Examining the role of magnetic fields in plasma behavior and surface evolution of a Mg alloy with varied irradiances in a femtosecond laser treatment.

This paper reports the effect of a magnetic field on plasma parameters and surface structuring of the Mg alloy after laser irradiation. Femtosecond pulses of a Ti:sapphire laser system (800 nm, 35 fs, 1 KHz) are employed as the source of irradiation at various irradiances ranging from 0.011P W/c m 2 to 0.117P W/c m 2 to generate ablated Mg-alloy plasma. A transvers magnetic field (TMF) of strength 1.1 Tesla is employed to confine laser generated Mg plasma. All the measurements are performed with and without TMF. The two plasma parameters, i.e., excitation temperature (T e x c ) and electron number density (n e) of Mg plasma, have been evaluated by laser-induced breakdown spectroscopy (LIBS) analysis. It is observed that the values of T e x c and n e of laser produced plasma (LPP) of the Mg alloy are higher in the presence of a magnetic field as compared to the field free case. Both show initially an increasing trend with increasing laser irradiance and after attaining their respective maxima a decreasing trend is observed with the further increase of irradiance. The magnetic confinement validity is confirmed by analytically evaluating thermal beta (ß t), directional beta (ß d), confinement radius (R b), and diffusion time (t d) for LPP of the Mg alloy. To correlate the LPP parameters of the Mg alloy with surface modifications a field emission scanning electron microscope (FE-SEM) analysis is performed. It was revealed that structures like laser-induced periodic surface structures (LIPSSs), agglomerates, islands, large sized bumps, along with channels and multiple ablative layers are observed. Distinct and well-defined surface structuring is observed in the presence of TMF as compared to the field free case. It is concluded that by applying an external magnetic field during laser irradiation, controlled material surface structuring is possible for fabrication of nanogratings and field emitters where spatial uniformity is critically important.

A simple, sensitive, label-free electrochemical immunosensor based on the chitosan-coated silver/cerium oxide (CS@Ag/CeO2) nanocomposites for the detection of alpha-fetoprotein (AFP).

Metal oxide-based sensors have the benefit of inexpensive, quick response, and high sensitivity in detecting specific biological species. In this article, a simple electrochemical immunosensor was fabricated using antibody-chitosan coated silver/cerium oxide (Ab-CS@Ag/CeO2) nanocomposites on a gold electrode for sensitive alpha-fetoprotein (AFP) diagnosis in human serum samples. Successfully synthesis of AFP antibody-CS@Ag/CeO2conjugates was confirmed through Fourier transform infrared spectra of the prototype. The amine coupling bond chemistry was then used to immobilize the resultant conjugate on a gold electrode surface. It was observed that the interaction of the synthesized Ab-CS@Ag/CeO2nanocomposites with AFP prevented an electron transfer and reduced the voltammetric Fe(CN)63-/4-peak current, which was proportional to the amount of AFP. The linear ranges of AFP concentration were found from 10-12-10-6g.ml-1. The limit of detection was calculated using the calibration curve and came out to be 0.57 pg.ml-1. The designed label-free immunosensor successfully detected AFP in human serum samples. As a result, the resulting immunosensor is a promising sensor plate form for AFP detection and could be used in clinical bioanalysis.

Nanosecond Laser Induced Surface Structuring of Cadmium after Ablation in Air and Propanol Ambient.

In the present study KrF Excimer laser has been employed to irradiate the Cadmium (Cd) targets for various number of laser pulses of 500, 1000, 1500 and 2000, at constant fluence of 3.6 J cm-2. Scanning Electron Microscopy (SEM) analysis was utilized to reveal the formation of laser induced nano/micro structures on the irradiated target (Cd) surfaces. SEM results show the generation of cavities, cracks, micro/nano wires/rods, wrinkles along with re-deposited particles during irradiation in air, whereas subsurface boiling, pores, cavities and Laser Induced Periodic Surface Structures (LIPSS) on the inner walls of cavities are revealed at the central ablated area after irradiation in propanol. The ablated volume and depth of ablated region on irradiated Cd targets are evaluated for various number of pulses and is higher in air as compared to propanol ambient. Fast Fourier Transform Infrared spectroscopy (FTIR), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (XRD) analyses show the presence of oxides and hydro-oxides of Cd after irradiation in propanol, whereas the existence of oxides is observed after irradiation in air ambient. Nano-hardness tester was used to investigate mechanical modifications of ablated Cd. It reveals an increase in hardness after irradiation which is more pronounced in propanol as compared to air.

