Determination of inorganic ions and carbohydrates in cardioplegia and nephroplegia solutions by ion chromatography.

In this study, methods for analyzing inorganic ions and carbohydrates in cardioplegia and nephroplegia solutions were developed and validated using ion chromatography with both conductivity and pulsed amperometric detection. The inorganic ions such as sodium, potassium, and calcium were separated by a cation-exchange column with 27 mM methanesulfonic acid as mobile phase at 0.5 mL/min. The anion (chloride) and carbohydrates (mannitol and glucose) were analyzed by an anion-exchange column using a mobile phase of 20 mM sodium hydroxide at 1.0 mL/min. The methods showed a high sensitivity for all analytes, with quantification limits from 0.0002 to 0.06 mg/L. Good linearities between the peak areas and concentrations were found for all analytes within the selected concentration range (R2  > 0.999). Relative standard deviation values for repeatability and interday precision were 0.1%-1.0% and 0.7%-1.6%, respectively. The accuracy was validated by determining the percentage recovery, which was between 98.0% and 101.3% for all analytes, indicating good accuracy of the methods. The robustness was verified by using an experimental design. Finally, real samples were analyzed to determine the content of the analytes. All assay values were between 96.8% and 102.5%.

Quantification of amino acids secreted by yeast cells by hydrophilic interaction liquid chromatography-tandem mass spectrometry.

Monitoring the levels of amino acids (AAs) in biological cell cultures provides key information to understand the regulation of cell growth and metabolism. Saccharomyces cerevisiae can naturally excrete AAs, making accurate detection and determination of amino acid levels within the cultivation medium pivotal for gaining insights into this still poorly known process. Given that most AAs lack ultraviolet (UV) chromophores or fluorophores necessary for UV and fluorescence detection, derivatization is commonly utilized to enhance amino acid detectability via UV absorption. Unfortunately, this can lead to drawbacks such as derivative instability, labor intensiveness, and poor reproducibility. Hence, this study aimed to develop an accurate and stable hydrophilic interaction liquid chromatography-tandem mass spectrometry analytical method for the separation of all 20 AAs within a short 17-min run time. The method provides satisfactory linearity and sensitivity for all analytes. The method has been validated for intra- and inter-day precision, accuracy, recovery, matrix effect, and stability. It has been successfully applied to quantify 20 AAs in samples of yeast cultivation medium. This endeavor seeks to enhance our comprehension of amino acid profiles in the context of cell growth and metabolism within yeast cultivation media.

Development and Validation of Liquid Chromatographic Method for Fast Determination of Lincomycin, Polymyxin and Vancomycin in Preservation Solution for Transplants.

In this study, a liquid chromatographic method was developed for the fast determination of lincomycin, polymyxin and vancomycin in a preservation solution for transplants. A Kinetex EVO C18 (150 × 4.6 mm, 2.6 µm) column was utilized at 45 °C. Gradient elution was applied using a mixture of mobile phases A and B, both including 30 mM phosphate buffer at pH 2.0 and acetonitrile, at a ratio of 95:5 (v/v) for A and 50:50 (v/v) for B. A flow rate of 1.0 mL/min, an injection volume of 20 µL and UV detection at 210 nm were used. A degradation study treating the three antibiotics with 0.5 M hydrochloric acid, 0.5 M sodium hydroxide and 3% H2O2 indicated that the developed method was selective toward lincomycin, polymyxin, vancomycin and their degradation products. Other ingredients of the preservation solution, like those from the cell culture medium, did not interfere. The method was validated with good sensitivity, linearity, precision and accuracy. Furthermore, lincomycin, polymyxin and vancomycin were found to be stable in this preservation solution for 4 weeks when stored at -20 °C.

Overview of chromatographic and electrophoretic methods for the determination of branched-chain amino acids.

The significance of branched-chain amino acids in diseases was clearly shown over the years. This review aims to describe the available techniques for their analytical determination. The article provides examples of the use of various analytical methods. The methods are divided into two categories: derivatization and non-derivatization approaches. Separation is achieved through different chromatography or capillary electrophoresis techniques and can be combined with different detectors such as flame ionization, ultraviolet, fluorescence, and mass spectrometry. It compares the application of various derivatization reagents or detection as such for different detectors.

Highly sensitive liquid chromatographic method combined with online ion suppression to remove interfering anions and mass spectrometry for impurity profiling of paromomycin sulfate.

