One-Step Synthesis of Biphasic, Cavity-forming Polymer Particles via Dispersion Copolymerization of Styrene and Sulfobetaine Methacrylate.

A one-step dispersion copolymerization technique is demonstrated to fabricate biphasic particles as an approach to streamline the production of particles with complex morphology. The model system studies a monomer feed of hydrophobic styrene and hydrophilic, zwitterionic sulfobetaine methacrylate (SBMA) in a water/isopropanol cosolvent mixture. The resulting particles have a core-shell morphology that can be transformed, simply by washing the particles with water, into particles with a single surface opening connected to an interior cavity. Results indicate that particle morphology is dependent on the presence of nanoscopic SBMA-rich aggregates in the initial reaction mixture to act as nucleation sites, forming an SBMA-rich core encased in a styrene-rich shell. Systematic study of the morphology evolution reveals that the difference in monomer solubility profile can be exploited to control compositional drift of the particle composition during copolymerization yielding copolymer with sufficiently different composition to form phase-separated particle morphology. When SBMA is replaced with various ionic comonomers, the cavity-forming morphology is observed when reaction conditions result in low solubility of the comonomer in the cosolvent mixture. Based on these results, design guidelines are developed that may be applied to a variety of systems requiring complex and responsive particles made from chemically distinct comonomer pairings.

Accessing Thin Film Wetting Regimes during Polymer Growth by Initiated Chemical Vapor Deposition.

We investigate the growth of a fluorinated polymer via initiated chemical vapor deposition onto a suite of isotropic and mesogenic liquids with a range of refractive indices. The polymer morphology at fluid interfaces was found to deviate from conformal films predicted by the positive spreading coefficient, and the resulting morphology is attributed to long-range van der Waals interactions during the deposition process. Experiments systematically vary the deposition conditions and compare the liquid phase (isotropic or nematic) to evaluate the effect of kinetic factors and the liquid substrate phase on the interfacial polymer morphology and spatial organization.

Investigating Time-Dependent Active Motion of Janus Micromotors using Dynamic Light Scattering.

Advances in fabrication methods have positioned Janus micromotors (JMs) as candidates for use as autonomous devices in applications across diverse fields, spanning drug delivery to environmental remediation. While the design of most micromotors is straightforward, the non-steady state active motion exhibited by these systems is complex and difficult to characterize. Traditionally, JM active motion is characterized using optical microscopy single particle tracking for systems confined in 2D. Dynamic light scattering (DLS) offers an alternative high-throughput method for characterizing the 3D active motion in bulk JM dispersions with additional capabilities to quantify time-dependent behavior for a broader range of JM sizes. Here, the active motion of spherical JMs is examined by DLS and it is demonstrated that the method enables decoupling of the translational and rotational diffusion. Systematic studies quantifying the time-dependent diffusive properties as a function of fuel concentration, JM concentration, and time after fuel addition are presented. The analyses presented in this work position DLS to facilitate future advances of JM systems by serving as a fast-screening characterization method for active motion.

Quality-of-Life Discrepancies Among Autistic Adolescents and Adults: A Rapid Review.

IMPORTANCE: Quality of life (QoL) is a core outcome of occupational therapy, but it is decreased among autistic adolescents and adults. This is the first review of QoL from an occupational therapy standpoint. OBJECTIVE: To identify self-reported QoL differences between autistic and nonautistic samples; investigate sex differences in QoL among autistic people; examine consistency in QoL among autistic people across age, intellectual disability (ID), and self- versus proxy-report method; and appraise occupational therapy-related interventions addressing QoL among autistic people. DATA SOURCES: Articles published in peer-reviewed journals between 2010 and 2020, located through Academic Search Ultimate, PubMed, and OTseeker, along with the American Journal of Occupational Therapy, British Journal of Occupational Therapy, Canadian Journal of Occupational Therapy, and Australian Occupational Therapy Journal. Study Selection and Data Collection: Article samples consisted of at least 20% autistic females and used self-reported QoL measures. Qualitative research was excluded, as well as studies with participants younger than age 13 yr. Twenty-seven articles qualified (3 Level 1B, 13 Level 3B, and 11 Level 4). FINDINGS: Autistic adolescents and adults demonstrated decreased self-reported QoL compared with nonautistic peers across age and ID presence. One article compared sex differences in QoL among autistic people. Interventions improved QoL among autistic people. CONCLUSIONS AND RELEVANCE: Autistic adolescents and adults demonstrate decreased QoL in comparison with nonautistic peers. Questions remain related to sex differences in QoL among autistic people, an area for future research. Multiple evidence-based approaches to improve QoL in the autistic population are relevant to occupational therapy practice. What This Article Adds: Self-reported QoL among autistic adolescents and adults is clearly lower than among their nonautistic counterparts. This article provides information on multiple interventions related to occupational therapy to improve QoL among autistic people.

