To Study the Effectiveness of Inhalation Technique Training in Patients with COPD and Asthma.

INTRODUCTION: Asthma and chronic obstructive pulmonary disease (COPD) are characterized by chronic airway inflammation. Lack of knowledge about the correct inhalation techniques leads to poor control of both diseases. This study aimed to study the effectiveness of inhalation technique training in patients with COPD and asthma. MATERIALS AND METHODS: A total of 132 patients fulfilling the inclusion criteria were trained with the correct technique of inhalation on day 0 and at the end of 1 and 6 months. Evaluation of technique training was done on these three occasions posttraining. The mean score of devices was obtained, and the mean inhalation technique score of various devices was compared. RESULTS: Out of 132 patients, 65.1% (86/132) patients were using a dry powdered inhaler (DPIs), 26.5% (35/132) patients used metered dose inhalers (MDIs), and 8.4% (11/132) patients used MDI with spacer. The mean scores of patients using MDI at baseline were 5.68 ± 0.83, and after 1 month, 6.68 ± 0.58 (p < 0.000). The inhalation technique mean score of MDI improved after 6 months, 7.02 ± 0.56 as compared to baseline (p < 0.008) mean score of the patients using DPIs improved after 1 month, 5.53 ± 0.58 as compared to baseline 4.37 ± 5.53 (p < 0.000). There was no statistical improvement in the device mean score of DPIs after 6 months, 5.62 ± 0.55 when compared with 1 month, 5.53 ± 0.58 (p < 0.117). Patients who used pressurized metered-dose inhalers (pMDI) with spacers improved their inhalation score after 1 month by 6.90 ± 0.94 as compared to the baseline score of 6.90 ± 0.94 (p < 0.001). The mean score decreased marginally after 6 months, 7.818 ± 0.60, as compared to the score at the end of 1 month of 8.27 ± 0.64 (p < 0.053). DISCUSSION: Patients showed improvement in the technique of inhalation after educational training, reinstructions, and a standard checklist.

Shrinkage Compensation and Effect of Building Orientation on Mechanical Properties of Ceramic Stereolithography Parts.

Stereolithography additive manufacturing (SLA-AM) can be used to produce ceramic structures by selectively curing a photosensitive resin that has ceramic powder in it. The photosensitive resin acts as a ceramic powder binder, which is burned, and the remaining ceramic part is sintered during post-processing using a temperature-time-controlled furnace. Due to this process, the ceramic part shrinks and becomes porous. Moreover, additive manufacturing leads to the orthotropic behavior of the manufactured parts. This article studies the effect of the manufacturing orientation of ceramic parts produced via SLA-AM on dimensional accuracy. Scaled CAD models were created by including the calculated shrinkage factor. The dimensions of the final sintered specimens were very close to the desired dimensions. As sintering induces porosity and reduces the mechanical strength, in this study, the effect of orientation on strength was investigated, and it was concluded that the on-edge specimen possessed by far the highest strength in terms of both compression and tension.

Pattern of InhA and KatG mutations in isoniazid monoresistant Mycobacterium tuberculosis isolates.

AIMS AND OBJECTIVES: The aim of the study is to detect the pattern of genetic mutation, i.e., Inh A or Kat G or both (Inh A and kat G) in isoniazid (INH) monoresistant mycobacteria and to correlate with the pattern in multidrug-resistant (MDR) isolates. MATERIALS AND METHODS: In this study, a quantitative research approach was used. The research design was descriptive observational study. The study was conducted at the Department of Respiratory Medicine, JLN Medical College, Ajmer, Rajasthan, and Intermediate Referral Laboratory, State TB Demonstration Centre, Ajmer. A total of 298 samples found to have resistant strains of Mycobacterium tuberculosis were enrolled with purposive sampling. RESULTS: The mean age of patients was 40.27 ± 13.82 years. There were 250 (83.9%) males, while 48 (16.1%) were females. One hundred ninety-two (64.4%) were resistant for INH only, while the rest were resistant to both INH as well as rifampicin (MDR-tuberculosis). The most common mutation in INH monoresistance was kat G (125; 65.1%) as compared to inh A (54; 28.1%) and both inh A and kat G (13; 6.7%). Among kat G mutations, the most common gene pattern was the absence of WT (S315T) and the presence of MUT1 (S315T1). CONCLUSION: Knowledge about mutation patterns of different INH resistant strains is important in the present era where there is a provision of separate regimens for INH monoresistant TB. Since these mutations are very closely related to high- or low-degree resistance to INH, the therapeutic regimens cannot be generalized.