A previously developed high-performance liquid chromatography method combined with pulsed amperometric detection allowed to separate many impurities of paromomycin. However, due to the presence of ion pairing agents and sodium hydroxide in the mobile phase, direct coupling to mass spectrometry for the identification of the chemical structures of the impurities was not an option. Indeed, ion suppression was encountered by trifluoroacetic acid and pentafluoroproponic acid in the mobile phase. A cation self-regenerating suppressor, which was originally designed for increasing analyte conductivity of ammonia and amines analysis in ion chromatography, was coupled between the liquid chromatography and ion trap-time of flight-mass spectrometry and almost all trifluoroacetic acid and pentafluoroproponic acid in the mobile phase was removed. The limit of detection of paromomycin in this integrated system improved significantly to 20 ng/ml (0.4 ng). The chemical structures of 19 impurities were elucidated and seven impurities were reported for the first time.

Multidimensional Chromatographic Fingerprinting Combined with Chemometrics for the Identification of Regulated Plants in Suspicious Plant Food Supplements.

The popularity of plant food supplements has seen explosive growth all over the world, making them susceptible to adulteration and fraud. This necessitates a screening approach for the detection of regulated plants in plant food supplements, which are usually composed of complex plant mixtures, thus making the approach not so straightforward. This paper aims to tackle this problem by developing a multidimensional chromatographic fingerprinting method aided by chemometrics. To render more specificity to the chromatogram, a multidimensional fingerprint (absorbance × wavelength × retention time) was considered. This was achieved by selecting several wavelengths through a correlation analysis. The data were recorded using ultra-high-performance liquid chromatography (UHPLC) coupled with diode array detection (DAD). Chemometric modelling was performed by partial least squares-discriminant analysis (PLS-DA) through (a) binary modelling and (b) multiclass modelling. The correct classification rates (ccr%) by cross-validation, modelling, and external test set validation were satisfactory for both approaches, but upon further comparison, binary models were preferred. As a proof of concept, the models were applied to twelve samples for the detection of four regulated plants. Overall, it was revealed that the combination of multidimensional fingerprinting data with chemometrics was feasible for the identification of regulated plants in complex botanical matrices.

Liquid chromatographic method to follow-up ceftazidime and pyridine in portable elastomeric infusion pumps over 24 h.

Portable infusion pumps are an interesting solution to continue outpatient parenteral antimicrobial therapy (OPAT) at the patient's home. However, the use of ceftazidime for such applications is challenging in view of its relatively poor stability in solution. In this study, elastomeric infusion pumps with 6 or 7 g of ceftazidime were deflated over 24 h in an oven at 33°C while ceftazidime and its degradation product, pyridine, were regularly monitored. Hereto, a fast and sensitive liquid chromatographic (LC) method has been developed using a Kinetex® C18 (150 × 3 mm, 2.6 µm) column with gradient elution. Ammonium formate 20 mM and acetonitrile (ACN) were mixed in a ratio of 98:2 v/v for mobile phase A and 85:15 v/v for mobile phase B. Both were adjusted to pH 4.5 with formic acid. The flow rate was set at 0.4 mL/min. The solution with a starting dose of 6 g ceftazidime was found to be degraded 10% after an average of 19 h 11 min so that an administration of 6 g to the patient was not reached. For the solution with a starting dose of 7 g of ceftazidime, 10% degradation was observed after an average of 18 h 42 min. However, by starting from a higher dose, an average of 6.56 g of ceftazidime could be administered over 24 h. In addition, 1.0% of pyridine versus ceftazidime pentahydrate with sodium carbonate (=mixture for injection) was formed over 24 h.

Diastereomer recognition of three pairs of tetracyclines by electrospray ionization mass spectrometry.

RATIONALE: Stereoisomer profiling is always a difficult issue. Based on the difference between diastereomers, usually because of steric hindrance, isomers can be differentiated by mass spectrometry (MS), although it is often not an easy task. In the current study, tetracycline, chlortetracycline and doxycycline could be distinguished from their respective 4-epimers by MS. METHODS: The electrospray ionization tandem mass spectrometry (ESI-MSn ) analyses were carried out on a Bruker 3000plus ion trap mass spectrometer. For MS/MS experiments, the collision energy was set between 0.18 and 0.45 V to perform energy-resolved mass spectrometry (ERMS). Test solutions were prepared in methanol/water (90:10, v/v) at a concentration of 10 µg/mL. RESULTS: Compared with the collision-induced dissociation (CID) spectrum of protonated tetracycline, the most abundant peak changed from m/z 427 to m/z 410 for 4-epitetracycline. For chlortetracycline and its 4-epimer, differences in relative abundance were observed too. In the CID spectrum of a fragment ion of doxycycline, the abundance of m/z 154 was relatively higher than for the 4-epimer, showing the same trend as in the CID spectra of the other two pairs of tetracyclines. CONCLUSIONS: The CID spectra of tetracycline and chlortetracycline were different from those of their 4-epimers. The CID spectra of protonated doxycycline and its 4-epimer showed only a subtle difference, but the m/z 154 fragment ion in the CID spectra of the fragment ion at m/z 428 offers the possibility to differentiate both epimers.