Nematic colloids at liquid crystal-air interfaces via photopolymerization.

We demonstrate the preparation of colloidal crystals at nematic liquid crystal-air interfaces by simultaneous photopolymerization and assembly. Polymer colloids are produced by polymerization-induced phase separation of 2-hydroxyethyl methacrylate in the non-reactive liquid crystal (LC) 4-cyano-4'-pentylbiphenyl (5CB) using an open-cell setup. Colloids adsorbed to the nematic 5CB-air interface form non-close-packed hexagonal crystals that cover the entire interface area. We examine the mechanism of growth and assembly for the preparation of LC-templated interfacial colloidal superstructures.

Association of elevated pre-operative HbA1c and post-operative complications in patients undergoing gynaecological oncology surgery.

HbA1c testing provides average blood glucose control, an elevated result may be associated with adverse post-operative outcomes. Our objective was to evaluate the association between elevated pre-operative HbA1c and post-operative complications in patients undergoing major gynaecological oncology surgery. HbA1c was measured pre-operatively in 364 patients. We identified 65 (16%) patients at risk of developing diabetes with borderline HbA1c measurements.Patients with borderline HbA1c (42-47 mmol/mol) had almost double the incidence of infections compared to patients with normal HbA1c (15.8% vs. 6.5%, p=.038). There were significantly less infections between patients with a normal HbA1c (<42 mmol/mol) and those with an HbA1c of over 42 mmol/mol (6.5% vs. 22.8%, p<.05). There was an association between elevated HbA1c and infective complications especially in patients with a borderline HbA1c. It is suggested that knowing HbA1c status, intervention can be made to prevent post-operative infective complications and improve outcomes.Impact statementWhat is already known on this subject? Obesity is a common risk factor for gynaecological cancer and elevated HbA1c. Chronically elevated HbA1c may lower immunity. An association has been shown previously between elevated HbA1c and post-operative complications.What the results of this study add? This study examined infective complications in patients undergoing gynaecological surgery; showing that patients with a borderline HbA1c (42-47 mmol/mol), especially those with a diagnosis of diabetes to be most at risk. This suggests that pre-operative HbA1c should be used routinely to guide care rather than diabetic status alone to prevent post-operative infections.What the implications are of these findings for clinical practice and/or further research? More research needs to be carried out to find the optimal pre-operative HbA1c targets to reduce post-operative infection rates. Work needs to be done in conjunction with general practitioners to help patients to reduce their HbA1c prior to treatment.

Clickable Janus Particles.

Janus particles are colloidal analogues of molecular amphiphiles that can self-assemble to form diverse suprastructures, exhibit motility under appropriate catalytic reactions, and strongly adsorb to fluid-fluid interfaces to stabilize multiphasic fluid mixtures. The chemistry of Janus particles is the fundamental parameter that controls their behavior and utility as colloid surfactants in bulk solution and at fluid interfaces. To enable their widespread utilization, scalable methods that allow for the synthesis of Janus particles with diverse chemical compositions and shapes are highly desirable. Here, we develop clickable Janus particles that can be modified through thiol-yne click reactions with commercially available thiols. Janus particles are modified to be amphiphilic by introducing either carboxyl, hydroxyl, or amine moieties. We also demonstrate that regulating the extent of the modification can be used to control the particle morphology, and thus the type of emulsion stabilized, as well as to fabricate composite Janus particles through sequential click reactions. Modifying Janus particles through thiol-yne click chemistry provides a fast-reacting, scalable synthesis method for the fabrication of diverse Janus particles.

Microstructured Films Formed on Liquid Substrates via Initiated Chemical Vapor Deposition of Cross-Linked Polymers.

We studied the formation of microstructured films at liquid surfaces via vapor phase polymerization of cross-linked polymers. The films were composed of micron-sized coral-like structures that originate at the liquid-vapor interface and extend vertically. The growth mechanism of the microstructures was determined to be simultaneous aggregation of the polymer on the liquid surface and wetting of the liquid on the growing aggregates. We demonstrated that we can increase the height of the microstructures and increase the surface roughness of the films by either decreasing the liquid viscosity or decreasing the polymer deposition rate. Our vapor phase method can be extended to synthesize functional, free-standing copolymer microstructured thin films for potential applications in tissue engineering, electrolyte membranes, and separations.

Compartmentalized mitochondrial ferroptosis converges with optineurin-mediated mitophagy to impact airway epithelial cell phenotypes and asthma outcomes.

