Acoustic detection of a mutation-specific Ligase Chain Reaction based on liposome amplification.

Single nucleotide variants (SNVs) play a crucial role in understanding genetic diseases, cancer development, and personalized medicine. However, existing ligase-based amplification and detection techniques, such as Rolling Circle Amplification and Ligase Detection Reaction, suffer from low efficiency and difficulties in product detection. To address these limitations, we propose a novel approach that combines Ligase Chain Reaction (LCR) with acoustic detection using highly dissipative liposomes. In our study, we are using LCR combined with biotin- and cholesterol-tagged primers to produce amplicons also modified at each end with a biotin and cholesterol molecule. We then apply the LCR mix without any purification directly on a neutravidin modified QCM device Au-surface, where the produced amplicons can bind specifically through the biotin end. To improve sensitivity, we finally introduce liposomes as signal enhancers. For demonstration, we used the detection of the BRAF V600E point mutation versus the wild-type allele, achieving an impressive detection limit of 220 aM of the mutant target in the presence of the same amount of the wild type. Finally, we combined the assay with a microfluidic fluidized bed DNA extraction technology, offering the potential for semi-automated detection of SNVs in patients' crude samples. Overall, our LCR/acoustic method outperforms other LCR-based approaches and surface ligation biosensing techniques in terms of detection efficiency and time. It effectively overcomes challenges related to DNA detection, making it applicable in diverse fields, including genetic disease and pathogen detection.

Integration of the Ligase Chain Reaction with the CRISPR-Cas12a System for Homogeneous, Ultrasensitive, and Visual Detection of microRNA.

The ligase chain reaction (LCR), as a classic nucleic acid amplification technique, is popular in the detection of DNA and RNA due to its simplicity, powerfulness, and high specificity. However, homogeneous and ultrasensitive LCR detection is still quite challenging. Herein, we integrate the LCR with a CRISPR-Cas12a system to greatly promote the application of the LCR in a homogeneous fashion. By employing microRNA as the model target, we design LCR probes with specific protospacer adjacent motif sequences and the guide RNA. Then, the LCR is initiated by target microRNA, and the LCR products specifically bind to the guide RNA to activate the Cas12a system, triggering secondary signal amplification to achieve ultrasensitive detection of microRNA without separation steps. Moreover, by virtue of a cationic conjugated polymer, microRNA can not only be visually detected by naked eyes but also be accurately quantified based on RGB ratio analysis of images with no need of sophisticated instruments. The method can quantify microRNA up to 4 orders of magnitude, and the determination limit is 0.4 aM, which is better than those of other reported studies using CRISPR-Cas12a and can be compared with that of the reverse-transcription polymerase chain reaction. This study demonstrates that the CRISPR-Cas12a system can greatly expand the application of the LCR for the homogeneous, ultrasensitive, and visual detection of microRNA, showing great potential in efficient nucleic acid detection and in vitro diagnosis.

Integration of magnetic separation and real-time ligation chain reaction for detection of uracil-DNA glycosylase.

Uracil-DNA glycosylase (UDG) is a protein enzyme that initiates the base excision repair pathway for maintaining genome stability. Sensitive detection of UDG activity is important in the study of many biochemical processes and clinical applications. Here, a method for detecting UDG is proposed by integrating magnetic separation and real-time ligation chain reaction (LCR). First, a DNA substrate containing uracil base is designed to be conjugated to the magnetic beads. By introducing a DNA complementary to the DNA substrate, the uracil base is recognized and removed by UDG to form an apurinic/apyrimidinic (AP) site. The DNA substrate is then cut off from the AP site by endonuclease IV, releasing a single-strand DNA (ssDNA). After magnetic separation, the ssDNA is retained in the supernatant and then detected by real-time LCR. The linear range of the method is 5 × 10-4 to 5 U/mL with four orders of magnitude, and the detection limit is 2.7 × 10-4 U/mL. In the assay, ssDNA template obtained through magnetic separation can prevent other DNA from affecting the subsequent LCR amplification reaction, which provides a simple, sensitive, specific, and universal way to detect UDG and other repair enzymes. Furthermore, the real-time LCR enables the amplification reaction and fluorescence detection simultaneously, which simplifies the operation, avoids post-contamination, and widens the dynamic range. Therefore, the integration of magnetic separation and real-time LCR opens a new avenue for the detection of UDG and other DNA repair enzymes.