Laser-induced breakdown spectroscopy of aluminum plasma in the absence and presence of magnetic field.

The effect of magnetic field on laser-induced breakdown spectroscopy of aluminum (Al) plasma has been investigated. Al targets were exposed to Nd:YAG laser pulses at different irradiances ranging from 1 GWcm-2 to 2.7 GWcm-2, under argon (Ar) and neon (Ne) environments at various pressures ranging from 5 torr to 760 torr and at different time delays from 0.42 µs to 9.58 µs. All spectroscopy measurements were performed in the absence and presence of transverse magnetic field of strength 0.9 tesla. When laser irradiance is increased by keeping the pressure (10 torr) and time delay constant (1.25 µs), both excitation temperature (Te) and number density (ne) increase up to certain values. The same trend is observed for Te and ne when the ambient gas pressure of Ar and Ne is increased by keeping the irradiance (1.7 GWcm-2) and time delay constant. At higher irradiances and pressures, saturation is observed, which is attributed to the self-regulating regime of plasma. In the case of time delay, both electron temperature and number density decay exponentially, which is according to the adiabatic expansion model. It is revealed that emission intensity and electron temperature are higher in the presence of magnetic field as compared to the field-free case, which is attributed to magnetic confinement, as well as the joule heating effect. Plasma plume confinement is confirmed by analytical evaluation factor ß. ß is an analytical factor that is the ratio of plasma pressure to magnetic pressure, i.e., ß=Plasma pressureMagnetic pressure. It confirms the validity of magnetic field confinement if ß is less than 1. As the evaluated values of ß are less than 1 for all cases, they confirm the validity of magnetic confinement.

Laser-induced breakdown spectroscopy analysis of human deciduous teeth samples.

Laser-induced breakdown spectroscopy (LIBS) analysis of human deciduous teeth has been performed by employing Nd:YAG laser (1064 nm, 10 ns) for the evaluation of plasma parameters as well as elemental analysis. The plasma parameters, i.e., electron temperature and electron number density of laser-induced teeth plasma at various fluencies, have been evaluated. Both parameters show an increasing trend up to a certain value of laser fluence, i.e., 2.6 J/cm(2). With further increase in laser fluence up to a value of 3.9 J/cm(2), a decreasing trend is observed which is due to shielding effect. With further increase in laser fluence up to a maximum value of 10.5 J/cm(2), the insignificant changes in plasma parameters are observed which are attributed to saturation phenomenon governed by self-regulating regime. Emission spectroscopy results exhibit that laser fluence is the controlling factor for both plasma parameters. The elemental analysis was also performed at constant laser fluence of 2.6 J/cm(2) by evaluating the variation in detected elemental concentration of Ca, Fe, Sr, Zn, and Pb in three different parts of human teeth, i.e., enamel, dentine, and cementum. The lower concentration of Ca as compared to the standard values of CaCO3 (self-fabricated pellet) reveals that enamel is the most deciduous part of the human teeth. However, at the same time, it is also observed that the highest concentration of micro minerals is also found in enamel, then in dentine, and lowest in cementum. Carious or unhealthy tooth is identified by enhanced concentration of micro minerals (Pb, Sr, Zn, and Fe). The highest concentration of micro minerals as compared to other parts of teeth (dentine and root cementum) and lower concentration of Ca as compared to standard CaCO3 pellet in enamel confirm that enamel is the most deciduous part of the teeth.

Molecular alterations of PIK3CA in uterine carcinosarcoma, clear cell, and serous tumors.

