to a similar study conducted 22 years previously. METHODOLOGY: In this cross-sectional study, 614 panoramic radiographs of first-time adult attendees at the Dental School of the University Hospital of Ghent were examined. Recorded patient-level parameters included gender, age, number of teeth, number of root filled teeth, presence of any AP lesion, and number of implants. The following tooth-level data were collected: tooth presence, coronal status, quality of coronal restoration, post presence, type of root-filling material, length and density of root filling, root-end filling material, presence of AP, and adjacent implant. Multivariable multilevel binary logistic regression was used to explore the association between patient and tooth characteristics and AP prevalence. Risk differences and confidence intervals were calculated to compare the present with the previous study. RESULTS: The prevalence of AP at patient and tooth level was 46.9% and 5.6%, respectively. Fifty-one per cent of the 614 patients had at least one root filled tooth, and 5.9% of the 14 655 teeth studied were root filled. AP was found in 45% of root filled teeth. Fifty-four per cent of the root-filled teeth were rated as inadequate. Multivariable multilevel logistic regression revealed that more teeth, more implants, fewer root-filled teeth, adequate density, adequate coronal restoration, and no caries reduced the likelihood of AP. There were no statistically significant differences between the two studies regarding the prevalence of root-filled teeth or AP and the technical quality of root canal treatment. CONCLUSIONS: The prevalence of AP and the technical quality of root canal treatment in Belgium have not substantially changed over the last 22 years, despite the technological advancements and continuing education in the field.

Interventions in root-filled teeth identified in general dental practice: A 6-year longitudinal observational study.

AIM: To investigate what happens to cross-sectionally identified root-filled teeth over a 6-year period, regardless of the time that elapsed since primary root canal treatment, in a cohort of adult patients regularly attending a Public Dental Service. A secondary aim was to investigate how the cumulative events affecting root-filled teeth over the same time were associated with variables obtained from a baseline examination. METHODOLOGY: Adult patients with ≥1 previously root-filled tooth and regularly attending the Public Dental Service in Örebro County were enrolled for study participation in 2015. General dental practitioners examined all identified root-filled teeth in this cohort at baseline using a standardized protocol and were also responsible for further decision-making and treatments. After six years, information on events of the root-filled teeth was collected from dental records. The highest rating (most invasive treatment) on a 5-point ordinal scale was used in the analyses. Regression analyses with stepwise selection were performed for associations between patient- and tooth-related factors and events. RESULTS: A total of 445 patients with 1007 root-filled teeth were followed the entire observation time. Twenty (2.0%) of the root-filled teeth had endodontic retreatment and 150 (14.9%) were extracted over six years. Among teeth with periapical radiolucency or pain, the majority did not undergo retreatment or extraction; however, the multivariate analysis demonstrated that retreatment or extraction was associated with baseline recordings of teeth with periapical radiolucency (p < .0001), tenderness to percussion (p < .0001), and poor coronal restoration (p < .0001). CONCLUSIONS: This study corroborates the notion that in general dentistry, root-filled teeth with radiological signs of apical disease often remain untreated over time. Furthermore, it also reveals that root-filled teeth presenting with mild pain do not necessarily receive any intervention. However, teeth with baseline signs of apical periodontitis, pain, or inadequate coronal restoration were more likely to have received intervention during the six-year period.

Prevalence and virulence factors of haemolytic Enterococcus faecalis isolated from root filled teeth associated with periradicular lesions: A laboratory investigation in Thailand.

