Solvent selection criteria for temperature-resilient lithium-sulfur batteries.

All-climate temperature operation capability and increased energy density have been recognized as two crucial targets, but they are rarely achieved together in rechargeable lithium (Li) batteries. Herein, we demonstrate an electrolyte system by using monodentate dibutyl ether with both low melting and high boiling points as the sole solvent. Its weak solvation endows an aggregate solvation structure and low solubility toward polysulfide species in a relatively low electrolyte concentration (2 mol L-1). These features were found to be vital in avoiding dendrite growth and enabling Li metal Coulombic efficiencies of 99.0%, 98.2%, and 98.7% at 23 °C, -40 °C, and 50 °C, respectively. Pouch cells employing thin Li metal (50 µm) and high-loading sulfurized polyacrylonitrile (3.3 mAh cm-2) cathodes (negative-to-positive capacity ratio = 2) output 87.5% and 115.9% of their room temperature capacity at -40 °C and 50 °C, respectively. This work provides solvent-based design criteria for a wide temperature range Li-sulfur pouch cells.

Unravelling Ultrafast Li Ion Transport in Functionalized Metal-Organic Framework-Based Battery Electrolytes.

Nonaqueous fluidic transport and ion solvation properties under nanoscale confinement are poorly understood, especially in ion conduction for energy storage and conversion systems. Herein, metal-organic frameworks (MOFs) and aprotic electrolytes are studied as a robust platform for molecular-level insights into electrolyte behaviors in confined spaces. By employing computer simulations, along with spectroscopic and electrochemical measurements, we demonstrate several phenomena that deviate from the bulk, including modulated solvent molecular configurations, aggregated solvation structures, and tunable transport mechanisms from quasi-solid to quasi-liquid in functionalized MOFs. Technologically, taking advantage of confinement effects may prove useful for addressing stability concerns associated with volatile organic electrolytes while simultaneously endowing ultrafast transport of solvates, resulting in improved battery performance, even at extreme temperatures. The molecular-level insights presented here further our understanding of structure-property relationships of complex fluids at the nanoscale, information that can be exploited for the predictive design of more efficient electrochemical systems.

Partially Ion-Paired Solvation Structure Design for Lithium-Sulfur Batteries under Extreme Operating Conditions.

Achieving increased energy density under extreme operating conditions remains a major challenge in rechargeable batteries. Herein, we demonstrate an all-fluorinated ester-based electrolyte comprising partially fluorinated carboxylate and carbonate esters. This electrolyte exhibits temperature-resilient physicochemical properties and moderate ion-paired solvation, leading to a half solvent-separated and half contact-ion pair in a sole electrolyte. As a result, facile desolvation and preferential reduction of anions/fluorinated co-solvents for LiF-dominated interphases are achieved without compromising ionic conductivity (>1 mS cm-1 even at -40 °C). These advantageous features were found to apply to both lithium metal and sulfur-based electrodes even under extreme operating conditions, allowing stable cycling of Li || sulfurized polyacrylonitrile (SPAN) full cells with high SPAN loading (>3.5 mAh cm-2 ) and thin Li anode (50 µm) at -40, 23 and 50 °C. This work offers a promising path for designing temperature-resilient electrolytes to support high energy density Li metal batteries operating in extreme conditions.

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications.

Metal-organic frameworks (MOFs) have been widely recognized as one of the most fascinating classes of materials from science and engineering perspectives, benefiting from their high porosity and well-defined and tailored structures and components at the atomic level. Although their intrinsic micropores endow size-selective capability and high surface area, etc., the narrow pores limit their applications toward diffusion-control and large-size species involved processes. In recent years, the construction of hierarchically porous MOFs (HP-MOFs), MOF-based hierarchically porous composites, and MOF-based hierarchically porous derivatives has captured widespread interest to extend the applications of conventional MOF-based materials. In this Review, the recent advances in the design, synthesis, and functional applications of MOF-based hierarchically porous materials are summarized. Their structural characters toward various applications, including catalysis, gas storage and separation, air filtration, sewage treatment, sensing and energy storage, have been demonstrated with typical reports. The comparison of HP-MOFs with traditional porous materials (e.g., zeolite, porous silica, carbons, metal oxides, and polymers), subsisting challenges, as well as future directions in this research field, are also indicated.

