Use of Blood Powder (Ground and Irradiated) for the Manufacture of Chocolate Agar.

Chocolate agar (CA) is an enriched medium for the isolation and identification of fastidious bacteria. Defibrinated blood is used to manufacture CA, but this expensive product is not always affordable for companies in developing countries. Blood powder (BP) is potentially a cheaper alternative, although its pre-treatment using autoclaving can impair the quality of the media. Therefore, optimization of BP as a substitute for defibrinated blood for CA manufacture deserves further research. CA was manufactured with irradiated BP (dehydrated bovine blood powder) and its physical and microbiological characteristics were compared with those of conventional CA and CA prepared with autoclaved BP. Each medium was seeded with 20-200 CFU of target bacteria using the spiral pouring method. Finally, another medium was prepared using BP pre-treated by grinding and gamma irradiation and its performance assessed. Compared to conventional CA, the medium containing ground and irradiated BP provided a similar CFU count for both fastidious (Neisseria, Haemophilus, Campylobacter, and Streptococcus) and non-fastidious (Moraxella, Staphylococcus, Enterococcus, Klebsiella, and Pseudomonas) species, unlike the medium prepared with BP subjected only to irradiation, which provided a lower growth of fastidious species. Morphology and characteristics of all bacterial colonies were very similar in conventional CA and the new medium, the number of Pseudomonas CFU being higher in the latter. The medium prepared with ground plus irradiated vs. irradiated BP more closely resembled conventional CA, having a browner background. The new CA medium prepared with ground and gamma irradiation-sterilized BP has comparable productivity properties to conventional CA. Therefore, it could be a more practical and economical methodology to facilitate large-scale CA manufacture.

Relevance of Secondary Enrichment in the Detection of Salmonella spp. in Food Samples by qPCR According to DIN 10135.

BACKGROUND: When detecting Salmonella spp. in food samples, unlike with culture-based procedures where there are solid standards, PCR techniques are generally dominated by commercial solutions, often backed by the conformity of reference organizations, and based on rigorous validation studies. The few independent standards that exist are not subject to revision and improvement to the same extent as the manufacturer's methods. Moreover, since commercial networks do not promote them, they are implemented less in everyday practice. The German standard DIN 10135 is an example of this. In this method, before PCR detection, a primary enrichment (16-20 h) followed by a secondary selective enrichment of at least 6 h is needed. Nevertheless, it allows the possibility of only applying the first step if evidence of their correct operation is provided. OBJECTIVE: To evaluate how necessary is the secondary enrichment for DIN 10135 standard. METHODS: Short and complete enrichment steps were compared in the context of the evaluation of the limit of detection for 11 types of food. Additionally, a blind assay was performed with 75 food samples. RESULTS: The data show that a simple primary enrichment may be sufficient and that the second selective enrichment with the tested matrixes would not be strictly essential. The blind study obtained a 98.6% of trueness and precision of 100%. CONCLUSIONS: At least for the end consumer products, a secondary enrichment of 6 h is not necessary for all the products tested. HIGHLIGHTS: In the context of the DIN 10135 standard, the primary enrichment (16-20 h, 37 ± 1°C) can be enough for detecting Salmonella spp.

Polyethersulfone (PES) Filters Improve the Recovery of Legionella spp. and Enhance Selectivity against Interfering Microorganisms in Water Samples.

In the analysis of water samples, the type of filtration membrane material can influence the recovery of Legionella species, although this issue has been poorly investigated. Filtration membranes (0.45 µm) from different materials and manufacturers (numbered as 1, 2, 3, 4, and 5) were compared: mixed cellulose esters (MCEs), nitrocellulose (NC), and polyethersulfone (PES). After membrane filtration of samples, filters were placed directly onto GVPC agar and incubated at 36 ± 2 °C. The highest mean counts of colony-forming units and colony sizes for Legionella pneumophila and Legionella anisa were obtained with PES filters (p < 0.001). All membranes placed on GVPC agar totally inhibited Escherichia coli and Enterococcus faecalis ATCC 19443 and ATCC 29212, whereas only the PES filter from manufacturer 3 (3-PES) totally inhibited Pseudomonas aeruginosa. PES membrane performance also differed according to the manufacturer, with 3-PES providing the best productivity and selectivity. In real water samples, 3-PES also produced a higher Legionella recovery and better inhibition of interfering microorganisms. These results support the use of PES membranes in methods where the filter is placed directly on the culture media and not only in procedures where membrane filtration is followed by a washing step (according to ISO 11731:2017).

BruSIC: a novel selective medium for the primary isolation of Brucella in veterinary samples.

