Oral cancer among Khat users: finding evidence from DNA analysis of nine cancer-related gene mutations.

BACKGROUND: Khat leaves contain the alkaloid cathinone. Research shows that khat might provoke toxicity, mutagenicity, as well as carcinogenicity. METHODS: Two groups were identified as khat abusers and were categorized by abuse time and diagnosis of oral squamous cell carcinoma (OSCC). Here, 41 participants from Group 2 were short-term khat users, and 42 participants were long-term khat users. The control group included 30 healthy individuals. The coding exons included nine cancer-related genes and were analysed. The histopathological research was conducted with H&E staining along with the TP53 protein expression by implementing immunohistochemical analyses. RESULTS: Here, 41 short-term khat users carried seven somatic mutations in four out of nine cancer-related genes: 29/41(70.73%) ARID1A, 24/41(58.53%) MLH1, 34/41(82.92%) PIK3CA and 36/41(87.80%) TP53. The 42 long-term khat users incorporated nine somatic mutations in five out of nin ecancer-related genes: 40/42(95.23%) ARID1A, 36/42(85.71%) ARID2, 29/42(69.04%) PIK3CA, 27/42(64.28%) MLH1, and 35/42(83.33%) TP53. Every khat user had somatic mutations related to OSCC affecting the gingiva and the lower lip. TP53 protein expression was confirmed in all immunohistochemical oral tests. Carcinoma was also positive in the histopathological analysis. CONCLUSIONS: Khat is a mutagenic and carcinogenic plant that provoked OSCC among short-term khat users (<15 years of use) and long-term users (>15 years of use).

Fiber-reinforced composites in dentistry - An insight into adhesion aspects of the material and the restored tooth construct.

OBJECTIVE: This review aimed to highlight the insight into adhesion aspects within the components of the glass FRC (i.e., fiber and matrix) and between resin luting material and the glass FRC construction. METHODS: The fundamentals of semi-interpenetrating polymer network (semi-IPN) based FRCs and their advantages in forming a solid adhesive interface with indirect FRC restoration, dental adhesive, and luting cement are elaborated. The important resin matrix systems and glass fibers used in FRCs are discussed. This is principally based on a survey of the literature over Medline/PubMed, Web of Science, and Scopus databases and a review of the relevant studies and publications in scientific papers in international peer-reviewed journals for the specific topic of biomaterials science. The keywords used for the search approach were: adhesion, fiber-reinforced composite, glass fiber, and semi-interpenetrating polymer network. RESULTS: The polymer matrix systems of semi-IPN-based FRCs and formation of secondary-IPN layer are pivotal for bonding of multiphasic indirect dental constructs and repair. Additionally, describing areas of indication for FRCs in dentistry, explaining the adhesion aspects of FRC for the cohesion of the material itself, and for obtaining durable adhesion when the FRC construct is luted to tooth and remaining dentition. Current progress in the field of FRC research and future directions are summarized and presented. SIGNIFICANCE: By understanding the isotropic-anisotropic nature of fibers and the interfacial adhesion within the components of the FRC; between resin cement and the FRC construction, the clinically successful FRC-based multiphasic indirect tooth construct can be achieved. The interfacial adhesion within the components of the FRC and between resin luting material and the FRC construction play a key role in adhesion-based unibody dental restorations.

FGFR3 and FGFR4 overexpression in juvenile nasopharyngeal angiofibroma: impact of smoking history and implications for personalized management.

Lifestyle factors, including smoking, have been linked to neoplastic diseases, and reports suggest an association between smoking and overexpression of FGFR (fibroblast growth factor receptor) in certain neoplasms. This study aims to assess the expression of FGFR3 and FGFR4 genes in patients with and without a history of smoking.A total of 118 participants were recruited, including 83 Juvenile Nasopharyngeal Angiofibroma (JNA) patients and 35 healthy participants, the JNA patients were further stratified as smokers and nonsmokers. Total RNA was extracted from the blood & saliva sample by using TRIzol reagent, and quantified using a Nanodrop, and then subjected to gene expression analysis of FGFR3/4 using RT-PCR. Immunohistochemistry analysis was employed using fresh biopsies of JNA to validate the findings. All experiments were performed in triplicates and analysed using the Chi-Square test (P < 0.05). Smokers exhibited significantly lower total RNA concentrations across all sample types (P < 0.001). The study revealed significant upregulation of both FGFR3/4 genes in JNA patients (P < 0.05). Moreover, FGFR3 expression was significantly higher among smokers 66% (95% CI: 53-79%) compared to non-smokers 22% (95% CI: 18-26%). Immunohistochemistry analysis demonstrated moderate to strong staining intensity for FGFR3 among smokers. The study highlights the overexpression of FGFR3/4 genes in JNA patients, with a stronger association observed among smokers. Furthermore, medical reports indicated higher rates of recurrence and bleeding intensity among smokers. These findings emphasize the potential role of FGFR3 as a key molecular factor in JNA, particularly in the context of smoking.

