RESUMO
The use of resonant acoustic mixing (RAM) to synthesize variable stoichiometry cocrystals of nicotinamide and vitamin C was investigated. Liquid assisted RAM (LA-RAM) was used to generate two polymorphs, Form I and II, of the 1 : 1 cocrystal of nicotinamide and vitamin C at a 700 mg scale using ethanol and methanol respectively as the liquid additives. LA-RAM was used to scale up polymorphs I and II of the 1 : 1 cocrystal to 20 grams. Finally, LA-RAM used was to produce a high purity 3 : 1 cocrystal of nicotinamide and vitamin C when either methanol or ethanol was used as the liquid additive. LA-RAM is demonstrated to be a scalable, environmentally friendly, ball-free method to make variable stoichiometry cocrystals.
Assuntos
Ácido Ascórbico , Niacinamida , Niacinamida/química , Metanol , Etanol , SolubilidadeRESUMO
Specific surface area (SSA) is an important parameter in drug development that affects other downstream pharmaceutical properties of interest such as reactivity, stability, dissolution, and ultimately bioavailability. Traditionally, the Brunauer-Emmett-Teller (BET) SSA of pharmaceutical powders is measured via gas adsorption (nitrogen or krypton) that is preceded by a prolonged degassing step under low pressure. This degassing step may not be suitable for certain pharmaceutical hydrates that are susceptible to dehydration and phase transformation under reduced pressure and humidity conditions. Therefore, inverse gas chromatography (IGC) was explored as a reliable alternate technique for determining the SSA of model anhydrate-hydrate systems (trehalose and thiamine hydrochloride) that are prone to such phase transformation during SSA measurement. Both trehalose dihydrate and thiamine HCl non-stoichiometric hydrate were found to undergo partial phase transformation to anhydrous forms during BET analysis via degassing and gas adsorption. In contrast, these hydrates remained stable during surface area analysis using IGC owing to measurements under controlled relative humidity. Thus, IGC proved to be a viable technique for SSA measurement of pharmaceutical hydrates without compromising their physical stability.
Assuntos
Trealose , Cromatografia Gasosa/métodos , Umidade , Pós , Tiamina/análogos & derivados , Trealose/químicaRESUMO
Cold crystallization of amorphous pharmaceuticals is an important aspect in the search to stabilize amorphous or glassy compounds used as amorphous pharmaceutical ingredients (APIs). In the present work, we report results for the isothermal crystallization of the compound GDC-0276 based on differential scanning calorimetric and rheometric measurements. The kinetics of isothermal crystallization from the induction time to the completion of crystallization can be described by the classic Johnson-Mehl-Avrami (JMA) equation. The time-temperature-transformation (TTT) diagrams were constructed for two time points-that of induction and that of completion of crystallization. The results show that the rheological measurement for GDC-0276 has a better overall sensitivity in detection of the early stage nucleation and, consequently, detects the onset of crystallization sooner than does the differential scanning calorimetry. Rheological measurements were also used to obtain the temperature dependence of the viscosity of GDC-0276 and the relevant parameters were used in a modified form of the JMA model to describe the temperature dependence of the crystal induction and completion times, that is, the TTT diagram for the material. In the modification, we assumed that the kinetics followed the viscosity to the 0.75 power as suggested by the recent work of Huang et al. (Huang, C., et al., J. Chem. Phys.2018,149, 054503). The relationship and the possible impact on crystallization kinetics of the break-down of the Stokes-Einstein relation in glass-forming liquids are discussed. From the crystallization kinetics modeling, the solid-liquid interfacial surface tension σSL was obtained for GDC-0276 and was compared with that obtained from the melting point depression measurements of the material confined in nanoporous glasses. The differences between the values from the two methods are discussed.