AIM: Previous endodontic research has provided limited understanding of the prevalence and roles of haemolytic and non-haemolytic Enterococcus faecalis strains in root filled teeth. This study aimed to determine the prevalence of these strains in root filled teeth with periradicular lesions and investigate their associated virulence factors. METHODOLOGY: A total of 36 root canal samples were collected from 36 subjects. The prevalence of E. faecalis was determined using culture and PCR methods. Antibiotic susceptibility of haemolytic and non-haemolytic E. faecalis strains was assessed using the broth dilution assay. The cytokine stimulation in periodontal ligament (PDL) cells and neutrophil migration were evaluated using real-time PCR and migration assay, respectively. Cell invasion ability of the strains was assessed using a cell culture model. Additionally, the virulence gene expression of the haemolytic and non-haemolytic strains was investigated using real-time PCR. The Mann-Whitney U and Spearman's ρ tests were used to examine the significant difference between the two strains and to analyse the correlation between phenotype and gene expression, respectively. RESULTS: Enterococcus faecalis was detected in 33.3% and 88.9% of samples by culture and real-time PCR, respectively. Haemolytic strains were found in 36.4% of subjects. Non-haemolytic strains exhibited susceptibility to erythromycin and varying susceptibility to tetracycline, while all haemolytic strains were resistant to both antibiotics. Haemolytic strains significantly upregulated the expression of IL-8, OPG and RANKL in PDL cells (p < .05). Notably, the fold increases in these genes were higher: IL-8 (556.1 ± 82.9 vs. 249.6 ± 81.8), OPG (2.2 ± 0.5 vs. 1.3 ± 0.2) and RANKL (1.8 ± 0.3 vs. 1.2 ± 0.1). Furthermore, haemolytic strains had a greater effect on neutrophil migration (68.7 ± 15.2% vs. 46.9 ± 11.4%) and demonstrated a higher level of internalization into oral keratinocyte cells (68.6 ± 0.4% vs. 33.8 ± 0.5%) (p < .05). They also showed enhanced expression of virulence genes associated with haemolysin, surface proteins, collagen-binding and aggregation substances. Gelatinase activity was only detectable in non-haemolytic strains. CONCLUSIONS: This study revealed that haemolytic strains E. faecalis possessed enhanced abilities in host invasion and a higher abundance of virulence factors, suggesting their potential contribution to more severe disease manifestations.

Effect of fiber-reinforced direct restorative materials on the fracture resistance of endodontically treated mandibular molars restored with a conservative endodontic cavity design.

OBJECTIVE: This study aimed to evaluate the fracture strength of teeth restored using fiber-reinforced direct restorative materials after endodontic treatment with a conservative mesio-occlusal access cavity design. MATERIALS AND METHODS: A total of 100 extracted intact mandibular first molars were selected and distributed into a positive control group where teeth left intact and the following four test groups comprised of teeth with conservative mesio-occlusal access cavities that had undergone root canal treatment (n = 20/group): access cavity without restoration (negative control), bulk-fill resin composite with horizontal glass fiber post reinforcement, fiber-reinforced composite with bulk-fill resin and bulk-fill resin composite. Following thermocycling (10,000 cycles), fracture resistance was measured using a universal testing machine. Statistical analyses (one-way analysis of variance and the Tamhane test) were performed, and statistical significance was set at p < 0.05. RESULTS: Groups with minimally invasive access cavities had lower fracture strength than intact teeth, regardless of the restoration material (p < 0.05). Fiber-reinforced composite groups demonstrated higher fracture strength than bulk-fill resin composite alone (p < 0.05). Fracture types varied among groups, with restorable fractures predominant in the fiber-reinforced composite groups. CONCLUSION: This study suggests that using fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, can effectively enhance the fracture strength of endodontically treated teeth with conservative access cavities. However, using only bulk-fill resin composite is not recommended based on the fracture strength results. CLINICAL SIGNIFICANCE: When teeth that undergo endodontic treatment are restored using a conservative access cavity design and fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, the fracture strength of the teeth can be effectively increased.

Long-term performance of ceramic in/-onlays vs. cast gold partial crowns - a retrospective clinical study.

