Evaluating the Internal Anatomy of Maxillary Premolars in an Adult Saudi Subpopulation Using 2 Classifications: A CBCT-Based Retrospective Study.

BACKGROUND Understanding the root canal morphology is important for successful endodontic treatment. This retrospective cone-beam computed tomography (CBCT) study aimed to compare the adult maxillary premolars (MP), root, and canal morphology among a Saudi Arabian subpopulation based on Vertucci and Ahmed classifications. MATERIAL AND METHODS Scans of 1336 MP - 656 first premolars (MFP) and 680 second premolars (MSP) - were analyzed for the number of roots, morphology of the canals, and symmetry among them. The data were grouped based on the traditional preestablished Vertucci system and newer instantaneous code-based Ahmed classification. Comparative analysis was done using the chi-square test. RESULTS Two roots were common in MFP with 84.4% of the population, followed by those with 1 root and those with 3 roots. In MSP, single roots were more common. The results were non-significant with P values of 0.859 and 0.471, respectively. Most of these MFP had Type IV Vertucci configuration/²TNB¹P¹ Ahmed et al code (TN-tooth number, B-buccal canal, P-palatal canal). In MSP, Type I Vertucci/¹TN¹ Ahmed et al code was most common. However, the results were not statistically significant for the PM with P values of 0.997 and 0.732, respectively. Sex-based difference among them for the roots and root canals was also non-significant. Symmetry among PM in opposite quadrants was 87.1% in MFP and 90% in MSP. CONCLUSIONS Two roots with Type IV (²TNB¹P¹) and 1 root with Type I (¹TN¹) were most common in MFP and MSP, respectively. Symmetry among opposing PM was high.

Comprehensive Analysis of Mandibular First Molar Root and Canal Morphology in Saudi Patients Using Cone Beam Computed Tomography (CBCT).

BACKGROUND The goal of conventional endodontic therapy is to clean the root canal system thoroughly, restore tooth function, and prevent re-infection. Success depends on understanding root canal morphology, resolving apical periodontitis, and using proper techniques. Studies highlight variations in root canal anatomy, with cone-beam computed tomography (CBCT) being crucial for accurate diagnosis despite its high cost and limited availability. MATERIAL AND METHODS This retrospective study reviewed CBCT images of 1820 (907 male, 913 female) patients aged 18 to 78 years. Analysis included 2081 mandibular first molars for variations in root and canal morphology and right- and left-side symmetry. Inter-orifice distance was measured, along with distance from the cementoenamel junction (CEJ) to the level of canal bifurcation. RESULTS In this study, 96.01% of teeth had 2 roots and 3.89% had 3 roots. The percentages of canal configuration were 77.70% for 3 canals, 21.58% for 4 canals, 0.67% for 2 canals, and 0.05% for 1 canal. The inter-orifice distance was 2.07 mm for 2 canals in 1 root and 2.86 mm for 2 canals in separate distal roots. Distance from the CEJ to canal bifurcation varied significantly between 2 canals within 1 distal root (3.35 mm), 2 canals in separate distal roots (1.60 mm), as well as between distal (3.35 mm) and mesial roots (1.10 mm). CONCLUSIONS In mandibular first molars, only 3.89% have additional distolingual roots. Sex and ethnicity showed no influence on number of roots and canals. Distal canals showed a deeper bifurcation and greater inter-orifice distance than did mesial canals.

Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Relationship between soft tissue dimensions and tomographic radial root position classification system for immediate implant installation.

The aim of this study was to evaluate the relationship between soft tissue dimensions and radial root position (RRP) classification for immediate implant placement on maxillary anterior teeth. Maxillary anterior teeth (n = 420) were analyzed in the radial plane of cone beam computed tomography (CBCT) scans. Each tooth was classified according to its RRP: class I, (IA, IB); class II (IIA, IIB) class III; class IV, and class V. Soft tissue thickness at different landmarks, supracrestal soft tissue height, and crestal bone thickness were measured in CBCT. Keratinized tissue width was clinically measured. Gingival phenotype (thick or thin) was evaluated by transparency of the periodontal probe and at the landmark 2 mm from the gingival margin in CBCT. Class I tooth position accounted for 31.7%, class II for 45%, class III for 13.3%, class IV for 0.5%, and class V for 9.5%. The gingival phenotype was associated with RRP (χ2 test, p < 0.05). Soft tissue dimensions were significantly different over RRP classes (ANOVA and Tukey tests, p < 0.05). Types IA and IIA presented both thick soft and hard tissues. When planning immediate implants in the anterior maxilla, soft tissue dimensions evaluation should be incorporated into RRP classification to increase the accuracy and predictability of treatment outcomes.