Assuntos
Azetidinas/química , Benzamidas/química , Varredura Diferencial de Calorimetria/métodos , Cristalização/métodos , Vidro/química , Cinética , Reologia/métodos , Temperatura , Termodinâmica , Temperatura de TransiçãoRESUMO
The fragility index ( m) and conversely the strength parameter ( D) are widely used to categorize glass forming liquids and are used to characterize temperature dependency of viscosity and relaxation time as the supercooled liquid approaches glass transition. The currently used calorimetric methods in pharmaceutical literature lead to wide variability in measured values of m. In this work, a modulated differential scanning calorimetry (DSC) method is introduced that can directly determine m with minimal variability. Although calorimetric fragility is easy to measure due to availability and ease of use of DSC, there is no correlation between calorimetric and dielectric fragility (calculated spectroscopically from relaxation times). In addition, there is also no correlation between calorimetric fragility and the so-called "thermodynamic fragility" that can be calculated using only thermodynamic parameters. No relationship can be found between the crystallization propensity in the supercooled liquid state and D. However, the crystallization propensity shows a reasonable correlation with the Kohlrausch distribution parameter ßk, which defines the breadth of the relaxation time distribution.
Assuntos
Varredura Diferencial de Calorimetria/métodos , Química Farmacêutica/métodos , Espectroscopia Dielétrica/métodos , Preparações Farmacêuticas/química , Cristalização , Temperatura , Termodinâmica , ViscosidadeRESUMO
GENE-A, a Nav1.7 inhibitor compound with analgesic activity, was developed as a crystalline anhydrate, for which two polymorphic forms, I and II, were discovered. The two forms were found to possess very similar free energies as determined experimentally with Form II being thermodynamically stable above 25 °C based on solubility measurements. A detailed solid-state characterization was conducted to determine the relative stability of these solid forms, and both thermodynamic and kinetic pathways (slurry bridging and crystallization) were evaluated. Form II was obtained as the final form in competitive slurries at RT. The outcome of crystallization experiments in terms of the solid form obtained was complicated and yielded variable results depending on the form of the starting material and that of the seeds. Form II was reproducibly obtained as the end product in unseeded experiments and in those with Form II as seeds and starting material, while Form I was obtained in all other seeded experiments. On the basis of the experimental data, a controlled crystallization strategy was developed, wherein Form II was used both as starting material and seeds to reproducibly obtain the desired form upon scale-up.
Assuntos
Analgésicos não Narcóticos/química , Composição de Medicamentos/métodos , Bloqueadores do Canal de Sódio Disparado por Voltagem/química , Varredura Diferencial de Calorimetria , Química Farmacêutica , Cristalização/métodos , Canal de Sódio Disparado por Voltagem NAV1.7/metabolismo , Transição de Fase , Solubilidade , Temperatura de TransiçãoRESUMO
PURPOSE: To characterize the distribution of water among various components in a powder blend using solid-state NMR spectroscopy. METHODS: Water sorption behavior of theophylline anhydrate and excipients was determined by dynamic vapor sorption (DVS) and Karl Fischer Titration (KFT) after storing them in humidity chambers for 1 week at room temperature (RT) and calibration curves were generated for water content vs. (1)H T 1 relaxation times. Powder blends (either with microcrystalline cellulose or lactose as diluent) were stored at different relative humidity (RH) conditions and analyzed periodically using solid-state NMR, powder X-ray diffraction, and KFT. RESULTS: Anhydrous theophylline converted to the hydrate at ≥ 84% RH. Based on the calibration curves of water content vs. relaxation times, the distribution of water in the powder blends was estimated. The total water content calculated using ssNMR was in good agreement with values measured using KFT. In blends stored at 90% RH, theophylline anhydrate-to-hydrate conversion did not occur in 1 week. CONCLUSIONS: The distribution of water in multi-component powder blends was successfully determined using correlation between (1)H T 1 relaxation times and total water content. Excipient water sorption inhibited hydrate formation in theophylline at 90% RH. Water distribution was affected by excipient type. The extent of water sorbed by excipients in blends was found to be different than their standalone equilibrium water content.