OBJECTIVES: To assess the long-term clinical performance of ceramic in-/onlays (CIOs) and cast gold partial crowns (CGPCs) in posterior teeth in terms of success, survival, complications (biological, technical) and quality. MATERIAL AND METHODS: In a retrospective study, a total of 325 patients were recorded after up to 24.8 years (mean 13.9 ± 3.8 years) having (pre-)molars restored with CIO (Empress I, Ivoclar Vivadent, n = 161) and CGPC (Degunorm, DeguDent, n = 164) by supervised undergraduate students. A total of 296 restorations were assessed clinically and radiologically in healthy and endodontically treated teeth using modified United States Public Health Service (USPHS) criteria. Cumulative success and survival rates of the restorations were calculated using Kaplan-Meier estimates. Biological and technical complications were recorded. Status of oral health comprising caries risk and localized periodontitis were assessed. RESULTS: The cumulative success rates of CIOs were 92.1% and of CGPCs 84.2% after mean service times of 14.5 years. The annual failure rates of total service times were 0.5% in teeth restored with CIO (n = 155) and 0.7% in teeth restored with CGPC (n = 163). The cumulative survival rates of CIOs were 93.9% after a mean service time of 15.2 years and decreased to 91.7% after 23.5 years. The cumulative survival rates of CGPCs were 92.6% after a mean service time of 14.9 years and 91.8% after 23.5 years. Complications in CIOs (n = 149) were ceramic fracture (6.7%), secondary caries (4.7%), endodontic complication (2.7%) and tooth fracture (1.3%) compared to CGPCs (n = 147) with endodontic complication (8.8%), secondary caries (4.8%) and decementation (2.0%). Endodontically treated teeth restored with CIO or CGPC revealed significantly less often success compared with corresponding vital teeth (p = .02). CIOs and CGPCs revealed clinically and radiographically good and excellent qualities with 71.8% (107/149) and 68% (100/147) without any significant differences regarding type of restoration. CONCLUSIONS: Both CIOs and CGPCs achieved high survival rates up to 24.8 years when performed by supervised undergraduate students. The longevity of the restorations may benefit from the intraoral repair of accessible defects and, in case of pulp infection or necrosis, an adequate endodontic management. CLINICAL RELEVANCE: CIOs and CGPCs made by supervised undergraduate students are proper restoration types in posterior teeth in the long-term. An adequate preparation design, meticulous care in the inserting technique and constant biofilm removal due to proper oral hygiene combined with professional maintenance care are substantial. The clinical long-term performance was mostly limited by ceramic fractures in CIOs and endodontic complications in CGPCs.

Metal artifact reduction tool and mA levels impact on the diagnosis of fracture extension in endodontically treated teeth using cone-beam CT.

AIM: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT). MATERIALS AND METHODS: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05). RESULTS: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA. CONCLUSIONS: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT. CLINICAL RELEVANCE: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension.

Sinus membrane thickness of healthy endodontically treated maxillary molars.

OBJECTIVE: The study aimed to investigate the sinus membrane thickness (SMT) adjacent to healthy endodontically-treated maxillary molars with or without protruded apical foramen into the sinus cavity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Images of 207 non-smoker patients aged 18-40 were retrospectively analyzed, 140 were endodontically treated, and 136 were without endodontic treatment. Patients with any sinus pathology, teeth that have symptoms, or poor root filling were excluded. Study groups consisted of Group EM-I (endodontically treated and protruded apical foramen), Group EM-C (endodontically treated and contacted apical foramen), and similarly without endodontic treatment; Group M-I and Group M-C. SMT upon the mesial, distal, and palatal roots was measured. One-way ANOVA and Student's t-tests were performed. RESULTS: Group EM-I had the thickest sinus membrane compared to other groups (p = 0.013). SMT values were 2.37-2.60 mm in Group EM-I, and 1.34-1.58 mm in other groups. Thickening (> 2 mm) percentages were 33.45% in Group EM-I and between 4.25 and 8.25% in other groups. No statistical difference was detected between first and second molars and genders (p > 0.05). CONCLUSION: When the apical foramen protruded into the sinus cavity, the conventional root canal treatment caused a minimal (between 2.37 mm and 2.60 mm) sinus membrane thickening with a rate of 33.45% based upon CBCT examinations.

Laboratory study of fracture resistance and failure mode of porcelain laminate veneers with different preparation depths in endodontically treated teeth.

