RESUMO
Experimental design was used for the optimization and robustness testing of an adsorptive stripping voltammetric procedure for kynurenic acid determination. The optimization of the peak height response proceeded through a screening phase (D-optimal design strategy) followed by a response surface study (Doehlert design) applied to the variables pH, pulse amplitude and stirring rate. An interaction between pH and stirring rate was pointed out. The optimized method was validated and the variation of factors that was expected to occur in practice was simulated in a robustness test. A composite fractional matrix for the evaluation of method robustness was used and pH emerged as the only critical factor. The linear range found applying the optimized conditions was 2.5 x 10(-9) to 2.5 x 10(-7) M and the calculated limit of detection was 1.72 x 10(-9) M.