Assuntos
Excipientes/metabolismo , Espectroscopia de Ressonância Magnética/métodos , Teofilina/metabolismo , Água/metabolismo , Broncodilatadores/análise , Broncodilatadores/metabolismo , Excipientes/análise , Teofilina/análise , Água/análise , Difração de Raios X/métodosRESUMO
The purpose of this study was to identify and characterize precipitates obtained from a liquid formulation of GNE068.HCl, a Genentech developmental compound, and lipophilic excipients, such as propylene glycol monocaprylate, and monolaurate. Precipitates were characterized using powder X-ray diffractometry (PXRD), differential scanning calorimetry, thermogravimetry, microscopy, nuclear magnetic resonance spectroscopy (NMR; solution and solid-state) and water sorption analysis. PXRD and NMR revealed the precipitates to be crystalline solvates of propylene glycol esters. The solvates (capryolate and lauroglycolate) were isomorphic and stable up to 70 °C, beyond which melting of the lattice occurred with subsequent dissolution of the active ingredient in the melt (microscopy and variable temperature PXRD). They were found to be mechanically stable (no change in PXRD pattern upon compression) and were nonhygroscopic up to â¼70% RH (25 °C). Our results highlight the outcome of inadvertent drug-excipient interactions in two separate lipid solution formulations with good solid-state properties and, thus, potential for further development.
Assuntos
Ésteres/química , Lipídeos/química , Propilenoglicol/química , Varredura Diferencial de Calorimetria/métodos , Química Farmacêutica/métodos , Excipientes/química , Espectroscopia de Ressonância Magnética/métodos , Solubilidade , Soluções/química , Temperatura , Termogravimetria/métodos , Difração de Raios X/métodosRESUMO
A variable or non-stoichiometric hydrate of GDC-4379 was developed into a formulated capsule with a 1% drug loading. The water content of this hydrate varied from 0-0.7 moles over the relative humidity (RH) range of 0-98% (25°C). Since a variable state of hydration coupled with rapid equilibration of lattice water with the environmental RH can lead to challenges in formulation development, an analytical method to directly and accurately determine the state of hydration of the active in such a low dose formulation was deemed necessary. Owing to its high selectivity and fast acquisition times, 19F solid-state NMR was effectively utilized to directly determine the lattice water content of the active in the formulated capsule. By correlating Δδ, the chemical shift difference between the isotropic peaks, with the relative humidity and ultimately the lattice water content, the state of hydration of GDC-4379 in the formulated capsule was experimentally determined as 0.63 moles of water/mole of anhydrate.
RESUMO
The purpose of this study was twofold: to identify the growth mechanisms of amorphous nanoparticles in solution and during the drying process at high temperatures, and to guide the process condition and stabilizer selection for amorphous nanoparticle formulations. In contrast to nanocrystals that are mostly mechanically robust, amorphous nanoparticles tend to undergo deformation under stress. As a result, development of a stable formulation and evaluation of the drying process for re-dispersible amorphous nanoparticles presents considerable challenges. Although amorphous nanoparticles have stability issues, they have several pros in terms of production, high monodispersity, and diverse applications in drug delivery. In this study, amorphous nanoparticles were prepared via liquid-liquid phase separation, and their growth mechanisms were investigated both in solution and during the drying process. In solution, particles were found to be susceptible to flocculation, crystallization, coalescence, and Ostwald ripening, with coalescence being a preliminary step providing the driving force for Ostwald ripening. However, during the heat drying process, coalescence and crystallization were found to be the primary mechanisms for particle growth, with Ostwald ripening being negligible due to reduced molecular mobility. The glass transition temperature (Tg) of these amorphous nanoparticles was found to be a crucial factor both in solution and during the drying process. At temperatures < Tg, particles remained in a rigid, glassy state thereby inhibiting coalescence, whereas at or above Tg, particles transition from glassy to rubbery state, making them more susceptible to deformation and coalescence. The mechanistic understanding of particle growth from this study can also be extended to the stabilization of other types of soft nanoparticles.