Ligation-mediated PCR with a back-to-back adapter reduces amplification bias resulting from variations in GC content.

Ligation-mediated polymerase chain reaction (LM-PCR) is a common technique for amplification of a pool of DNA fragments. Here, a double-stranded oligonucleotide consisting of two primer sequences in back-to-back orientation was designed as an adapter for LM-PCR. When DNA fragments were ligated with this adapter, the fragments were sandwiched between two adapters in random orientations. In the ensuing PCR, ligation products linked at each end to an opposite side of the adapter, i.e. to a distinct primer sequence, were preferentially amplified compared with products linked at each end to an identical primer sequence. The use of this adapter in LM-PCR reduced the impairment of PCR by substrate DNA with a high GC content, compared with the use of traditional LM-PCR adapters. This result suggested that our method has the potential to contribute to reduction of the amplification bias that is caused by an intrinsic property of the sequence context in substrate DNA. A DNA preparation obtained from a chromatin immunoprecipitation assay using pulldown of a specific form of histone H3 was successfully amplified using the modified LM-PCR, and the amplified products could be used as probes in a fluorescence in situ hybridization analysis.

A copy number variation genotyping method for aneuploidy detection in spontaneous abortion specimens.

OBJECTIVE: Chromosomal abnormalities such as aneuploidy have been shown to be responsible for causing spontaneous abortion. Genetic evaluation of abortions is currently underperformed. Screening for aneuploidy in the products of conception can help determine the etiology. We designed a high-throughput ligation-dependent probe amplification (HLPA) assay to examine aneuploidy of 24 chromosomes in miscarriage tissues and aimed to validate the performance of this technique. METHODS: We carried out aneuploidy screening in 98 fetal tissue samples collected from female subjects with singleton pregnancies who experienced spontaneous abortion. The mean maternal age was 31.6 years (range: 24-43), and the mean gestational age was 10.2 weeks (range: 4.6-14.1). HLPA was performed in parallel with array comparative genomic hybridization, which is the gold standard for aneuploidy detection in clinical practices. The results from the two platforms were compared. RESULTS: Forty-nine out of ninety-eight samples were found to be aneuploid. HLPA showed concordance with array comparative genomic hybridization in diagnosing aneuploidy. CONCLUSION: High-throughput ligation-dependent probe amplification is a rapid and accurate method for aneuploidy detection. It can be used as a cost-effective screening procedure in clinical spontaneous abortions. © 2016 John Wiley & Sons, Ltd.

[The applications of thermostable ligase chain reaction in facilitating DNA recombination].

The traditional Type Ⅱ restriction enzyme-based method is restricted by the purification steps, and therefore, cannot be applied to specific DNA assembly in chaotic system. To solve this problem, Thermostable Ligase Chain Reaction (TLCR) was introduced in the process of DNA assembly and capture. This technique combines the feature of thermostable DNA ligase and sequence specific oligo ligation template, "Helper", to achieve specific assembly of target fragments and exponential increase of products in multiple thermocyclings. Two plasmid construction experiments were carried out in order to test the feasibility and practical performance of TLCR. One was that, TLCR was used to specifically capture a 1.5 kb fragment into vector from an unpurified chaotic system which contained 7 different sizes of fragments. The results showed that the capturing accuracy was around 80%, which proved the feasibility and accuracy of using TLCR to specific assembly of DNA fragments in a complicated mixed system. In the other experiment, TLCR was used to capture two fragments (total length was 27 kb) from Hind Ⅲ digestion of Lambda genome into vector by order. The results also showed an accuracy of around 80%. As demonstrated in the results, TLCR can simplify the process of DNA recombination experiments and is suitable for the assembly of multiple and large DNA fragments. This technique can provide convenience to biological experiments.

