RESUMO
The development of earth-abundant transition-metal complexes for electrocatalytic ammonia oxidation is needed to facilitate a renewable energy economy. Important to this goal is a fundamental understanding of how ammonia binds to complexes as a function of ligand geometry and electronic effects. We report the synthesis and characterization of a series of Fe(II)-NH3 complexes supported by tetradentate, facially binding ligands with a combination of pyridine and N-heterocyclic carbene donors. Electronic modification of the supporting ligand led to significant shifts in the FeIII/II potential and variations in NH bond acidities. Finally, investigations of ammonia oxidation by cyclic voltammetry, controlled potential bulk electrolysis, and through addition of stoichiometric organic radicals, TEMPO and tBu3ArO⢠are reported. No catalytic oxidation of NH3 to N2 was observed, and 15N2 was detected only in reactions with tBu3ArOâ¢.
RESUMO
Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as "P2N2" ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(PR2NR'2)2]2+ complexes are electrocatalysts for both the oxidation and production of H2. Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(PR2NR'2)2]2+ complexes for the oxidation and production of H2, catalysts with diphosphine ligands containing pendant amines have also been demonstrated for several metals for many different reactions, both in solution and immobilized on surfaces. The impact of pendant amines in catalyst design continues to expand.
Assuntos
Aminas , Hidrogenase , Aminas/química , Catálise , Hidrogênio/química , Hidrogenase/química , LigantesRESUMO
Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon-neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth-abundant transition metal complex, trans-[LFeII(MeCN)2][PF6]2, where L is a macrocyclic ligand bearing four N-heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator (p-MeOC6H4)3N exhibited a catalytic half-wave potential (Ecat/2) of 0.18 V vs [Cp2Fe]+/0 in MeCN, and achieved 9.3 turnovers of N2 at an applied potential of 0.20 V vs [Cp2Fe]+/0 at -20 °C in controlled-potential electrolysis, with a Faradaic efficiency of 75%. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFeIV(NH2)2]2+, and thereafter bimetallic coupling to form an N-N bond.
RESUMO
The ability of Cu-H complexes to undergo selective insertion of unsaturated hydrocarbons under mild conditions has rendered them valuable, versatile catalysts. The direct formation of Cu allyl intermediates from unfunctionalized 1,3-dienes and transient Cu hydrides is an appealing strategy for upgrading conjugated diene feedstocks. However, empirical mechanistic studies of the underlying elementary steps and characterization of key intermediates in Cu-H catalysis are sparse. Using [(NHC)CuH]2 (NHC = N-heterocyclic carbene), we examined the steric effects of NHC ligands on two key elementary steps of CuH-catalyzed carbonyl allylation: the insertion of a diene into the Cu-H bond to produce a Cu-allyl complex, and the formation of C-C bonds from stoichiometric allylations of ketones and aldehydes. The resulting allyl and homoallylic alkoxide complexes have been characterized by NMR spectroscopy and single-crystal X-ray diffraction. Employing isolable (NHC)Cu-allyl complexes, we further evaluated the roles of the ligand size, electronic properties of carbonyl substrates, coordinating groups within the substrate, and solvent on the regioselectivity, diastereoselectivity, and relative rate of the C-C bond formation step. In contrast to the clean allylation of ketones, allylation of aldehydes provided a rare example of a formal ß-hydride elimination reaction from a secondary homoallylic alkoxide species. Mechanistic studies of key elementary steps provide insights for a range of catalytic reactions of dienes mediated by hydride complexes.
Assuntos
Aldeídos , Butadienos , Aldeídos/química , Polienos , Cetonas , CatáliseRESUMO
Mechanistic studies of substrate insertion into dimeric [(NHC)CuH]2 (NHC=N-heterocyclic carbene) complexes with two bridging hydrides have been shown to require dimer dissociation to generate transient, highly reactive (NHC)Cu-H monomers in solution. Using single-crystal to single-crystal (SC-SC) transformations, we discovered a new pathway of stepwise insertion of CO2 into [(NHC)CuH]2 without complete dissociation of the dimer. The first CO2 insertion into dimeric [(IPr*OMe)CuH]2 (IPr*OMe=N,N'-bis(2,6-bis(diphenylmethyl)-4-methoxy-phenyl)imidazole-2-ylidene) produced a dicopper formate hydride [(IPr*OMe)Cu]2 (µ-1,3-O2 CH)(µ-H). A second CO2 insertion produced a dicopper bis(formate), [(IPr*OMe)Cu]2 (µ-1,3-O2 CH)(µ-1,1-O2 CH), containing two different bonding modes of the bridging formate. These dicopper formate complexes are inaccessible from solution reactions since the dicopper core cleanly ruptures to monomeric complexes when dissolved in a solvent.