A stable mitochondrial pool is crucial for healthy cell function and survival. Altered redox biology can adversely affect mitochondria through induction of a variety of cell death and survival pathways, yet the understanding of mitochondria and their dysfunction in primary human cells and in specific disease states, including asthma, is modest. Ferroptosis is traditionally considered an iron dependent, hydroperoxy-phospholipid executed process, which induces cytosolic and mitochondrial damage to drive programmed cell death. However, in this report we identify a lipoxygenase orchestrated, compartmentally-targeted ferroptosis-associated peroxidation process which occurs in a subpopulation of dysfunctional mitochondria, without promoting cell death. Rather, this mitochondrial peroxidation process tightly couples with PTEN-induced kinase (PINK)-1(PINK1)-Parkin-Optineurin mediated mitophagy in an effort to preserve the pool of functional mitochondria and prevent cell death. These combined peroxidation processes lead to altered epithelial cell phenotypes and loss of ciliated cells which associate with worsened asthma severity. Ferroptosis-targeted interventions of this process could preserve healthy mitochondria, reverse cell phenotypic changes and improve disease outcomes.

Formation of heterogeneous polymer films via simultaneous or sequential depositions of soluble and insoluble monomers onto ionic liquids.

In this paper, we studied the formation of heterogeneous polymer films on ionic liquid (IL) substrates via the simultaneous or sequential depositions of monomers that are either soluble or insoluble in the liquid. We found that the insoluble monomer 1H,1H,2H,2H-perfluorodecyl acrylate (PFDA) only polymerizes at the IL surface, while the soluble monomer ethylene glycol diacrylate (EGDA) can polymerize at both the IL surface and within the bulk liquid. The polymer chains that form within the bulk liquid entrap IL as they integrate into the polymer film formed at the IL surface, resulting in heterogeneous films that contain IL on the bottom side. Varying the order in which the soluble and insoluble monomers were introduced into the system led to different film structures. When the insoluble monomer was introduced first, a film formed at the surface and the soluble monomer then diffused through this film and polymerized within the bulk, leading to a sandwich structure. When the soluble monomer was introduced first, a layered film was formed whose structure followed the order in which the monomers were introduced. When the two monomers were introduced simultaneously, the soluble monomer polymerized in the bulk while a copolymer film formed at the surface. This study provides an understanding of how to control the composition of layered polymer films deposited onto IL substrates in order to develop new composite materials for separation and electrochemical applications.

Effect of surface tension, viscosity, and process conditions on polymer morphology deposited at the liquid-vapor interface.

We have observed that the vapor-phase deposition of polymers onto liquid substrates can result in the formation of polymer films or particles at the liquid-vapor interface. In this study, we demonstrate the relationship between the polymer morphology at the liquid-vapor interface and the surface tension interaction between the liquid and polymer, the liquid viscosity, the deposition rate, and the deposition time. We show that the thermodynamically stable morphology is determined by the surface tension interaction between the liquid and the polymer. Stable polymer films form when it is energetically favorable for the polymer to spread over the surface of the liquid, whereas polymer particles form when it is energetically favorable for the polymer to aggregate. For systems that do not strongly favor spreading or aggregation, we observe that the initial morphology depends on the deposition rate. Particles form at low deposition rates, whereas unstable films form at high deposition rates. We also observe a transition from particle formation to unstable film formation when we increase the viscosity of the liquid or increase the deposition time. Our results provide a fundamental understanding about polymer growth at the liquid-vapor interface and can offer insight into the growth of other materials on liquid surfaces. The ability to systematically tune morphology can enable the production of particles for applications in photonics, electronics, and drug delivery and films for applications in sensing and separations.

Engineering the surface patchiness and topography of polystyrene colloids: From spheres to ellipsoids.

HYPOTHESIS: Colloidal surface morphology determines suspension properties and applications. While existing methods are effective at generating specific features on spherical particles, an approach extending this to non-spherical particles is currently missing. Synthesizing un-crosslinked polymer microspheres with controlled chemical patchiness would allow subsequent thermomechanical stretching to translate surface topographical features to ellipsoidal particles. EXPERIMENTS: A systematic study using seeded emulsion polymerization to create polystyrene (PS) microspheres with controlled surface patches of poly(tert-butyl acrylate) (PtBA) was performed with different polymerization parameters such as concentration of tBA monomer, co-swelling agent, and initiator. Thermomechanical stretching converted seed spheres to microellipsoids. Acid catalyzed hydrolysis (ACH) was performed to remove the patch domains. Roughness was characterized before and after ACH using atomic force microscopy. FINDINGS: PS spheres with controlled chemical patchiness were synthesized. A balance between two factors, domain coalescence from reduced viscosity and domain growth via monomer absorption, dictates the final PtBA) patch features. ACH mediated removal of patch domains produced either golf ball-like porous particles or multicavity particles, depending on the size of the precursor patches. Patchy microspheres were successfully stretched into microellipsoids while retaining their surface characteristics. Particle roughness is governed by the patch geometry and increases after ACH. Overall, this study provides a facile yet controllable platform for creating colloids with highly adjustable surface patterns.

