Ontogeny and sex differences in object manipulation and probe tool use by wild tufted capuchin monkeys (Sapajus libidinosus).

Tufted capuchin monkeys (Sapajus spp.) are the only Neotropical Primates that regularly use tools in the wild, but only one population of bearded capuchin monkeys (Sapajus libidinosus) is known to habitually use sticks as probes. In this population, males are typically the only sex to use stick tools, something unexpected, since there are no obvious physical constraints, and females do use stone tools in the wild and sticks in experimental conditions. We investigated the development of probe tool use in eight infants to clarify whether social influences on learning varied between the sexes, as tool use learning by capuchin monkeys is a socially biased process. We found that in the first 10 months of age, females manipulate sticks as much as males, but after 10-12 months of age, males begin to manipulate them at higher frequencies. We examined if social connections-as opportunities for social learning-could explain this difference and verified that, on close distance social networks, infant males and females have similar connections with older males. However, males observe probe tool use events more often than females when close to such events. The higher frequency of manipulation of sticks, as well as the higher rates of probe tool use observation, appear to be the key to understand why only males are probe tool users in this population. Since there are only male potential models of probe use, a sex motivational bias could explain the sex difference in observation; a bias in observation could explain the differences in manipulation-and manipulation rates would certainly influence the chances of individual, trial-and-error learning (a case of "local/stimulus enhancement").

Nosocomial SARS-CoV-2 infection in urology departments: Results of a prospective multicentric study.

OBJECTIVE: To evaluate the coronavirus disease 2019 perioperative infection rate and mortality rate of patients undergoing urological surgeries during the early pandemic period in Spain. METHODS: This was a non-interventional multicenter prospective study carried out from 9 March to 3 May 2020 in two urology departments in Madrid, Spain. Clinical, microbiological and radiological data of patients who underwent surgery were collected from computerized medical records. RESULTS: A total of 148 patients were included in the study, and 141 were analyzed for nosocomial infection risk, after excluding previous and concomitant severe acute respiratory syndrome coronavirus type 2 infections. Elective surgeries represented 76.6% of the procedures, whereas emergent surgeries represented 23.4%. Preoperative screening was carried out with polymerase chain reaction test in 34 patients, all were negative. A total of 14 patients also had chest X-ray (not suspicious in all cases). Three patients (2.1%) developed severe acute respiratory syndrome coronavirus type 2 nosocomial infection (symptoms developed between the third day after surgery to the 14th day after hospital discharge). Time from admission to a compatible clinical case was 5.5 days (4-12 days). Two patients underwent surgery with concomitant diagnosis of coronavirus disease. The mortality rate due to severe acute respiratory syndrome coronavirus type 2 infection is 0.7%, and the specific mortality rate in patients undergoing surgery with community-acquired coronavirus disease 2019 infection was 50% (1/2). CONCLUSIONS: The nosocomial severe acute respiratory syndrome coronavirus type 2 infection rate was low in patients undergoing urological surgical procedures during the peak of the pandemic in Madrid. With appropriate perioperative screening, urological surgical activity can be carried out in safety conditions.

Feasibility of an Alzheimer's disease knowledge intervention in the Latino community.

Background: Latinos experience disparities in Alzheimer's disease (AD) knowledge. The aim of this study was to explore the feasibility of a 45-minute culturally-tailored AD knowledge presentation for professionals serving the Latino community and Latinos served by Latino community organizations. Methods: One-session AD knowledge lunch-and-learn events were conducted with 40 professionals and 37 served Latinos. Participants received a pre-post survey including questions on satisfaction, a subjective AD knowledge question and a 14 item objective AD knowledge questionnaire. Results: Professionals (54.3%) and served Latinos (94.6%) reported the session as being very enjoyable and increased in objective AD knowledge (2.1 and 2.5 units, p < .001) and subjective knowledge (1.1 and 1.7 units; p < .001). Discussion: A brief in-person culturally-tailored session of AD education increases short-term AD knowledge and is perceived as interesting and useful among professionals serving the Latino community and Latinos served by Latino community organizations.

High efficiency removal of As(III) from waters using a new and friendly adsorbent based on sugarcane bagasse and corncob husk Fe-coated biochars.

