Heteroatoms-Doped Mesoporous Carbon Nanosheets with Dual Diffusion Pathways for Highly Efficient Potassium Ion Storage.

The high potassization/depotassization energy barriers and lack of efficient ion diffusion pathways are two serious obstacles for carbon-based materials to achieve satisfactory potassium ion storage performance. Herein, a facile and controllable one-step exfoliation-doping-etching strategy is proposed to construct heteroatoms (N, O, and S)-doped mesoporous few-layer carbon nanosheets (NOS-C). The mixed molten salts of KCl/K2SO4 are innovatively used as the exfoliators, dopants, and etching agents, which enable NOS-C with expanded interlayer spacing and uniformly distributed mesopores with the adjusted electronic structure of surrounding carbon atoms, contributing efficient dual (vertical and horizontal) K-ion diffusion pathways, low potassization/depotassization energy barriers and abundant active sites. Thus, the NOS anodes achieve a high reversible capacity of 516.8 mAh g-1 at 0.05 A g-1, superior rate capability of 202.8 mAh g-1 at 5 A g-1 and excellent long-term cyclic stability, and their practical application potential is demonstrated by the assembled potassium-ion full batteries. Moreover, a surface-interlayer synergetic K+ storage mechanism is revealed by a combined theoretical and experimental approach including in situ EIS, in situ Raman, ex situ XPS, and SEM analysis. The proposed K+ storage mechanism and unique structural engineering provide a new pathway for potassium-ion storage devices and even beyond.

Construction of Inorganic/Polymer Tandem Layer on Li Metal with Long-Term Stability by LiNO3 Concentration Gradient Electrolyte.

Metal electrode with long cycle life is decisive for the actual use of metal rechargeable batteries, while the dendrite growth and side reaction limit their cyclic stability. Herein, the construction of polymer and inorganic-rich SEI tandem layer structure on Li metal can be used for extraordinarily extending its cycle life is reported, which is generated by an in situ PVDF/LiF/LiNO3 (PLL) gel layer on the surface of Li metal with a chemically compatible ether solvent. The cycle life of Li//Li cells with the tandem layer structure is over 6000 h, six times longer than those with LiNO3 homogeneous electrolyte. It highlights the importance of LiNO3 concentration gradient electrolyte formed by the in situ PLL gel layer, in which highly concentrated LiNO3 is confined on the surface of Li metal to generate the uniform and inorganic-rich LiF/Li2O/Li3N layer on the bottom of PVDF/LiF with good mechanical strength, resulting in the dendrite free anode in cell cycling. The assembled Li//LiFePO4 and Li//NMC811 batteries show the capacity retention rate of 80.9% after 800 cycles and 82.3% after 500 cycles, respectively, much higher than those of references.

[Determination of perchlorate and chlorate in drinks by ultra-performance liquid chromatography-tandem mass spectrometry].

OBJECTIVE: To establish a method for determination of perchlorate and chlorate in drinks by ultra-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS) based on isotopic internal standard method. METHODS: The perchlorate and chlorate residue in liquid drinks were extracted with methanol, in solid drinks with acetic acid solution, then centrifuged. The supernatant was cleaned-up with PSA/C18 cleanup tube. The separation of perchlorate and chlorate was carried out on a Acquity CSH fluorophenyl column(100 mm×2.1mm, 1.7 µm) and the detection was performed with tandem mass spectrometry with internal standard method for quantification. RESULTS: The peak area ratio of perchlorate and chlorate had a good linear relationship with their mass concentration within their respective linear ranges, with correlation coefficients(r) greater than 0.999. The limits of detection of perchlorate and chlorate were 0.2and 1 µg/L respectively and the limits of quantification were 0.5 and 3 µg/L respectively. The mean recoveries of two compounds were from 84.0% to 105.5% with relative standard deviations from 4.2% to 17.0% and 82.7% to 112.1% with relative standard deviations from 5.5% to 18.4%(n=6), respectively. The perchlorates in 11 kinds of beverage samples were 0.53-4.12 µg/L, chlorates were 3.27-61.86 µg/L. CONCLUSION: This method is simple, sensitive, accurate and reliable, which is suitable for the determination of perchlorate and chlorate in drinks.

One-Step Synthesis of Chitosan Hydrogel as Electrochemical Chemosensor for Hydrogen Sulfide Detection in Pregnancy-Induced Hypertension Syndrome Serum Sample.

