Outdoor air pollutants exposure associated with pulmonary function and EBC pH value in atopic asthmatic and non-asthmatic children.

OBJECTIVE: Air pollution is associated with the prevalence of respiratory diseases. This study aimed to evaluate the impacts of outdoor air pollutants and indoor Dermatophagoides pteronyssinus 1 (Der p 1) exposure on levels of fractional exhaled nitric oxide (FeNO), exhaled breath condensate (EBC) pH, and pulmonary function in atopic children. METHODS: This study recruited 59 atopic mild-to-moderate asthmatic children and 23 atopic non-asthmatic children. Data on personal characteristics, FeNO, EBC pH, and pulmonary function were collected. Group 1 allergens of Der p 1 were measured on the tops of mattresses and on bedroom floors in the children's homes, and outdoor air pollutant concentrations were estimated from air quality monitoring stations, using the ordinary kriging method. RESULTS: Exposure levels of outdoor air pollutants, except for particulate matter (PM)2.5, for the recruited children met outdoor air quality standards set by the Taiwan Environmental Protection Agency. The lag effect of outdoor PM10 exposure was negatively associated with the forced expiratory volume in one second (FEV1) [(Lag 1: ß=-0.771, p = 0.028), and O3 (Lag 1-7: ß=-2.02, p = 0.04, Lag 1-28: ß=-3.213, p = 0.029)]. Median pulmonary function parameters differed significantly in forced vital capacity (FVC) (p = 0.004) and FEV1 (p = 0.024) values between atopic asthmatic and non-asthmatic children. No association was found between the FeNO/EBC pH level and exposure to Der p 1 allergen and air pollutants in the recruited children. CONCLUSIONS: Outdoor PM10 and O3 exposure was associated with reduction in FEV1 in atopic asthmatic and non-asthmatic children.

Use of urinary hippuric acid and o-/p-/m-methyl hippuric acid to evaluate surgical smoke exposure in operating room healthcare personnel.

Toluene and xylene are common components of surgical smoke, whereas hippuric acid (HA) and methylhippuric acid (MHA) are the products of toluene and xylene metabolism in humans, respectively. HA and MHA can be used as indicators to evaluate the exposure hazards of toluene and xylene. In this study, we used liquid chromatography tandem mass spectrometry (LC-MS/MS) to simultaneously analyze the HA, o-/m-/p-MHA, and creatinine contents in the urine of healthcare personnel. Concentrations of HA and o-/m-/p-MHAs were normalized to those of creatinine and used to analyze urine samples of 160 operating room (OR) healthcare personnel, including administrative staff, surgical nurses, nurse anesthetists, and surgeons. The results showed that the five analytes could be accurately separated and exhibited good linearity (r > 0.9992). The rate of recovery was between 86% and 106%, and the relative standard deviation was less than 5%. Urine from administrative staff presented the highest median concentration of hippuric acid (0.25 g/g creatinine); this was significantly higher than that found in the urine of surgeons (0.15 g/g). The concentrations of urinary o-/m-/p-MHAs in surgical nurses were higher than those in administrative staff, nurse anesthetists, and surgeons. Furthermore, the type, sex, and age of healthcare personnel were associated with changes in urine HA and o-/m-/p-MHA concentrations. Healthcare personnel should be aware of the risk of exposure to surgical smoke.

Sources and components of volatile organic compounds in breast surgery operating rooms.

OBJECTIVES: The composition and concentration distribution of volatile organic compounds (VOCs) in surgical smoke had seldomly been reported. This study aimed to investigate the profile of VOCs and their concentration in surgical smoke from breast surgery during electrocautery in different tissues, electrosurgical units, and electrocautery powers. METHODS: Thirty-eight surgical smoke samples from 23 patients performed breast surgery were collected using evacuated stainless steel canisters. The concentrations of 87 VOCs in surgical smoke samples were analyzed by gas chromatography-mass spectrometry. The human tissues, electrosurgical units, and electrocautery power were recorded. RESULTS: The median level of total VOCs concentrations in surgical smoke samples from mammary glands (total VOCs: 9953.5 ppb; benzene: 222.7 ppb; 1,3-butadiene: 856.2 ppb; vinyl chloride: 3.1 ppb) using conventional electrosurgical knives were significantly higher than that from other tissues (total VOCs: 365.7-4266.8 ppb, P < 0.05; benzene: 26.4-112 ppb, P < 0.05; 1,3-butadiene: 15.6-384 ppb, P < 0.05; vinyl chloride: 0.6-1.8 ppb, P < 0.05) using different electrosurgical units. A high methanol concentration was found in surgical smoke generated during breast surgery (641.4-4452.5 ppb) using different electrosurgical units. An electrocautery power of ≥ 27.5 watts used for skin tissues produced a higher VOCs concentration (2905.8 ppb). CONCLUSIONS: The surgical smoke samples collected from mammary glands using conventional electrosurgical knives had high VOCs concentrations. The carcinogens (including benzene, 1,3-butadiene, and vinyl chloride) and methanol were found in the surgical smoke samples from different electrosurgical units. The type of electrosurgical unit and electrocautery power used affected VOCs concentrations in surgical smoke.