Age estimation by pulp canal/root ratio in Yorkshire terrier dogs.

Background: The study of the morphological parameters of teeth on dental radiographic images, especially evaluation of the pulp canal/root ratio (PCRR), has been presented as a reliable method to estimate age both in humans and animals. Evaluating PCRR involves a simple, nondestructive procedure that can be used both in living individuals and in cadavers. There is a scarcity of studies assessing the relationship between PCRR and age in dogs (Canis lupus familiaris). Objective: The aim of this study was to evaluate the relationship between PCRR and age in Yorkshire terrier dogs. Animals and procedures: Dental radiographs of 53 Yorkshire terrier dogs from the database of the Odontovet Veterinary Dentistry Center (Brazil) were analyzed. Using ImageJ software, 3 consecutive measurements of the widths of 2 roots (mesial and distal) and their respective pulp canals were taken at both mandibular molar teeth (left, 309 and right, 409). The PCRR was then calculated using width means. Results: The PCRR decreased with increasing age in both mesial (0.21 ± 0.09 in animals aged < 24 mo, 0.12 ± 0.04 in animals aged between 25 and 96 mo, and 0.09 ± 0.03 in dogs aged > 96 mo) and distal (0.24 ± 0.11, 1.01 ± 0.03, and 0.09 ± 0.03, by the same order) roots. A statistically significant, moderate negative correlation was demonstrated between age and PCRR of the mesial [rs (97) = -0.545; P < 0.001] and distal [rs (98) = -0.578; P < 0.001] roots. Conclusion and clinical relevance: This work contributes to the knowledge of PCRR in dogs and its relationship with age, paving the way for further studies using larger samples in different canine breeds.

Estimation de l'âge par le rapport canal pulpaire/racine chez des chiens de race Yorkshire. Contexte: L'examen des paramètres morphologiques des dents sur des radiographies dentaires, particulièrement l'évaluation du rapport canal pulpaire/racine (PCRR), a été présenté comme une méthode fiable d'estimer l'âge chez les humains et les animaux. L'évaluation du PCRR est faite au moyen d'une procédure simple et non-destructive qui peut être utilisée autant chez les individus vivants que sur des cadavres. Il y a peu d'études évaluant la relation entre le PCRR et l'âge chez les chiens (Canis lupus familiaris). Objectif: L'objectif de la présente étude était d'évaluer la relation entre le PCRR et l'âge chez des chiens de race Yorkshire. Animaux et procédures: Les radiographies dentaires de 53 chiens de race Yorkshire provenant de la base de données du Centre de dentisterie vétérinaire Odontovet (Brésil) ont été analysées. À l'aide du logiciel ImageJ, 3 mesures consécutives de la largeur de 2 racines (mésiale et distale) et de leur canal pulpaire respectif ont été prises au niveau des dents molaires mandibulaires (gauche, 309 et droite, 409). Le PCRR a par la suite été calculé utilisant les moyennes des largeurs. Résultats: Le PCRR diminuait avec une augmentation de l'âge autant pour la racine mésiale (0,21 ± 0,09 chez les animaux âgés de < 24 mo, 0,12 ± 0,04 chez les animaux âgés entre 25 et 96 mo, et 0,09 ± 0,03 chez les chiens de > 96 mo) que pour la racine distale (0,24 ± 0,11, 1,01 ± 0,03, 0,09 ± 0,03, dans le même ordre d'âge). Une différence statistiquement significative, corrélation modérément négative a été mise en évidence entre l'âge et le PCRR pour la racine mésiale [rs (97) = −0,545; P < 0,001] et la racine distale [rs (98) = −0,578; P < 0,001]. Conclusion et pertinence clinique: Cette étude contribue à la connaissance du PCRR chez les chiens et sa relation avec l'âge, ouvrant la voie à des études ultérieures avec un échantillonnage plus grand et différentes races de chien.(Traduit par Dr Serge Messier).

Biometric analysis of furcation area of molar teeth and its relationship with instrumentation.