RESUMO
GNE068, a small organic molecule, was obtained as an amorphous form (GNE068-A) after isolation from ethanol and as a partially disordered form (GNE068-PC) from ethyl acetate. On subsequent characterization, GNE068-PC exhibited a number of properties that were anomalous for a two phase crystalline-amorphous system but consistent with the presence of a solid state phase having intermediate order (mesomorphous). Modulated DSC measurements of GNE068-PC revealed an overlapping endotherm and glass transition in the 135-145 °C range. ΔH of the endotherm showed strong heating rate dependence. Variable temperature XRPD (25-160 °C) revealed structure loss in GNE068-PC, suggesting the endotherm to be an "apparent melt". In addition, gentle grinding of GNE068-PC in a mortar led to a marked decrease in XRPD peak intensities, indicating a "soft" crystalline lattice. Computational analysis of XRPD data revealed the presence of two noncrystalline contributions, one of which was associated with GNE068-A. The second was a variable component that could be modeled as diffuse scattering from local disorder within the associated crystal structure, suggesting a mesomorphous system. Owing to the dominance of the noncrystalline diffuse scattering in GNE068-PC and the observed lattice deformation, the mesomorphous phase exhibited properties consistent with a conformationally disordered mesophase. Because of the intimate association of the residual solvent (ethyl acetate) with the lattice long-range order, loss of solvent on heating through the glass transition temperature of the local disorder caused irrecoverable loss of the long-range order. This precluded the observation of characteristic thermodynamic mesophase behavior above the glass transition temperature.
Assuntos
Biologia Computacional , Compostos Orgânicos/química , Varredura Diferencial de Calorimetria , Cristais Líquidos , Análise Espectral Raman , Temperatura , TermogravimetriaRESUMO
GNE068-PC, a developmental compound, was previously characterized to be mesomorphous, i.e. having long-range order associated with significant local molecular disorder (Chakravarty et. al., Mol. Pharmaceutics, accepted). The compound was exposed to moisture under different relative humidity conditions ranging from 11% to 60% RH at room temperature (RT) for 7 days, and the resultant product phases were characterized. The partially ordered sample progressively lost crystallinity (long-range order) and birefringence (orientational order) upon exposure to increasing RH conditions, leading to the formation of a completely disordered amorphous phase at 60% RH (RT). Long-range positional order was irrecoverable even after moisture removal from the sample exposed to 60% RH. This was attributed to replacement of residual ethyl acetate by water, the former being critical for maintenance of long-range order in the material. In addition, water sorption appeared to irreversibly alter the molecular orientation, thereby affecting sample birefringence. Solid-state NMR revealed increases in (1)H and (13)C spin-lattice relaxation times (T1) going from the mesomorphous phase to the fully amorphous phase. This was indicative of reduction in lattice mobility, likely due to the decreased motion of the aromatic portions of the molecule, in particular C17, which showed the most dramatic increase in (13)C T1. This is likely due to decrease in available free volume upon water sorption. Drying of the hydrated disordered phase showed somewhat greater mobility than the hydrated phase, likely due to increased relative free volume through removal of water. A water-solid interaction therefore irreversibly changed the solid-state makeup of GNE068-PC.
Assuntos
Água/química , Umidade , Espectroscopia de Ressonância Magnética , TemperaturaRESUMO
This special edition of the Journal of Pharmaceutical Sciences is dedicated to Professor Raj Suryanarayanan (Professor and William & Mildred Peters Endowed Chair, University of Minnesota, School of Pharmacy) and honors his extensive and distinguished career as a scientist, educator and mentor. The goal of this commentary is to provide an overview of Professor Suryanarayanan's noteworthy career path and summarize his key research contributions. The commentary concludes with the personal summaries by guest editors.