OBJECTIVES: Type II endometrial carcinomas-uterine carcinosarcomas or uterine malignant mesodermal mixed tumors (UMMMTs), clear cell carcinomas (UCCs), and uterine serous carcinomas (USCs)-are aggressive malignancies that present with advanced disease and have high mortality rates. PIK3CA mutations are commonly found in endometrial cancers. The objective of the study was to characterize molecular alterations in the PIK3CA gene in these tumors. METHODS: A total of 84 cases (20 UMMMTs, 18 UCCs, and 46 USCs) were selected from the surgical pathology files of Weill Cornell Medical College and Johns Hopkins Hospital. The diagnoses were confirmed by gynecologic pathologists (L.H.E. and A.Y.). DNA was extracted from paraffin-embedded tissue. Polymerase chain reaction was performed for mutational analysis. All the studies were performed in accordance with approved Institutional Review Board protocols. RESULTS: Mutations in the PIK3CA gene were identified in 3 (15%) of 20 UMMMT, 3 (16.7%) of 18 UCC, and 10 (21.7%) of 46 USC cases. We report novel mutations in PIK3CA in uterine carcinosarcoma. CONCLUSIONS: A significant percentage of UMMMTs, UCCs, and USCs have mutations in PIK3CA. Further investigation is needed to develop targeted therapies for these aggressive uterine cancers.

Peritoneal Malignant Mesothelioma Metastasizing to Lymph Node in Young Male-a Case Report.

Peritoneal malignant mesothelioma is an uncommon neoplasm with a poor prognosis. We hereby report a case of a 20-year-old male, first diagnosed on biopsy with axillary lymph node metastasis. He presented with abdominal pain and axillary lymphadenopathy, with no history of asbestos exposure. CECT showed peritoneal thickening and ascites. Ascitic fluid cytology showed reactive morphology. The diagnosis of metastatic deposits of malignant mesothelioma was made on histopathology and confirmed by immunohistochemistry. Tumor cells were immune-reactive for CK 5/6, calretinin, D2-40, and WT1 and negative for TTF1, CK 20, and CD 3. This case report has two important highlights-(i) unusual presentation with axillary lymph node metastasis leading to diagnostic dilemma in a young male with no asbestos exposure history and (ii) confirmatory diagnostic role of IHC in Peritoneal malignant mesothelioma.

Development of Versatile, thermally stable, flexible, UV-resistant and antibacterial polyvinyl alcohol-Nanodiamonds composite for efficient food packaging.

This research paper reports an enhancement of thermal, optical, mechanical and antibacterial activities of the Polyvinyl alcohol-Nanodiamonds (PVA-NDs) composite required for the food packaging industry. The synthesis of composites was done by the wet processing method. The large surface area of NDs facilitated the robust interaction between the hydroxyl group and macromolecular chains of PVA to enhance the hydrogen bonding of PVA with NDs rather than PVA molecules. Thus, a reduction in PVA diffraction peak intensity was reported. NDs improved the thermal stability by preventing the out-diffusion of volatile decomposition products of PVA. The results also revealed an enhancement in tensile strength (∼60 MPa) and ductility (∼180 %). PVA-NDs composite efficiently blocked the UVC (100 %), most of the part of the UVB (∼85 % above 300 nm), and UVA (∼58 %). Furthermore, enhanced antibacterial activities were reported for PVA-NDs composite against E. coli and S. aureus. NDs accumulated around the bacterial cells prevented essential cellular functions and led to death. Hence, this composite could be a promising candidate for safe, thermally stable, strong, flexible, transparent, UV- resistant antibacterial food packaging material.

Abatement of Aerosols by Ionic Wind Extracted From Dielectric Barrier Discharge Plasma.

Lahore (Pakistan), being an industrial city, has high emission of aerosols that affects and contaminates the air quality. Therefore, the abatement/inactivation of aerosols is necessary to restrict their infectious activities. In this project, ionic wind isolated from dielectric barrier discharge plasma (DBD plasma) has been utilized to abate the aerosols trapped in the Surgical Mask and KN95 Respirator. To infer the chemical and elemental detection of ambient aerosols, FTIR and LIBS have been employed. "From the results, it is noteworthy that abatement/removal of aerosols has been successfully carried out by the ionic wind irradiation and highlights the potential of DBD plasma technology in removing the aerosols pollution."