Highly sensitive and specific multiplexed microRNA quantification using size-coded ligation chain reaction.

As important regulators of gene expression, microRNAs (miRNAs) are emerging as novel biomarkers with powerful predictive value in diagnosis and prognosis for several diseases, especially for cancers. There is a great demand for flexible multiplexed miRNA quantification methods that can quantify very low levels of miRNA targets with high specificity. For further analysis of miRNA signatures in biological samples, we describe here a highly sensitive and specific method to detect multiple miRNAs simultaneously in total RNA. First, we rationally design one of the DNA probes modified with two ribonucleotides, which can greatly improve the ligation efficiency of DNA probes templated by miRNAs. With the modified DNA probes, the ligation chain reaction (LCR) can be well applied to miRNA detection and as low as 0.2 fM miRNA can be accurately determined. High specificity to clearly discriminate a single nucleotide difference among miRNA sequences can also be achieved. By simply coding the DNA probes with different length of oligo (dA) for different miRNA targets, multiple miRNAs can be simultaneously detected in one LCR reaction. In our proof of principle work, we detect three miRNAs: let-7a, mir-92a, and mir-143, which can also be simultaneously detected in as small as 2 ng of total RNA sample.

Assembly of ligation chain reaction and DNA triangular prism for miRNA diagnostics.

Controllable assembly of DNA nanostructure provides a powerful way for quantitative analysis of various targets including nucleic acid molecules. In this study, we have designed detachable DNA nanostructures at electrochemical sensing interface and constructed a ligation chain reaction (LCR) strategy for amplified detection of miRNA. A three-dimensional DNA triangular prism nanostructure is fabricated to provide suitable molecule recognition environment, which can be further regenerated for additional tests via convenient pH adjustment. Target triggered LCR is highly efficient and specific towards target miRNA. Under optimal experimental conditions, this approach enables ultrasensitive exploration in a wide linear range with a single-base resolution. Moreover, it shows excellent performances for the analysis of cell samples and clinical serum samples.

Single quantum dot analysis enables multiplexed point mutation detection by gap ligase chain reaction.

Gene point mutations present important biomarkers for genetic diseases. However, existing point mutation detection methods suffer from low sensitivity, specificity, and a tedious assay processes. In this report, an assay technology is proposed which combines the outstanding specificity of gap ligase chain reaction (Gap-LCR), the high sensitivity of single-molecule coincidence detection, and the superior optical properties of quantum dots (QDs) for multiplexed detection of point mutations in genomic DNA. Mutant-specific ligation products are generated by Gap-LCR and subsequently captured by QDs to form DNA-QD nanocomplexes that are detected by single-molecule spectroscopy (SMS) through multi-color fluorescence burst coincidence analysis, allowing for multiplexed mutation detection in a separation-free format. The proposed assay is capable of detecting zeptomoles of KRAS codon 12 mutation variants with near 100% specificity. Its high sensitivity allows direct detection of KRAS mutation in crude genomic DNA without PCR pre-amplification.

Simultaneous detection of 19 K-ras mutations by free-solution conjugate electrophoresis of ligase detection reaction products on glass microchips.

We demonstrate here the power and flexibility of free-solution conjugate electrophoresis (FSCE) as a method of separating DNA fragments by electrophoresis with no sieving polymer network. Previous work introduced the coupling of FSCE with ligase detection reaction (LDR) to detect point mutations, even at low abundance compared to the wild-type DNA. Here, four large drag-tags are used to achieve free-solution electrophoretic separation of 19 LDR products ranging in size from 42 to 66 nt that correspond to mutations in the K-ras oncogene. LDR-FSCE enabled electrophoretic resolution of these 19 LDR-FSCE products by CE in 13.5 min (E = 310 V/cm) and by microchip electrophoresis in 140 s (E = 350 V/cm). The power of FSCE is demonstrated in the unique characteristic of free-solution separations where the separation resolution is constant no matter the electric field strength. By microchip electrophoresis, the electric field was increased to the maximum of the power supply (E = 700 V/cm), and the 19 LDR-FSCE products were separated in less than 70 s with almost identical resolution to the separation at E = 350 V/cm. These results will aid the goal of screening K-ras mutations on integrated "sample-in/answer-out" devices with amplification, LDR, and detection all on one platform.