Determination of Inorganic Ions in Parenteral Nutrition Solutions by Ion Chromatography.

A new, simple and sensitive ion chromatography (IC) method for the determination of sodium, potassium, magnesium, calcium and chloride in a parenteral nutrition (PN) solution was developed and validated. Before sample analysis, a sample pretreatment by calcination was applied which could totally remove interference from other constituents of the PN solution. Methanesulfonic acid (MSA) and sodium hydroxide were used as the mobile phase for the determination of cations and anions, respectively. The calibration curves showed good correlation between analyte peak area and concentration (r2 > 0.999). Detection limits ranged from 0.0001 to 0.02 mg/L and quantification limits from 0.0002 to 0.06 mg/L. Relative standard deviation (RSD) values for repeatability and inter-day precision did not exceed 1.0% and the recoveries for all analytes were between 99.1−101.1%. The robustness was verified by using an experimental design.

Evaluation of aloins, pH and moisture in aloe leaf gel-based personal care products.

OBJECTIVE: Some easily applicable analytical methods were explored to evaluate the quality of personal care products containing aloe leaf gel. Aloins should be absent in these products in view of their side effects. To check this, liquid chromatography (LC) was applied. METHODS: The LC method used a C18 monolithic column combined with gradient elution and ultraviolet (UV) detection. The mobile phase consisted of a mixture of 0.1% formic acid in water (A) and 0.1% formic acid in acetonitrile (B). The method was validated with respect to specificity, linearity, precision and accuracy. Next, it was practically applied for the analysis of commercial samples. In addition, the pH and moisture content were determined. RESULTS: The LC results indicated that aloins were detected in 25% of the analysed commercial samples. Further, it turned out that 42% of the test samples were found to be in the basic pH range and 33% of them contained excessive moisture. CONCLUSION: Proper quality control and adequate labelling of aloe leaf gel-based cosmetics are mandatory to avoid side effects.

OBJECTIF: Certaines méthodes analytiques facilement applicables ont été explorée pour évaluer la qualité des produits de soins personnels contenants du gel de feuille d'aloe. Les aloïnes doivent être absentes de ces produits en raison de leurs effets secondaires. Pour vérifier cela, la chromatographie liquide (CL) a été appliquée. MÉTHODES: La méthode CL a utilisé une colonne monolithique C18 combinée à une élution par gradient et une détection ultraviolette (UV). La phase mobile était constituée d'un mélange de 0,1 % d'acide formique dans l'eau (A) et de 0,1 % d'acide formique dans l'acétonitrile (B). La méthode a été validée en ce qui concerne la spécificité, la linéarité, la précision et l'exactitude. Ensuite, elle a été appliquée pour l'analyse d'échantillons commerciaux. De plus, le pH et la teneur en humidité ont été déterminés. RÉSULTATS: Les résultats CL ont indiqué que des aloïnes ont été détectées dans 25 % des échantillons commerciaux analysés. Il s'est avéré que 42 % des échantillons se trouvaient dans la plage de pH basique et que 33 % d'entre eux contenaient une humidité excessive. CONCLUSION: Un contrôle de qualité approprié et un étiquetage adéquat des cosmétiques à base de gel de feuille d'aloe sont obligatoires pour éviter des effets secondaires.

Headspace gas chromatography for the determination of volatile methylsiloxanes in personal care products.

Most of the reported methods for the analysis of volatile methylsiloxanes focus on their environmental fate or possible health effects, aiming at trace level analysis by using direct injection gas chromatography. However, system contamination as carry over and side reactions at the injector are commonly reported in those cases. In this article, we explore the use of headspace gas chromatography combined with the total vaporization technique as an alternative to avoid such issues for the analysis of linear (L2-L5) and cyclic (D3-D5) volatile methylsiloxanes. The proposed method showed good linearity with R2 values higher than 0.9961 and no significant contribution (α = 0.05) of the intercept. The limit of detection was always below 0.11 µg/vial (0.0025% m/m). Finally, the method was applied to real samples like an adhesive remover, hair oil, shampoo, and cream. After simple sample pretreatment, recoveries higher than 86% were achieved. Graphical abstract.