Utilization and safety of sodium hyaluronate-carboxymethylcellulose adhesion barrier.

BACKGROUND: Little is known about the use and toxicity of antiadhesion substances such as sodium hyaluronate-carboxymethylcellulose. OBJECTIVE: We analyzed the patterns of use and safety of sodium hyaluronate-carboxymethylcellulose in patients undergoing colectomy and gynecologic surgery. DESIGN: This is a retrospective cohort study. SETTING: This study covered hospitals nationwide. PATIENTS: All patients in the Premier Perspective database who underwent colectomy or hysterectomy from 2000 to 2010 were included in the analyses. MAIN OUTCOME MEASURE: Hyaluronate-carboxymethylcellulose use was determined by billing codes. For the primary outcome, we used hierarchical mixed-effects logistic regression models to determine the factors associated with the use of hyaluronate-carboxymethylcellulose, whereas a propensity score-matched analysis was used to secondarily assess the association between hyaluronate-carboxymethylcellulose use and toxicity (abscess, bowel and wound complications, peritonitis). RESULTS: We identified 382,355 patients who underwent hysterectomy and 267,368 who underwent colectomy. For hysterectomy, hyaluronate-carboxymethylcellulose use was 5.0% overall, increasing from 1.1% in 2000 to 9.8% in 2010. Hyaluronate-carboxymethylcellulose was used in 8.1% of those who underwent colectomy and increased from 6.2% in 2000 to 12.4% in 2010. The year of diagnosis and procedure volume of the attending surgeon were the strongest predictors of hyaluronate-carboxymethylcellulose use. After matching and risk adjustment, hyaluronate-carboxymethylcellulose use was not associated with abscess formation (1.5% vs 1.5%) (relative risk = 0.97; 95% CI, 0.84-1.12) in those who underwent hysterectomy. A patient receiving hyaluronate-carboxymethylcellulose had a 13% increased risk of abscess (17.4% vs 15.0%) (relative risk = 1.13; 95% CI, 1.08-1.17) after colectomy. LIMITATIONS: This was an observational study. CONCLUSION: Hyaluronate-carboxymethylcellulose use has increased over the past decade for colectomy and hysterectomy. Although there is no association between hyaluronate-carboxymethylcellulose use and abscess following hysterectomy, hyaluronate-carboxymethylcellulose use was associated with a small increased risk of abscess after colectomy.

Advances in formulation and manufacturing strategies for the delivery of therapeutic proteins and peptides in orally disintegrating dosage forms.

Therapeutic proteins and peptides (TPPs) are increasingly favoured above small drug molecules due to their high specificity to the site of action and reduced adverse effects resulting in increased use of these agents for medical treatments and therapies. Consequently, there is a need to formulate TPPs in dosage forms that are accessible and suitable for a wide range of patient groups as the use of TPPs becomes increasingly prevalent in healthcare settings worldwide. Orally disintegrating dosage forms (ODDF) are formulations that can ensure easy-to-administer medication to a wider patient population including paediatrics, geriatrics and people in low-resource countries. There are many challenges involved in developing suitable pharmaceutical strategies to protect TPPs during formulation and manufacturing, as well as storage, and maintenance of a cold-chain during transportation. This review will discuss advances being made in the research and development of pharmaceutical and manufacturing strategies used to incorporate various TPPs into ODDF systems.

An oral pH-responsive Streptococcus agalactiae vaccine formulation provides protective immunity to pathogen challenge in tilapia: A proof-of-concept study.

