New alginate-gelatine method for casting of staining inside firearm barrels.

Contact shots to the head often leave behind biological traces inside firearm barrels, a phenomenon of great forensic interest. Until now, the visualization and preservation of these traces presented a significant challenge, lacking a reliable method. This study addresses this gap by searching for a suitable method to extract the traces within a casting. Using alginate or gelatine as suitable materials, the results were hampered by serious adhesion issues and their extraction out of the firearm barrel was impeded. Finally, the combination of 11% gelatine with 1% alginate, introduced into the barrel around a 'central spine', succeeded to consistently produce replicable castings. Experimental contact shots displayed a distinct staining gradient from the muzzle to the rear of the barrel, as revealed through endoscopy and proved in the macroscopic casting. The technique proved effective for various common handgun barrels and successfully preserved blood and gunshot residue (GSR) patterns within the barrel. This method offers the dual benefits of visually mapping staining patterns and securing localized samples for targeted molecular genetic analysis in forensic investigations.

Skin simulants for wound ballistic investigation - an experimental study.

Gunshot wound analysis is an important part of medicolegal practice, in both autopsies and examinations of living persons. Well-established and studied simulants exist that exhibit both physical and biomechanical properties of soft-tissues and bones. Current research literature on ballistic wounds focuses on the biomechanical properties of skin simulants. In our extensive experimental study, we tested numerous synthetic and natural materials, regarding their macromorphological bullet impact characteristics, and compared these data with those from real bullet injuries gathered from medicolegal practice. Over thirty varieties of potential skin simulants were shot perpendicularly, and at 45°, at a distance of 10 m and 0.3 m, using full metal jacket (FMJ) projectiles (9 × 19 mm Luger). Simulants included ballistic gelatine at various concentrations, dental silicones with several degrees of hardness, alginates, latex, chamois leather, suture trainers for medical training purposes and various material compound models. In addition to complying to the general requirements for a synthetic simulant, results obtained from dental silicones shore hardness 70 (backed with 20 % by mass gelatine), were especially highly comparable to gunshot entry wounds in skin from real cases. Based on these results, particularly focusing on the macroscopically detectable criteria, we can strongly recommend dental silicone shore hardness 70 as a skin simulant for wound ballistics examinations.

Ballistic long bone fracture pattern: an experimental study.

When dealing with badly preserved cadavers or skeletal human remains, the assessment of death circumstances remains challenging. When forensic evidence cannot be taken from the skin and soft tissue, the information may only be deduced from more resistant elements such as bone. Compared to cranial gunshot injuries, reliable data on ballistic long bone trauma remains scarce. This study aims to define ballistic fracture characteristics in human long bones. The shaft of 16 femurs and 13 humeri from body donors was perpendicularly shot with a 9-mm Luger full metal jacket bullet at an impact velocity of 360 m/s from a distance of 2 m. Some bones were embedded in Clear Ballistics Gel®, and some were shot without soft tissue simulant in order to better visualise the fracture propagation on the high-speed camera. The fractures were examined macroscopically and compared between the sample groups. We consistently found comminuted fractures with a stellate pattern. Fracture details were classified into entrance, exit and general characteristics. For some traits, we detected different occurrence values in the group comparison. The results indicate that some of the traits depend on bone properties such as shaft diameter, bone length and cortical thickness. The presence of ballistic gel also influenced some fracture traits, emphasising the relevance of soft tissue simulant in osseous gunshot experiments. This study revealed new insights in the detailed fracture pattern of human long bones. These may serve as guidelines for the identification and reconstruction of gunshot trauma in human long bones.

Multiple nail gun injuries: suicide or homicide?

Nail gun injuries are a forensic problem; it can be difficult to distinguish self-inflicted injuries from accident and homicide instances. This kind of injuries shares some characteristics with both gunshot and puncture wounds. We describe a peculiar case of a man who committed suicide driving nails into his skull using a pneumatic nail gun. Entrance wounds were found on both temporal regions of the head. Reviewing scientific literature, this is the first case in Italy reporting the macroscopic data of bilateral head and brain nail gun injuries during an autopsy. Circumstantial elements were not sufficient to clarify if these lesions were self-inflicted, inflicted by accident, or else. Radiological examination can be helpful to show the exact location of the nails, but it has also its own limitations. We firmly believe that autopsy, especially the head section, is crucial to identify the nature and the extension of these lesions, thus giving us much more information about the mechanism of death and the circumstances in which it occurred.