Rapid, isothermal DNA self-replication induced by a destabilizing lesion.

You spin me round: Using a destabilizing abasic site and high concentration of ligase, rapid DNA self-replication in an isothermal ligase chain reaction (LCR) was produced. Both destabilization and rapid ligation are essential for proper LCR replication. This method also provides insight into prebiotic nucleotide replication and is a potential amplification method for biodiagnostics.

Patch oligodeoxynucleotide synthesis (POS): a novel method for synthesis of long DNA sequences and full-length genes.

Synthesis of long DNA fragments is often associated with mutations and requires multiple DNA manipulation steps. A novel DNA synthesis method, referred to as patch oligodeoxynucleotide synthesis (POS) to assembly long DNA fragments is presented here. This method involves connection of two types of oligodeoxynucleotides: long constructional oligonucleotides (COs) and short patch oligonucleotides (POs). Long COs were connected by a ligase with the aid of POs, which were complementary to both adjacent COs to help remove secondary structures during assembly. The partial double-stranded DNA template that was formed was then amplified by PCR. Accordingly, we synthesized SV40 polyadenylation signal sequences (187 bp), a codon-optimized yellow fluorescent protein gene (678 bp), and Rattus norvegicus catenin ß1 (2,352 bp). This presented method can be broadly applied to synthesize DNA fragments of varying lengths with great convenience.

Application of MLPA assay to characterize unsolved α-globin gene rearrangements.

α-thalassemia belongs to those inherited diseases in which large genomic deletions/duplications represent a significant proportion of causative mutations. Until recently, large α-globin gene cluster rearrangements have been mainly detected by gap-PCR and Southern blotting, methods that have significant drawbacks. We tested the recently developed multiplex ligation-dependent probe amplification (MLPA) assay for deletional screening of the α-globin gene cluster in a cohort of 25 individuals suspected of having α-globin alteration(s), in which no or doubtful mutations had been found using conventional methods. In 13 out of 18 α-thalassemia carriers and in all 5 patients with HbH we found the causative α-globin defects. In 2 thalassemia intermedia patients, carriers of heterozygous ß-globin mutations, the co-inheritance of homozygous α-genes triplication was detected. MLPA results were subsequently confirmed by real-time PCR. This study shows that MLPA can effectively identify different and unknown types of α-globin gene rearrangements, to allow characterizing previously unsolved α-thalassemia genotypes.

Multiplexed, ligation-dependent probe amplification for rapid and inexpensive HLA-DQB1 allelotyping.

Many effective options exist to accurately type DNA for human leukocyte antigen (HLA) alleles. However, most of the existing methods are excessively costly in terms of overall monetary costs, DNA requirements, and proprietary software. We present a novel assay capable of resolving heterozygous HLA-DQB1 allelotypes at two digits, with even greater specificity for the HLA-DQB1*06 allele family, by using the multiplexed ligation-dependent probe amplification technology. This assay provides more specific allele data than genome-wide analysis and is more affordable than sequencing, making it a useful intermediate for researchers seeking to accurately allelotype human DNA samples.

Nucleotide polymorphism-based single-tube test for robust molecular identification of all currently described Brucella species.

Among the numerous molecular methods described during the last 20 years to identify Brucella, multiplexed amplification methods offer the cheapest and simplest technical solution for molecular identification. However, one disadvantage of such methods is their need to undergo technical revalidation each time a new marker is added to the system. Moreover, polymorphic markers cannot be assessed at the single-nucleotide level in these assays. Since new Brucella species are continuously being described, open methodologies able to accommodate new markers while preserving all other system parameters have an obvious advantage. We present a ligase chain reaction (LCR)-based method that simultaneously assesses multiple genetic markers at the single-nucleotide level. Most of the selected markers originate from a multilocus sequence typing (MLST) database that has been extensively validated on hundreds of different Brucella strains. When assayed on both reference and field strains, the method yields characteristic capillary electrophoresis profiles for each of the 10 Brucella species described to date and displays discriminatory potential below the species level for some. Since the LCR methodology is insensitive to interference resulting from the use of multiple oligonucleotides in a single mixture, the way is open for smooth future updates of the proposed system. Such updates are inevitable, given the pending description of new Brucella species.