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

Root canal morphology of anterior permanent teeth in Jordanian population using two classification systems: a cone-beam computed tomography study.

BACKGROUND: Adequate knowledge of root canal morphology and its variation is essential for success of root canal treatment and to overcome treatemnt failure. The aim of this study was to investigate the root and canal morphology of mandibular anterior teeth using 2 classification systems. METHODS: 3342 lower anteriors were evaluated from 557 CBCT scans. The images were examined in sagittal, axial and coronal views using a CS 3D imaging software (V3.10.4, Carestream Dental). Demographic data recorded, the number of roots and canal's morphology were described according to Vertucci and Ahmed classifications. RESULTS: Frequency of Type I configuration was significantly the highest in incisors and canines (76%, N = 2539), followed by Type III (20.6%, N = 687). Type II (1.1%, N = 37), IV (1.1%, N = 37), and V (0.3%, N = 11) were rarely encountered. 0.9% (N = 31) of the teeth could not be classified with the Vertucci System. The frequency of 2 roots (2MA in Ahmed classification) which has no correspondence in the Vertucci classification, was 1.1% (N = 38), it was significantly higher in canines and in females (35 canines and 3 laterals). A moderate correlation in root canal morpology was found between the left and right sides (V > 0.30). 80% (N = 2538) of the teeth did not exhibit any divergence/merging. The bifurcation level occurred mostly in the middle third of the root. CONCLUSIONS: One fourth of anterior teeth had variation from the simple type I canal configuration and therefore requires attention during treatment. The new classification system offers a more accurate and simplified presentation of canal morphology. CLINICAL RELEVANCE: The prevalence and mid root bifurcation of second canal in lower anteriors requires attention to ensure adequate quality root canal treatment without compromising the integrity of teeth.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review.

INTRODUCTION: Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population. METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies. RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 µm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 µm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology. CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Systematic review and meta-analysis of root morphology and canal configuration of permanent premolars using cone-beam computed tomography.

INTRODUCTION: The efficacy of root canal treatment is greatly impacted by a thorough understanding of root canal anatomy. This systematic review and meta-analysis aim to thoroughly investigate the root morphology and canal configuration (RMCC) of permanent premolars (PMs). METHODOLOGY: A comprehensive analysis was conducted following the PRISMA guidelines. Literature exploration was carried out across four electronic databases (PubMed, Embase, Cochrane, and Web of Science). The risk of bias assessment was conducted for the included studies utilizing the Anatomical Quality Assessment (AQUA) tool. Data analysis was performed utilizing SPSS and RevMAN5.3.3. The meta-analysis was applied with a 95% confidence interval to calculate odds ratios (OR). RESULTS: Among the 82 selected studies, 59 studies exhibited potential bias in domain one (objective(s) and subject characteristics), followed by domain three (methodology characterization). The majority of maxillary PM1s had either single root (46.7%) or double roots (51.9%), while three-rooted variants were uncommon (1.4%). Conversely, most other PMs exhibited a single root. In terms of canal configuration, maxillary PM1s predominantly featured double distinct canals (87.2%), with the majority of maxillary PM2s displaying either a single canal (51.4%) or double canals (48.3%). Mandibular PMs were primarily characterized by single canals, accounting for 78.3% of mandibular PM1s and 90.3% of mandibular PM2s. Subgroup analyses revealed higher incidences of single-rooted and single-canalled PMs among Asians compared to Caucasians. Additionally, women exhibited a higher incidence of single-rooted PMs, while men showed a greater frequency of double-rooted PMs. CONCLUSIONS: The comprehensive analysis indicated that maxillary PM1s predominantly possess double roots and double canals, whereas maxillary PM2s and mandibular PMs were primarily characterized by single-rooted with a single canal. Notably, single root and single canal were more prevalent among women and Asian samples.

Micro computed tomography (Micro-CT) characterization of root and root canal morphology of mandibular first premolars: a systematic review and meta-analysis.