PURPOSE: To compare the fracture resistance and failure mode of porcelain laminate veneers with different preparation depths in endodontically treated teeth. METHODS: Root canal treatment was performed for 40 maxillary central incisors, and then the teeth were divided into four groups (n= 10). The preparation depths were as follows: Group A: 0.9 mm, Group B: 0.6 mm, Group C: 0.3 mm, and in all three groups, 2 mm butt joint incisal reductions were performed; Group D was a control group with no preparation. Then 30 lithium disilicate porcelain veneers were milled by CAD- CAM method and cemented. After that, all specimens were subjected to cyclic loading and thermal cycling and finally were tested by a universal testing machine until failure occurred. RESULTS: The mean failure loads (N) after exposure to continuous load were as follows: Group A: 625.70 (401.45-1037.77), Group B: 780.32 (222.93-1391.82), Group C: 748.81 (239.68-1241.87) and Group D (control) : 509.88 (84.42-1025.85) and P= 0.216. Analysis of failure mode in four groups showed that P= 0.469. There was no significant difference between the control and the other groups. In this study, 0.3, 0.6 and 0.9 mm depths of preparation for porcelain laminate veneers for endodontically treated teeth had no significant difference in fracture resistance and failure mode with non-prepared teeth. CLINICAL SIGNIFICANCE: Reasonable consideration might be given to porcelain laminate veneer treatment for teeth that have become discolored and resistant to bleaching (such as instances where discoloration is severe following root canal treatment). This approach is considered to be on the conservative side, and has demonstrated that a labial preparation depth reduction of up to 0.9 mm does not have any impact on the failure mode or fracture resistance of endodontically-treated teeth.

How loss of tooth structure impacts the biomechanical behavior of a single-rooted maxillary premolar: FEA.

To evaluate the influence of the loss of coronal and radicular tooth structure on the biomechanical behavior and fatigue life of an endodontically treated maxillary premolar with confluent root canals using finite element analysis (FEA). An extracted maxillary second premolar was scanned to produce intact (IT) 3D model. Models were designed with an occlusal conservative access cavity (CAC) with different coronal defects; mesial defect (MO CAC), occlusal, mesial and distal defect (MOD CAC), and 2 different root canal preparations (30/.04, and 40/.04) producing 6 experimental models. FEA was used to study each model. A simulation of cycling loading of 50N was applied occlusally to stimulate the normal masticatory force. Number of cycles till failure (NCF) was used to compare strength of different models and stress distribution patterns via von Mises (vM) and maximum principal stress (MPS). The IT model survived 1.5 × 1010 cycles before failure, the CAC-30.04 had the longest survival of 1.59 × 109, while the MOD CAC-40.04 had the shortest survival of 8.35 × 107 cycles till failure. vM stress analysis showed that stress magnitudes were impacted by the progressive loss of coronal tooth structure rather than the radicular structure. MPS analysis showed that significant loss of coronal tooth structure translates into more tensile stresses. Given the limited size of maxillary premolars, marginal ridges have a critical role in the biomechanical behavior of the tooth. Access cavity preparation has a much bigger impact than radicular preparation on their strength and life span.

Survival of endodontically treated teeth in public dental service in Northern Finland: a practise-based register study.

OBJECTIVE: The aim of this study was to explore the factors associated with the survival of root canal treated teeth in a practise-based study setting in a 5-year period. MATERIAL AND METHODS: This retrospective study used data from the electronic patient registration system of the public dental services of the City of Oulu, Finland. The inclusion criteria for this study were patients aged ≥ 20 years who had root canal treatment (RCT) that was initiated in 2014. One RCT per patient was included in the study. A total of 713 patients met the inclusion criteria. The outcome variable for this study was the extraction of the RCT tooth during the 5-year period. Explanatory variables included age, diagnosis, tooth type (incisive, canine, premolar, molar), RCT technique (manual, motorized), time from RCT initiation to final restoration and type of final restoration (composite, glass ionomer, fixed dental prosthesis). To evaluate the association between the outcome variable and explanatory variables, Cox regression analyses were performed. RESULTS: The overall survival rate was 91%. The middle-aged (40-59-years-old) and the oldest (60 and older) patients had a two-fold risk of extraction compared to younger (20-40-years-old) patients. Similarly, a short length of time from RCT initiation to final restoration (0-14 days) resulted in a nearly three times higher risk of extraction compared to a longer period (≥ 90 days). CONCLUSIONS: The 5-year survival rate of RCTs seems high. Extractions were more common among patients over 40 years of age and if the RCT was completed shortly after its initiation.