Associations Between Self-Management Behaviors and Psychological Resilience in Patients With COPD.

BACKGROUND: COPD is a common but irreversible disease. Nevertheless, patients with COPD can maintain good quality of life through psychological resilience and effective self-management. However, limited studies have investigated the relationship between self-management behaviors and resilience in patients with COPD. Thus, the present study aimed to determine the factors associated with self-management behaviors and resilience among patients with COPD. METHODS: A total of 100 subjects with COPD were recruited from a medical center in northern Taiwan from February 2020 to January 2021. Each subject completed a questionnaire based on the 20-item COPD Self-Management Scale and 25-item Resilience Scale through a face-to-face interview. A multiple linear regression model that controlled for sociodemographic and clinical factors was used to examine the relationship between self-management behaviors and resilience. RESULTS: Analysis of our data indicated that differences in educational level, smoking status, religion, modified Medical Research Council dyspnea scale score, degree of COPD impacting wellbeing, number of COPD-related hospitalizations within 1 year, and self-reported comorbidities were associated with differences in self-management and resilience scores. The GOLD (Global Initiative for Chronic Obstructive Lung Disease) D group had the lowest scores for self-management and resilience among GOLD groups A, B, C, and D. Self-management and resilience were positively correlated (r = 0.703, P < .001). In the linear regression model, a better self-management value was associated with a higher resilience score (ß = 0.749, P < .001), whereas an increasing resilience score was also associated with a better self-management score (ß = 0.461, P < .001). CONCLUSIONS: This study revealed that self-management and psychological resilience were positively correlated and associated in our linear regression model. Future work may focus on finding the causative relationship between self-management and resilience among patients with COPD.

Removal efficiency of central vacuum system and protective masks to suspended particles from dental treatment.

BACKGROUND: High levels of suspended particulate matters (PMs) and bioaerosols are created by dental procedures. The present study aimed to evaluate the size and concentration of PMs produced by drilling and grinding teeth, and to assess the efficiency of central vacuum system and protective masks for the removal of PMs. METHODS: A total of 20 extracted permanent teeth were collected. A novel experimental system and particle counter were used to evaluate the PMs produced by dental procedures and the PM removal efficiency of a central vacuum system and surgical/N95 masks. RESULTS: The number concentration of total PMs produced by drilling and grinding teeth was significantly higher than the indoor background concentration. The average aerodynamic diameter of particle was generally less than 1 µm. The average number concentration of ultrafine particles was 2.1x1011 particles/m3 during tooth drilling and grinding. The efficiency of the central vacuum system was 35.74% for PM≥0.5 and 35.41% for PM10. For PM≥0.5, the ratios of inside and outside masks were 0.8-1.34 without vacuum and 1.18-1.36 with vacuum. No difference was found with the use of surgical/N95 masks during dental therapy, with or without vacuum use. CONCLUSIONS: High levels of PMs were found during tooth drilling and grinding procedures, especially among PM1. The PM removal efficiency of a central vacuum system and surgical/N95 masks were limited.

Effectiveness of engineering interventions in decreasing worker exposure to metalworking fluid aerosols.

Machine industry accounts for the highest proportion of primary industry in Taiwan. Long-term exposure to metalworking fluid aerosols may pose significant threats to the health of workers. The aims of this study were to verify the efficacy of intervention methods in reducing airborne bacterial concentrations as well as effects on aerosol particle size distribution. This study evaluated airborne bacterial concentrations in a large precision machinery factory in Taichung, Taiwan, before and after the implementation of intervention methods. The installation of local exhaust systems and improvement of the operation mode were used as intervention methods. Concentration and size distribution of bacteria in the metal working environment were assessed using Andersen one-stage and six-stage viable impactors, respectively. The analytical results indicate that most bacterial concentrations were less than the recommended concentrations in the indoor air quality standards (500 CFU/m3) proposed by the United States Association of Advancing Occupational and Environmental Health (US ACGIH) before the installation of local exhaust systems. There was no significant difference in bacterial concentrations before and after the installation of the local exhaust and the intervention effect on reducing bacterial exposure was not as expected. The bacterial concentrations were significantly lowered in the Z region after improving the operation mode. The particle size of bioaerosols <7.0 µm was also substantially reduced. Improper operation modes are likely to expose employees to higher concentrations of bacteria within a short time period. It recommends adjusting the metal processing methods and proper use of air spray guns for decreasing high airborne bacterial concentrations exposure.