Nanoscale Porosity in Microellipsoids Cloaks Interparticle Capillary Attraction at Fluid Interfaces.

Anisotropic particles pinned at fluid interfaces tend toward disordered multiparticle configurations due to large, orientationally dependent, capillary forces, which is a significant barrier to exploiting these particles to create functional self-assembled materials. Therefore, current interfacial assembly methods typically focus on isotropic spheres, which have minimal capillary attraction and no dependence on orientation in the plane of the interface. In order to create long-range ordered structures with complex configurations via interfacially trapped anisotropic particles, control over the interparticle interaction energy via external fields and/or particle engineering is necessary. Here, we synthesize colloidal ellipsoids with nanoscale porosity and show that their interparticle capillary attraction at a water-air interface is reduced by an order of magnitude compared to their smooth counterparts. This is accomplished by comparing the behavior of smooth, rough, and porous ellipsoids at a water-air interface. By monitoring the dynamics of two particles approaching one another, we show that the porous particles exhibit a much shorter-range capillary interaction potential, with scaling intriguingly different than theory describing the behavior of smooth ellipsoids. Further, interferometry measurements of the fluid deformation surrounding a single particle shows that the interface around porous ellipsoids does not possess the characteristic quadrupolar symmetry of smooth ellipsoids, and quantitatively confirms the decrease in capillary interaction energy. By engineering nanostructured surface features in this fashion, the interfacial capillary interactions between particles may be controlled, informing an approach for the self-assembly of complex two-dimensional microstructures composed of anisotropic particles.

Encapsulation of ionic liquids within polymer shells via vapor phase deposition.

We demonstrate the use of vapor phase deposition to completely encapsulate ionic liquid (IL) droplets within robust polymer shells. The IL droplets were first rolled into liquid marbles using poly(tetrafluoroethylene) (PTFE) particles because the marble structure facilitates polymerization onto the entire surface area of the IL. Polymer shells composed of 1H,1H,2H,2H-perfluorodecyl acrylate cross-linked with ethylene glycol diacrylate (P(PFDA-co-EGDA)) were found to be stronger than the respective homopolymers. Fourier transform infrared spectroscopy showed that the PTFE particles become incorporated into the polymer shells. The integration of the particles increased the rigidity of the polymer shells and enabled the pure IL to be recovered or replaced with other fluids. Our encapsulation technique can be used to form polymer shells onto dozens of droplets at once and can be extended to encapsulate any low vapor pressure liquid that is stable under vacuum conditions.

A systematic review of disease related stigmatization in patients living with prostate cancer.

BACKGROUND: Prostate cancer has been shown to be susceptible to significant stigmatisation, because to a large extent it is concealable, it has potentially embarrassing sexual symptoms and has significant impact on the psychosocial functioning. METHODS: This review included studies that focused on qualitative and/or quantitative data, where the study outcome was prostate cancer and included a measure of stigmatization. Electronic databases (CINAHL, Medline, PubMed, PsycInfo, Cochrane Library, PROSPERO, and the Joanna Briggs Institute) and one database for grey literature Opengrey.eu, were screened. We used thematic analysis, with narrative synthesis to analyse these data. We assessed risk of bias in the included studies using the RoBANS. RESULTS: In total, 18 studies met review inclusion criteria, incorporating a total of 2295 participants. All studies recruited participants with prostate cancer, however four studies recruited participants with other cancers such as breast cancer and lung cancer. Of the 18 studies, 11 studies evaluated perceived or felt stigma; four studies evaluated internalised or self-stigma; three studies evaluated more than one stigma domain. DISCUSSION: We found that patients living with prostate cancer encounter stigmatisation that relate to perception, internalisation, and discrimination experiences. We also identified several significant gaps related to the understanding of prostate cancer stigmatization, which provides an opportunity for future research to address these important public health issues. REGISTRATION: This systematic review protocol is registered with PROSPERO, the international prospective register of systematic reviews in health and social care. Registration number: CRD42020177312.

Children's Utilization of Toys is Moderated by Age-Appropriateness, Toy Category, and Child Age.