INTRODUCTION: Mandibular first premolars are familiar with their varied root canal morphology, causing difficulties and challenges for successful endodontic procedures. This systematic review and meta-analysis aim to study the characterization of root and canal morphology of the first mandibular premolar using micro-computed tomography. METHODOLOGY: The literature search was conducted using electronic web databases like PubMed, Scopus, ScienceDirect and Cochrane with the chosen MeSH key words and data was retrieved until May 2023. Further to perform the statistical analysis, R v 4.3.1 software with "meta", 'metafor" "metaviz" " ggplot2" package was used, and results were represented by odds ratios (OR) and the percentage of forest plots along a 95 per cent confidence interval (CI). RESULTS: The total number of studies meeting the inclusion criteria was 13; these studies were conducted on mandibular first premolar using Micro-CT; the total sample size was 1817. To scan the sample, an X-ray micro-focus CT system (Siemens Inveon CT, Erlangen, Germany) was used in four studies and seven different machines were used in the respective studies. Mimics 10.01 software (Materialize, Leuven, Belgium) and NRecon v.1.6.9 software (Bruker, Kontich, Belgium) were commonly operated. The minimum and maximum voxel size ranges between 11.94 and 50 µm. Vertucci's classification was frequently used (9), while one study applied Ahmed et al. and Vertucci's classification. CONCLUSION: This systematic review provides essential information about the root and canal configurations, radicular grooves, accessory canals, and apical foramina through Micro-CT, aiming to improve the accuracy of endodontic treatment and help practitioners.

Evaluation of the relationship between periodontal bone destruction and mesial root concavity of the maxillary first premolar.

BACKGROUND: The purpose of this study was to investigate the morphology of maxillary first premolar mesial root concavity and to analyse its relation to periodontal bone loss (BL) using cone beam computed tomography (CBCT) and panoramic radiographs. METHODS: The mesial root concavity of maxillary premolar teeth was analysed via CBCT. The sex and age of the patients, starting position and depth of the root concavity, apicocoronal length of the concavity on the crown or root starting from the cementoenamel junction (CEJ), total apicocoronal length of the concavity, amount of bone loss both in CBCT images and panoramic radiographs, location of the furcation, length of the buccal and palatinal roots, and buccopalatinal cervical root width were measured. RESULTS: A total of 610 patients' CBCT images were examined, and 100 were included in the study. The total number of upper premolar teeth was 200. The patients were aged between 18 and 65 years, with a mean age of 45.21 ± 13.13 years. All the teeth in the study presented mesial root concavity (100%, n = 200). The starting point of concavity was mostly on the cervical third of the root (58.5%). The mean depth and buccolingual length measurements were 0.96 mm and 4.32 mm, respectively. Depth was significantly related to the amount of alveolar bone loss (F = 5.834, p = 0.001). The highest average concavity depth was 1.29 mm in the group with 50% bone loss. The data indicated a significant relationship between the location of the furcation and bone loss (X2 = 25.215, p = 0.003). Bone loss exceeded 50% in 100% of patients in whom the furcation was in the cervical third and in only 9.5% of patients in whom the furcation was in the apical third (p = 0.003). CONCLUSIONS: According to the results of this study, the depth of the mesial root concavity and the coronal position of the furcation may increase the amount of alveolar bone loss. Clinicians should be aware of these anatomical factors to ensure accurate treatment planning and successful patient management.

Worldwide Anatomic Characteristics of the Mandibular Canine-A Multicenter Cross-Sectional Study with Meta-Analysis.

INTRODUCTION: This study aimed to examine the global prevalence of root and root canal morphologies in mandibular canines and analyze potential influences of region, ethnicity, sex, and age on the proportion of a second root and root canal configuration. METHODS: Observers from 44 countries screened 13,200 canines using cone-beam computed tomographic exams and gathered data on the percentages of 2 root canal morphologies and 2-rooted configurations (primary outcomes), as well as the root canal configurations (secondary outcome). Demographic factors (ethnicity, sex, and age) were collected for each participant. Primary outcomes were represented as odds ratios and untransformed proportions accompanied by 95% confidence interval (CI) forest plots. Meta-analysis compared subgroups and identified sources of heterogeneity. Intra- and inter-rater tests were conducted. Statistical significance was set at 5%. RESULTS: The worldwide prevalence of a second canal was 7.5% (95% CI, 6.3%-8.7%), ranging from 0.7% in Nigeria to 17.7% in Uruguay. The meta-analysis also revealed significant variations when comparing ethnicity, gender, and age (P < .05). The global prevalence of a second root was 1.9% (95% CI, 1.5%-2.3%), with the highest proportion observed in Spain (6.7%). Caucasian and Indian (south Asian) ethnic groups, females, and older patients exhibited higher proportions of 2 roots (P < .05). Meta-regression excluded side, voxel size, and field of view as sources of heterogeneity (P > .05). CONCLUSIONS: The prevalence of 2 root canals and 2-rooted configurations in the mandibular canine exhibited variations based on geographic location, ethnicity, sex, and age. The global prevalence of 2 root canals and 2-root configuration was 7.5% and 1.9%, respectively.