Templating Synthesis of Metal-Organic Framework Nanofiber Aerogels and Their Derived Hollow Porous Carbon Nanofibers for Energy Storage and Conversion.

A kind of metal-organic framework (MOF) aerogels are synthesized by the self-assembly of uniform and monodisperse MOF nanofibers. Such MOF nanofiber aerogels as carbon precursors can effectively avoid the aggregation of nanofibers during calcination, resulting in the formation of well-dispersed hollow porous carbon nanofibers (HPCNs). Moreover, HPCNs with well-dispersion are investigated as sulfur host materials for Li-S batteries and electrocatalysts for cathode oxygen reduction reaction (ORR). On the one hand, HPCNs act as hosts for the encapsulation of sulfur into their hierarchical micro- and mesopores as well as hollow nanostructures. The obtained sulfur cathode exhibits excellent electrochemical features, good cycling stability and high coulombic efficiency. On the other hand, HPCNs exhibit better electrocatalytic activity than aggregated counterparts for ORR. Furthermore, a highly active single atom electrocatalyst can be prepared by the carbonization of bimetallic MOF nanofiber aerogels. The results indicate that well-dispersed HPCNs show enhanced electrochemical properties in contrast to their aggregated counterparts, suggesting that the dispersion situation of nanomaterials significantly influence their final performance. The present concept of employing MOF nanofiber aerogels as precursors will provide a new strategy to the design of MOF-derived nanomaterials with well-dispersion for their applications in energy storage and conversion.

A Modulator-Induced Defect-Formation Strategy to Hierarchically Porous Metal-Organic Frameworks with High Stability.

The pore size enlargement and structural stability have been recognized as two crucial targets, which are rarely achieved together, in the development of metal-organic frameworks (MOFs). Herein, we have developed a versatile modulator-induced defect-formation strategy, in the presence of monocarboxylic acid as a modulator and an insufficient amount of organic ligand, successfully realizing the controllable synthesis of hierarchically porous MOFs (HP-MOFs) with high stability and tailorable pore characters. Remarkably, the integration of high stability and large mesoporous property enables these HP-MOFs to be important porous platforms for applications involving large molecules, especially in catalysis.

Metal-Organic Frameworks for the Enhancement of Lithium-Based Batteries: A Mini Review on Emerging Functional Designs.

Metal-organic frameworks (MOFs) have played a crucial role in recent advancements in developing lithium-based battery electrolytes, electrodes, and separators. Although many MOF-based battery components rely on their well-defined porosity and controllable functionality, they also boast a myriad of other significant properties relevant to battery applications. In this mini-review, the distinct advantages of MOFs in battery applications are discussed, including using MOFs to 1) scavenge impurities to increase cycling stability, 2) widen the operation temperature range of conventional electrolytes, 3) widen the operation voltage range of common electrolytes, and 4) employ as artificial solid-electrolyte interphases to prevent lithium dendrite growth. Furthermore, subsisting challenges of developing these emerging MOF-based battery technologies are discussed and guidance for shaping the future of this field is given.

Effect of Electrolyte Chemistry and Sulfur Content in Li||Sulfurized Polyacrylonitrile (SPAN) Batteries.

Sulfurized polyacrylonitrile (SPAN) is considered as a high-value cathode material, which leverages the high energy of S redox while mitigating the negative externalities that limit elemental S cycling. As such, the sulfur content in Li-SPAN batteries plays a critical role. In this work, we demonstrate that high-S loading SPAN cathodes, where the PAN backbone approaches the saturation point without signs of elemental S, are highly dependent on the electrolyte chemistry for long-term reversibility. Specifically, we find that a localized-high-concentration electrolyte (LHCE) further enhances the reversible capacity and cycling stability of SPAN cathode with optimized S content relative to a carbonate control, largely due to the formation of a compatible interphase. With this LHCE as the electrolyte and 43% sulfur ratio of SPAN as the cathode, a full cell applying N/P ratio = 1.82, a cathode loading of 6 mAh cm-2 (9.2 mg cm-2), and an electrolyte loading of 7 µL mg-1 SPAN can be cycled for 100 cycles with 433 mAh g-1 retained capacity and retains much of this reversibility even at 60 °C. This work reveals the molecular origin of optimized sulfur ratio in SPAN cathodes while providing guidance in electrolyte design for Li||SPAN cells with high capacity and cyclability.