Fracture strength of endocrowns after thermomechanical aging.

This in-vitro study aimed to evaluate the fracture strength (FS; N) of composite, feldspathic, and glass-ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) endocrowns after thermomechanical aging. Seventy non-carious human molars were randomly divided into seven groups, according to the CAD/CAM material used for endocrown fabrication. Intact molars without cavity preparations were used as control (n = 10). Following endodontic treatment, standardized endocrown cavities were prepared and endocrowns were fabricated using composite (Cerasmart270, CS and Grandio Blocs, GB), fired and milled zirconia-reinforced lithium silicate (Celtra Duo, CD), leucite-reinforced feldspar ceramic (LRF Initial, LRF), and feldspathic (Cerec Blocks, CE) materials which were luted with universal adhesive (Futurabond U; Voco) and dual-cure resin cement (Bifix QM). Following thermocycling for 20,000 cycles and 480,000 load cycles in a chewing simulator (CS-4.2, SD Mechatronik), FS was evaluated (Instron). Data were analyzed with one-way ANOVA and post hoc Tukey's tests (p < 0.05). FS was significantly influenced by the tested material (p = 0.00). CS had the highest FS, which was not significantly different from intact molars and fired CD (p > 0.05). There were no significant differences in FS between LRF, GB, and CD, which were significantly higher than CE. Most of the failure modes of CS, CD, and GB were repairable, whereas those of CE were irreparable. All the tested materials withstood clinically relevant axial forces. Composite endocrowns exhibited more favorable fracture pattern, whereas feldspathic and leucite-reinforced feldspar ceramic endocrowns exhibited mostly irreparable fractures.

Biomechanical performance of endocrown and core-crown restorations: A systematic review.

OBJECTIVE: To assess and compare, through a systematic review of the literature, the biomechanical performance of endocrowns and traditional core-crowns (with and without intracanal post) for the rehabilitation of endodontically treated teeth with severe coronal structure damage. MATERIALS AND METHODS: A systematic search was performed in MEDLINE/PubMed, Scopus, and Web of Science databases. In-vitro studies comparing endocrowns with (post-)core-crown restorations were selected and screened by two independent reviewers. The included studies were submitted to the risk of bias analysis using the RoBDEMAT tool and the biomechanical outcomes were collected for qualitative analysis. The extracted data were presented based on comparative analyses among the included studies. RESULTS: Thirty-one studies were included: 9 studies evaluated restorations of molars, 14 for premolars, and 8 studies evaluated anterior restorations. For the majority of the studies, endocrowns showed either similar or greater survival rates under fatigue and monotonic load than (post-)core-crown restorations, irrespectively of the tooth. The endocrowns showed more favorable failure patterns than (post-)core-crowns, irrespectively of the tooth. Endocrowns produced lower stresses in the restorative material for molars and premolars and in the luting material for premolars than (post-)core-crown restorations. The included studies presented adequate information for most items of the RoBDEMAT risk of bias tool. CONCLUSION: Endocrowns showed similar or greater biomechanical performance than the traditional (post-)core-crown restorations in most of the evaluated studies. CLINICAL SIGNIFICANCE: This systematic review showed that endocrowns present either similar or greater biomechanical performance than core-crown restorations for anterior and posterior endodontically treated teeth with severe structural damage.

Clinical and laboratorial performance of rehabilitation of endodontically treated teeth: A systematic review.