Play during childhood is essential to growth and learning. Little is known about whether categories of toys moderate play behaviors at different ages, or how children interact with toys that are simple, appropriate, or complex for their developmental level. Two hundred and forty-three children between the ages of 1 and 8 years, divided into four age groups, played with toys that were targeted to their age group as well as toys aimed at one age group younger and older. Toys fell into nine different categories. Whether children fully utilized each toy was evaluated. Analyses examined how children's utilization of toys was affected by the age-appropriateness of the toy, the category of toy, and the child's age. Considering all age groups and toys, children were less likely to fully utilize toys targeted toward older children than age-appropriate toys, but this effect was moderated by the toy category and the child's age.

Selective detection of crystalline cellulose in plant cell walls with sum-frequency-generation (SFG) vibration spectroscopy.

The selective detection of crystalline cellulose in biomass was demonstrated with sum-frequency-generation (SFG) vibration spectroscopy. SFG is a second-order nonlinear optical response from a system where the optical centrosymmetry is broken. In secondary plant cell walls that contain mostly cellulose, hemicellulose, and lignin with varying concentrations, only certain vibration modes in the crystalline cellulose structure can meet the noninversion symmetry requirements. Thus, SFG can be used to detect and analyze crystalline cellulose selectively in lignocellulosic biomass without extraction of noncellulosic species from biomass or deconvolution of amorphous spectra. The selective detection of crystalline cellulose in lignocellulosic biomass is not readily achievable with other techniques such as XRD, solid-state NMR, IR, and Raman analyses. Therefore, the SFG analysis presents a unique opportunity to reveal the cellulose crystalline structure in lignocellulosic biomass.

Heterogeneous kinetics and pharmacology of synaptic inhibition in the chick auditory brainstem.

Identification of shared features between avian and mammalian auditory brainstem circuits has provided much insight into the mechanisms underlying early auditory processing. However, previous studies have highlighted an apparent difference in inhibitory systems; synaptic inhibition is thought to be slow and GABAergic in birds but to have fast kinetics and be predominantly glycinergic in mammals. Using patch-clamp recordings in chick brainstem slices, we found that this distinction is not exclusively true. Consistent with previous work, IPSCs in nucleus magnocellularis (NM) were slow and mediated by GABA(A) receptors. However, IPSCs in nucleus laminaris (NL) and a subset of neurons in nucleus angularis (NA) had rapid time courses twofold to threefold faster than those in NM. Furthermore, we found that IPSCs in NA were mediated by both glycine and GABA(A) receptors, demonstrating for the first time a role for fast glycinergic transmission in the avian auditory brainstem. Although NM, NL, and NA have unique roles in auditory processing, the majority of inhibitory input to each nucleus arises from the same source, ipsilateral superior olivary nucleus (SON). Our results demonstrate remarkable diversity of inhibitory transmission among the avian brainstem nuclei and suggest that differential glycine and GABA(A) receptor activity tailors inhibition to the specific functional roles of NM, NL, and NA despite common SON input. We additionally observed that glycinergic/GABAergic activity in NA was usually depolarizing and could elicit spiking activity in NA neurons. Because NA projects to SON, these excitatory effects may influence the recruitment of inhibitory activity in the brainstem nuclei.

Copolymer Solid-State Electrolytes for 3D Microbatteries via Initiated Chemical Vapor Deposition.

Reliable integration of thin film solid-state polymer electrolytes (SPEs) with 3D electrodes is one major challenge in microbattery fabrication. We used initiated chemical vapor deposition (iCVD) to produce a series of nanoscale copolymer films comprising hydroxyethyl methacrylate and ethylene glycol diacrylate. Conformal copolymer coatings were applied to a variety of patterned 3D electrodes and subsequently converted into ionic conductors by lithium salt doping. Broad tunability in ionic conductivity was achieved by optimizing the copolymer cross-linking density and matrix polarity, resulting in a room-temperature conductivity of (6.1 ± 2.7) × 10-6 S cm-1, the highest value reported for conformal, nanoscale SPEs.

Rough Adhesive Hydrogels (RAd gels) for Underwater Adhesion.

In this work, underwater adhesion is achieved between biocompatible hydrogels and a suite of substrates. Surface roughness, which is typically detrimental for adhesion in air, is shown to be beneficial for underwater adhesion. Contact between the hydrogels with macroscopically flat substrates, and the resulting nonspecific chemical interaction, is facilitated by surface roughness, which enables drainage of the lubricating fluid layer. Hydrogel composition plays an important role in tuning the gel elasticity and interaction with the substrate. Hydrogels that are adhesive on two sides are synthesized for potential use as versatile adhesives in various applications.