In situ production of low-modulus Ti-Nb alloys by selective laser melting and their functional assessment toward orthopedic applications.
J Mater Chem B
; 12(24): 5982-5993, 2024 Jun 19.
Article
em En
| MEDLINE
| ID: mdl-38809161
ABSTRACT
This work aimed to manufacture Ti-28.5Nb and Ti-40.0Nb (wt%) alloys in situ via selective laser melting (SLM) from Ti and Nb elemental powders. X-ray diffraction analysis revealed complete ß-phase (cubic) in Ti-40.0Nb and a mixture of (α'' orthorhombic + ß cubic) phases in Ti-28.5Nb were formed, whereas few of the Nb particles remained only partially fused during manufacturing. The fraction of partially melted Nb particles was determined as â¼2 and â¼18% in Ti-28.5Nb and Ti-40Nb, respectively. Mechanical characterization revealed higher hardness and more strength in Ti-28.5Nb than in Ti-40.0Nb due to the presence of the α'' phase in the former. Tribocorrosion tests reveal a significantly better wear-corrosion resistance for Ti-40.0Nb, as determined from a lower total volume loss in Ti-40.0Nb (â¼2 × 10-4 mm-3) than in Ti-28.5Nb (â¼13 × 10-2 mm-3). The lower volume loss and better corrosion resistance behavior are attributed to the ß phase, which was dominant in Ti-40.0Nb. Cell studies reveal no toxicity for up to 7 days. Both the alloys were better at supporting cell proliferation than wrought Ti6Al4V. This study presents a route to preparing Ti-Nb alloys in situ by SLM that are promising candidates for biomedical applications.
Texto completo:
1
Bases de dados:
MEDLINE
Assunto principal:
Titânio
/
Ligas
/
Lasers
/
Nióbio
Limite:
Animals
/
Humans
Idioma:
En
Revista:
J Mater Chem B
Ano de publicação:
2024
Tipo de documento:
Article
País de afiliação:
Índia