RESUMO
Transient Cu-H monomers have long been invoked in the mechanisms of substrate insertion in Cu-H catalysis. Their role from Cu-H aggregates has been mostly inferred since ligands to stabilize these monomeric intermediates for systematic studies remain limited. Within the last decade, new sterically demanding N-heterocyclic carbene (NHC) ligands have led to isolable Cu-H dimers and, in some cases, spectroscopic characterization of Cu-H monomers in solution. We report an NHC ligand, IPr*R, containing para R groups of CHPh2 and CPh3 on the ligand periphery for the isolation of a Cu-H monomer for insertion of internal alkenes. This reactivity has not been reported for (NHC)CuH complexes despite their common application in Cu-H-catalyzed hydrofunctionalization. Changing from CHPh2 to CPh3 impacts the relative concentration of Cu-H monomers, rate of alkene insertion, and reaction of a trisubstituted internal alkene. Specifically, for R = CPh3, monomeric (IPr*CPh3)CuH was isolated and provided >95% monomer (10 mM in C6D6). In contrast, for R = CHPh2, solutions of [(IPr*CHPh2)CuH]2 are 80% dimer and 20% (IPr*CHPh2)CuH monomer at 25 °C based on 1H, 13C, and 1H-13C HMBC NMR spectroscopy. Quantitative 1H NMR kinetic studies on cyclopentene insertion into Cu-H complexes to form the corresponding Cu-cyclopentyl complexes demonstrate a strong dependence on the rate of insertion and concentration of the Cu-H monomer. Only (IPr*CPh3)CuH, which has a high monomer concentration, underwent regioselective insertion of a trisubstituted internal alkene, 1-methylcyclopentene, to give (IPr*CPh3)Cu(2-methylcyclopentyl), which has been crystallographically characterized. We also demonstrated that (IPr*CPh3)CuH catalyzes the hydroboration of cyclopentene and methylcyclopentene with pinacolborane.
RESUMO
Double hydrogen atom abstraction from (TMP)OsII(NH3)2 (TMP = tetramesitylporphyrin) with phenoxyl or nitroxyl radicals leads to (TMP)OsIV(NH2)2. This unusual bis(amide) complex is diamagnetic and displays an N-H resonance at 12.0 ppm in its 1H NMR spectrum. 1H-15N correlation experiments identified a 15N NMR spectroscopic resonance signal at -267 ppm. Experimental reactivity studies and density functional theory calculations support relatively weak N-H bonds of 73.3 kcal/mol for (TMP)OsII(NH3)2 and 74.2 kcal/mol for (TMP)OsIII(NH3)(NH2). Cyclic voltammetry experiments provide an estimate of the pKa of [(TMP)OsIII(NH3)2]+. In the presence of Barton's base, a current enhancement is observed at the Os(III/II) couple, consistent with an ECE event. Spectroscopic experiments confirmed (TMP)OsIV(NH2)2 as the product of bulk electrolysis. Double hydrogen atom abstraction is influenced by π donation from the amides of (TMP)OsIV(NH2)2 into the d orbitals of the Os center, favoring the formation of (TMP)OsIV(NH2)2 over N-N coupling. This π donation leads to a Jahn-Teller distortion that splits the energy levels of the dxz and dyz orbitals of Os, results in a low-spin electron configuration, and leads to minimal aminyl character on the N atoms, rendering (TMP)OsIV(NH2)2 unreactive toward amide-amide coupling.
RESUMO
Weakening and cleaving N-H bonds is crucial for improving molecular ammonia (NH3) oxidation catalysts. We report the synthesis and H-atom-abstraction reaction of bis(ammonia)chromium porphyrin complexes Cr(TPP)(NH3)2 and Cr(TMP)(NH3)2 (TPP = 5,10,15,20-tetraphenyl-meso-porphyrin and TMP = 5,10,15,20-tetramesityl-meso-porphyrin) using bulky aryloxyl radicals. The triple H-atom-abstraction reaction results in the formation of CrV(por)(≡N), with the nitride derived from NH3, as indicated by UV-vis and IR and single-crystal structural determination of Cr(TPP)(≡N). Subsequent oxidation of this chromium(V) nitrido complex results in the formation of CrIII(por), with scission of the Cr≡N bond. Computational analysis illustrates the progression from CrII to CrV and evaluates the energetics of abstracting H atoms from CrII-NH3 to generate CrV≡N. The formation and isolation of CrV(por)(≡N) illustrates the stability of these species and the need to chemically activate the nitride ligand for atom transfer or N-N coupling reactivity.