Water contamination of As is a big issue in many areas around the globe. Therefore, cheap and efficient techniques are essential facing traditional treatment methods. Then, biochars (BC) emerged recently as material that can be used for As removal. However, research about efficiency of BC produced from local feedstock is still needed. The purpose of this study is to assess the efficiency of BC produced from sugarcane bagasse (SB) together with corncob husk (CH) with and without Fe(III) (BCFe) modification to be used for removal of As(III) from waters. The BC and BCFe produced at different pyrolysis temperatures were characterised using FTIR and SEM/EDS. Adsorption capacities of BC and BCFe were evaluated via batch adsorption, desorption and column tests and their performance was compared with adsorption using activated carbon. The results showed that Fe modification improve substantially the As(III) adsorption in a way that both BCFe-SB and BCFe-CH removed from 85% to 99.9% from 1000 µg/L As(III) solutions. Both materials fitted well in Langmuir model and the maximum adsorption capacity was 20 mg/g for BCFe-SB and 50 mg/g for BCFe-CH. The adsorption kinetics of BCFe was fast (≤ 30 min) and it had a better performance than activated carbon. The column tests showed that the process is efficient even at high As(III) concentrations. The fast removal process and good removal results make the BCFe-SB and BCFe-CH attractive for in situ and commercial (filters) use, since time and efficiency are required in new technologies.

Toxicity assessment of arsenic and cobalt in the presence of aquatic humic substances of different molecular sizes.

The release of contaminants in aquatic ecosystems can be influenced by humic acids. In this study, toxicity tests using environmentally relevant concentrations of arsenic and cobalt were conducted both in the presence and absence of aquatic humic substances (AHS) and the fractions of different molecular sizes in the range of (<5, 5-10;10-30; 30-100 and >100kDa) using the microcrustacean Ceriodaphnia dubia. AHS together with arsenic reduced the toxicity, and the toxicity decreased in fractions of larger molecular size AHS. Despite the presence of cobalt, the reduction in toxicity was not observed and that depended on the molecular size of AHS. There was a trend of enhanced toxicity for Co in fractions of larger molecular sizes, opposed to that found for arsenic. Thus, the humic substances alter toxicity of trace elements, and this effect varies depending on the size of the humic substances.

Evaluation of a pharmacogenetic-based warfarin dosing algorithm in patients with low time in therapeutic range - study protocol for a randomized controlled trial.

BACKGROUND: Time in therapeutic range (TTR) is a measurement of quality of warfarin therapy and lower TTR values (<50%) are associated with greater risk of thromboembolic and bleeding events. Recently, we developed a pharmacogenetic-based warfarin dosing algorithm specifically calibrated for a Brazilian patient sample. The aims of this study are: to evaluate the impact of a genetic-based algorithm, compared to traditional anticoagulation, in the time to achieve the therapeutic target and in TTR percentage; and to assess the cost-effectiveness of genotype-guided warfarin dosing in a specific cohort of patients with low TTR (<50%) from a tertiary cardiovascular hospital. METHODS/DESIGN: This study is a randomized controlled trial in patients (n = 300) with atrial fibrillation with TTR < 50%, based on the last three INR values. At the first consultation, patients will be randomized into two groups: TA group (traditional anticoagulation) and PA group (pharmacogenetic anticoagulation). For the first group, the physician will adjust the dose according to current INR value and, for the second group, a pharmacogenetic algorithm will be used. At the second, third, fourth and fifth consultations (with an interval of 7 days each) INR will be measured and, if necessary, the dose will be adjusted based on guidelines. Afterwards, patients who are INR stable will begin measuring their INR in 30 day intervals; if the patient's INR is not stable, the patient will return in 7 days for a new measurement of the INR. Outcomes measures will include the time to achieve the therapeutic target and the percentage of TTR at 4 and 12 weeks. In addition, as a secondary end-point, pharmacoeconomic analysis will be carried out. Ethical approval was granted by the Ethics Committee for Medical Research on Human Beings of the Clinical Hospital of the University of São Paulo Medical School. DISCUSSION: This randomized study will include patients with low TTR and it will evaluate whether a population-specific genetic algorithm might be more effective than traditional anticoagulation for a selected group of poorly anticoagulated patients. TRIAL REGISTRATION: ClinicalTrials.gov, NCT02592980 . Registered on 29 October 2015.

Nanobiosensors exploiting specific interactions between an enzyme and herbicides in atomic force spectroscopy.