Oxidative stress caused by pregnancy-induced hypertension syndrome significantly affects the health of pregnant women. Hydrogen sulfide is a typical gaseous signal molecule against oxidative stress, and it is of profound significance to develop a detection method. In this study, a stimuli-responsive hydrogel was constructed based on the coordination and bonding principle of metal ions and chitosan (CS) to realize the quantitative detection of hydrogen sulfide (H2S). The chain of CS contains a large number of amino groups and hydroxyl groups, which can form the coordination structure with Cu2+, triggering CS to form a stable hydrogel. The hydrogel can be formed within about 5 s, which has the characteristics of rapid preparation. In the presence of target H2S, the cross-linking agent Cu2+ in the hydrogel can compete out, resulting in the collapse of the hydrogel and the release of the electrochemical probe. By detecting the concentration of the released electrochemical probe, the quantitative detection of H2S can be achieved. The prepared hydrogel has a good linear relationship with the concentration of H2S from 1 µM to 60 µm. At the same time, the hydrogel has good specificity and stability, and it can be applied to the detection of H2S in serum samples.

Development of a new synchronous fluorescence spectrometry combined with Al3+ sensitized for simultaneous and rapid determination of trace flumequine, ciprofloxacin and doxycycline hydrochloride residues in wastewater.

Antibiotics are a new type of environmental pollutants. Due to its wide application in many fields, antibiotic residues are ubiquitous in the wastewater environments. Given their potential threat on water ecosystem functioning and public health, the detection of antibiotic residues in wastewater environments has become very necessary. Based on the complexation of Al3+ with flumequine (FLU), ciprofloxacin (CIP) and doxycycline hydrochloride (DOX), their molecular conjugated area were increased and fluorescence intensity were enhanced, combined with synchronous fluorescence spectrometry (SFS) had good selectivity and high sensitivity, a novel method of Al3+ sensitized synchronous fluorescence spectrometry for the determination of FLU, CIP and DOX residues in wastewater was established. When the wavelength difference (Δλ) was selected 115.0 nm, synchronous fluorescence spectra of the three antibiotics could be well separated and the interference of wastewater matrix were eliminated primely. The new SFS made good use of spectral separation instead of conventional chemical separation, and the actual wastewater sample could be directly determined after simple filtration. The experiment results showed that the concentrations of FLU, CIP and DOX in the range of 0.5000-800.0 ng·mL-1, 0.5000-640.0 ng·mL-1 and 10.00-3500 ng·mL-1 had a good linear relationship with fluorescence intensity. The detection limits of three antibiotics were 0.02054 ng·mL-1, 0.03956 ng·mL-1 and 0.8524 ng·mL-1, respectively. Recovery rates of three antibiotics in wastewater samples were 90.72%-98.23%, 88.68%-95.08% and 85.94%-96.70%. The new SFS established in this experiment had the advantages of simple, rapid, sensitive, accurate and good selectivity. Simultaneous and rapid detection of FLU, CIP and DOX residues in wastewater was successfully realized. It had good application prospects in real-time water quality monitoring.

Dt1 inhibits SWEET-mediated sucrose transport to regulate photoperiod-dependent seed weight in soybean.

Soybean is a photoperiod-sensitive short-day crop whose reproductive period and yield are markedly affected by day-length changes. Seed weight is one of the key traits determining the soybean yield; however, the prominent genes that control the final seed weight of soybean and the mechanisms underlying the photoperiod's effect on this trait remain poorly understood. In this study, we identify SW19 as a major locus controlling soybean seed weight by QTL mapping and determine Dt1, an orthologous gene of Arabidopsis TFL1 that is known to govern the soybean growth habit, as the causal gene of the SW19 locus. We showed that Dt1 is highly expressed in developing seeds and regulates photoperiod-dependent seed weight in soybean. Further analyses revealed that the Dt1 protein physically interacts with the sucrose transporter GmSWEET10a to negatively regulate the import of sucrose from seed coat to the embryo, thus modulating seed weight under long days. However, Dt1 does not function in seed development under short days due to its very low expression. Importantly, we discovered a novel natural allelic variant of Dt1 (H4 haplotype) that decouples its pleiotropic effects on seed size and growth habit; i.e., this variant remains functional in seed development but fails to regulate the stem growth habit of soybean. Collectively, our findings provide new insights into how soybean seed development responds to photoperiod at different latitudes, offering an ideal genetic component for improving soybean's yield by manipulating its seed weight and growth habit.