OBJECTIVE: This systematic review aimed to analyze the clinical (survival rate, failure risk, or fracture) and laboratory performance (fracture mode or failure) of rehabilitations of endodontically treated teeth, with and without posts. MATERIALS AND METHODS: A systematic search was conducted in the Pubmed, Scopus, Web of Science, Embase, Cochrane Library, and OpenGrey databases up to March 2023, according to PRISMA guidelines. In vitro and clinical studies that compared the clinical and laboratory performance of endodontically treated teeth with and without intraradicular posts were included. Studies selection, data extraction, and risk of bias analysis were performed. RESULTS: Thirty-one in vitro and 7 clinical studies were included. For in vitro studies, fiberglass post (n = 24) was the most mentioned. The follow-up time of the clinical studies ranged from 1 to 17 years, with the fiber-reinforced composite post (n = 3) being the most evaluated, and only failure risk proved to be more favorable for using intraradicular posts. CONCLUSION: Rehabilitations of endodontically treated teeth with and without intraradicular retainers showed no difference in fracture resistance and failure mode, evaluated by in vitro studies. Clinical studies showed no difference in survival rate, but failure risk proved to be more favorable for the use of posts. CLINICAL SIGNIFICANCE: This analysis revealed significant variability between results, however, most laboratory and clinical studies revealed no difference with using the post. Furthermore, it is important to emphasize the need to evaluate the coronary remnant and the general characteristics of the tooth in each situation.

The fracture strength and the failure mode of lithium disilicate or resin nano ceramics as a crown, overlay, or endocrown restoration on endodontically treated teeth.

INTRODUCTION: Different materials and restorative concepts have been proposed over the years to restore endodontically treated teeth (ETT). Monolithic ceramic and composite restoration can be lute to the tooh, without the use of a post. However, little is known how the material stiffness and presence of a composite core will affect the survival and failure mode. The objective of this in-vitro study was to evaluate the fracture strength and failure mode of endodontically treated molars, restored with ceramic or hybrid composite monolithic restoration, in the presence of absence of a composite core. MATERIALS AND METHODS: Sixty depulped molars were restored with a lithium-disilicate (e.max CAD) or hybrid composite (Cerasmart) restoration. Both materials were used in a monolithic approach, but with 3 different designs: (a) monolithic endocrown, (b) crown with a separate composite core, and (c) overlay without core buildup or pulpal extension. Ten sound teeth were used as control group. All groups were thermocycled (10,000 cycles), subsequently loaded in a chewing simulator (100,000 cycles) and finally loaded until fracture. RESULTS: Peak fracture loads and failure modes were registered. No significant differences were seen between the groups in terms of fracture load. Failure modes were statistically significantly different among groups with significant correlation between restoration type and material. (p < 0.001 and p = 0.033, respectively). No group presented significantly higher fracture resistance. Although ceramic crowns and overlays presented the highest repairability, all restored ETT were within the range of the intact tooth' fracture strength. CONCLUSION: No restoration presented significant different fracture loads. However, the type of restoration and material choice were correlated to the fracture mode.

Effect of polyethylene fiber orientation on fracture resistance of endodontically treated premolars.

STATEMENT OF PROBLEM: Polyethylene fibers have been reported to improve the fracture resistance of endodontically treated teeth, but their optimal orientation is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effects of different fiber positions and orientations on the fracture resistance of endodontically treated premolar teeth. MATERIAL AND METHODS: One hundred endodontically treated maxillary premolars were divided into 2 groups according to the cavity design, mesio-occluso-distal and occluso-buccal, and each group was divided into 5 subgroups (n=10) according to the polyethylene fiber orientation on the pulpal floor: unidirectional horizontal (from mesial to distal), unidirectional vertical (from buccal to palatal), bidirectional (buccopalatal and mesiodistal), circular (around the walls), and without fibers (control group). The cavities were restored with fiber-reinforced composite resin and conventional composite resin. All the teeth were fractured with a universal testing machine and analyzed as catastrophic failure or reparable failure. A 1-way ANOVA was used to compare fracture strength values (α=.05). RESULTS: The tested groups with different fiber orientations showed significantly higher fracture load than the control group (P<.05). No statistically significant difference was observed among the fiber orientations (P>.05). Most of the favorable fractures were occlusal to the cemento-enamel junction, and adhesive failure were seen in the mesio-occluso-distal and occluso-buccal cavities. The highest percentage of unfavorable fractures and mixed failures was observed in the control group. CONCLUSIONS: The fiber orientation pattern in the mesio-occluso-distal and occluso-buccal cavities did not differ significantly in the fracture resistance of endodontically treated maxillary premolar teeth.