Intensive tilapia farming has contributed significantly to food security as well as to the emergence of novel pathogens. This includes Streptococcus agalactiae or Group B Streptococcus (GBS) sequence type (ST) 283, which caused the first known outbreak of foodborne GBS illness in humans. An oral, easy-to-administer fish vaccine is needed to reduce losses in fish production and the risk of zoonotic transmission associated with GBS. We conducted a proof-of-concept study to develop an oral vaccine formulation that would only release its vaccine cargo at the site of action, i.e., in the fish gastrointestinal tract, and to evaluate whether it provided protection from experimental challenge with GBS. Formalin-inactivated S. agalactiae ST283, was entrapped within microparticles of Eudragit® E100 polymer using a double-emulsification solvent evaporation method. Exposure to an acidic medium simulating the environment in tilapia stomach showed that the size of the vaccine-loaded microparticles decreased rapidly, reflecting microparticle erosion and release of the vaccine cargo. In vivo studies in tilapia showed that oral administration of vaccine-loaded microparticles to fish provided significant protection from subsequent homologous pathogen challenge with GBS ST283 by immersion compared to the control groups which received blank microparticles or buffer, reducing mortality from 70% to 20%. The high efficacy shows the promise of the vaccine platform developed herein, which might be adapted for other bacterial pathogens and other fish species.

Laser-assisted plasma formation and ablation of Cu in a controlled environment.

In this paper, we explore the surface and mechanical alterations of Cu, as well as the parameters of laser-assisted plasma and ablation. The irradiation source is a Nd: YAG laser with a constant irradiance of 1.0 GW/cm2 (1064 nm, 55 mJ, 10 ns, 10 Hz). Physical parameters such as electron temperature (Te) and electron number density (ne), sputtering yield (yield), ablation depth (depth), surface morphology (morphology), and hardness (Vickers) of laser irradiated Cu are evaluated using instruments such as a Laser Induced Breakdown Spectrometer (LIBS), Quartz Crystal Microbalance (QCM), Optical Emission Microscope (OEM), Scanning Electron Microscope (SEM), and Vicker's hardness tester. These physical characteristics have been studied in relation to changes in pressure (from 10 torr to 100 torr) and the composition of two inert ambient gases (Argon and Neon). Pressures of Ar and Ne are found to enhance the emission intensities of spectral lines of Cu, Te, and ne, as well as the sputtering yield, crater depth, and hardness of laser ablated Cu, to a maximum at 60 torr, after which they decrease with subsequent increases in pressure up to 100 torr. Increases in pressure up to 60 torr are connected with plasma confinement effects and increased collisional frequency, whereas decreases in pressure between 60 and 100 torr are ascribed to shielding effects by the plasma plume. All numbers are also found to be greater in Ar compared to Ne. In Ar, laser-ablated Cu reaches a maximum of 15218 K, 1.83 × 1018 cm-3, 8.59 × 1015 atoms/pulse, 231 m, and 147 HV, whereas in Ne, it reaches a maximum of 12000 K, 1.75 × 1018 cm-3, 7.70 × 1015 atoms/pulse, 200 m, and 116 HV. Ar is more likely than Ne to develop surface features such as craters, distinct melting pools with elevating edges, flakes, cones, etc. It is also shown that there is a significant association between the outcomes, with an increase in Te and ne being responsible for a rise in sputtering yield, ablation depth, surface morphology, and surface hardness. These findings have potential uses in plasma spectroscopy for materials science and in industrial applications of Cu.

Comparative study of microscale and macroscale technique for encapsulation of Calotropis gigantea extract in metal-conjugated nanomatrices for invasive ductal carcinoma.