Ultralow-Temperature Li/CFx Batteries Enabled by Fast-Transport and Anion-Pairing Liquefied Gas Electrolytes.

Lithium fluorinated-carbon (Li/CFx ) is one of the most promising chemistries for high-energy-density primary energy-storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density (>2100 Wh kg-1 ) under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, a liquefied gas electrolyte with an anion-pair solvation structure based on dimethyl ether with a low melting point (-141 °C) and low viscosity (0.12 mPa s, 20 °C), leading to high ionic conductivity (>3.5 mS cm-1 ) between -70 and 60 °C is reported. Besides that, through systematic X-ray photoelectron spectroscopy integrated with transmission electron microscopy characterizations, the interface of CFx is evaluated for low-temperature performance. The fast transport and anion-pairing solvation structure of the electrolyte are concluded to bring about reduced charge-transfer resistance at low temperatures, which results in significantly enhanced performance of Li/CFx cells (1690 Wh kg-1 , -60 °C based on active materials). Utilizing 50 mg cm-2 loading electrodes, the Li/CFx still displays 1530 Wh kg-1 at -60 °C. This work provides insights into the electrolyte design that may overcome the operational limits of batteries in extreme environments.

Holistic Design Consideration of Metal-Organic Framework-Based Composite Membranes for Lithium-Sulfur Batteries.

Metal-organic framework (MOF)-based membranes have received significant attention as separators for lithium-sulfur (Li-S) batteries because of their high porosities, well-defined and tailored structures, and other tunable features that are desirable for preventing the "shuttle effect" of soluble polysulfides. Because of the insulating nature of most MOFs, composite membranes are generally constructed by a combination of MOFs and electron-conductive materials. In this work, we examine the property-performance relation between MOF-based separators and Li-S batteries by systematically adjusting the electrical conductivity, thickness, and mass loading of the MOF-based composite. Beyond the commonly referenced trapping or blocking ability of MOFs toward polysulfides, we find that by fixing the thickness of the MOF-based composite coating layer (∼40 µm) on a Celgard membrane, the electrical conductivity of the MOF composite layer is of paramount importance compared with the physical/chemical trapping ability of polysulfides. However, the trapping ability of MOFs becomes indispensable when the thickness of the composite layer is small (e.g., ∼20 µm), indicating the synergetic effects of the adsorption and conversion capabilities of the thin composite layer. This work suggests the importance of a holistic design consideration for a MOF-based membrane for long-life and high-energy-density Li-S batteries.

Large-Scale Production of Hierarchically Porous Metal-Organic Frameworks by a Reflux-Assisted Post-Synthetic Ligand Substitution Strategy.

The mass production of hierarchically porous metal-organic frameworks (HP-MOFs) with adjustable morphology and size as well as retained crystallinity is highly desirable yet challenging. Herein, we have developed a versatile post-synthetic ligand substitution (PSLS) strategy to convert typical microporous MOFs and even their composites to HP-MOFs and their composites at a 10 g level and beyond in a simple reflux system. The resulting HP-MOFs feature intrinsic micropores and abundant defective mesopores, which greatly facilitate the transport and activation of large substrates for stable and efficient heterogeneous catalysis. Furthermore, the presence of defective mesopores in the HP-MOF composites improves activity and selectivity for large molecule-involved one-pot tandem catalysis. This strategy opens a new door to fast, facile, general, and scale-up production of HP-MOFs and related composites for expanding applications of conventional microporous MOF-based materials.

Tailoring Electrolyte Solvation for Li Metal Batteries Cycled at Ultra-Low Temperature.