The development of sensitive methodologies for detecting agrochemicals has become important in recent years due to the increasingly indiscriminate use of these substances. In this context, nanosensors based on atomic force microscopy (AFM) tips are useful because they provide higher sensitivity with operation at the nanometer scale. In this paper we exploit specific interactions between AFM tips functionalized with the enzyme acetolactate synthase (ALS) to detect the ALS-inhibitor herbicides metsulfuron-methyl and imazaquin. Using atomic force spectroscopy (AFS) we could measure the adhesion force between tip and substrate, which was considerably higher when the ALS-functionalized tip (nanobiosensor) was employed. The increase was approximately 250% and 160% for metsulfuron-methyl and imazaquin, respectively, in comparison to unfunctionalized probes. We estimated the specific enzyme-herbicide force by assuming that the measured force comprises an adhesion force according to the Johnson-Kendall-Roberts (JKR) model, the capillary force and the specific force. We show that the specific, biorecognition force plays a crucial role in the higher sensitivity of the nanobiosensor, thus opening the way for the design of similarly engineered tips for detecting herbicides and other analytes.

LPA rs10455872 polymorphism is associated with coronary lesions in Brazilian patients submitted to coronary angiography.

BACKGROUND: Polymorphisms in the LPA gene were associated with coronary artery disease (CAD). However, there are differences in the allelic frequencies, Lp(a) levels, and significant association with CAD according to ethnic groups. In this scenario, the main aim of this study was to assess the influence of the LPA polymorphisms on coronary lesions in Brazilian patients. METHODS: 1,394 consecutive patients submitted to coronary angiography to study suggestive CAD and twenty coronary segments were scored. Genotyping for the LPA rs10455872 and rs3798220 polymorphisms were performed by high resolution melting analysis. RESULTS: The frequencies of the rs10455872 G and rs3798220 C variant alleles were 6.4% and 6.2%, respectively. LPA rs10455872 G variant allele was associated with higher odds ratio of having coronary lesions in an adjusted model (OR = 2.02, 95% CI = 1.10-3.72, p = 0.02). Scores of coronary lesions (extension, severity, and Gensini scores) were significantly different among rs10455872 genotype groups. Coronary lesions was not associated with LPA rs3798220 (OR = 1.09, 95% CI = 0.67-1.76, p = 0.73) and scores of coronary lesions were not different among rs3798220 genotypes. CONCLUSIONS: We confirmed the association of the LPA rs10455872 with CAD in a large sample of Brazilian patients. For the LPA rs3798220, our finding is consistent with studies which showed the lack of this genetic association.

Global warming and coastal protected areas: A study on phytoplankton abundance and sea surface temperature in different regions of the Brazilian South Atlantic Coastal Ocean.

In this study, we examined the relationship between sea surface temperature (SST) and phytoplankton abundance in coastal regions of the Brazilian South Atlantic: São Paulo, Paraná, and Santa Catarina, and the Protection Area of Southern right whales (Eubalaena australis) in Santa Catarina (APA), a conservation zone established along 130 km of coastline. Using SST and chlorophyll-a (Chl-a) data from 2002 to 2023, we found significant differences in SST between the regions, with São Paulo having the highest SST, followed by Paraná and Santa Catarina. All locations showed a consistent increase in SST over the years, with North Santa Catarina, APA and São Paulo experiencing the lowest rate of increase. Correlation analyses between SST and Chl-a revealed a stronger inverse relationship in North Santa Catarina and APA, indicating an increased response of Chl-a to SST variations in this region. The presence of protected area appears to play an essential role in reducing the negative impacts of increasing SST. Specifically, while there is a wealth of research on the consequences of global warming on diverse coastal and oceanic areas, heterogeneity among different settings persists and the causes for this necessitating attention. Our findings have implications for both localized scientific approaches and broader climate policies, emphasizing the importance of considering coastal ecosystem resilience to climate change in future conservation and adaptation strategies.

Potential Effects of the Different Matrices to Enhance the Polyphenolic Content and Antioxidant Activity in Gluten-Free Bread.

