RESUMO
Materials with tunable negative electromagnetic performance, i.e., where dielectric permittivity becomes negative, have long been pursued in materials research due to their peculiar electromagnetic (EM) characteristics. Here, this promising feature is reported in materials on the case of plasma-synthesized nitrogen-doped graphene sheets with tunable permittivity over a wide (1-40 GHz) frequency range. Selectively incorporated nitrogen atoms in a graphene scaffold tailor the electronic structure in a way that provides an ultra-low energy (0.5-2 eV) 2D surface plasmon excitation, leading to subunitary and negative dielectric constant values in the Ka-band, from 30 up to 40 GHz. By allowing the tailoring of structures at atomic scale, this novel plasma-based approach creates a new paradigm for designing 2D nanomaterials like nanocarbons with controllable and tunable permittivity, opening a path to the next generation of 2D metamaterials.
RESUMO
This work presents a detailed investigation aimed at understanding the key mechanisms governing nitric oxide (NO) production in N2-O2 discharges by systematically comparing experimental results to modeling data. The experimental phase capitalizes on radiofrequency (13.56 MHz) discharges, sustained at 5 mbar pressure conditions, featuring varying concentrations of oxygen, ranging from pure N2 plasma to air-like mixtures. On the modeling front, we adopt an integrated approach that combines the solution of the Boltzmann equation for electrons with a system of rate balance equations for heavy species. To account for ground state NO(X) generation at the reactor wall, we combine the volume chemistry with a mesoscopic description of the surface, taking into account adsorption sites and various elementary surface phenomena. Comparisons between experiments and modeling demonstrate very good agreement, extending beyond NO(X) formation to encompass other species in the plasma such as N2O(X) and atomic nitrogen N(4S). Noteworthy findings include (i) the pivotal role of surface mechanisms in NO(X) production, particularly at low oxygen content values; (ii) the significance of accurately describing the postdischarge phase, where depletion of plasma species occurs at different time scales (millisecond range); and (iii) the importance of vibrationally and electronically excited states (e.g., O2(b)) in elucidating NO(X) formation dynamics, crucial for unraveling reaction pathways and energy transfer processes. This work makes an important step toward formulating a comprehensive reaction mechanism for N2 and N2-O2 plasmas applied to nitrogen fixation, covering both volume and surface mechanisms, and lays a robust foundation for future research on plasma-based NO(X) production, particularly in the presence of catalysts.
RESUMO
PURPOSE: The purpose of this study was to study the relationship between the presence of a deep lateral femoral notch sign (DLFNS) in anterior cruciate ligament (ACL)-injured patients and a higher posterior lateral tibial slope (LPTS), a reduced meniscal bone angle (MBA), a higher LPTS/MBA ratio and a higher incidence of concomitant injuries in primary ACL tears. METHODS: A retrospective case-control study was performed in patients submitted to primary ACL reconstruction with an available preoperative magnetic resonance imaging (MRI) scan. Patients with ACL tears and a femoral impactation with a depth ≥2 mm were assorted to the DLFNS group and patients with ACL tear and without a DLFNS to the control group. LPTS and MBA were measured in MRI. The presence of concomitant injuries (meniscal, posterior cruciate ligament, medial collateral ligament, lateral collateral ligament and bone injuries) was assessed in MRI. Quantitative data are presented in the median ± interquartile range (IQR). RESULTS: There were 206 patients included in the study, with 46 patients assorted to the DLFNS group and 160 patients to the control group. In the DLFNS group, the median LPTS was 6.7° (IQR: 4.0-8.2) versus 4.0° in the control group (IQR: 2.2-6.5) (p = 0.003). The LPTS/MBA ratio was significantly higher in the DLFNS group, with a median of 0.32 (IQR: 0.19-0.44), in comparison to the control group, with a median of 0.19 (IQR: 0.11-0.31) (p < 0.001). The multivariable logistic regression analysis showed that the LPTS is an independent risk factor to having a DLFNS (odds ratio [OR] = 1.161; 95% confidence interval [CI]: 1.042-1.293, p = 0.007). There was a higher incidence of concomitant lateral meniscal injuries in the DLFNS group (67% vs. 48%, p = 0.017). CONCLUSIONS: In patients with ACL tears, the presence of a DLFNS is associated with a steeper lateral posterior tibial slope, as well as a higher incidence of concomitant lateral meniscal injuries. LEVEL OF EVIDENCE: Level III.