Pyrococcus furiosus Argonaute coupled with modified ligase chain reaction for detection of SARS-CoV-2 and HPV.

Infectious diseases caused by viruses such as SARS-CoV-2 and HPV have greatly endangered human health. The nucleic acid detection is essential for the early diagnosis of diseases. Here, we propose a method called PLCR (PfAgo coupled with modified Ligase Chain Reaction for nucleic acid detection) which utilizes PfAgo to only use DNA guides longer than 14-mer to specifically cleave DNA and LCR to precisely distinguish single-base mismatch. PLCR can detect DNA or RNA without PCR at attomolar sensitivities, distinguish single base mutation between the genome of wild type SARS-CoV-2 and its mutant spike D614G, effectively distinguish the novel coronavirus from other coronaviruses and finally achieve multiplexed detection in 70 min. Additionally, LCR products can be directly used as DNA guides without additional input guides to simplify primer design. With desirable sensitivity, specificity and simplicity, the method can be extended for detecting other pathogenic microorganisms.

Association between detection of HIV-1 DNA resistance mutations by a sensitive assay at initiation of antiretroviral therapy and virologic failure.

BACKGROUND: Antiretroviral therapy (ART) has become more available throughout the developing world during the past 5 years. The World Health Organization recommends nonnucleoside reverse-transcriptase inhibitor-based regimens as initial ART. However, their efficacy may be compromised by resistance mutations selected by single-dose nevirapine (sdNVP) used to prevent mother-to-child transmission of human immunodeficiency virus (HIV)-1. There is no simple and efficient method to detect such mutations at the initiation of ART. METHODS: One hundred eighty-one women who were participating in a clinical trial to prevent mother-to-child transmission and who started NVP-ART after they had received sdNVP or a placebo were included in the study. One hundred copies of each patient's HIV-1 DNA were tested for NVP-resistance point-mutations (K103N, Y181C, and G190A) with a sensitive oligonucleotide ligation assay that was able to detect mutants even at low concentrations (> or = 5% of the viral population). Virologic failure was defined as confirmed plasma HIV-1 RNA >50 copies/mL after 6 to 18 months of NVP-ART. RESULTS: At initiation of NVP-ART, resistance mutations were identified in 38 (26%) of 148 participants given sdNVP (K103N in 19 [13%], Y181C in 8 [5%], G190A in 28 [19%], and > or = 2 mutations in 15 [10%]), at a median 9.3 months after receipt of sdNVP. The risk of virologic failure was 0.62 (95% confidence interval [CI], 0.46-0.77) in women with > or = 1% resistance mutation, compared with a risk of 0.25 (95% CI, 0.17-0.35) in those without detectable resistance mutations (P < .001). Failure was independently associated with resistance, an interval of <6 months between sdNVP and NVP-ART initiation, and a viral load higher than the median at NVP-ART initiation. CONCLUSIONS: Access to simple and inexpensive assays to detect low concentrations of NVP-resistant HIV-1 DNA before the initiation of ART could help improve the outcome of first-line ART.

Multiplex single nucleotide polymorphism genotyping utilizing ligase detection reaction coupled surface enhanced Raman spectroscopy.

Single nucleotide polymorphisms (SNPs) are one of the key diagnostic markers for genetic disease, cancer progression, and pharmcogenomics. The ligase detection reaction (LDR) is an excellent method to identify SNPs, combining low detection limits and high specificity. We present the first multiplex LDR-surface enhanced Raman spectroscopy (SERS) SNP genotyping scheme. The platform has the advantage in that the diagnostic peaks of Raman are more distinct than fluorescence, and in theory, a clinically significant number of markers can be multiplexed in a single sample using different SERS reporters. Here we report LDR-SERS multiplex SNP genotyping of K-Ras oncogene alleles at 10 pM detection levels, optimization of DNA labeling as well as Raman conditions, and the linear correlation of diagnostic peak intensity to SNP target concentration in heterozygous samples. Genomic DNA from typed cells lines was obtained and scored for the K-Ras genotype. These advances are significant as we have further developed our new SNP genotyping platform and have demonstrated the ability to correlate genotype ratios directly to diagnostic Raman peak signal intensity.