Gluten-related disorders, including celiac disease, wheat allergy, and non-celiac gluten sensitivity, have emerged as a significant phenomenon affecting people worldwide, with an estimated prevalence of nearly 5% globally. The only currently available treatment for this disease involves the exclusion of gluten from the diet, which is particularly challenging in the case of bakery products. Gluten-free bread (GFB) presents certain disadvantages when compared to traditional wheat bread, including inferior sensory attributes, technological characteristics, and lower protein and fiber content. Numerous studies have focused on strategies to improve these aspects of GFB. However, there are limited reviews regarding the content of the bioactive compounds of GFB, such as polyphenols. Polyphenols are molecules found in various foods that play a vital role in protecting the body against oxidative stress. This is particularly relevant for individuals with gluten intolerance or celiac disease, as they often experience increased oxidative stress and inflammation. Therefore, the objective of this review is to explore the use of different strategies for increasing the polyphenolic content and the antioxidant properties of GFB. Gluten-free cereals and pseudocereals are the most used matrices in GFB. Buckwheat can be a valuable matrix to enhance the nutritional profile and antioxidant properties of GFB, even more so when the whole grain is used. In the same way, the addition of various by-products can effectively increase the bioactive compounds and antioxidant activity of GFB. Furthermore, regarding the contribution of the phenolics to the bitterness, astringency, color, flavor, and odor of food, it is essential to analyze the sensory properties of these breads to ensure not only enriched in bioactive compounds, but also good consumer acceptance. In vitro studies are still in few number and are very important to execute to provide a better understanding of the bioactive compounds after their consumption.

Estimated mortality rates of individuals with sickle cell disease in Brazil: real-world evidence.

Sickle cell disease (SCD) is a group of hereditary chronic diseases with a substantial impact on quality of life and morbimortality. In Brazil, it is 1 of the most common hereditary diseases; however, there are sparse epidemiological data for the country. Using data from death certificates, we aimed to estimate the median age at death, years of life lost because of SCD, and the median survival. From 2015 to 2019, we identified 3320 records of deaths of individuals with SCD, from a total of 6 553 132 death records. Among individuals with SCD, the median age at death was 37 years less than that of the general population (SCD: aged 32.0 years at death, interquartile range [IQR], 19.0-46.0; general population: aged 69.0 years at death; IQR, 53.0-81.0). Results were consistent when stratified by sex or race. Over the 5 years evaluated, crude death rates varied from 0.30 to 0.34 per 100 000 inhabitants (mean 0.32 per 100 000 inhabitants). We estimated a prevalence of 60 017 individuals living with SCD (29.02 cases per 100 000) and an average incidence of 1362 cases yearly. The median estimated survival was 40 years for individuals with SCD and 80 years for the general population. SCD was associated with an increased risk of mortality in most age ranges. Among individuals with SCD aged between 1 and 9 years and between 10 and 39 years, the risk of death was 32 and 13 times higher, respectively. The most common causes of death were sepsis and respiratory failure. These results highlight the burden of SCD in Brazil and the necessity of improved care for this population.

ABCB1 haplotype is associated with major molecular response in chronic myeloid leukemia patients treated with standard-dose of imatinib.

BACKGROUND: Imatinib mesylate (IM) is a selective tyrosine kinase inhibitor used for treating chronic myeloid leukemia (CML). IM has high efficacy, however some individuals develop a resistance due to impaired bioavailability. Polymorphisms in genes encoding membrane transporters such as ABCB1 have been associated with differences in protein expression and function that influence the response to several drugs. AIM: To investigate the relationship of ABCB1 polymorphisms with markers of response to IM in patients with CML. METHODS: One hundred eighteen CML patients initially treated with a standard dose of IM (400mg/day) for 18months were selected at two health centers in Sao Paulo City, Brazil. The response criteria were based on the European LeukemiaNet recommendations. ABCB1 polymorphisms c.1236C>T (rs1128503), c.3435C>T (rs1045642) and c.2677G>T/A (rs2032582) were evaluated by PCR-RFLP. RESULTS: ABCB1 polymorphisms were not related with a risk for CML in this sample population (p<0.05). In the CML group, frequencies of ABCB1 SNPs were similar between responder and non-responder patients (p>0.05). In the responder group, the frequency of ABCB11236CT/2677GT/3435CT haplotype was higher in patients with major molecular response (MMR) (51.7%) than in patients without MMR (8.3%, p=0.010). Furthermore, carriers of this haplotype had increased the probability of reaching the MMR compared with the non-carriers (OR: 11.8; 95% CI: 1.43-97.3, p=0.022). CONCLUSIONS: The ABCB1 1236CT/2677GT/3435CT haplotype is positively associated with the major molecular response to IM in CML patients.

Atomic force microscopy as a tool applied to nano/biosensors.