Assuntos
Lesões do Ligamento Cruzado Anterior , Reconstrução do Ligamento Cruzado Anterior , Fêmur , Imageamento por Ressonância Magnética , Tíbia , Lesões do Menisco Tibial , Humanos , Estudos Retrospectivos , Masculino , Feminino , Lesões do Ligamento Cruzado Anterior/cirurgia , Lesões do Ligamento Cruzado Anterior/complicações , Lesões do Ligamento Cruzado Anterior/diagnóstico por imagem , Adulto , Estudos de Casos e Controles , Fêmur/diagnóstico por imagem , Tíbia/diagnóstico por imagem , Lesões do Menisco Tibial/diagnóstico por imagem , Lesões do Menisco Tibial/cirurgia , Adulto Jovem , Adolescente , Meniscos Tibiais/diagnóstico por imagem , Meniscos Tibiais/cirurgiaRESUMO
Mycoses are one of the major causes of morbidity/mortality among immunocompromised individuals. Considering the importance of these infections, the World Health Organization (WHO) defined a priority list of fungi for health in 2022 that include Candida albicans as belonging to the critical priority group and Pichia kudriavzevii (Candida krusei) to the medium priority group. The existence of few available antifungal drugs, their high toxicity, the acquired fungal resistance, and the appearance of new species with a broader spectrum of resistance, points out the need for searching for new antifungals, preferably with new and multiple mechanisms of action. The cyclam salt H4[H2(4-CF3PhCH2)2Cyclam]Cl4 was previously tested against several fungi and revealed an interesting activity, with minimal inhibitory concentration (MIC) values of 8 µg/mL for C. krusei and of 128 µg/mL for C. albicans. The main objective of the present work was to deeply understand the mechanisms involved in its antifungal activity. The effects of the cyclam salt on yeast metabolic viability (resazurin reduction assay), yeast mitochondrial function (JC-1 probe), production of reactive oxygen species (DCFH-DA probe) and on intracellular ATP levels (luciferin/luciferase assay) were evaluated. H4[H2(4-CF3PhCH2)2Cyclam]Cl4 induced a significant decrease in the metabolic activity of both C. albicans and C. krusei, an increase in Reactive Oxygen Species (ROS) production, and an impaired mitochondrial function. The latter was observed by the depolarization of the mitochondrial membrane and decrease in ATP intracellular levels, mechanisms that seems to be involved in the antifungal activity of H4[H2(4-CF3PhCH2)2Cyclam]Cl4. The interference of the cyclam salt with human cells revealed a CC50 value against HEK-293 embryonic kidney cells of 1.1 µg/mL and a HC10 value against human red blood cells of 0.8 µg/mL.