Aldehyde oxidase assay by capillary electrophoresis: From off-line, online up to immobilized enzyme reactor.

Capillary electrophoresis is a modern separation technique characterized by many benefits, which qualify it also for enzyme assays and the study of enzyme kinetics during drug development. Homogeneous or heterogeneous approaches can be followed for the enzymatic incubation. In this study, an immobilization procedure of aldehyde oxidase on magnetic particles was developed considering their integration with capillary electrophoresis. A number of magnetic nano/microparticle types were tested for this purpose, showing that aldehyde oxidase was most active when immobilized on bare silica magnetic nanoparticles. Primarily, the reusability of the enzyme immobilized on bare silica nanoparticles was tested. Three consecutive incubations with substrate could be performed, but the activity considerably dropped after the first incubation. One reason could be an enzyme detachment from the nanoparticles, but no release was detected neither at 4°C nor at 37°C during 5 h. The drop in enzymatic activity observed in consecutive incubations, could also be due to inactivation of the enzyme over time at given temperature. For the immobilized enzyme stored at 4°C, the activity decreased to 83% after 5 h, in contrast with a steep decrease at 37°C to 37%.

Study of aldehyde oxidase by micellar electrokinetic chromatography separation of O6 -benzylguanine and 8-oxo-O6 -benzylguanine.

A separation method for O6 -benzylguanine (O6 -BG) and 8-oxo-O6 -benzylguanine (8-oxo-O6 -BG) is developed by using MEKC. This study includes the optimization of separation and incubation parameters for both off-line and on-line procedures. The BGE consisted of 25 mM sodium phosphate buffer-methanol (70:30, v/v), apparent pH 7.4, in which SDS and methyl-ß-cyclodextrin were dissolved yielding final concentrations of 50 and 15 mM, respectively. Separations were performed at 15 kV using an untreated fused-silica capillary (40 cm length, effective length is 30 cm) with the detection wavelength at 195 nm. The capillary was kept at 15°C. Good performances were demonstrated for the repeatability and linearity. The LOQ was determined to be 14 µM for 8-oxo-O6 -BG (S/N = 10). The accuracy values showed a bias of +7.9% for 50 µM and -7.0% for 100 µM. Premix and transverse diffusion of laminar flow profiles (TDLFP) methods were used for on-line mixing and reaction of the substrate O6 -BG with aldehyde oxidase. Both procedures were successful in mixing as well as subsequent separation of the substrate and the metabolite, while the repeatability of TDLFP (14.7% (n = 3)) was much better than the premix technique.

Immobilizing sulfotransferase 1A1 on magnetic microparticles and their evaluation using capillary electrophoresis.

Sulfotransferases are categorized as phase II metabolic enzymes. Human sulfotransferase 1A1 (SULT1A1) is involved in the sulfonation of xenobiotics with aid from the cofactor 3'-phosphoadenosine-5'-phosphosulfate that acts as a sulfonate donor. In this study, we have attempted to immobilize SULT1A1 on magnetic microparticles (MMs). Different functionalized MMs were used to immobilize SULT1A1 and their enzyme activity was compared to the control (enzyme in solution). Paracetamol was used as model substrate. Separation of paracetamol and paracetamol sulfate by CE-UV was optimized and validated. MMs with epoxy based immobilization of SULT1A1 showed better enzyme activity. Hence, they were tested for repeated usage to allow their implementation for the development of a CE immobilized micro enzyme reactor.

Exploration of the problems and solutions related to reference introduction prior to calibration of thermal desorber-gas chromatography.

Reference introduction in thermal desorption with gas chromatography is a critical aspect. It is mostly performed by offline liquid calibration using a micro syringe to inject a liquid standard solution on the sorbent in the thermal desorption tube. This is based on the assumptions that the adsorption-desorption process is quantitative and that no sample is lost in manipulating the tube. However, for analytical procedures involving thermal extraction of solid matrices, the adsorption-desorption processes for sample and reference differ and the assumptions are not always fulfilled. This is explored in this work. First, issues related to the online liquid calibration were investigated. With tubes containing only quartz filters, a relative loss of over 80% was noticed for some solvents due to tube manipulation processes. Enclosing a bed of mesoporous silica as sorbent limited the losses to about 25% when samples were immediately analysed, and even better results were obtained when tubes were stored for several hours so that proper adsorption could take place. An additional sweep gas during loading boosted the transfer of analytes with recoveries above 95%. Next, an inline injection system was installed on the thermal desorber instrument. This sorbent free, independent calibration tool avoids the drawbacks of other approaches.