Influence of pretreating radicular dentin with different polyacrylic acids and isopropanol on the retention of posts.

STATEMENT OF PROBLEM: The optimal pretreatment of radicular dentin before cementing a post with glass ionomer cement is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the retention of prefabricated tapered titanium posts to endodontically treated teeth after applying different pretreatment protocols on the radicular dentin. MATERIAL AND METHODS: The coronal part of 32 single-rooted human teeth was removed 1-mm coronally to the cemento-enamel junction. All specimens received endodontic treatment, and the root canals were prepared with an instrument to a depth of 10 mm to receive a titanium post. The dentin walls of each specimen were roughened with a hand-held diamond cutting instrument. The specimens were randomly divided according to the surface treatments into 4 groups (n=8): KW: etched with 20% to 30% polyacrylic acid (PAA) (Ketac Conditioner) and rinsed with water; KWI: etched with 20% to 30% PAA, rinsed with water and 70% isopropanol; DW: etched with 30% to 50% PAA (Durelon Liquid) and rinsed with water; DWI: etched with 30% to 50% PAA, rinsed with water and 70% isopropanol. The prefabricated titanium posts were airborne-particle abraded and cemented with glass ionomer cement. The specimens were fixed in custom-made brass cylindrical holders with autopolymerizing acrylic resin with the holder parallel to the long axis of the post. All specimens were stored in water for 3 days at 37 °C. Retention was evaluated using a tensile test with a universal testing machine (Zwick Z010) at a crosshead speed of 2 mm/min. Data were statistically analyzed with a 1-way ANOVA, followed by the Tukey post hoc test for pairwise comparisons between groups (α=.05). RESULTS: Mean ±standard deviation retention values ranged from 201.8 ±55.5 N (KW) to 328.1 ±70.9 N (DWI). Groups DWI and KWI (316 ±58.3 N) showed statistically higher retention values than group KW (P<.05) but did not significantly differ from retention values obtained in group DW (P>.05). CONCLUSIONS: An additional final rinse with isopropanol after using PAA increased the retention of the post significantly for all groups. Although group DWI achieved the highest retention values, pretreatment of radicular dentin as in group KWI may also be considered.

Two-year clinical performance of indirect resin composite restorations in endodontically treated teeth with different cavity preparation designs: a randomized clinical trial.

TRIAL DESIGN: This is a randomized, controlled, superiority, double-blinded, parallel-group, two-arms trial with an allocation ratio of 1:1. This study aimed to assess whether the cavity design could affect the clinical performance of the CAD/CAM generated indirect resin composite restoration in endodontically treated teeth (ETT) evaluated using the Modified USPHS criteria after a two-year follow up. METHODS: A total of 30 participants who underwent endodontic treatment for MOD cavities in permanent molars were divided randomly into two parallel groups (n = 30 restorations) according to the performed cavity design to group 1 in which there was no cuspal reduction (inlay) and group 2 in which cuspal reduction was performed (overlay). All pulp chambers were filled with bulk fill flowable composite, and the cavities were prepared following the criteria of the cavities for indirect restorations and restored using nano-hybrid composite resin blocks (Brilliant, Coltene, Switzerland). The restorations were evaluated using the modified USPHS criteria at baseline, six months, one-year and two years follow-up visits. For qualitative data, frequencies (n) and percentages (%) were used to display the data, while mean and standard deviation (SD) were used for quantitative data. The normality of the data was evaluated using the Shapiro-Wilk and Kolmogorov-Smirnov tests. For every test, P ≤ 0.05 was used as the significance threshold. RESULTS: Twenty-six individuals completed the follow-up period after receiving the assigned intervention.The inter-group comparison showed that, at the 6- months and 12- months observation points, the overlay design had significantly better marginal adaptation, less incidence of discoloration or tooth/restoration fracture, and similar marginal integrity and caries incidence to the inlay design. After 24- months, the overlay design still had better marginal adaptation, less incidence of discoloration or tooth/restoration fracture and less caries incidence in comparison to the inlay design, while there was no difference in the marginal integrity between either design. CONCLUSIONS AND CLINICAL RELEVANCE: Cuspal reduction in endodontically treated teeth showed better clinical performance than the cusp preservation thus, the former is more reliable.