Assuntos
Antifúngicos , Candida albicans , Candida , Testes de Sensibilidade Microbiana , Espécies Reativas de Oxigênio , Antifúngicos/farmacologia , Candida albicans/efeitos dos fármacos , Humanos , Espécies Reativas de Oxigênio/metabolismo , Candida/efeitos dos fármacos , Mitocôndrias/efeitos dos fármacos , Mitocôndrias/metabolismo , Potencial da Membrana Mitocondrial/efeitos dos fármacos , PichiaRESUMO
Cellulose and lignin, sourced from biomass, hold potential for innovative bioprocesses and biomaterials. However, traditional fractionation and purification methods often rely on harmful chemicals and high temperatures, making these processes both hazardous and costly. This study introduces a sustainable approach for fractionating acacia wood, focusing on both cellulose and lignin extraction using a deep eutectic solvent (DES) composed of choline chloride (ChCl) and levulinic acid (LA). A design of experiment was employed for the optimization of the most relevant fractionation parameters: time and temperature. In the case of the lignin, both parameters were found to be significant variables in the fractionation process (p-values of 0.0128 and 0.0319 for time and temperature, respectively), with a positive influence. Likewise, in the cellulose case, time and temperature also demonstrated a positive effect, with p-values of 0.0103 and 0.028, respectively. An optimization study was finally conducted to determine the maximum fractionation yield of lignin and cellulose. The optimized conditions were found to be 15% (w/v) of the wood sample in 1:3 ChCl:LA under a treatment temperature of 160 °C for 8 h. The developed method was validated through repeatability and intermediate precision studies, which yielded a coefficient of variation lower than 5%. The recovery and reuse of DES were successfully evaluated, revealing remarkable fractionation yields even after five cycles. This work demonstrates the feasibility of selectively extracting lignin and cellulose from woody biomass using a sustainable solvent, thus paving the way for valorization of invasive species biomass.
Assuntos
Acacia , Celulose , Fracionamento Químico , Solventes Eutéticos Profundos , Lignina , Madeira , Lignina/química , Lignina/isolamento & purificação , Celulose/química , Acacia/química , Madeira/química , Fracionamento Químico/métodos , Solventes Eutéticos Profundos/química , Solventes/química , Temperatura , BiomassaRESUMO
Desoxyribosenucleic acid, DNA, and cellulose molecules self-assemble in aqueous systems. This aggregation is the basis of the important functions of these biological macromolecules. Both DNA and cellulose have significant polar and nonpolar parts and there is a delicate balance between hydrophilic and hydrophobic interactions. The hydrophilic interactions related to net charges have been thoroughly studied and are well understood. On the other hand, the detailed roles of hydrogen bonding and hydrophobic interactions have remained controversial. It is found that the contributions of hydrophobic interactions in driving important processes, like the double-helix formation of DNA and the aqueous dissolution of cellulose, are dominating whereas the net contribution from hydrogen bonding is small. In reviewing the roles of different interactions for DNA and cellulose it is useful to compare with the self-assembly features of surfactants, the simplest case of amphiphilic molecules. Pertinent information on the amphiphilic character of cellulose and DNA can be obtained from the association with surfactants, as well as on modifying the hydrophobic interactions by additives.
Assuntos
Celulose , DNA , Ligação de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , TensoativosRESUMO
The European Shock Tube for High-Enthalpy Research is a new state-of-the-art facility, tailored for the reproduction of spacecraft planetary entries in support of future European exploration missions, developed by an international consortium led by Instituto de Plasmas e Fusão Nuclear and funded by the European Space Agency. Deployed state-of-the-art diagnostics include vacuum-ultraviolet to ultraviolet, visible, and mid-infrared optical spectroscopy setups, and a microwave interferometry setup. This work examines the specifications and requirements for high-speed flow measurements, and discusses the design choices for the main diagnostics. The spectroscopy setup covers a spectral window between 120 and 5000 nm, and the microwave interferometer can measure electron densities up to 1.5 × 1020 electrons/m3. The main design drivers and technological choices derived from the requirements are discussed in detail herein.