Forensic Analysis of the Abraham Lincoln Assassination: An On-Site Study of the Presidential Box at Ford's Theatre.

ABSTRACT: On April 14, 1865, Abraham Lincoln was assassinated while watching a play from the Presidential Box at Ford's Theatre in Washington, DC. There is still controversy concerning the findings of Lincoln's autopsy. The physicians that attended the autopsy documented that the bullet entered the left occipital region of the brain, but opinions differ as to the path the bullet took through the brain. The official autopsy report documented that the bullet traveled through the left brain and did not cross the midline. Others who watched the autopsy claimed that the bullet entered on the left side of the president's brain, crossed the midline, and ended up just above the orbit on the right. In this manuscript, we reviewed all of the statements of the witnesses to the assassination in an effort to reconstruct the approach that John Wilkes Booth, the assassin, took through the Presidential Box as he approached the president. In addition, we conducted an on-site analysis of the shape and dimensions of the Presidential Box at Ford's Theatre to support the approach that Booth took. Based on this forensic analysis, we provide supportive evidence that the findings of the official autopsy report are accurate; that is, the bullet that entered the president's left brain stayed on the left and did not cross the midline.

Practical application of synthetic head models in real ballistic cases.

In shooting crimes, ballistics tests are often recommended in order to reproduce the wound characteristics of the involved persons. For this purpose, several "simulants" can be used. However, despite the efforts in the research of "surrogates" in the field of forensic ballistic, the development of synthetic models needs still to be improved through a validation process based on specific real caseworks. This study has been triggered by the findings observed during the autopsy performed on two victims killed in the same shooting incident, with similar wounding characteristics; namely two retained head shots with ricochet against the interior wall of the skull; both projectiles have been recovered during the autopsies after migration in the brain parenchyma. The thickness of the different tissues and structures along the bullets trajectories as well as the incident angles between the bullets paths and the skull walls have been measured and reproduced during the assemblage of the synthetic head models. Two different types of models ("open shape" and "spherical") have been assembled using leather, polyurethane and gelatine to simulate respectively skin, bone and soft tissues. Six shots have been performed in total. The results of the models have been compared to the findings of post-mortem computed tomography (PMCT) and the autopsy findings.Out of the six shots, two perforated the models and four were retained. When the projectile was retained, the use of both models allowed reproducing the wounds characteristics observed on both victims in terms of penetration and ricochet behaviour. However, the projectiles recovered from the models showed less deformation than the bullets collected during the autopsies. The "open shape" model allowed a better controlling on the shooting parameters than the "spherical" model. Finally, the difference in bullet deformation could be caused by the choice of the bone simulant, which might under-represent either the strength or the density of the human bone. In our opinion, it would be worth to develop a new, more representative material for ballistic which simulates the human bone.

Nothing but hot air?-On the molecular ballistic analysis of backspatter generated by and the hazard potential of blank guns.

Blank cartridge guns are prevalent especially in countries with laws restricting access to conventional firearms, and it is a common misconception that these weapons are harmless and only used as toys or for intimidation. However, although their harming potential is well-documented by numerous reports of accidents, suicides, and homicides, a systematic molecular biological investigation of traces generated by shots from blank cartridges at biological targets has not been done so far. Herein, we investigate the occurrence and analyzability of backspatter generated by shots of different types of blank cartridge guns firing different types of blank ammunition at ballistic gelatin model cubes doped with human blood and radiological contrast agent soaked into a spongious matrix and covered with three different variants of skin simulants. All skin simulants were penetrated, and backspatter was created in 100% of the shots in amounts sufficient for forensic short tandem repeat (STR) typing that resulted in the correct identification of the respective blood donor. Visible backspatter was documented on the muzzle and/or inside the barrel in all cases, and in 75% of cases also on the outer surfaces and on the shooter's hand(s). Wound cavities were measured and ranged between 1 and 4.5 cm in depth. Discussing our findings, we provide recommendations for finding, recovering, and analyzing trace material from blank guns, and we demonstrate the considerable hazard potential of these devices, which is further emphasized by the presentation of a comprehensive overview of the pertinent literature on injuries inflicted by blank guns.

Ten years of molecular ballistics-a review and a field guide.