Clinical relevance of distolingual roots and periodontal status in mandibular first molars: a cross-sectional study employing CBCT analysis. / ä¸‹é¢Œç¬¬ä¸€ç£¨ç‰™è¿œèˆŒæ ¹çš„å­˜åœ¨ä¸Žç‰™å‘¨çŠ¶æ€çš„ä¸´åºŠç›¸å ³æ€§åˆ†æžï¼šä¸€é¡¹é‡‡ç”¨é”¥å½¢å°„æŸç”µè„‘æ–­å±‚æ‰«æåˆ†æžçš„æ¨ªæ–­é¢ç ”ç©¶.

OBJECTIVES: Distolingual root of the permanent mandibular first molar (PMFM-DLR) has been frequently reported, which may complicate the treatment of periodontitis. This study aimed to assess the morphological features of PMFM-DLR and investigate the correlation between the morphological features of PMFM-DLR and periodontal status in patients with Eastern Chinese ethnic background. MATERIALS AND METHODS: A total of 836 cone beam computed tomography (CBCT) images with 1497 mandibular first molars were analyzed to observe the prevalence of PMFM-DLR at the patients and tooth levels in Eastern China. Among them, complete periodontal charts were available for 69 Chinese patients with 103 teeth. Correlation and regression analyses were used to evaluate the correlation between the morphological features of DLR, bone loss, and periodontal clinical parameters, including clinical attachment loss (CAL), probing pocket depth (PPD), gingival recession (GR), and furcation involvement (FI). RESULTS: The patient-level prevalence and tooth-level prevalence of DLR in mandibular first molars were 29.4% and 26.3%, respectively. Multiple linear regression analysis suggested that bone loss at the lingual site and CAL were negatively affected by the angle of separation between distolingual and mesial roots in the transverse section, while they were significantly influenced by age and the angle of separation between distobuccal and mesial roots in the coronal section. CONCLUSIONS: The prevalence of PMFM-DLR in Eastern China was relatively high in our cohort. The morphological features of DLR were correlated with the periodontal status of mandibular first molars. This study provides critical information on the morphological features of DLR for improved diagnosis and treatment options of mandibular molars with DLR.

Retrospective study of the morphology of third maxillary molars among the population of Lower Silesia based on analysis of cone beam computed tomography.

INTRODUCTION: Understanding the anatomy of root canal systems and being aware of their variations is crucial for successful endodontic treatment. Specifically, the intricate and diverse nature of the root anatomy in maxillary third molars poses a significant challenge for dental clinicians. The study analyzed the morphology of the root canal system in maxillary third molars among residents of the Lower Silesia region in Poland using cone beam computed tomography (CBCT). MATERIAL AND METHODS: This retrospective cross-sectional imaging study was conducted at the X-Ray Diagnostics Laboratory of the Academic Dental Polyclinic of Wroclaw Medical University, Poland. The study evaluated 316 CBCT scans and included 196 maxillary third molars. They were obtained from 118 females and 78 males over the age of 18, in the period from January to April 2022 (three consecutive months). The number of roots, root canals, and root canal configurations according to Vertucci's classification were analyzed. RESULTS: Three-rooted maxillary molars were found most often (64.29%), followed by single-rooted (24.49%), two-rooted (7.65%), and four-rooted (3.57%) teeth. Among all the roots examined, Vertucci Type I root canals were the most prevalent. Our research found that single-rooted forms (40 teeth, 33.89% vs. 8 teeth, 10.26%, p = 0.0013) of maxillary third molars were significantly more common in females than in males. However, three-rooted forms (62 teeth, 79.49% vs. 64 teeth, 54.24%, p = 0.0013) of maxillary third molars were significantly more common in males than in females. DISCUSSION: In the Lower Silesia region, the typical maxillary third molar in the Polish population has a three-rooted structure with Vertucci Type I root canal configuration. We noted a sex-dependent correlation in maxillary third molar morphology, with single-rooted forms more prevalent in women and three-rooted forms in men.