The encapsulation of plant extract in nanomatrices has limitations due to its adhesion to walls, size control, high cost and long durations that results in low yield. Macroscale and microscale level techniques for development of micro/nanoparticles may impact the encapsulation of plant extract. This study aimed to evaluate the relative efficiency of microscale and macroscale techniques for encapsulation of plant extract, which is not compared yet. Keeping this in view, encapsulation of Calotropis gigantea leaves extract (CaG) was attained in silver-conjugated poliglusam nanomatrices (POL/Ag) to induce apoptosis in invasive ductal carcinoma (IDC) cells. The ethanolic CaG extract was prepared using percolation method and characterized by chemical tests for its active phytochemical compounds. The droplet-based microfluidic system was utilized as microscale encapsulation technique for CaG in nanomatrices at two different aqueous to oil flow rate ratios 1.0:1.5, and 1.0:3.0. Moreover, conventional batch system was utilized as macroscale encapsulation technique consisted of hot plate magnetic stirrer. The prepared nanomatrices were analysed for antioxidant activity using DPPH test and for cytotoxicity analysis using MCF-7 cells. The characteristic peaks of UV-Vis, FTIR and XRD spectrum confirmed the synthesis of CaG(POL/Ag) by both the encapsulation methods. However, microfluidic system was found to be more expedient because of attaining small and uniform sized silver nanoparticles (92 ± 19 nm) at high flow rate and achieving high encapsulation efficiency (80.25%) as compared to the conventional batch method (52.5%). CaG(POL/Ag) nanomatrices found to have significant antioxidant activity (p = 0.0014) against DPPH radical scavenging activity. The CaG(POL/Ag) of the smallest sized formulated by the microfluidic system has also shown the highest cytotoxicity (90%) as compared to batch method (70%) at 80 µg/mL. Our results indicate that the microscale technique using microfluidic system is a more efficient method to formulate size-controlled CaG(POL/Ag) nanomatrices and achieve high encapsulation of plant extract. Additionally, CaG(Pol/Ag) was found to be an efficient new combination for inducing potent (p < 0.0001) apoptosis in IDC cells. Therefore, CaG(Pol/Ag) can be further tested as an anti-cancer agent for in-vivo experiments.

The Impact of 3D Prism Cavity for Enhanced Oil Recovery Using Different Nanomaterials.

Enhanced oil recovery (EOR) has been offered as an alternative to declining crude oil production. EOR using nanotechnology is one of the most innovative trends in the petroleum industry. In order to determine the maximum oil recovery, the effect of a 3D rectangular prism shape is numerically investigated in this study. Using ANSYS Fluent software(2022R1), we develop a two-phase mathematical model based on 3D geometry. This research examines the following parameters: flow rate Q = 0.01-0.05 mL/min, volume fractions = 0.01-0.04%, and the effect of nanomaterials on relative permeability. The result of the model is verified with published studies. In this study, the finite volume method is used to simulate the problem, and we run simulations at different flow rates while keeping other variables constant. The findings show that the nanomaterials have an important effect on water and oil permeability, increasing oil mobility and lowering IFT, which increases the recovery process. Additionally, it has been noted that a reduction in the flow rate improves oil recovery. Maximum oil recovery was attained at a 0.05 mL/min flow rate. Based on the findings, it is also demonstrated that SiO2 provides better oil recovery compared to Al2O3. When the volume fraction concentration increases, oil recovery ultimately increases.

A numerical investigation of mathematical modelling in 3D hexagonal porous prism on oil recovery using nanoflooding.

The use of nanomaterials as a means of recovering heavy and light oil from petroleum reservoirs has increased over the preceding twenty years. Most researchers have found that injecting a nanoparticle dispersion (nanofluids) has led to good results and increased the amount of oil that can be recovered. In this research, we aim to imitate the three-dimensional hexagonal prism in the existence of SiO2 and Al2O3 nanoparticles for better oil recovery. Porosity (0.1≤φ≤0.4), mass flow rate (0.05mL/min≤Q≤0.05ml/min), nanoparticle concentration (0.01≤ψ≤0.04), and the effect of relative permeability (kr) on oil and water saturation in the presence of gravity under different time durations are all investigated. The result obtained for the model is verified with existing experimental data. The results indicated that the infulence of nanoparticle volume fraction (VF) is significant in enhancing the oil recovery rate. It is also observed that at low porosity values the oil recovery is maximum. The maximum oil recovery is attained at low values of mass flow rate in the 3D hexagonal prism in the presence of silicon and aluminium nanoparticles It is also observed that the use of SiO2 gives a better oil recovery rate than Al2O3. It is also observed that maximum oil recovery is obtained at 99% at a flow rate of 0.05 mL/min in the presence of silicon injection.

Variation in the Performance of MWCNT/ZnO Hybrid Material with pH for Efficient Antibacterial Agent.