Assuntos
Interferometria , Astronave , Análise Espectral , PlanetasRESUMO
Microalgae cultivation can be used to increase the sustainability of carbon emitting processes, converting the CO2 from exhaust gases into fuels, food and chemicals. Many of the carbon emitting industries operate in a continuous manner, for periods that can span days or months, resulting in a continuous stream of gas emissions. Biogenic CO2 from industrial microbiological processes is one example, since in many cases it becomes unsustainable to stop these processes on a daily or weekly basis. To correctly sequester these emissions, microalgae systems must be operated under continuous constant conditions, requiring photobioreactors (PBRs) that can act as chemostats for long periods of time. However, in order to optimize culture parameters or study metabolic responses, bench-scale setups are necessary. Currently there is a lack of studies and design alternatives using chemostat, since most works focus on batch assays or semi-continuous cultures. Therefore, this work focused on the development of a continuous bench-scale PBR, which combines a retention vessel, a photocollector and a degasser, with an innovative recirculation system, that allows it to operate as an autotrophic chemostat, to study carbon sequestration from a biogenic CO2-rich constant air stream. To assess its applicability, the PBR was used to cultivate the green microalga Haematococcus pluvialis using as sole carbon source the CO2 produced by a coupled heterotrophic bacterial chemostat. An air stream containing ≈0.35 vol% of CO2, was fed to the system, and it was evaluated in terms of stability, carbon fixation and biomass productivity, for dilution rates ranging from 0.1 to 0.5 d-1. The PBR was able to operate under chemostat conditions for more than 100 days, producing a stable culture that generated proportional responses to the stimuli it was subjected to, attaining a maximum biomass productivity of 183 mg/L/d with a carbon fixation efficiency of ≈39% at 0.3 d-1. These results reinforce the effectiveness of the developed PBR system, making it suitable for laboratory-scale studies of continuous photoautotrophic microalgae cultivation.
Assuntos
Microalgas , Fotobiorreatores , Fotobiorreatores/microbiologia , Dióxido de Carbono , Gases , Biomassa , CarbonoRESUMO
[(Bn2Cyclam)Y(N(SiMe3)2)] was prepared by reaction of H2Bn2Cyclam with Y[N(SiMe3)2]3. The protonation of the macrocycle ligand in [(Bn2Cyclam)Y(N(SiMe3)2)] is observed upon reaction with [HNMe3][BPh4] leading to the formation of [(HBn2Cyclam)Y(N(SiMe3)2)][BPh4]. DFT analysis of [(Bn2Cyclam)Y(N(SiMe3)2)] showed that the HOMO is located on the anionic nitrogen atoms of the cyclam ring indicating that protonation follows orbital control. Addition of H2Bn2Cyclam and H2(3,5-tBu2Bn)2Cyclam to a 1:3 mixture of YCl3 and LiCH2SiMe3 in THF resulted in the formation of [((C6H4CH2)BnCyclam)Y(THF)(µ-Cl)Li(THF)2] and [Y{(η3-3,5-tBu2Bn)2Cyclam}Li(THF)], respectively. The reaction of H23,5-tBu2Bn2Cyclam with Y(CH2SiMe3)3(THF)2 was studied and monitored by a temperature variation NMR experiment revealing the formation of [(3,5-tBu2Bn2Cyclam)Y(CH2SiMe3)]. Preliminary catalytic assays have shown that [Y{(η3-3,5-tBu2Bn)2Cyclam}Li(THF)] is a very efficient catalyst for the intramolecular hydroamination of 2,2-diphenyl-pent-4-enylamine.
RESUMO
In the history of cellulose chemistry, hydrogen bonding has been the predominant explanation when discussing intermolecular interactions between cellulose polymers. This is the general consensus in scholarly textbooks and in many research articles, and it applies to several other biomacromolecules' interactions as well. This rather unbalanced description of cellulose has likely impacted the development of materials based on the processing of cellulose-for example, via dissolution in various solvent systems and regeneration into solid materials, such as films and fibers, and even traditional wood fiber handling and papermaking. In this review, we take as a starting point the questioning of the general description of the nature of cellulose and cellulose interactions initiated by Professor Björn Lindman, based on generic physicochemical reasoning about surfactants and polymers. This dispute, which became known as "the Lindman hypothesis", highlights the importance of hydrophobic interactions in cellulose systems and that cellulose is an amphiphilic polymer. This paper elaborates on Björn Lindman's contribution to the subject, which has caused the scientific community to revisit cellulose and reconsider certain phenomena from other perspectives.