Detection of HIV-1 drug resistance in women following administration of a single dose of nevirapine: comparison of plasma RNA to cellular DNA by consensus sequencing and by oligonucleotide ligation assay.

A single dose of nevirapine (sdNVP) to prevent mother-to-child transmission of HIV-1 increases the risk of failure of subsequent NVP-containing antiretroviral therapy (ART), especially when initiated within 6 months of sdNVP administration, emphasizing the importance of understanding the decay of nevirapine-resistant mutants. Nevirapine-resistant HIV-1 genotypes (with the mutations K103N, Y181C, and/or G190A) from 21 women were evaluated 10 days and 6 weeks after sdNVP administration and at the initiation of ART. Resistance was assayed by consensus sequencing and by a more sensitive assay (oligonucleotide ligation assay [OLA]) using plasma-derived HIV-1 RNA and cell-associated HIV-1 DNA. OLA detected nevirapine resistance in more specimens than consensus sequencing did (63% versus 33%, P<0.01). When resistance was detected only by OLA (n=45), the median mutant concentration was 18%, compared to 61% when detected by both sequencing and OLA (n=51) (P<0.0001). The proportion of women whose nevirapine resistance was detected by OLA 10 days after sdNVP administration was higher when we tested their HIV-1 RNA (95%) than when we tested their HIV-1 DNA (88%), whereas at 6 weeks after sdNVP therapy, the proportion was greater with DNA (85%) than with RNA (67%) and remained higher with DNA (33%) than with RNA (11%) at the initiation of antiretroviral treatment (median, 45 weeks after sdNVP therapy). Fourteen women started NVP-ART more than 6 months after sdNVP therapy; resistance was detected by OLA in 14% of the women but only in their DNA. HIV-1 resistance to NVP following sdNVP therapy persists longer in cellular DNA than in plasma RNA, as determined by a sensitive assay using sufficient copies of virus, suggesting that DNA may be superior to RNA for detecting resistance at the initiation of ART.

Rapid detection of TEM, SHV and CTX-M extended-spectrum beta-lactamases in Enterobacteriaceae using ligation-mediated amplification with microarray analysis.

OBJECTIVES: Fast and adequate detection of extended-spectrum beta-lactamases (ESBLs) is crucial for infection control measures and the choice of antimicrobial therapy. The aim of this study was to develop and evaluate a novel ESBL assay using ligation-mediated amplification combined with microarray analysis to detect the most prevalent ESBLs in Enterobacteriaceae: TEM, SHV and CTX-M. METHODS: Analysis of the Lahey database revealed that the vast majority of TEM and SHV ESBLs differ from non-ESBL variants in three amino acid positions. TEM ESBLs have at least one of the following amino acid substitutions: R164S/H/C, G238D/N/S and E104K. In SHV ESBLs, one or more of the following substitutions is observed: D179A/N/G, G238S/A and E240K. Oligonucleotide probes were designed to detect these substitutions, covering 95% of ESBL TEM variants and 77% of ESBL SHV variants. In addition, probes were designed to distinguish between CTX-M groups 1, 2, 9 and 8/25. For evaluation of the assay, 212 Enterobacteriaceae isolates with various beta-lactamases were included (n = 106 ESBL positive). RESULTS: The sensitivity of the microarray was 101/106 (95%; 95% CI 89%-98%), and the specificity 100% (95% CI 97%-100%) using molecular characterization of ESBLs by PCR and sequencing as reference. Assay performance time was 8 h for 36 isolates. CONCLUSIONS: This novel commercially available DNA microarray system may offer an attractive option for rapid and accurate detection of CTX-M, TEM and SHV ESBL genes in Enterobacteriaceae in the clinical laboratory.