Molecular ballistics combines molecular biological, forensic ballistic, and wound ballistic insights and approaches in the description, collection, objective investigation, and contextualization of the complex patterns of biological evidence that are generated by gunshots at biological targets. Setting out in 2010 with two seminal publications proving the principle that DNA from backspatter collected from inside surfaces of firearms can be retreived and successfully be analyzed, molecular ballistics covered a lot of ground until today. In this review, 10 years later, we begin with a comprehensive description and brief history of the field and lay out its intersections with other forensic disciplines like wound ballistics, forensic molecular biology, blood pattern analysis, and crime scene investigation. In an application guide section, we aim to raise consciousness to backspatter traces and the inside surfaces of firearms as sources of forensic evidence. Covering crime scene practical as well as forensic genetic aspects, we introduce operational requirements and lay out possible procedures, including forensic RNA analysis, when searching for, collecting, analyzing, and contextualizing such trace material. We discuss the intricacies and rationales of ballistic model building, employing different tissue, skin, and bone simulants and the advantages of the "triple-contrast" method in molecular ballistics and give advice on how to stage experimental shootings in molecular ballistic research. Finally, we take a look at future applications and prospects of molecular ballistics.

Comparison between computed tomography and silicone-casting methods to determine gunshot cavities in ballistic soap.

Current methods used in terminal ballistics to determine the volume of temporary cavities created by projectiles in soft tissue simulants (such as ballistic soap) usually involve silicone-casting to obtain the cavity moulds. However, these methods have important drawbacks including their little sensitivity and precision, besides the fact that they are destructive. Imaging techniques such as computed tomography (CT) might not only overcome those limitations but also offer useful tools for digitally reporting the scientific results. This work accomplished the 3D digital reconstruction of the cavities created by different projectiles in ballistic soap blocks. This way, the total volume of the cavities, the projectile penetration depths, and other measurements were determined, rendering better capabilities when compared to the current silicone method. All these features were achieved through the CT analysis and 3D Slicer imaging software. In addition, it is worth mentioning that the method can preserve the evidence by digitally obtaining, signing, and storing the infographic videos displaying the 3D-reconstructed cavities. Graphical abstract.

G2 Research Radically Invasive Projectile: The Importance of Recognizing Its Imaging and Autopsy Patterns.

ABSTRACT: Many fragmenting and frangible projectiles have been developed in the course of firearm history. In addition, partially because of the concerns of range and environmental contamination, bullets constructed without lead have become increasingly common. A case regarding a unique projectile that incorporates both features, the G2 Research Radically Invasive Projectile ammunition, is discussed in this article. Here we report a 25-year-old woman who died of multiple gunshot wounds caused by G2 Research Radically Invasive Projectile ammunition. Because of the bullet's unique design, the wounds demonstrated characteristic radiographic patterns and unique autopsy findings. Familiarity with these findings is important to forensic pathologists in terms of case documentation, projectile recovery, and personal safety.

Effects of police body armour on overmatching ballistic injury.

Overmatching occurs when body armour that has been designed to resist perforation by a specified projectile is perforated by a greater threat. This may result in wounding to the body armour wearer. In this work, overmatching of two types of police body armour was studied using two types of ammunition. The use of a 250-mm-long gelatine block to represent the depth of the human torso combined with armour panels mounted on the anterior and posterior of the block allowed for a more realistic simulation to be completed. There was some evidence to suggest that overmatching events could lead to increased levels of damage during a survivable incident compared with no body armour being present. This information is of interest to armour designers and medical personnel that might treat such wounds.

The influence of muzzle gas on the temporary cavity.

Shot range, the muzzle-target distance, is a crucial parameter for forensic reconstruction of deaths by firearms. In a large number of cases, especially suicides, the forensic pathologist is confronted with contact or near-contact shots, where muzzle gases play an additional role. This study was conducted to systematically investigate the influence of muzzle gases on the temporary cavity (TC). A total of 72 shots were fired using full metal-jacketed bullets in four forensically relevant calibres from 10-, 5-, 3-, 2- and 1-cm distance and in close contact. Target model was the so-called reference cube (10% gelatine at 4 °C) with 12-cm edge length. The TC was recorded using high-speed video (HSV). Cross-sectional analysis was performed by cutting the blocks to 1-cm slices, which were evaluated by applying the polygon method. The TC of shots from 10 and 5 cm distance had a tubular form. This aspect changed depending on the cartridge with decreasing distance (≤ 3 cm) into a pear-like form, which was typical for contact shots. The cumulated heights of the TC increased with decreasing distance below 3 cm. Contact shots approximately doubled the extension of the TC compared with exclusive energy transfer. Whereas HSV documented an increasingly asymmetric profile with ballooning at the entry side, cross-sectional analysis of cracks in gelatine resulted in convex graphs with only slight asymmetry for contact shots. Additional damage in gelatine was detected for 3-cm distance or less in calibre .357 Magnum and ≤ 2 cm for .32 auto, .38 special and 9mm Luger. The increasing influence of muzzle gas pressure is detectable with decreasing shot range below 3 cm.