RESUMO
Hydrogenolysis and hydrolysis of aryl ethers in the liquid phase are important reactions for accessing functionalized cyclic compounds from renewable feedstocks. On supported noble metals, hydrogenolysis is initiated by a hydrogen addition to the aromatic ring followed by C-O bond cleavage. In water, hydrolysis and hydrogenolysis proceed by partial hydrogenation of the aromatic ring prior to water or hydrogen insertion. The mechanisms are common for the studied metals, but the selectivity to hydrogenolysis increases in the order Pd
RESUMO
We report that (TMP)Ru(NH3)2 (TMP = tetramesitylporphryin) is a molecular catalyst for oxidation of ammonia to dinitrogen. An aryloxy radical, tri-tert-butylphenoxyl (ArO·), abstracts H atoms from a bound ammonia ligand of (TMP)Ru(NH3)2, leading to the discovery of a new catalytic C-N coupling to the para position of ArO· to form 4-amino-2,4,6-tri-tert-butylcyclohexa-2,5-dien-1-one. Modification of the aryloxy radical to 2,6-di-tert-butyl-4-tritylphenoxyl radical, which contains a trityl group at the para position, prevents C-N coupling and diverts the reaction to catalytic oxidation of NH3 to give N2. We achieved 125 ± 5 turnovers at 22 °C for oxidation of NH3, the highest turnover number (TON) reported to date for a molecular catalyst.
RESUMO
Oxidation of ammonia by molecular complexes is a burgeoning area of research, with critical scientific challenges that must be addressed. A fundamental understanding of individual reaction steps is needed, particularly for cleavage of N-H bonds and formation of N-N bonds. This Perspective evaluates the challenges of designing molecular catalysts for oxidation of ammonia and highlights recent key contributions to realizing the goals of viable energy storage and retrieval based on the N-H bonds of ammonia in a carbon-free energy cycle.
RESUMO
The hydrogenolysis of the aromatic C-O bond in aryl ethers catalyzed by Ni was studied in decalin and water. Observations of a significant kinetic isotope effect (kH /kD =5.7) for the reactions of diphenyl ether under H2 and D2 atmosphere and a positive dependence of the rate on H2 chemical potential in decalin indicate that addition of H to the aromatic ring is involved in the rate-limiting step. All kinetic evidence points to the fact that Hâ addition occurs concerted with C-O bond scission. DFT calculations also suggest a route consistent with these observations involving hydrogen atom addition to the ipso position of the phenyl ring concerted with C-O scission. Hydrogenolysis initiated by H addition in water is more selective (ca. 75 %) than reactions in decalin (ca. 30 %).
RESUMO
We report mechanistic studies on the insertion reactions of [(NHC)Cu(µ-H)]2 complexes with carbonyl substrates by UV-vis and 1 Hâ NMR spectroscopic kinetic studies, H/D isotopic labelling, and X-ray crystallography. The results of these comprehensive studies show that the insertion of Cu-H with an aldehyde, ketone, activated ester/amide, and unactivated amide consist of two different rate limiting steps: the formation of Cu-H monomer from Cu-H dimer for more electrophilic substrates, and hydride transfer from a transient Cu-H monomer for less electrophilic substrates. We also report spectroscopic and crystallographic characterization of rare Cu-hemiacetalate and Cu-hemiaminalate moieties from the insertion of an ester or amide into the Cu-H bond.
RESUMO
While diamagnetic transition metal complexes that bind and split H2 have been extensively studied, paramagnetic complexes that exhibit this behavior remain rare. The square planar S = 1/2 FeI(P4N2)+ cation (FeI+) reversibly binds H2/D2 in solution, exhibiting an inverse equilibrium isotope effect of KH2/ KD2 = 0.58(4) at -5.0 °C. In the presence of excess H2, the dihydrogen complex FeI(H2)+ cleaves H2 at 25 °C in a net hydrogen atom transfer reaction, producing the dihydrogen-hydride trans-FeII(H)(H2)+. The proposed mechanism of H2 splitting involves both intra- and intermolecular steps, resulting in a mixed first- and second-order rate law with respect to initial [FeI+]. The key intermediate is a paramagnetic dihydride complex, trans-FeIII(H)2+, whose weak FeIII-H bond dissociation free energy (calculated BDFE = 44 kcal/mol) leads to bimetallic H-H homolysis, generating trans-FeII(H)(H2)+. Reaction kinetics, thermodynamics, electrochemistry, EPR spectroscopy, and DFT calculations support the proposed mechanism.
RESUMO
Semiconductor-based photocathodes with high light-absorption capability are of interest in the production of solar fuels, but many of them are limited by low efficiencies due to rapid interfacial back electron transfer. We demonstrate here that a nanowire-structured p-type Si (p-Si) electrode, surface-modified with a perylene-diimide derivative (PDI'), can undergo photoreduction of a surface-bound, water reduction catalyst toward efficient H2 evolution under a low applied bias. At the electrode interface, the PDI' layer converts green light into high-energy holes at its excited state for extraction of photogenerated electrons at the photoexcited p-Si. The photogenerated electrons at the reduced PDI' are subsequently transferred to the molecular H2-evolution catalyst. Involvement of the photoexcited PDI' enables effective redox separation between the electrons at the reduced catalyst and the holes at the valence band of p-Si. The heterojunction photocathode was used in a tandem cell by coupling with a dye-sensitized photoanode for solar-driven water splitting into H2 and O2.