RESUMO
Wireless sensor networks (WSNs) are currently being deployed in everyday objects to collect and transmit information related to humidity, temperature, heartbeat, motion, etc. Such networks are part of the massive machine-type communication (mMTC) scenario within the fifth/sixth generation of wireless networks. In this paper, we consider the optimization and design of an optical WSN composed of multiple battery-powered sensor nodes based on light-emitting diode transmitters. Extending our previous work, we take into account both line-of-sight and diffuse-light propagation, and show that in indoor scenarios, diffuse radiation can improve link availability under shadowing/blocking and extend battery life. In order to optimize the optical wireless link parameters, we use a machine-learning approach based on a genetic algorithm to ascertain the performance limits of the system. The presented results indicate that the proposed system is a viable wireless option for WSNs within the context of mMTC.
RESUMO
The rapid expansion of high-quality genome assemblies, exemplified by ongoing initiatives such as the Genome-10K and i5k, demands novel automated methods to approach comparative genomics. Of these, the study of inactivating mutations in the coding region of genes, or pseudogenization, as a source of evolutionary novelty is mostly overlooked. Thus, to address such evolutionary/genomic events, a systematic, accurate and computationally automated approach is required. Here, we present PseudoChecker, the first integrated online platform for gene inactivation inference. Unlike the few existing methods, our comparative genomics-based approach displays full automation, a built-in graphical user interface and a novel index, PseudoIndex, for an empirical evaluation of the gene coding status. As a multi-platform online service, PseudoChecker simplifies access and usability, allowing a fast identification of disruptive mutations. An analysis of 30 genes previously reported to be eroded in mammals, and 30 viable genes from the same lineages, demonstrated that PseudoChecker was able to correctly infer 97% of loss events and 95% of functional genes, confirming its reliability. PseudoChecker is freely available, without login required, at http://pseudochecker.ciimar.up.pt.
Assuntos
Pseudogenes , Software , Animais , Códon , Genômica/métodos , Mutação , Alinhamento de SequênciaRESUMO
The ancestors of Cetacea underwent profound morpho-physiological alterations. By displaying an exclusive aquatic existence, cetaceans evolved unique patterns of locomotor activity, vigilant behaviour, thermoregulation and circadian rhythmicity. Deciphering the molecular landscape governing many of these adaptations is key to understand the evolution of phenotypes. Here, we investigate Cortistatin (CORT), a neuropeptide displaying an important role in mammalian biorhythm regulation. This neuropeptide is a known neuroendocrine factor, stimulating slow-wave sleep, but also involved in the regulation of energy metabolism and hypomotility inducement. We assessed the functional status of CORT in 359 mammalian genomes (25 orders), including 30 species of Cetacea. Our findings indicate that cetaceans and other mammals with atypical biorhythms, thermal constraints and/or energy metabolism, have accumulated deleterious mutations in CORT. In light of the pleiotropic action of this neuropeptide, we suggest that this inactivation contributed to a plethora of phenotypic adjustments to accommodate adaptive solutions to specific ecological niches.