Preliminary effect of projectile yaw on extremity gunshot wounding in a cadaveric animal model: a serendipitous study.

Gunshot wounding (GSW) is capable of causing devastating tissue injuries by delivering kinetic energy (KE) through the contact surface area of a projectile. The contact surface area can be increased by yaw, deformation and fragmentation, all of which may be caused by any intermediate layers struck by the projectile prior to entering its target. This study aims to describe whether projectile yaw occurring before penetration of a cadaveric animal limb model causes greater damage with or without clothing layers present using 5.45 × 39 mm projectiles. In total, 12 fallow deer hind limbs were shot, further divided into 4 with no clothing layers (Cnil), 4 with a single clothing layer (Cmin) and 4 with maximum clothing layers (Cmax) as worn on active duty by UK military personnel. Contrast computed tomography (CT) of limbs was used to measure permanent cavity size and the results were compared using analysis of variance (ANOVA). No significant differences were found among clothing states for each series of measurements taken, with greater cavity sizes noted in all clothing states. This is in contrast to previous work looking at symmetrically flying projectiles in the same model, where a larger permanent cavity was found only with Cmax present. Projectile yaw is therefore likely to be a key variable with regard to causation of damage within this extremity wound model.

A distant relationship?-investigation of correlations between DNA isolated from backspatter traces recovered from firearms, wound profile characteristics, and shooting distance.

In molecular ballistics, where traces originating from the use of firearms against biological targets are investigated, "backspatter" traces are of particular importance. This biological material comprising blood and tissue from the victim is propelled back from the bullet entry site towards the direction of the shooter and can consolidate and persist on the inner and outer surfaces of the firearm, from where it can be collected and analyzed. Thus, a connection between the weapon and the victim can be established solely by molecular biological trace analysis. For the criminalistic investigation of gun-related crimes, the determination of the distance between the weapon and the victim can be of critical importance in reconstructing the circumstances of a crime. In this study, we investigated possible correlations between the shooting distance and the amount of backspatter in/on the used firearm. To this purpose, we employed a previously established skull model and performed shootings in triplicates from various distances up to 50 cm with two types of handguns (pistol and revolver). Backspatter was collected from various sampling locations, and DNA contents were quantified. A post-shooting wound channel evaluation was conducted by optical and radiological evaluation. The obtained DNA yields varied considerably between replicates from the same and from different distances. In contrast, apart from contact shots, no meaningful differences were observable in wound channel evaluations. In summary, no meaningful correlation between backspatter distribution and DNA yields, the shooting distance and the condition of the wound channel could be established.

The ballistic performance of bone when impacted by fragments.

Physical models are required to generate the underlying algorithms that populate computer simulations of the effects of explosive fragmenting devices. These models and simulations are used for understanding weapon performance, designing buildings and optimising personal protective equipment. Previous experimental work has investigated the performance of skin and muscle when subjected to fragmentation threats, but limited evidence exists for the performance of bone when impacted by fragments. In the current work, ballistic testing was conducted using two types of internationally recognised steel fragment simulating projectiles (FSPs): (i) 5.5 mm diameter (0.68 g) ball bearing (BBs) and (ii) 1.10 g chisel nosed (CN). These projectiles were fired at isolated swine ribs at impact velocities between 99 and 1265 m/s. Impact events were recorded using a high-speed camera. Selected specimens were analysed post-impact with plain x-radiographs and micro-CT scanning to determine damage to the bone architecture. Bones were perforated with a kinetic energy density (KED) as low as 0.14 J/mm2. Energy transfer to the bone was greater for the CN FSPs, resulting in increased bone damage and the production of secondary bone fragments. The manner in which the bones failed with faster velocity impacts (> 551 m/s; KED > 6.44 J/mm2) was analogous to the behaviour of a brittle material. Slower velocity impacts (< 323 m/s; KED < 1.49 J/mm2) showed a transition in failure mode with the bone displaying the properties of an elastic, plastic and brittle material at various points during the impact. The study gives critical insight into how bone behaves under these circumstances.

The punched-out tissue complex (skin-bone "imprimatum") in shots from captive-bolt guns: does it act as a secondary projectile?