Assuntos
Mentores , Pesquisa Farmacêutica , Masculino , Humanos , História do Século XXRESUMO
The purpose of this study is to monitor phase transformations in intact trehalose tablets using FT-Raman spectroscopy. Tablets of trehalose dihydrate, amorphous trehalose (obtained by freeze-drying aqueous trehalose solutions), and anhydrous trehalose (beta-trehalose) were prepared. The tablets were exposed to different conditions [11% and 0% RH (60 degrees C); 75% RH (25 degrees C)] and monitored periodically over 96 h using Raman spectroscopy. Within 96 h of storage, the following phase transformations were observed: (1) trehalose dihydrate-->beta-trehalose (11% RH, 60 degrees C), (2) trehalose dihydrate-->alpha-trehalose (0% RH, 60 degrees C), (3) beta-trehalose-->trehalose dihydrate (75% RH, 25 degrees C), and (4) amorphous trehalose-->trehalose dihydrate (75% RH, 25 degrees C). FT-Raman spectroscopy was a useful technique to identify the solid form and monitor multiple-phase transformations in intact trehalose tablets stored at different conditions.
Assuntos
Análise Espectral Raman/métodos , Trealose/química , Cristalização , Transição de Fase , Comprimidos , Difração de Raios XRESUMO
Micro- and nano-carrier formulations have been developed as drug delivery systems for active pharmaceutical ingredients (APIs) that suffer from poor physico-chemical, pharmacokinetic, and pharmacodynamic properties. Encapsulating the APIs in such systems can help improve their stability by protecting them from harsh conditions such as light, oxygen, temperature, pH, enzymes, and others. Consequently, the API's dissolution rate and bioavailability are tremendously improved. Conventional techniques used in the production of these drug carrier formulations have several drawbacks, including thermal and chemical stability of the APIs, excessive use of organic solvents, high residual solvent levels, difficult particle size control and distributions, drug loading-related challenges, and time and energy consumption. This review illustrates how supercritical fluid (SCF) technologies can be superior in controlling the morphology of API particles and in the production of drug carriers due to SCF's non-toxic, inert, economical, and environmentally friendly properties. The SCF's advantages, benefits, and various preparation methods are discussed. Drug carrier formulations discussed in this review include microparticles, nanoparticles, polymeric membranes, aerogels, microporous foams, solid lipid nanoparticles, and liposomes.
RESUMO
Solubilization of new chemical entities for toxicity assessment must use excipients that do not negatively impact drug pharmacokinetics and toxicology. In this study, we investigated the tolerability of a model freebase compound, GDC-0152, solubilized by pH adjustment with succinic acid and complexation with hydroxypropyl-ß-cyclodextrin (HP-ß-CD) to enable intravenous use. Solubility, critical micelle concentration, and association constant with HP-ß-CD were determined. Blood compatibility and potential for hemolysis were assessed in vitro. Local tolerability was assessed after intravenous and subcutaneous injections in rats. A pharmacokinetic study was conducted in rats after intravenous bolus administration. GDC-0152 exhibited pH-dependent solubility that was influenced by self-association. The presence of succinic acid increased solubility in a concentration-dependent manner. HP-ß-CD alone also increased solubility, but the extent of solubility enhancement was significantly lower than succinic acid alone. Inclusion of HP-ß-CD in the solution of GDC-0152 improved blood compatibility, reduced hemolytic potential by â¼20-fold in vitro, and increased the maximum tolerated dose to 80 mg/kg.