RESUMO
Catalysts for the oxidation of NH3 are critical for the utilization of NH3 as a large-scale energy carrier. Molecular catalysts capable of oxidizing NH3 to N2 are rare. This report describes the use of [Cp*Ru(PtBu 2 NPh 2 )(15 NH3 )][BArF 4 ], (PtBu 2 NPh 2 =1,5-di(phenylaza)-3,7-di(tert-butylphospha)cyclooctane; ArF =3,5-(CF3 )2 C6 H3 ), to catalytically oxidize NH3 to dinitrogen under ambient conditions. The cleavage of six N-H bonds and the formation of an N≡N bond was achieved by coupling H+ and e- transfers as net hydrogen atom abstraction (HAA) steps using the 2,4,6-tri-tert-butylphenoxyl radical (t Bu3 ArO. ) as the H atom acceptor. Employing an excess of t Bu3 ArO. under 1â atm of NH3 gas at 23 °C resulted in up to ten turnovers. Nitrogen isotopic (15 N) labeling studies provide initial mechanistic information suggesting a monometallic pathway during the Nâ â â N bond-forming step in the catalytic cycle.
RESUMO
We report the first discrete molecular Cr-based catalysts for the reduction of N2. This study is focused on the reactivity of the Cr-N2 complex, trans-[Cr(N2)2(PPh4NBn4)] (P4Cr(N2)2), bearing a 16-membered tetraphosphine macrocycle. The architecture of the [16]-PPh4NBn4 ligand is critical to preserve the structural integrity of the catalyst. P4Cr(N2)2 was found to mediate the reduction of N2 at room temperature and 1 atm pressure by three complementary reaction pathways: (1) Cr-catalyzed reduction of N2 to N(SiMe3)3 by Na and Me3SiCl, affording up to 34 equiv N(SiMe3)3; (2) stoichiometric reduction of N2 by protons and electrons (for example, the reaction of cobaltocene and collidinium triflate at room temperature afforded 1.9 equiv of NH3, or at -78 °C afforded a mixture of NH3 and N2H4); and (3) the first example of NH3 formation from the reaction of a terminally bound N2 ligand with a traditional H atom source, TEMPOH (2,2,6,6-tetramethylpiperidine-1-ol). We found that trans-[Cr(15N2)2(PPh4NBn4)] reacts with excess TEMPOH to afford 1.4 equiv of 15NH3. Isotopic labeling studies using TEMPOD afforded ND3 as the product of N2 reduction, confirming that the H atoms are provided by TEMPOH.
RESUMO
Transition metal hydrides play a critical role in stoichiometric and catalytic transformations. Knowledge of free energies for cleaving metal hydride bonds enables the prediction of chemical reactivity, such as for the bond-forming and bond-breaking events that occur in a catalytic reaction. Thermodynamic hydricity is the free energy required to cleave an M-H bond to generate a hydride ion (H(-)). Three primary methods have been developed for hydricity determination: the hydride transfer method establishes hydride transfer equilibrium with a hydride donor/acceptor pair of known hydricity, the H2 heterolysis method involves measuring the equilibrium of heterolytic cleavage of H2 in the presence of a base, and the potential-pKa method considers stepwise transfer of a proton and two electrons to give a net hydride transfer. Using these methods, over 100 thermodynamic hydricity values for transition metal hydrides have been determined in acetonitrile or water. In acetonitrile, the hydricity of metal hydrides spans a range of more than 50 kcal/mol. Methods for using hydricity values to predict chemical reactivity are also discussed, including organic transformations, the reduction of CO2, and the production and oxidation of hydrogen.
RESUMO
Oxidation of H2 in a fuel cell converts the chemical energy of the H-H bond into electricity. Electrocatalytic oxidation of H2 by molecular catalysts typically requires one metal to perform multiple chemical steps: bind H2 , heterolytically cleave H2 , and then undergo two oxidation and two deprotonation steps. The electrocatalytic oxidation of H2 by a cooperative system using Cp*Cr(CO)3 H and [Fe(diphosphine)(CO)3 ]+ has now been invetigated. A key step of the proposed mechanism is a rarely observed metal-to-metal hydrogen atom transfer from the Cr-H complex to the Fe, forming an Fe-H complex that is deprotonated and then oxidized electrochemically. This "division of chemical labor" features Cr interacting with H2 to cleave the H-H bond, while Fe interfaces with the electrode. Neither metal is required to heterolytically cleave H2 , so this system provides a very unusual example of a homolytic reaction being a key step in a molecular electrocatalytic process.