Evergrowing incisors of diprotodont marsupials record age and life history.

OBJECTIVE: Tooth growth and wear are commonly used tools for determining the age of mammals. The most speciose order of marsupials, Diprotodontia, is characterised by a pair of procumbent incisors within the lower jaw. This study examines the growth and wear of these incisors to understand their relationship with age and sex. DESIGN: Measurements of mandibular incisor crown and root length were made for two sister species of macropodid (kangaroos and wallabies); Macropus giganteus and Macropus fuliginosus. Histological analysis examined patterns of dentine and cementum deposition within these teeth. Broader generalisability within Diprotodontia was tested using dentally reduced Tarsipes rostratus - a species disparate in body size and incisor function to the studied macropodids. RESULTS: In the macropodid sample it is demonstrated that the hypsodont nature of these incisors makes measurements of their growth (root length) and wear (crown length) accurate indicators of age and sex. Model fitting finds that root growth proceeds according to a logarithmic function across the lifespan, while crown wear follows a pattern of exponential reduction for both macropodid species. Histological results find that secondary dentine deposition and cementum layering are further indicators of age. Incisor measurements are shown to correlate with age in the sample of T. rostratus. CONCLUSIONS: The diprotodontian incisor is a useful tool for examining chronological age and sex, both morphologically and microstructurally. This finding has implications for population ecology, palaeontology and marsupial evolution.

Exploring the sex-associated differences in molars fused roots.

BACKGROUND: Human sexual dimorphism is associated with many biological characteristics, including dental variables. OBJECTIVES: To investigate if molars fused roots present sex-associated differences. METHODS: Panoramic radiographs were used to investigate the frequency and distribution of permanent molars fused roots. Only patients with all first and second permanent molars were included. Third molars were not investigated. Any molar with roots fused apical to the usual furcal position were considered molar fused roots. Comparisons between males and females were performed using chi-square or Fisher's and Mann-Whitney tests and the established alpha was 5% (p<0.05). Sex-differential liability models were also proposed. RESULTS: A total of 84 males and 86 females were included and 1360 molars were analyzed. Among them, 46 (26.06%) present at least one molar with fused root. Second maxillary molars were the most affected teeth. There was an association between sex and molars with fused roots. Females had a 3.4 higher chance to present fused roots than males (OR=3.4, CI 95% 1.6-6.8; p=0.0008). The female: male ratio of molars with fused roots was 2.5:1. The number of molars with fused roots ranged from 1 to 6 per patient, and the mean number of Females presented more molars with fused roots (mean = 1.01; standard deviation = 1.52) than males (mean = 0.31; standard deviation = 0.85) (p<0.05). CONCLUSIONS: Molar fused root of permanent teeth presents sex-associated differences, in which females are more affected than males. Our results support sex-differential liability models for molars fused roots.

Is the assessment of the mandibular molar danger zone affected by field of view and voxel size in cone beam computed tomography examinations?

OBJECTIVE: To verify if assessment of the danger zone (DZ) in the mesial root of mandibular molars is affected by field of view (FOV) and voxel sizes in cone beam computed tomography (CBCT) scans. STUDY DESIGN: Forty mandibular molars were scanned by micro-computed tomography, creating the reference standard. The teeth were then submitted for CBCT scans with FOVs of 10 × 5.5 cm and 5 × 5.5 cm and voxel sizes of 0.4, 0.2, 0.15, and 0.075 mm3. The smallest dentin thickness in the DZ from the mesiobuccal and mesiolingual canals was measured at 2, 4, and 6 mm apical to the root furcation. Descriptive statistics, paired t-tests, and intraclass correlation coefficients were used for statistical analysis with significance established at P < .05. RESULTS: All CBCT measurements overestimated the DZ dentin thickness (P < .001) compared to the reference standard. The greatest overestimation occurred in the 5 × 5.5 cm FOV with 0.4 mm3 voxels (P = .007). Dentin thickness measured with the 5 × 5.5 cm FOV and 0.075 mm3 voxels was significantly smaller and produced the best ICC value with the reference standard (0.936). CONCLUSIONS: CBCT overestimates the dentin thickness of the DZ regardless of FOV and voxel sizes. The 5 × 5.5 cm FOV showed the best performance with the 0.075 mm3 voxel size, but it performed poorly with 0.4 mm3 voxels.