Assuntos
2-Hidroxipropil-beta-Ciclodextrina/farmacocinética , Cicloexanos/toxicidade , Avaliação Pré-Clínica de Medicamentos/métodos , Excipientes/farmacocinética , Pirróis/toxicidade , Testes de Toxicidade Aguda/métodos , 2-Hidroxipropil-beta-Ciclodextrina/administração & dosagem , Animais , Cicloexanos/administração & dosagem , Cicloexanos/farmacocinética , Relação Dose-Resposta a Droga , Interações Medicamentosas , Excipientes/administração & dosagem , Hemólise/efeitos dos fármacos , Injeções Intravenosas , Injeções Subcutâneas , Masculino , Dose Máxima Tolerável , Modelos Animais , Pirróis/administração & dosagem , Pirróis/farmacocinética , Ratos , SolubilidadeRESUMO
The purpose of this study was to determine the drug-polymer miscibility of GENE-A, a Genentech molecule, and hydroxypropyl methylcellulose-acetate succinate (HPMC-AS), a polymer, using computational and experimental approaches. The Flory-Huggins interaction parameter,χ, was obtained by calculating the solubility parameters for GENE-A and HPMC-AS over the temperature range of 25-100°C to obtain the free energy of mixing at different drug loadings (0-100%) using the Materials Studio modeling and simulation platform (thermodynamic approach). Solid-state nuclear magnetic spectroscopy (ssNMR) was used to measure the proton relaxation times for both drug and polymer at different drug loadings (up to 60%) at RT (kinetic approach). Thermodynamically, the drug and polymer were predicted to show favorable mixing as indicated by a negative Gibbs free energy of mixing from 25 to 100°C. ssNMR showed near identical relaxation times for both drug and polymer in the solid dispersion at RT and 40°C for a period up to 6 months showing phase mixing between the API and polymer on <10nm scale. Orthogonal computational and experimental approaches indicate phase mixing of the system components.
Assuntos
Preparações Farmacêuticas/química , Polímeros/química , Química Farmacêutica/métodos , Estabilidade de Medicamentos , Metilcelulose/análogos & derivados , Metilcelulose/química , Solubilidade , Tecnologia Farmacêutica/métodos , TermodinâmicaRESUMO
p21-activated kinase 1 (PAK1) has an important role in transducing signals in several oncogenic pathways. The concept of inhibiting this kinase has garnered significant interest over the past decade, particularly for targeting cancers associated with PAK1 amplification. Animal studies with the selective group I PAK (pan-PAK1, 2, 3) inhibitor G-5555 from the pyrido[2,3-d]pyrimidin-7-one class uncovered acute toxicity with a narrow therapeutic window. To attempt mitigating the toxicity, we introduced significant structural changes, culminating in the discovery of the potent pyridone side chain analogue G-9791. Mouse tolerability studies with this compound, other members of this series, and compounds from two structurally distinct classes revealed persistent toxicity and a correlation of minimum toxic concentrations and PAK1/2 mediated cellular potencies. Broad screening of selected PAK inhibitors revealed PAK1, 2, and 3 as the only overlapping targets. Our data suggest acute cardiovascular toxicity resulting from the inhibition of PAK2, which may be enhanced by PAK1 inhibition, and cautions against continued pursuit of pan-group I PAK inhibitors in drug discovery.
Assuntos
Doenças Cardiovasculares/tratamento farmacológico , Inibidores de Proteínas Quinases/farmacologia , Piridinas/farmacologia , Pirimidinas/farmacologia , Quinases Ativadas por p21/antagonistas & inibidores , Doença Aguda , Animais , Relação Dose-Resposta a Droga , Feminino , Camundongos , Camundongos Endogâmicos BALB C , Estrutura Molecular , Inibidores de Proteínas Quinases/síntese química , Inibidores de Proteínas Quinases/química , Piridinas/síntese química , Piridinas/química , Piridonas , Pirimidinas/síntese química , Pirimidinas/química , Relação Estrutura-Atividade , Quinases Ativadas por p21/metabolismoRESUMO
Herein we report on the structure-based discovery of a C-2 hydroxyethyl moiety which provided consistently high levels of selectivity for JAK1 over JAK2 to the imidazopyrrolopyridine series of JAK1 inhibitors. X-ray structures of a C-2 hydroxyethyl analogue in complex with both JAK1 and JAK2 revealed differential ligand/protein interactions between the two isoforms and offered an explanation for the observed selectivity. Analysis of historical data from related molecules was used to develop a set of physicochemical compound design parameters to impart desirable properties such as acceptable membrane permeability, potent whole blood activity, and a high degree of metabolic stability. This work culminated in the identification of a highly JAK1 selective compound (31) exhibiting favorable oral bioavailability across a range of preclinical species and robust efficacy in a rat CIA model.