Thin film metal coated fiber optic hydrophone probe.

Our purpose is to improve the performance sensitivity of a fiber sensor used as a fiber optic hydrophone probe (FOHP) by the addition of nanoscale thin film gold coating. The fiber is designed to provide a uniform and spatial averaging free response up to 100 MHz by etching down to an active diameter of approximately 9 mum. The performance sensitivity of straight cleaved (i.e., full size core and cladding) uncoated, tapered uncoated, and tapered thin film gold-coated fiber sensors was compared in the frequency range from 1.5 to 20 MHz in the presence of acoustic amplitude pressure levels as high as 6 MPa. An unprecedented voltage sensitivity of -245 dB relative to 1 V/muPa (560 mV/MPa) was measured for a thin film gold-coated FOHP by optimizing the gold coating thickness.

Diagnosis and management options in malignant pleural effusions.

Malignant pleural effusion (MPE) denotes an advanced malignant disease process. Most of the MPE are metastatic involvement of the pleura from primary malignancy at lung, breast, and other body sites apart from lymphomas. The diagnosis of MPE has been traditionally made on cytological examination of pleural fluid and/or histological examination of pleural biopsy tissue that still remains the initial approach in these cases. There has been tremendous advancement in the diagnosis of MPE now a day with techniques i.e. characteristic Ultrasound and computed tomography features, image guided biopsies, fluorodeoxyglucose-positron emission tomography imaging, thoracoscopy with direct biopsy under vision, tumor marker studies and immunocytochemical analysis etc., that have made possible an early diagnosis of MPE. The management of MPE still remains a challenge to pulmonologist and oncologist. Despite having various modalities with better tolerance such as pleurodesis and indwelling pleural catheters etc., for long-term control, all the management approaches remain palliative to improve the quality of life and reduce symptoms. While choosing an appropriate management intervention, one should consider the clinical status of the patient, life expectancy, overall cost, availability and comparative institutional outcomes, etc.

Comparative study of clinico-bacterio-radiological profile and treatment outcome of smokers and nonsmokers suffering from pulmonary tuberculosis.

INTRODUCTION: Tuberculosis (TB) is one of the leading causes of death and disease worldwide. Tobacco smoking has been linked as a risk factor for TB. This study was aimed to affirm the strength of association between smoking and pulmonary TB. MATERIALS AND METHODS: Pulmonary TB patients aged between 18 and 65 years were enrolled and followed-up until treatment completion. Two consecutive sputum smears were examined from each patient for the presence of acid-fast bacilli (AFB) using Ziehl-Neelsen technique. Radiological severity of disease was assessed using guidelines of National TB Association of USA. Sputum smears for AFB were graded for positivity as per WHO Revised National TB Control Programme criteria. Response was determined in terms of sputum conversion at the end of intensive phase and final treatment outcomes. RESULTS: Sputum smear grading of 3+ increased from 12.5% to 68.18% and 66.66% as smoking index increased from <100 to 100-299 and >300 (P < 0.05). In nonsmokers, 79.2% patients had minimal disease while only 4.2% had advanced disease as compared to smokers where 52.4% had moderate disease, 26.2% advanced disease, and 21.4% minimal disease (P < 0.01). Smokers had significantly lower treatment success rate (69%) as against nonsmokers and former smokers (93.8% and 90.9%, respectively, P = 0.001) owing to a higher default rate among smokers (28.5%) than nonsmokers (6.3%) and former smokers (9.1%). CONCLUSION: Smokers during initial presentation, as well as at end of the treatment demonstrate more radiological findings, cavitary disease, and worse sputum AFB smear grading. Smokers also have a poorer treatment success rate largely due to high percentage of default rate thus suggesting noncompliance as a main confounder to treatment success. Focus needs to be made to reduce defaulters which are more common among smokers.