Lithium metal batteries (LMBs) hold the promise to pushing cell level energy densities beyond 300 Wh kg-1 while operating at ultra-low temperatures (< -30°C). Batteries capable of both charging and discharging at these temperature extremes are highly desirable due to their inherent reduction of external warming requirements. Here we demonstrate that the local solvation structure of the electrolyte defines the charge-transfer behavior at ultra-low temperature, which is crucial for achieving high Li metal coulombic efficiency (CE) and avoiding dendritic growth. These insights were applied to Li metal full cells, where a high-loading 3.5 mAh cm-2 sulfurized polyacrylonitrile (SPAN) cathode was paired with a one-fold excess Li metal anode. The cell retained 84 % and 76 % of its room temperature capacity when cycled at -40 and -60 °C, respectively, which presented stable performance over 50 cycles. This work provides design criteria for ultra-low temperature LMB electrolytes, and represents a defining step for the performance of low-temperature batteries.

Sub-nanometer confinement enables facile condensation of gas electrolyte for low-temperature batteries.

Confining molecules in the nanoscale environment can lead to dramatic changes of their physical and chemical properties, which opens possibilities for new applications. There is a growing interest in liquefied gas electrolytes for electrochemical devices operating at low temperatures due to their low melting point. However, their high vapor pressure still poses potential safety concerns for practical usages. Herein, we report facile capillary condensation of gas electrolyte by strong confinement in sub-nanometer pores of metal-organic framework (MOF). By designing MOF-polymer membranes (MPMs) that present dense and continuous micropore (~0.8 nm) networks, we show significant uptake of hydrofluorocarbon molecules in MOF pores at pressure lower than the bulk counterpart. This unique property enables lithium/fluorinated graphite batteries with MPM-based electrolytes to deliver a significantly higher capacity than those with commercial separator membranes (~500 mAh g-1 vs. <0.03 mAh g-1) at -40 °C under reduced pressure of the electrolyte.

Room temperature ionic liquid-mediated molecularly imprinted polymer monolith for the selective recognition of quinolones in pork samples.

A novel molecularly imprinted polymer monolith was prepared by the room temperature ionic liquid-mediated in situ molecular imprinting technique, using norfloxacin (NOR) as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker. The optimal synthesis conditions and recognition properties of NOR-imprinted monolithic column were investigated. The results indicated that the imprinted monoliths exhibited good ability of selective recognition against the template and its structural analog. Using the fabricated material as solid-phase extraction sorbent, a sample pre-treatment procedure of molecularly imprinted solid-phase extraction coupling with HPLC was developed for determination of trace quinolone residues in animal tissues samples. The recoveries ranging from 78.16 to 93.50% for eight quinolones antibiotics such as marbofloxacin, NOR, ciprofloxacin, danofloxacin, difloxacin, oxolinic acid, flumequine and enrofloxacin were obtained.

Encapsulating soluble active species into hollow crystalline porous capsules beyond integration of homogeneous and heterogeneous catalysis.

Homogeneous molecular catalysts and heterogeneous catalysts possess complementary strengths, and are of great importance in laboratory/commercial procedures. While various porous hosts, such as polymers, carbons, silica, metal oxides and zeolites, have been used in an attempt to heterogenize homogeneous catalysts, realizing the integration of both functions at the expense of discounting their respective advantages, it remains a significant challenge to truly combine their intrinsic strengths in a single catalyst without compromise. Here, we describe a general template-assisted approach to incorporating soluble molecular catalysts into the hollow porous capsule, which prevents their leaching due to the absence of large intergranular space. In the resultant yolk (soluble)-shell (crystalline) capsules, the soluble yolks can perform their intrinsic activity in a mimetic homogeneous environment, and the crystalline porous shells endow the former with selective permeability, substrate enrichment, size-selective and heterogeneous cascade catalysis, beyond the integration of the respective advantages of homogeneous and heterogeneous catalysts.

An ester electrolyte for lithium-sulfur batteries capable of ultra-low temperature cycling.

A novel lithium bis(fluorosulfonyl)imide in a methyl propionate/fluoroethylene carbonate (LiFSI MP/FEC) electrolyte was designed for high compatibility with the Li metal and sulfurized polyacrylonitrile (SPAN). The resulting Li||SPAN cells can charge and discharge at -20 °C and -40 °C with over 91% and 78% room temperature capacity retention.