RESUMO
Considering the potential applications of all-polymer solar cells (all-PSCs) as wearable power generators, there is an urgent need to develop photoactive layers that possess intrinsic mechanical endurance, while maintaining a high power-conversion efficiency (PCE).Herein a strategy is demonstrated to simultaneously control the intercalation behavior and nanocrystallite size in the polymer-polymer blend by using a newly developed, high-viscosity polymeric additive, poly(dimethylsiloxane-co-methyl phenethylsiloxane) (PDPS), into the TQ-F:N2200 all-PSC matrix. A mechanically robust 10wt% PDPS blend film with a great toughness was obtained. Our results provide a feasible route for producing high-performance ductile all-PSCs, which can potentially be used to realize stretchable all-PSCs as a linchpin of next-generation electronics.
RESUMO
To determine the role played by the choice of processing solvents in governing the photophysics, microstructure, and charge carrier transport in naphthalenediimide (NDI)-based polymers, we have prepared two new NDI-bithiophene (T2)- and NDI-thienothiophene (TTh)-containing polymers with hybrid siloxane pentyl chains (SiC5) (P(NDI2SiC5-T2) and P(NDI2SiC5-TTh)). Among the various processing solvents studied here, the films prepared using chloroform exhibited far better electron mobilities (0.16 ± 0.1-0.21 ± 0.05 cm(2) V(-1) s(-1)) than the corresponding samples prepared from different solvents, exceeding one order of magnitude higher, indicating the significant influence of the processing solvent on the charge transport. Upon thin-film analysis using atomic force microscopy and grazing incidence X-ray diffraction, we discovered that molecular ordering and orientation are affected by the choice of the processing solvent, which is responsible for the change in the transport characteristics of this class of polymers.
RESUMO
This study presents a DNA-compatible synthesis of diverse 5-arylimidazo[1,2-a]pyridin-3-amine derivatives using the Suzuki-Miyaura reaction, followed by a Groebke-Blackburn-Bienaymé (GBB) reaction. The GBB reaction demonstrates a wide substrate scope, mild one-pot reaction conditions, and compatibility with subsequent enzymatic ligation, highlighting its potential in DNA-encoded library technology.
Assuntos
Aminas , DNA , Ciclização , Biblioteca Gênica , Piridinas/síntese química , Piridinas/químicaRESUMO
Since neurons have temperature sensitive properties, gold nanorod (GNR)-mediated photothermal stimulation has been developed as a neuromodulation application. As an in vitro photothermal platform, GNR-layer was integrated with substrates to effectively apply heat stimulation to the cultured neurons. However, identifying optimal laser power for a targeted temperature on the substrate requires the consideration of thermal properties of the GNR-coated substrates. In this report, we suggest a simple numerical method to determine incident laser power on the substrates for a targeted temperature.
Assuntos
Temperatura Alta , Nanotubos , Ouro , Lasers , LuzRESUMO
Objective.Photothermal neural stimulation has been developed in a variety of interfaces as an alternative technology that can perturb neural activity. The demonstrations of these techniques have heavily relied on open-loop stimulation or complete suppression of neural activity. To extend the controllability of photothermal neural stimulation, combining it with a closed-loop system is required. In this work, we investigated whether photothermal suppression mechanism can be used in a closed-loop system to reliably modulate neural spike rate to non-zero setpoints.Approach. To incorporate the photothermal inhibition mechanism into the neural feedback system, we combined a thermoplasmonic stimulation platform based on gold nanorods (GNRs) and near-infrared illuminations (808 nm, spot size: 2 mm or 200µm in diameter) with a proportional-integral (PI) controller. The closed-loop feedback control system was implemented to track predetermined target spike rates of hippocampal neuronal networks cultured on GNR-coated microelectrode arrays.Main results. The closed-loop system for neural spike rate control was successfully implemented using a PI controller and the thermoplasmonic neural suppression platform. Compared to the open-loop control, the target-channel spike rates were precisely modulated to remain constant or change in a sinusoidal form in the range below baseline spike rates. The spike rate response behaviors were affected by the choice of the controller gain. We also demonstrated that the functional connectivity of a synchronized bursting network could be altered by controlling the spike rate of one of the participating channels.Significance.The thermoplasmonic feedback controller proved that it can precisely modulate neural spike rate of neural activityin vitro. This technology can be used for studying neuronal network dynamics and might provide insights in developing new neuromodulation techniques in clinical applications.
Assuntos
Ouro , Neurônios , Hipocampo , Raios Infravermelhos , Microeletrodos , Neurônios/fisiologiaRESUMO
Thermoplasmonic effect-based neural stimulation has been suggested as an alternative optical neural stimulation technology without genetic modification. Integration of near-infrared light with plasmonic gold nanoparticles has been demonstrated as a neuromodulation tool on in vitro neuronal network models. In order to further test the validity of the thermoplasmonic neural stimulation across multiple biological models (in vitro, ex vivo, and in vivo) avoiding genetic modification in optical neuromodulation, versatile engineering approaches to apply the thermoplasmonic effect would be required. In this work, we developed a gold nanorod attached optical fiber technology for the localized neural stimulation based on a thermoplasmonic effect. A simple fabrication process was developed for efficient nanoparticle coating on commercial optical fibers. The thermoplasmonic optical fiber proved that it can locally modulate the neural activity in vitro. Lastly, we simulated the spatiotemporal temperature change by the thermoplasmonic optical fiber and analyzed its applicability to in vivo animal models.
Assuntos
Nanopartículas Metálicas , Nanotubos , Animais , Ouro , Neurônios , Fibras ÓpticasRESUMO
Operational stability and high performance are the most critical issues that must be addressed in order to propel and advance the current polymer solar cell (PSC) technology to the next level, such as manufacturing and mass production. Herein, we report a high power conversion efficiency (PCE) of 11.2%, together with an excellent device stability in PTB7-Th:PC71BM-based PSCs in the inverted structure by introducing the n-type P(NDI2OD-T2) macromolecular additive (>75% PCE retention at high temperature up to 120 °C, >97% PCE retention after 6 months in inert conditions, >93% PCE retention after 2 months in air with encapsulation, and >80% PCE retention after 140 h in air without encapsulation). The PCE is the highest value ever reported in the single-junction systems based on the PTB7 family and is also comparable to the previously reported highest PCE of inverted PSCs. These promising results are attributed to the efficient optimization and stabilization of the blend film morphology in the photoactive layer, achieved using the P(NDI2OD-T2) additive. From the perspective of manufacturing, our studies demonstrate a promising pathway for fabricating low-cost PSCs with high efficiency as well as long-term stability.