Optimizing fracture resistance of endodontically treated maxillary premolars restored with preheated thermos-viscous composite post-thermocycling, a comparative study. Part I.

PURPOSE: This research aimed to investigate fracture resistance of endodontically treated maxillary premolars restored using preheated thermo-viscous and fiber-reinforced bulk fill resin composite, in vitro. METHODOLOGY: Sixty sound human maxillary premolars were selected and divided randomly into 6 groups of ten teeth each (n = 10). Group 1; is the positive control with sound unprepared teeth (P), Group 2; is the negative control in which Mesio-occluso-distal (MOD) cavities were left unrestored (N), Group 3; includes the teeth restored by incremental packing with conventional nanohybrid composite (ChP), Group 4; includes teeth restored with short fiber reinforced bulk fill composite (EF), Group 5; includes teeth restored with preheated thermo-viscous bulk fill composite (VB), and Group 6; includes teeth restored using packable bulk fill composite (XF) Tested restorative materials were bonded with a universal adhesive in self-etch mode. Teeth were kept in distilled water for 24 h at 37 °C proceeded by thermocycling (5- 55 °C, 1200×). Teeth were then exposed to compressive load till fracture at a crosshead speed of 1 mm/min. One-way ANOVA followed by Tukey post-hoc test was implemented to compare between more than two groups in non-related samples. The significance level was established at α = 0.05 for both tests. RESULTS: Intact teeth significantly recorded the highest fracture resistance values among all groups. A significant difference was recorded among all the tested groups, with the EF recording the highest values, followed by the VB group then the XF group and ChP that recorded the lowest data. Negative control premolars significantly recorded the lowest fracture. CONCLUSIONS: After thermocycling, endodontically treated maxillary premolars restored with pre-heated thermos-viscous composite did not exhibit an increase in fracture resistance. Notably, our findings indicate that short fiber-reinforced composite demonstrated significantly higher fracture resistance compared to other types of composites assessed in this study. This suggests the potential superiority of short fiber-reinforced composite in enhancing the overall structural integrity of endodontically treated teeth subjected to occlusal forces.

Clinical performance of polyethylenefiber reinforced resin composite restorations in endodontically treated teeth: (a randomized controlled clinical trial).

AIM: The purpose of this study was to evaluate the performance of polyethylene fiber reinforced resin composite fillings compared to bulk fill resin composite fillings in endodontically treated teeth over a two-year monitoring period. METHOD: A total of 240 individuals with endodontically treated lower molars and a moderate amount of tooth structure were divided into two equal groups of 120 each. One group received polyethylene fiber reinforced bulk fill resin composite restorations while the other group received only bulk fill resin composite restorations, both applied as per manufacturer guidelines. Two proficient experienced blinded assessors assessed the restorations using modified USPHS criteria at baseline, 6, 12, and 24 months. STATISTICAL ANALYSIS USED: Data analysis involved the utilization of Mann-Whitney U, Friedman's test, and Nemenyi post hoc test, with age data being displayed as mean and standard deviation. The significance level was established as p < 0.05, and R software was utilized for statistical analysis. RESULTS: There were no notable distinctions in any parameters or scores between the intervention and comparator groups at various time points. Alpha scores were present for retention, gross fracture, and secondary caries at all follow up intervals. CONCLUSION: Both direct resin composite restorations reinforced with polyethylene fibers and direct bulk fill resin composite restorations placed in endodontically treated molars with moderate remaining tooth structure demonstrated satisfactory clinical outcomes during a 24-month follow-up period. CLINICAL RELEVANCE: Bulk fill resin composites directly placed in endodontically treated molars with moderate remaining tooth structure showed promise as a treatment option over a two-year period. CLINICAL TRIAL REGISTRATION: (06-01-2022) on https://ClinicalTrials.gov with the ID (NCT05180903).