Overview of sample introduction techniques prior to GC for the analysis of volatiles in solid materials.

Sample preparation and introduction techniques are very critical steps in gas chromatography analysis and particularly in the analysis of volatiles in solid samples. In these cases, they can be divided into two main categories: direct and indirect approaches, based on how the solid sample is treated, i.e. with and without dissolution (or extraction) of analytes from the solid sample. To enable routine application, coupling with sample preparation techniques (especially solid or solvent-based microextractions) is needed to achieve automation. Here, an overview of the most common sample introduction techniques for gas chromatography with their advantages and drawbacks is presented and discussed, including references to relevant examples. So, this review can serve as guidance for new users.

A simple, low-cost and robust capillary zone electrophoresis method with capacitively coupled contactless conductivity detection for the routine determination of four selected penicillins in money-constrained laboratories.

A simple and robust capillary zone electrophoresis method was developed and validated for the determination of amoxicillin and clavulanate, ampicillin, phenoxymethyl penicillin (Pen V) as well as flucloxacillin. Capacitively coupled contactless conductivity detection was employed as detection mode that makes CE a simple and economic tool for money-constrained laboratories. The developed method is straightforward and user-friendly. It offers good sensitivity and sufficient selectivity for the routine assay of the selected penicillins. The repeatabilities were <1.9% RSD for relative peak areas and <1% RSD for migration times for all the analytes. The method showed good linearity (R2  > 0.995) within the 80-120% range of the target concentration (0.5 mg/mL) for each antibiotic. The accuracy of the method, evaluated by standard fortification at three levels, was good for all the analytes. An extended robustness study was performed by varying ±10% of the optimum value of TRIS concentration, l-histidine concentration and temperature in a full factorial design at two levels. This was to evaluate larger than usual variability of factors on the assay value, in order to better cover potential global variance in lab conditions and equipment. Finally, the method was applied for the determination of percent (%) content of all antibiotics in available formulations.

Development of a reversed phase liquid chromatographic method for analysis of pyridoxal-5'-phosphate and its impurities.

Since no proper method is available in literature for the analysis of pyridoxal-5'-phosphate, a reversed phase liquid chromatographic method was developed and validated for specificity, sensitivity, linearity, precision and accuracy. Nine potential related substances and forced degradation products could be successfully separated from the main peak. The separation was achieved on a Polaris C18 column (250 × 4.6 mm i.d., 5 µm) using a mobile phase consisting of 20 mM ammonium formate in 0.65% formic acid - acetonitrile (98.8:1.2, v/v). Isocratic elution was performed at a flow rate of 1.0 mL/min and the analytes were detected by UV at 240 nm. The volatile mobile phase allowed also direct coupling to an ion-trap mass spectrometer with a positive electrospray ionization source to characterize unknown peaks in the chromatogram. The method can be used for quality control purposes as required by regulatory authorities to ensure the product's safety and efficacy.

Advances in Capillary Electrophoretically Mediated Microanalysis for On-line Enzymatic and Derivatization Reactions.

This review summarizes recent developments, applications, and innovations of capillary electrophoretically mediated microanalysis methods. As a follow up of an earlier review, it covers the literature from early 2015 to early 2017. This article is divided into three parts. In the first part, different types of mixing procedures and applications of enzyme mediated microanalysis are discussed; the second part summarizes immobilized enzyme reactors (IMERs), while the third part deals with recent advances in on-line derivatization reactions.

An improved design to capture magnetic microparticles for capillary electrophoresis based immobilized microenzyme reactors.

In this paper, we demonstrate the effectiveness of a new 3D printed magnet holder that enables capture of magnetic microparticles in commercially available capillary electrophoresis equipment with a liquid or air based coolant system. The design as well as the method to capture magnetic microparticles inside the capillary are discussed. This setup was tested at temperature and pH values suitable for performing enzymatic reactions. To demonstrate its applicability in CE- immobilized microenzyme reactors (IMER) development, human flavin-containing monooxygenase 3 and bovine serum albumin were immobilized on amino functionalized magnetic microparticles using glutaraldehyde. These microparticles were subsequently used to perform in-line capillary electrophoresis with clozapine as a model substrate. This setup could be used further to establish CE-IMERs of other drug metabolic enzymes in a commercially available liquid based capillary coolant system. The CE-IMER setup was successful, although a subsequent decrease in enzyme activity was observed on repeated runs.