In the present work, multiwalled carbon nanotube (MWCNT)/zinc oxide (ZnO) nanoparticles at pH 6.0, 7.0, 8.0, and 10.0 were prepared through the coprecipitation method to improve the antibacterial activity. Morphological, structural, and optical analysis, such as Fourier transform infrared spectroscopy, X-ray diffraction, and field emission scanning electron microscopy, was used to investigate the formation of composites. Analysis revealed that there were variations in morphology from agglomerated structures to rod-like then flower-like structures as pH varied from 6.0 to 10.0. The MWCNT/ZnO composite enhanced the antibacterial activity especially for Staphylococcus aureus as a maximum 20 mm zone of inhibition was observed. The data presented in the present study proves that such composites are an efficient antibacterial agent and suitable for therapy for severe infections.

Study of Micro/Nano Structuring and Mechanical Properties of KrF Excimer Laser Irradiated Al for Aerospace Industry and Surface Engineering Applications.

Micro/nano structuring of KrF Excimer laser-irradiated Aluminum (Al) has been correlated with laser-produced structural and mechanical changes. The effect of non-reactive Argon (Ar) and reactive Oxygen (O2) environments on the surface, structural and mechanical characteristics of nano-second pulsed laser-ablated Aluminum (Al) has been revealed. KrF Excimer laser with pulse duration 20 ns, central wavelength of 248 nm and repetition rate of was utilized for this purpose. Exposure of targets has been carried out for 0.86, 1, 1.13 and 1.27 J·cm-2 laser fluences in non-reactive (Ar) and reactive (O2) ambient environments at a pressure of 100 torr. A variety of characteristics of the irradiated targets like the morphology of the surface, chemical composition, crystallinity and nano hardness were investigated by using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Energy Dispersive X-ray Spectroscopy (EDS), X-ray Diffractometer (XRD), Raman spectroscopy and Nanohardness tester techniques, respectively. The nature (reactive or non-reactive) and pressure of gas played an important role in modification of materials. In this study, a strong correlation is observed between the surface structuring, chemical composition, residual stress variation and the variation in hardness of Al surface after ablation in both ambient (Ar, O2). In the case of reactive environment (O2), the interplay among the deposition of laser energy and species of plasma of ambient gas enhances chemical reactivity, which causes the formation of oxides of aluminum (AlO, Al2O3) with high mechanical strength. That makes it useful in the field of process and aerospace industry as well as in surface engineering.

Kinetic analysis of microcalorimetric data derived from microbial growth: Basic theoretical, practical and industrial considerations.

We report here a mathematical framework for the quantitative interpretation of exponential bacterial growth measured with isothermal microcalorimetry. The method allows determination of many parameters that define the exponential growth phase. To automate the analysis, we also wrote a coding program, so that the approach could be embedded in a commercial setting. As an exemplar, we apply the method to a commercial probiotic product. The outcome was that we could identify characteristic parameters of growth (including rate constant and doubling time), and hence authenticate product quality, within 15 h. This compares favourably with the current 7-10 days required for conventional microbiological assessment (to allow release of product for bottling and marketing) via plating methods. The method would lend itself to growth analysis of single and mixed bacterial cultures.

Reusable, Noninvasive, and Sensitive Fluorescence Enhanced ZnO-Nanorod-Based Microarrays for Quantitative Detection of AFP in Human Serum.

The fabrication of sensitive protein microarrays such as PCR used in DNA microarray is challenging due to lack of signal amplification. The development of microarrays is utilized to improve the sensitivity and limitations of detection towards primal cancer detection. The sensitivity is enhanced by the use of ZnO-nanorods and is investigated as a substrate which enhance the florescent signal to diagnose the hepatocellular carcinoma (HCC) at early stages. The substrate for deposition of ZnO-nanorods is prepared by the conventional chemical bath deposition method. The resultant highly dense ZnO-nanorods enhance the fluorescent signal 7.2 times as compared to the substrate without ZnO-nanorods. The microarray showed sensitivity of 1504.7 ng ml-1 and limit of detection of 0.1 pg ml-1 in wide dynamic range of 0.05 pg-10 µg ml-1 for alpha fetoprotein (AFP) detection in 10% human serum. This immunoassay was successfully applied for human serum samples to detect tumor marker with good recoveries. The ZnO-nanorod substrate is a simple protein microarray which showed a great promise for developing a low-cost, sensitive, and high-throughput protein assay platform for several applications in both fundamental research and clinical diagnosis.