This review article discusses and documents the basic concepts and principles of nano/biosensors. More specifically, we comment on the use of Chemical Force Microscopy (CFM) to study various aspects of architectural and chemical design details of specific molecules and polymers and its influence on the control of chemical interactions between the Atomic Force Microscopy (AFM) tip and the sample. This technique is based on the fabrication of nanomechanical cantilever sensors (NCS) and microcantilever-based biosensors (MC-B), which can provide, depending on the application, rapid, sensitive, simple and low-cost in situ detection. Besides, it can provide high repeatability and reproducibility. Here, we review the applications of CFM through some application examples which should function as methodological questions to understand and transform this tool into a reliable source of data. This section is followed by a description of the theoretical principle and usage of the functionalized NCS and MC-B technique in several fields, such as agriculture, biotechnology and immunoassay. Finally, we hope this review will help the reader to appreciate how important the tools CFM, NCS and MC-B are for characterization and understanding of systems on the atomic scale.

Theoretical models for surface forces and adhesion and their measurement using atomic force microscopy.

The increasing importance of studies on soft matter and their impact on new technologies, including those associated with nanotechnology, has brought intermolecular and surface forces to the forefront of physics and materials science, for these are the prevailing forces in micro and nanosystems. With experimental methods such as the atomic force spectroscopy (AFS), it is now possible to measure these forces accurately, in addition to providing information on local material properties such as elasticity, hardness and adhesion. This review provides the theoretical and experimental background of afs, adhesion forces, intermolecular interactions and surface forces in air, vacuum and in solution.

Economic burden of sickle cell disease in Brazil.

BACKGROUND: Sickle cell disease (SCD) may cause several impacts to patients and the whole society. About 4% of the population has the sickle cell trait in Brazil, and 60,000 to 100,000 have SCD. However, despite recognizing the significant burden of disease, little is known about SCD costs. OBJECTIVE: To estimate SCD societal costs based on disease burden modelling, under Brazilian societal perspective. METHODS: A disease burden model was built considering the societal perspective and a one-year time horizon, including direct medical and indirect costs (morbidity and mortality). The sum of life lost and disability years was considered to estimate disability-adjusted life years (DALYs). Data from a public database (DATASUS) and the prevalence obtained from literature or medical experts were used to define complications prevalence and duration. Costs were defined using data from the Brazilian public healthcare system table of procedures and medications (SIGTAP) and the human capital method. RESULTS: Annual SCD cost was 413,639,180 USD. Indirect cost accounted for the majority of burden (70.1% of the total; 290,158,365 USD vs 123,480,816 USD). Standard of care and chronic complications were the main source of direct costs among adults, while acute conditions were the main source among children. Vaso-occlusive crisis represented the complication with the highest total cost per year in both populations, 11,400,410 USD among adults and 11,510,960 USD among children. CONCLUSIONS: SCD management may impose an important economic burden on Brazilian society that may reach more than 400 million USD per year.

Recent Developments in Nanotechnology for Detection and Control of Aedes aegypti-Borne Diseases.

Arboviruses such as yellow fever, dengue, chikungunya and zika are transmitted mainly by the mosquito vector Aedes aegypti. Especially in the tropics, inefficacy of mosquito control causes arboviruses outbreaks every year, affecting the general population with debilitating effects in infected individuals. Several strategies have been tried to control the proliferation of A. aegypti using physical, biological, and chemical control measures. Other methods are currently under research and development, amongst which the use of nanotechnology has attracted a lot of attention of the researchers in relation to the production of more effective repellents and larvicides with less toxicity, and development of rapid sensors for the detection of virus infections. In this review, the utilization of nano-based formulations on control and diagnosis of mosquito-borne diseases were discussed. We also emphasizes the need for future research for broad commercialization of nano-based formulations in world market aiming a positive impact on public health.

Association of the genetic ancestry with resistant hypertension in the ReHOT (Resistant Hypertension Optimal Treatment) randomized study.

Resistant hypertension (RH) is defined as uncontrolled blood pressure despite treatment with three or more antihypertensive medications, including, if tolerated, a diuretic in adequate doses. It has been widely known that race is associated with blood pressure control. However, intense debate persists as to whether this is solely explained by unadjusted socioeconomical variables or genetic variation. In this scenario, the main aim was to evaluate the association between genetic ancestry and resistant hypertension in a large sample from a multicenter trial of stage II hypertension, the ReHOT study. Samples from 1,358 patients were analyzed, of which 167 were defined as resistant hypertensive. Genetic ancestry was defined using a panel of 192 polymorphic markers. The genetic ancestry was similar in resistant (52.0% European, 36.7% African and 11.3% Amerindian) and nonresistant hypertensive patients (54.0% European, 34.4% African and 11.6% Amerindian) (p > 0.05). However, we observed a statistically suggestive association of African ancestry with resistant hypertension in brown patient group. In conclusion, increased African genetic ancestry was not associated with RH in Brazilian patients from a prospective randomized hypertension clinical trial.

