Effect of nitrogen limitation on enrichment of activated sludge for PHA production.

Polyhydroxyalkanoates (PHA) are good candidates to plastics because of their material properties similar to conventional plastics and complete biodegradability. The use of activated sludge can be a cheaper alternative to pure cultures for PHA production. In this study, effect of nitrogen limitation during acclimatization period of biomass on production of polyhydroxyalkanoate was investigated. Activated sludge was selected in two sequencing batch reactors operated with and without nitrogen limitation. Batch tests were performed to examine polymer productions of activated sludges acclimatized to different nitrogen regimes. Responses of biomass to different organic loading rates, organic acids, and carbon to nitrogen (C/N) ratios were studied by determining specific polymer storage rate, polymer storage yield, and sludge polymer content of biomasses. Results obtained from batch experiments showed that concentrations of polymer accumulated by two different sludges increased directly with initial substrate concentration. Observed highest polymer yields for the biomasses enriched with and without nitrogen deficiency were 0.69 g COD PHA g(-1) COD S and 0.51 g COD PHA g(-1) COD S, and corresponding polymer contents of biomasses were 43.3% (g COD PHA g(-1) COD X) and 38.3% (g COD PHA g(-1) COD X), respectively. Polymer yields for both biomasses decreased with substrate shift however, biomass enriched with nitrogen deficiency adapted well to acetate-propionate mixture. The results presented in this study showed that polymer storage ability of biomass was improved more under dynamic conditions with nitrogen deficiency when compared to that without nitrogen deficiency. Limiting ammonia availability during batch experiments also caused higher polymer production by suppressing growth, as well as during enrichment of biomass.

Trace metals solubility in rainwater: evaluation of rainwater quality at a watershed area, Istanbul.

In this study, 79 bulk precipitation samples were collected at two sampling sites near Büyükçekmece Lake, one of the important drinking water sources of Istanbul, for the period of October 2001 to July 2002. The study comprised the determination of trace and toxic metals concentrations in rain water. The concentrations of the metals in this study were found to be higher than those reported by other researchers around the world. The solubility of toxic metals was found in the order of Cd>Cu>V>Zn>Ni>Pb>Cr. Solubility of metals under acidic conditions (pH<5.5) was approximately five times higher than those under neutral conditions with Cd as the most soluble metal (50% soluble). Statistical evaluations including seasonal variations, crustal enrichment factors, and correlation matrix were discussed to identify the possible sources of these pollutants. The study revealed that anthropogenic elements were highly enriched especially for Cd>Cu>Pb which were found to be highly enriched. Significant portion of Cu and Pb could be increased by the effect of local sources like cement industry in the area; however, the rest of the investigated trace metals could be brought to the sampling site by long-range transport to the Büyükçekmece Lake watershed area.