Minocycline incorporated cobalt oxide nanoparticles in dental sealants: An in vitro study.

The purpose of this study was to introduce antibacterial property to pits and fissure sealant (PFS) in order to mitigate the major clinical problems associated with PFS, such as microleakage and secondary caries. We prepared a pH reliant cobalt oxide nanoparticle incorporated with minocycline (MNC@CO) and characterized to investigate its antibacterial potential against Streptococcus sobrinus. The physiochemical, morphological, and drug release kinetics at different pH (7.4, 5.0, and 3.5) from nanoparticles were investigated. The MNC@CO were added at 2.5% and 5.0% into experimental PFS and characterized for their antibiofilm capacity, biocompatibility, and mechanical properties including compressive and flexural strength. The groups 2.5% and 5.0% has shown statistically significant antimicrobial capacity against S. sobrinus compared to control (p < .05). The highest percentage of MNC release at different pH (especially at pH 5.0 and 3.5) was observed from 5.0% MNC@CO doped PFS. The PFS doped with 2.5% MNC@CO showed a highest compressive strength (110 MPa) over a period of 70 days as compared to 5.0% MNC@CO (75 MPa) and control (80 MPa). The flexural strength of both experimental groups was lower for both time points (24 h and 30 days) than control. In conclusion, the present study found that 2.5% MNC@CO doped PFS showed considerable anti-biofilm potential without compromising mechanical properties.

Interfacial Adhesion of a Semi-Interpenetrating Polymer Network-Based Fiber-Reinforced Composite with a High and Low-Gradient Poly(methyl methacrylate) Resin Surface.

The research aimed to determine the tensile bond strength (TBS) between polymerized intact and ground fiber-reinforced composite (FRC) surfaces. FRC prepregs (a reinforcing fiber pre-impregnated with a semi-interpenetrating polymer network (semi-IPN) resin system; everStick C&B) were divided into two groups: intact FRCs (with a highly PMMA-enriched surface) and ground FRCs (with a low PMMA gradient). Each FRC group was treated with: StickRESIN and G-Multi PRIMER. These groups were further divided into four subgroups based on the application time of the treatment agents: 0.5, 1, 2, and 5 min. Next, a resin luting cement was applied to the FRC substrates on the top of the photo-polymerized treating agent. Thereafter, weight loss, surface microhardness, and TBS were evaluated. Three-factor analysis of variance (p ≤ 0.05) revealed significant differences in the TBS among the FRC groups. The highest TBS was recorded for the intact FRC surface treated with G-Multi PRIMER for 2 min (13.0 ± 1.2 MPa). The monomers and solvents of G-Multi PRIMER showed a time-dependent relationship between treatment time and TBS. They could diffuse into the FRC surface that has a higher PMMA gradient, further resulting in a high TBS between the FRC and resin luting cement.

Photodynamic antimicrobial chemotherapy through photosensitizers loaded poly-l-glycolic acid on Candida albicans in denture lining material: Release, biological and hardness study.

AIM: The aim of this in-vitro study was to formulate poly-l-glycolic acid nanoparticles loaded with methylene blue (PLGA-MB) and to characterize their physicochemical features, photosensitizer-release kinetics and antimicrobial efficacy against Candida albicans (C. albicans) after incorporating in polymethyl methacrylate (PMMA) denture lining materials. MATERIAL AND METHODS: MB-PLGA nanoparticles were synthesized according to the modified nanoprecipitation method. The morphological characterization of the nanoparticles was studied under scanning and transmission electron microscope. Particle size, surface charge, polydispersity index (PDI) and MB release were evaluated. The effect of 660 nm semiconductor AlGaInP diode laser on C. albicans was studied in vitro. The PMMA was weighed and PLGA free and PLGA-MB were added in the lining material according to the weight percentage as 2.0 wt.% and 5.0 wt.% and tested for the diameter of the inhibition zones of C. albicans growth and shore A hardness. RESULTS: Homogenous spherical nanoparticles with round morphology with size ranging between 60-80 nm were observed while PLGA-MB were seen to have irregular structure within the nanoparticle under TEM. PLGA-Free was larger in size than the loaded PLGA (∼62 nm) that evidenced reduction in size by adding the MB photosensitizer. PDI recordings reduced from 0.198 for the PLGA-Free nanoparticles to 0.164 for the PLGA-MB nanoparticles. The entrapment efficiency of MB inside PLGA showed an average percentage of ∼75 % uptake that resulted in the overall loading of ∼15 %. An overall inhibition of 78 %, 41 % and 28 % of C. albicans growth was seen with a concentration of 0.1, 0.5 and 1.0 µg/mL, respectively. The application of PLGA nanoparticles loaded with MB evidenced >75 % of C. albicans. MB incorporation did not lead to a clinically relevant change on shore A hardness. CONCLUSION: PLGA loaded with MB is believed to have promising target therapy against C. albicans in denture soft lining materials in terms of PACT in vitro. The synergistic association between PLGA and MB proved enhanced antifungal activity. PLGA-MB could be an important tool in nanobiotechnology and photodynamic therapy for novel formulations with higher antimicrobial efficacy and improved drug delivery from denture soft lining materials.