Dominance of in situ produced particulate organic carbon in a subtropical reservoir inferred from carbon stable isotopes.

Sources of particulate organic carbon (POC) play important roles in aqueous carbon cycling because internal production can provide labile material that can easily be turned into CO2. On the other hand, more recalcitrant external POC inputs can cause increased loads to sedimentary organic matter that may ultimately cause CH4 release. In order to differentiate sources, stable isotopes offer a useful tool. We present a study on the Itupararanga Reservoir (Brazil) where origins of POC were explored by comparing its isotope ratios (δ13CPOC) to those of dissolved inorganic carbon (δ13CDIC). The δ13CPOC averaged around - 25.1‰ in near-surface waters, which indicates higher primary production inferred from a fractionation model that takes into account carbon transfer with a combined evaluation of δ13CPOC, δ13CDIC and aqueous CO2. However, δ13CPOC values for water depths from 3 to 15 m decreased to - 35.6‰ and indicated different carbon sources. Accordingly, the δ13CDIC values of the reservoir averaged around + 0.6‰ in the top 3 m of the water column. This indicates CO2 degassing and photosynthesis. Below this depth, DIC isotope values of as low as - 10.1‰ showed stronger influences of respiration. A fractionation model with both isotope parameters revealed that 24% of the POC in the reservoir originated from detritus outside the reservoir and 76% of it was produced internally by aqueous CO2 fixation.

Multianalytical characterization of biochar and hydrochar produced from waste biomasses for environmental and agricultural applications.

Biochar (BC) and hydrochar (HC) are solid by-products obtained from various types of biomasses through the processes of pyrolysis and hydrothermal carbonization, respectively. Both BC and HC represent a sustainable solution for carbon sequestration and can be used as soil amendments or sorbents for organic and inorganic pollutants. However, the properties of BC and HC largely depend on feedstock and production parameters, which significantly affect their proper use. A detailed characterization of these materials is therefore needed to assess their suitability for environmental and/or agricultural applications. In this work, two BC samples and two HC samples were characterized with a multianalytical approach, including total reflection X-ray fluorescence (TXRF) spectroscopy, scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR) spectroscopy, thermogravimetric analyses (TG), and pyrolysis coupled to gas chromatography and mass spectrometry (Py-GC/MS). By comparing BC and HC data, HC showed a higher content of mineral elements, including important plant nutrients and potentially toxic elements. HC produced from solid urban wastes contained also some potentially toxic organic molecules, like chlorinated aromatic compounds. BC samples were characterized by a higher porosity and hydrophobicity than HC, thus being potentially more suitable for the sorption of organic pollutants. HC samples showed a higher content of cellulose and hemicellulose, resulting in a more hydrophilic but less thermally stable material than BC. In conclusion, both BC and HC have interesting properties for environmental and agricultural applications but careful selection of feedstock is needed, especially for HC production.

Effect of a highly concentrated lipopeptide extract of Bacillus subtilis on fungal and bacterial cells.

Lipopeptides produced by Bacillus subtilis are known for their high antifungal activity. The aim of this paper is to show that at high concentration they can damage the surface ultra-structure of bacterial cells. A lipopeptide extract containing iturin and surfactin (5 mg mL(-1)) was prepared after isolation from B. subtilis (strain OG) by solid phase extraction. Analysis by atomic force microscope (AFM) showed that upon evaporation, lipopeptides form large aggregates (0.1-0.2 microm(2)) on the substrates silicon and mica. When the same solution is incubated with fungi and bacteria and the system is allowed to evaporate, dramatic changes are observed on the cells. AFM micrographs show disintegration of the hyphae of Phomopsis phaseoli and the cell walls of Xanthomonas campestris and X. axonopodis. Collapses to fungal and bacterial cells may be a result of formation of pores triggered by micelles and lamellar structures, which are formed above the critical micelar concentration of lipopeptides. As observed for P. phaseoli, the process involves binding, solubilization, and formation of novel structures in which cell wall components are solubilized within lipopeptide vesicles. This is the first report presenting evidences that vesicles of uncharged and negatively charged lipopeptides can alter the morphology of gram-negative bacteria.