Osteochondroma of condyle: case discussion and review of treatment modalities.

Temporomandibular joint (TMJ) forms a synovial articulation between the condyle and the cranium. It is a complex joint and shows hinge and gliding movements. Unlike other articulating heads, condyle grows with intramembranous ossification. TMJ is subjected to excessive loads throughout life as it supports essential functions such as mastication, deglutition, speech and respiration. Traumatic, neoplastic or non-neoplastic pathologies sometimes necessitate joint replacement therapy. Osteochondroma is one such benign tumour originating from condyle which requires surgical replacement of condyle with prosthesis. Various replacement methods have been designed in the past. Alloplastic grafts have been successfully used in joint replacement surgeries like hip joint, knee joint, etc. This case discussion supports the use of titanium-made condylar prosthesis for long-term functional stability of TMJ.

Evaluating the technique of using inhalation device in COPD and bronchial asthma patients.

BACKGROUND: In asthma management, poor handling of inhalation devices and wrong inhalation technique are associated with decreased medication delivery and poor disease control. The key to overcome the drawbacks in inhalation technique is to make patients familiar with issues related to correct use and performance of these medical devices. The objective of this study was to evaluate and analyse technique of use of the inhalation device used by patients of COPD and Bronchial Asthma. METHODS: A total of 300 cases of BA or COPD patients using different types of inhalation devices were included in this observational study. Data were captured using a proforma and were analysed using SPSS version 15.0. RESULT: Out of total 300 enrolled patients, 247 (82.3%) made at least one error. Maximum errors observed in subjects using MDI (94.3%), followed by DPI (82.3%), MDI with Spacer (78%) while Nebulizer users (70%) made least number of errors (p = 0.005). Illiterate patients showed 95.2% error while post-graduate and professionals showed 33.3%. This difference was statistically significant (p < 0.001). Self-educated patients committed 100% error, while those trained by a doctor made 56.3% error. CONCLUSION: Majority of patients using inhalation devices made errors while using the device. Proper education to patients on correct usage may not only improve control of the symptoms of the disease but might also allow dose reduction in long term.

Osteosarcoma of mandible: Detailed radiographic assessment of a case.

Osteosarcoma (OS) is a malignant connective tissue tumor originating from bone and is the most common primary bone malignancy of long bones but seldom arises in jaw bones. Osteosarcoma of jaws is frequently seen arising in the second and third decade as compared to earlier occurrences in other bones and show a slight predilection for body of mandible. It is a highly malignant tumor with varied radiographic features. We present a case with detailed radiographic assessment using intraoral radiograph, computed tomography (CT), 3-D CT, CT angiography techniques and histological evaluation.

Botryoid odontogenic cyst developing from lateral periodontal cyst: A rare case and review on pathogenesis.

Botryoid odontogenic cyst (BOC) is considered to be a polycystic variant of the lateral periodontal cyst (LPC) as the specimen resembled a cluster of grapes. It is a non-inflammatory odontogenic cyst. The BOCs can be unicystic or multicystic. These cysts have potential to extend in the bone and become multilocular and they have a high recurrence rate. Till now, only 73 cases of BOC have been reported. The pathogenesis of BOC is still debatable. We review different pathogenesis proposed for BOC and discuss a rare case of BOC developing from lining of an abnormally large LPC which showed aggressive behaviour in terms of growth and size.