Assuntos
Cetáceos/genética , Ritmo Circadiano , Metabolismo Energético , Evolução Molecular , Neuropeptídeos/genética , Adaptação Fisiológica , Animais , Cetáceos/metabolismo , Cetáceos/fisiologia , Homeostase , PseudogenesRESUMO
In this paper, we study the design aspects of an indoor visible light positioning (VLP) system that uses an artificial neural network (ANN) for positioning estimation by considering a multipath channel. Previous results usually rely on the simplistic line of sight model with limited validity. The study considers the influence of noise as a performance indicator for the comparison between different design approaches. Three different ANN algorithms are considered, including Levenberg-Marquardt, Bayesian regularization, and scaled conjugate gradient algorithms, to minimize the positioning error (εp) in the VLP system. The ANN design is optimized based on the number of neurons in the hidden layers, the number of training epochs, and the size of the training set. It is shown that, the ANN with Bayesian regularization outperforms the traditional received signal strength (RSS) technique using the non-linear least square estimation for all values of signal to noise ratio (SNR). Furthermore, in the inner region, which includes the area of the receiving plane within the transmitters, the positioning accuracy is improved by 43, 55, and 50% for the SNR of 10, 20, and 30 dB, respectively. In the outer region, which is the remaining area within the room, the positioning accuracy is improved by 57, 32, and 6% for the SNR of 10, 20, and 30 dB, respectively. Moreover, we also analyze the impact of different training dataset sizes in ANN, and we show that it is possible to achieve a minimum εp of 2 cm for 30 dB of SNR using a random selection scheme. Finally, it is observed that εp is low even for lower values of SNR, i.e., εp values are 2, 11, and 44 cm for the SNR of 30, 20, and 10 dB, respectively.
Assuntos
Algoritmos , Redes Neurais de Computação , Teorema de Bayes , Análise dos Mínimos Quadrados , LuzRESUMO
In order to detect special nuclear materials and other radioactive materials in Security and Defense scenarios, normally, a combination of neutron and gamma-ray detection systems is used. In particular, to avoid illicit traffic of special nuclear materials and radioactive sources/materials, radiation portal monitors are placed at seaports to inspect shipping-container cargo. Despite their large volume (high efficiency), these detection systems are expensive, and therefore only a fraction of these containers are inspected. In this work, a novel mobile radiation detection system is presented, based on an EJ-200 plastic scintillator for the detection of gamma rays and beta particles, and a neutron detector EJ-426HD plastic scintillator (with 6Li) embedded in a compact and modular moderator. The use of silicon photomultipliers in both detectors presented advantages such as lightweight, compactness, and low power consumption. The developed detection system was integrated in a highly maneuverable multirotor. Monte Carlo simulations were validated by laboratory measurements and field tests were performed using real gamma-ray and neutron sources. The detection and localization within one meter was achieved using a maximum likelihood estimation algorithm for 137Cs sources (4 MBq), as well as the detection of 241Am-beryllium (1.45 GBq) source placed inside the shipping container.
Assuntos
Monitoramento de Radiação , Contagem de Cintilação , Raios gama , Nêutrons , PlásticosRESUMO
Complexes of formula [(H2N2O2)TiCl2] and [(H2N2O2)Ti(OiPr)2] (H2N2O2H2 = HOPh'CH2NH(CH2)2NHCH2Ph'OH, where Ph' = 2,4-(CMe2Ph)C6H2) were synthesized by the reaction of the salan ligand precursor H2N2O2H2 with TiCl4 and Ti(OiPr)4, respectively, in high yields. The dichlorido complex [(H2N2O2)TiCl2] revealed to be an efficient catalyst for the reduction of benzaldehyde in toluene. Full conversion was observed after 24 h at 55 °C in THF. The same catalyst also converted phenylacetaldehyde and hydrocinnamaldehyde into the corresponding alkanes quantitatively.
RESUMO
The textile and clothing industry sector has today a big environmental impact, not only due to the consumption of water and the use of toxic chemicals but also due to the increasing levels of textile waste. One way to reduce the problem is to circularise the, currently linear, textile and clothing value chain, by using discarded clothes as raw material for the production of new clothes, transforming it into a model of circular economy. This way, while reducing the need to produce new raw materials (e.g. cotton), the problem of textile waste produced is also reduced, thus contributing to a more sustainable industry. In this article, we review the current approaches for traceability in the textile and clothing value chain, and study a set of technologies we deem essential for promoting the circular economy in this value chain - namely, the blockchain technology - for registering activities on traceable items through the value chain, and the Internet of Things (IoT) technology, for easily identifying the traceable items' digital twins.