Brucellosis, a re-emerging zoonotic infection, threatens animal welfare and public health with serious economic consequences. A definitive diagnosis requires Brucella isolation by culturing field specimens in specific media. This study aimed to (i) assess the effectivity of recommended Farrell's médium (FM) and CITA medium (CM) for the isolation of four Brucella melitensis strains (16M, Rev1, and the 16MΔwzm and Rev1Δwzm in-frame deletion mutants) with variable susceptibility to polymyxins; (ii) develop a Brucella selective medium (BSM) suitable for these strains; (iii) test BSM, FM, and CM with other Brucella species; and (iv) develop an improved selective culture medium (BruSIC) for all brucellae, including B. abortus bv1. The four B. melitensis strains were strongly inhibited in FM and (except Rev1) CM. Since Rev1Δwzm's CM inhibition was due to a synergistic effect of colistin and vancomycin, we formulated BSM with half the concentrations of both antibiotics, achieving a similar growth of B. melitensis to blood agar base (BAB) and an inhibition of contaminant microorganisms comparable to CM; CM performance was surpassed by BSM for the primary isolation of B. melitensis when tested in 1,789 real sheep samples. For other brucellae, BSM and CM were more inhibitory than FM for B. abortus bv1 when using plates immediately after preparation but not after ≥4 weeks of storage. To address this, we developed the improved solid medium BruSIC by replacing the calf serum in BSM with activated charcoal. BruSIC yielded faster colony growth than BSM and CM and similar CFU numbers than BAB (including for B. ovis in BAB-Serum) and inhibited accompanying microorganisms in sheep and cow samples as effectively as BSM. IMPORTANCE Farrell's medium (FM) and CITA medium (CM), recommended for Brucella isolation in animal samples, are inhibitory for certain strains. A reformulated Brucella selective medium (BSM), containing half the CM vancomycin and colistin concentrations, improved the isolation of B. melitensis, but not Brucella abortus bv1. A novel Brucella selective culture medium (BruSIC), in which calf serum is replaced by activated charcoal, retains the selectivity and improves the productivity of BSM and CM. BruSIC allows the growth of all brucellae faster than in CM or BSM, and at CFU number equivalent to BAB supplemented by calf serum, including B. abortus bv1 and the serum-dependent Brucella ovis. Due to its performance and reduced cost, BruSIC represents an added-value alternative to the existing selective culture media for these bacteria.

GVPC Medium Manufactured without Oxygen Improves the Growth of Legionella spp. and Exhibits Enhanced Selectivity Properties.

Glycine-vancomycin-polymyxin-cycloheximide agar (GVPC) is a recommended medium for the detection of Legionella spp. in water samples. However, its quality could be improved in terms of recovery of Legionella spp. and selectivity properties. Modifications were introduced in GVPC manufacture: autoclaving conditions (115°C, 15 min) and atmosphere during component-stirring (removal of oxygen and N2 injection). The use of softer autoclaving conditions (115°C, 15 min) improved the growth of Legionella anisa by the spiral method and Legionella pneumophila after membrane filtration. The medium manufactured with O2 removal and autoclaving for 15 min at 115°C allowed a faster growth of L. pneumophila (colonies visible at day 2) and a notable increase of L. anisa growth (colonies appearing at day 3, and statistically significant numbers of CFU at day 5). After 3 to 5 days of incubation, the improved media showed higher selectivity properties, particularly for Enterococcus faecalis ATCC 29212 and Pseudomonas aeruginosa ATCC 9027. A further improvement was achieved by the addition of N2 during ingredient stirring, leading to a statistically significant faster growth of L. pneumophila at days 2 and 3 and L. anisa at day 3. Selectivity properties were also enhanced, resulting in the complete inhibition of both E. faecalis strains and Escherichia coli and complete-partial inhibition of P. aeruginosa. Oxygen removal during GVPC manufacture using a vacuum pump system promotes the growth of L. pneumophila and L. anisa, and markedly inhibits the growth of E. coli, P. aeruginosa, and E. faecalis. IMPORTANCE Currently, GVPC is a recommended medium for the detection of Legionella spp. in water samples. However, recovery of Legionella spp. and selectivity properties can be improved. GVPC medium manufactured without oxygen improved the growth of Legionella pneumophila and Legionella anisa. Oxygen removal during GVPC manufacture also improved selectivity properties. A further improvement was achieved by the addition of N2 during ingredient stirring, leading to a faster growth of L. pneumophila at days 2 and 3 and L. anisa at day 3 and enhancement of selectivity properties. The introduction of the modified GVPC medium in routine practice can allow a better detection of Legionella spp. in water samples.