Distolingual root prevalence in mandibular first molar and complex root canal morphology in incisors: a CBCT analysis in Indian population.

Cone-beam computed tomography was used to understand the possible correlation between the prevalence of distolingual root (DLR) in permanent mandibular first molars (MFMs) and the associated complicated mandibular incisor's root canal morphology (MIs) in an Indian population. A total of 400 scans were evaluated for MFMs and MIs. The prevalence of DLRs and root canal anatomy of MIs were assessed based on Vertucci's classification, and then the sample were grouped according to age, sex and side. Statistical analysis was used to evaluate the possible correlation between the presence of DLRs in the first molar and root canal morphology of incisors. Chi square test was used to evaluate the correlation between the root canal configurations of MIs with the existence of DLRs in MFMs. There was no statistically significant difference between sexes or ages for the prevalence of DLRs in the first molars (p > 0.05), which was 6.62%, with the right side having a greater frequency of DLRs (7.8%) than the left (5.5%). Vertucci Type I canal configuration was most common for the mandibular central (66.75%) and lateral incisors (58.62%). Vertucci Type III was the most common complicated canal morphology, followed by Types V, II, and IV for MIs, with no statistically significant difference in the studied sample's age and sex. (p < 0.05). No association was observed between the presence of DLRs in first molars and complicated root canal configurations in MIs. Taken together, the possibility of complicated root canal configuration in MIs was lesser in the presence of DLRs in MFMs among the Indian population.

Morphological study of distal furcation in mandibular first molars based on cone beam computed tomography images in Beijing population.

OBJECTIVES: This retrospective study explored the incidence of independent distal-lingual root (DLR) in mandibular first molars and the morphologic features of distal furcations through cone beam computed tomography (CBCT) in Beijing population. METHODS: A total of 401 CBCT images of both mandibular first molars existed were included. The sex of the patients, the incidence of DLR, the distal root trunk length (DRT), the locations of distal furcation entrance (DFE), and the separation angle of distal furcation (ADF) were recorded. RESULTS: The incidence rates of DLR were 33.2% on the subject level and 26.8% on the tooth level. The incidence of DLR was not different between genders but was higher on the right sides. The DRT values were 4.15 mm±1.02 mm. The ADF was 65.56°±11.56°. The DFE was located lingually, and 97.2% DFE was located more apically than buccal/lingual furcations. CONCLUSIONS: A high incidence of DLR was found in the Beijing population. The DRT was longer than buccal and lingual sites. The DFE was located lingually with a wide separation. Understanding the morphological features of distal furcation can help clinicians to make proper treatment plans.

Pericervical Dentin Metrics in Mandibular First Molars Determined with Digital Periapical Radiography and Cone-beam Computed Tomography.

INTRODUCTION: Pericervical root dentin is decisive for the long-term mechanical integrity of root-filled teeth. Current treatment protocol does not include a customized step to determine the pretreatment residual pericervical root dentin. OBJECTIVE: To determine and compare the residual root dentin and canal width using digital periapical radiography (DPR) and cone-beam computed tomography (CBCT) at the apical limit of the pericervical area (PCA) in mandibular first molars. METHODS: DPR and CBCT images of 60 patients with age between 22 and 76 years were used to determine (a) the mesiodistal widths of the root canal (pericervical dimensions [PCL]-C) and the root (PCL-R) of mandibular first molars at the apical limit of the PCA and (b) the intracanal distance from the apical limit of the PCA to the radiographic apex (intracanal distance [ICD]). The correlation between the PCL and ICD measurements obtained from DPR and CBCT were evaluated. RESULTS: Values between 0.10-0.80 mm and 0.00-1.10 mm were obtained for PCL-C using DPR and CBCT respectively (95% CI). The PCL values between 0.90-2.30 mm and 0.00-2.30 mm were obtained from DPR and CBCT respectively (95% CI). The ICD ranged between 4.6-12.3 mm in DPR and 4.40-12.0 mm in CBCT (95% CI). The comparative analysis showed differences from -0.9 to 0.5 mms for PCL and -2.00 to 1.5 mms for ICD between DPR and CBCT techniques respectively. CONCLUSION: The PCL and ICD determined from DPR and CBCT provided the pericervical dentin metrics that could be utilized clinically as a guideline for decision-making in endodontic treatment.