Assuntos
Blockchain , Internet das Coisas , Indústrias , Tecnologia , TêxteisRESUMO
BACKGROUND: Linking Brazilian databases demands the development of algorithms and processes to deal with various challenges including the large size of the databases, the low number and poor quality of personal identifiers available to be compared (national security number not mandatory), and some characteristics of Brazilian names that make the linkage process prone to errors. This study aims to describe and evaluate the quality of the processes used to create an individual-linked database for data-intensive research on the impacts on health indicators of the expansion of primary care in Rio de Janeiro City, Brazil. METHODS: We created an individual-level dataset linking social benefits recipients, primary health care, hospital admission and mortality data. The databases were pre-processed, and we adopted a multiple approach strategy combining deterministic and probabilistic record linkage techniques, and an extensive clerical review of the potential matches. Relying on manual review as the gold standard, we estimated the false match (false-positive) proportion of each approach (deterministic, probabilistic, clerical review) and the missed match proportion (false-negative) of the clerical review approach. To assess the sensitivity (recall) to identifying social benefits recipients' deaths, we used their vital status registered on the primary care database as the gold standard. RESULTS: In all linkage processes, the deterministic approach identified most of the matches. However, the proportion of matches identified in each approach varied. The false match proportion was around 1% or less in almost all approaches. The missed match proportion in the clerical review approach of all linkage processes were under 3%. We estimated a recall of 93.6% (95% CI 92.8-94.3) for the linkage between social benefits recipients and mortality data. CONCLUSION: The adoption of a linkage strategy combining pre-processing routines, deterministic, and probabilistic strategies, as well as an extensive clerical review approach minimized linkage errors in the context of suboptimal data quality.
Assuntos
Confiabilidade dos Dados , Registro Médico Coordenado , Brasil , Bases de Dados Factuais , Humanos , Atenção Primária à SaúdeRESUMO
This paper presents a multi-user Visible Light Communication (VLC)-based Internet of Things (IoT) system using multi band-Carrierless Amplitude and Phase (m-CAP) modulation for IoT applications. The proposed system uses a digital m-CAP modulator embedded in a ceiling LED light fixture and analog receivers, aiming at low-cost, low-power, and small-sized IoT devices. The performance was evaluated in terms of the filtering stage design and the usage of guard bands. Different pairs of emitter and receiver filters were considered. While Bessel and Butterworth analog filters were tested in the analog receiver, the digital m-CAP modulator pulse shaping filter considered raised cosine filters, as well as digital matched filters for the analog Bessel and Butterworth filters. Regarding the guard bands, two approaches were considered: either by using the raised cosine roll-off factor (bandwidth compression) or by suppressing the even bands. The Bit Error Rate (BER) performance was obtained by simulation. The usage of the Bessel filter in the receiver, along with a digital matched filter, proved to be the best solution, achieving a BER lower than 10-3 for an Eb/No of 6 dB, using a third-order filter. Furthermore, guard bands should be used in order to mitigate inter-band interference in order to have improved performance when multiple users intend to simultaneously communicate.
RESUMO
This paper present simulation-based results on the impact of transmitter (Tx) position and orientation uncertainty on the accuracy of the visible light positioning (VLP) system based on the received signal strength (RSS). There are several constraining factors for RSS-based algorithms, particularly due to multipath channel characteristics and set-up uncertainties. The impact of Tx uncertainties on positioning error performance is studied, assuming a statistical modelling of the uncertainties. Simulation results show that the Tx uncertainties have a severe impact on the positioning error, which can be leveraged through the usage of more transmitters. Concerning a smaller Tx's position uncertainty of 5 cm, the average positioning errors are 23.3, 15.1, and 13.2 cm with the standard deviation values of 6.4, 4.1, and 2.7 cm for 4-, 9-, and 16-Tx cases, respectively. While for a smaller Tx' orientation uncertainty of 5°, the average positioning errors are 31.9, 20.6, and 17 cm with standard deviation values of 9.2, 6.3, and 3.9 cm for 4-, 9-, and 16-Tx cases, respectively.