Epidemiology of cancer in Saudi Arabia thru 2010-2019: a systematic review with constrained meta-analysis.

BACKGROUND: Cancer is emerging as a major global health-care system challenge with a growing burden worldwide. Due to the inconsistent cancer registry system in Saudi Arabia, the epidemiology of cancer is still dispersed in the country. Consequently, this review aimed to assemble the epidemiological metrics of cancer in Saudi Arabia in light of the available published data during the period from (2010-2019). METHODS: Published literature from Saudi Arabia relating to cancer incidence, prevalence, risk factors, and other epidemiological metrics were accessed through electronic search in Medline/PubMed, Cochrane, Scopus, Web of Knowledge, Google Scholar, and public database that meet the inclusion criteria. Relevant keywords were used during the electronic search about different types of cancers in Saudi Arabia. No filters were used during the electronic searches. Data were pooled and odds ratios (ORs) and 95% confidence interval (95%CI) were calculated. A random-effects meta-analysis was performed to assess the well-determined risk factors associated with different types of cancers. RESULTS: The most common cancers in Saudi Arabia are breast, colorectal, prostate, brain, lymphoma, kidney and thyroid outnumbering respectively. Their prevalence rates and OR (95%CI) as follow: breast cancer 53% and 0.93 (0.84-1.00); colon-rectal cancer (CRC) 50.9% and 1.2 (0.81-1.77); prostate cancer 42.6% and 3.2 (0.88-31.11); brain/Central Nervous System cancer 9.6% and 2.3 (0.01-4.2); Hodgkin and non-Hodgkin's lymphoma 9.2% and 3.02 (1.48-6.17); kidney cancer 4.6% and 2.05 (1.61-2.61), and thyroid cancer 12.9% and 6.77 (2.34-19.53). CONCLUSION: Within the diverse cancers reported from Saudi Arabia, the epidemiology of some cancers magnitude 3-fold in the latest years. This increase might be attributed to the changing in the Saudi population lifestyle (adopting western model), lack of cancer awareness, lack of screening & early detection programs, social barriers toward cancer investigations. Obesity, genetics, sedentary lifestyle, tobacco use, viral infection, and iodine & Vit-D deficiency represent the apparent cancer risk factors in Saudi Arabia.

Oral and Oropharyngeal Cancers and Possible Risk Factors Across Gulf Cooperation Council Countries: A Systematic Review.

BACKGROUND: In recent years, there is an emerging increase in the prevalence of oral and oropharyngeal cancers (O-OPCs) across the Arabian Gulf Cooperation Council (GCC) countries. Consequently, this review aimed to explore the epidemiology and possible risk factors of O-OPCs in GCC countries. METHODS: Data published after 2008 related to O-OPCs in GCC countries were obtained through electronic searches in Medline/PubMed, Scopus, Web of Science, EMBASE and Google Scholar. Keywords related to the association between O-OPCs metrics (epidemiology and risk factors) and GCC countries were used for electronic searches. RESULTS: The overall prevalence of OPCs increased significantly over time (40-51%) in some countries (Saudi Arabia and Arab Emigrated) of the Gulf regions. The pooled risk factor was 3.4 (2.5 - 4.7). Among the risk factors, human papillomavirus and the use of smoke and smokeless tobacco revealed odds ratio (OR) 3.31 (3.13 - 4.5) and 0.60 (0.45 - 0.80) at 95% confidence interval (CI). CONCLUSION: A positive correlation between factors like age, diet, hygiene, genetics, viral and bacterial infection, consumption of alcohol and tobacco products with OPC-MFC is suggested.