From the first half of the twentieth century to the present day, injuries and fatalities from captive-bolt livestock stunners are a major topic in forensic medicine. The vast majority of cases account for suicides with the frontal, temporal, parietal, and occipital regions being the most common sites of entrance (in descending order of frequency). Due to the limited length of the bolt, the corresponding wound channel within the braincase is only several centimeters long. It has been a controversial subject for a long time, whether the skin-bone complex punched out by the conically grooved end of the steel rod may act as a "secondary projectile" being propelled beyond the actual path of the bolt. To answer this question, experimental shots from various types of captive bolt-guns were fired to simulants. Video-documentation employing a high-speed motion camera showed that the punched-out pieces of skin and bone did not move further than the bolt. Thus, a secondary extension of the total wound channel could not be observed. However, the suction effect caused by the bolt's rearward movement may induce a slight retrograde displacement of the skin-bone complex.

Shooting through windscreens: ballistic injury assessment using a surrogate head model-two case reports.

A synthetic head model developed to reproduce military injuries was assessed in two different scenarios involving shooting through intermediate targets (a laminated vehicle windscreen in scenario 1 and a military helicopter windscreen in scenario 2) with 7.62 × 39-mm mild steel core (MSC) ammunition. The injury patterns resulting from the two scenarios were assessed by a military radiologist and a forensic pathologist with combat injury experience and found to be clinically realistic.

Firearm Injury From Hunting .30 Caliber Bullet Passing Through an Intermediate Target (Binoculars): A Reconstruction of Events.

This article presents the results of research relating to the ricocheting of hunting ammunition and the application of these results to the investigation of a specific gunshot death, which occurred during a hunt for boars. The scene and autopsy findings revealed that a bullet had first struck a pair of binoculars around the victim's neck before entering his body. As the investigation proceeded, however, questions were raised as to whether the shot was a direct one or a ricochet. The case was thus referred to forensic medicine experts for their opinion. Experiments were conducted, which demonstrated that, although test ammunition could ricochet, the rebound fragments possessed insufficient kinetic energy to pierce the binoculars. On the basis of the experiments, it was determined that the victim had been killed by a direct shot and that the bullet had pierced the intermediate target of the binoculars before entering his body. The possibility of a ricochet producing the injuries found, that is, the victim being struck with a bullet or fragments rebounding from an obstacle, was considered unlikely.

Committing Suicide With Handgun Wounds in the Head Using a Defective Firearm: About 2 Unusual Autopsy Cases.

We report 2 unusual autopsy cases with head handgun wounds using defective firearms in a suicidal context. In the first case, a 78-year-old man was found hanged from a tree, with a Lefaucheux revolver lying on the tree. In the right temporal region, there was an entrance wound with a bullet still in place, responsible for a mild cerebral contusion, without bone defect. The main cause of death was hanging. In the second case, a 60-year-old man died at home after shooting himself in the head several times with a 22-long rifle revolver. The autopsy showed 13 entrance wounds on the scalp. Most of the bullets remained along the skull vault. In each of 2 cases, the manner of death, the feasibility of suicidal gesture, and the consequences of a brain injury on the time to the occurrence of incapacity were questioned. These unusual autopsy cases underline how important it is to take into account the defective nature of firearms.

Homicide-Suicide: A Homicidal Asphyxiation Misinterpreted as a Gunshot Wound at the Scene.

Strangulation is commonly associated with certain findings at autopsy, including petechial hemorrhages in the conjunctiva and oral mucosa, contusions or abrasions of the neck, hemorrhage within the anterior and posterior neck musculature, and fractures of the hyoid bone or thyroid cartilage. We present the case of a 68-year-old woman who was found dead in her bedroom, with her husband being found dead in the garage. Her husband had shot himself, and the woman, who was lying partially on her side, had blood coming from her ear that was facing upward and was, at the scene, also believed to have been shot. Autopsy revealed no gunshot wound, but instead florid petechial hemorrhages of the face and conjunctivae, a few contusions of the left and right sides of the neck, a laceration of the lower lip, oral mucosal petechiae, focal hemorrhage in the soft tissue around the hyoid bone, and focal hemorrhages in the left and right sternohyoid muscle. The tongue had multiple contusions. Her cause of death was certified as homicidal asphyxiation, including probable strangulation. Extensive contusions of the tongue are not routine findings with strangulation but occur in about 25% of cases, especially those involving the elderly, and hemorrhage from the ear is rarely reported. This case illustrates uncommon and rare autopsy findings for strangulation, which under the right circumstances, deceived investigators into thinking that a gunshot wound had occurred.