Characterizing emission factors and oxidative potential of motorcycle emissions in a real-world tunnel environment.

Transportation emissions significantly affect human health, air quality, and climate in urban areas. This study conducted experiments in an urban tunnel in Taipei, Taiwan, to characterize vehicle emissions under real driving conditions, providing emission factors of PM2.5, eBC, CO, and CO2. By applying multiple linear regression, it derives individual emission factors for heavy-duty vehicles (HDVs), light-duty vehicles (LDVs), and motorcycles (MCs). Additionally, the oxidative potential using dithiothreitol assay (OPDTT) was established to understand PM2.5 toxicity. Results showed HDVs dominated PM2.5 and eBC concentrations, while LDVs and MCs influenced CO and CO2 levels. The CO emission factor for transportation inside the tunnel was found to be higher than those in previous studies, likely owing to the increased fraction of MCs, which generally emit higher CO levels. Among the three vehicle types, HDVs exhibited the highest PM2.5 and eBC emission factors, while CO and CO2 levels were relatively higher for LDVs and MCs. The OPDTTm demonstrated that fresh traffic emissions were less toxic than aged aerosols, but higher OPDTTv indicated the impact on human health cannot be ignored. This study updates emission factors for various vehicle types, aiding in accurate assessment of transportation emissions' effects on air quality and human health, and providing a guideline for formulating mitigation strategies.

Measurement of PCNs in sediments collected from reservoir and river in northern Taiwan.

Sediment samples were collected from a large reservoir and a river in northern Taiwan to investigate the occurrence and characteristics of Σ73PCNs analyzed. Results indicate that total concentrations of PCNs (Di- to Octa-CNs) measured in sediments collected in reservoir (29.2 ±â€¯7.11 pg/g-dw) are significantly lower than that of samples collected in river (987 ±â€¯440 pg/g-dw). The increasing trend of PCN concentration from upstream to downstream is found for the sediments collected in reservoir. PCN concentrations measured in surface sediments are relatively higher than that measured in sub-surface sediments collected in reservoir. Tetra-CNs consistently dominate in reservoir sediments, however, Penta-, Tetra- and Mono-CNs dominate in sediments collected at different sampling sites of the river investigated, suggesting that various sources contribute to PCNs collected from river. Indeed, diagnostic ratios indicate that mix-source contribute to PCNs measured in sediments collected from the reservoir and river in northern Taiwan.

Distribution, Fate, Inhalation Exposure and Lung Cancer Risk of Atmospheric Polycyclic Aromatic Hydrocarbons in Some Asian Countries.

A large-scale monitoring program, the Asia Soil and Air Monitoring Program (Asia-SAMP), was conducted in five Asian countries, including China, Japan, South Korea, Vietnam, and India. Air samples were collected using passive air samplers with polyurethane foam disks over four consecutive 3-month periods from September 2012 to August 2013 to measure the seasonal concentrations of 47 polycyclic aromatic hydrocarbons (PAHs), including 21 parent and 26 alkylated PAHs, at 176 sites (11 background, 83 rural, and 82 urban). The annual concentrations of total 47 PAHs (∑47PAHs) at all sites ranged from 6.29 to 688 ng/m(3) with median of 82.2 ng/m(3). Air concentrations of PAHs in China, Vietnam, and India were greater than those in Japan and South Korea. As expected, the air concentrations (ng/m(3)) were highest at urban sites (143 ± 117) followed by rural (126 ± 147) and background sites (22.4 ± 11.4). Significant positive correlations were found between PAH concentrations and atmosphere aerosol optical depth. The average benzo(a)pyrene equivalent concentration (BaPeq) was 5.61 ng/m(3). It was estimated that the annual BaPeq concentrations at 78.8% of the sampling sites exceeded the WHO guideline level. The mean population attributable fraction (PAF) for lung cancer due to inhalation exposure to outdoor PAHs was on the order 8.8‰ (0.056-52‰) for China, 0.38‰ (0.007-3.2‰) for Japan, 0.85‰ (0.042-4.5‰) for South Korea, 7.5‰ (0.26-27‰) for Vietnam, and 3.2‰ (0.047-20‰) for India. We estimated a number of lifetime excess lung cancer cases caused by exposure to PAHs, which the concentrations ranging from 27.8 to 2200, 1.36 to 108, 2.45 to 194, 21.8 to 1730, and 9.10 to 720 per million people for China, Japan, South Korea, Vietnam, and India, respectively. Overall, the lung cancer risk in China and Vietnam were higher than that in Japan, South Korea, and India.

Polybrominated Diphenyl Ethers (PBDEs) in Surface Soils across Five Asian Countries: Levels, Spatial Distribution, and Source Contribution.

A total of 23 polybrominated diphenyl ether (PBDE) congeners were measured in soil samples collected in areas with no known point source [urban/rural/background (U/R/B) sites] and in areas with known point source [brominated flame retardant (BFR)-related industrial sites (F sites) and e-waste recycling sites (E sites)] across five Asian countries. The highest PBDE concentrations were found in BFR-related industrial and e-waste recycling sites. The concentrations of PBDEs in U/R/B sites decreased in the following order: urban > rural > background sites. Total PBDE concentrations were dominated by BDE-209, while BDE-17, -85, -138, -191, -204, and -205 were the least abundant compounds. In both urban sites and rural sites, the mean concentrations of total PBDEs (∑23BDEs) in soils decreased in the following order: Japan > China > South Korea > India > Vietnam. The concentrations of PBDEs in soils were comparable with those reported in other studies. Among the three commercial PBDE mixtures, relatively large contributions of commercial penta-BDE were observed in Vietnam, whereas deca-BDE was the dominant form in mixtures contributing from 55.8 ± 2.5 to 100.0 ± 1.2% of the total PBDEs in soils collected from other four countries. Regression analysis suggested that local population density (PD) is a good indicator of PBDEs in soils of each country. Significant and positive correlation between soil organic content and PBDE level was observed in Chinese soil for most nondeca-BDE homologues with their usage stopped 10 years ago, indicating its important role in controlling the revolatilization of PBDEs from soil and changing the spatial trend of PBDE in soil from the primary distribution pattern to the secondary distribution pattern, especially when primary emission is ceased.

A comprehensive examination of temporal-seasonal variations of PM1.0 and PM2.5 in taiwan before and during the COVID-19 lockdown.

COVID-19 has been a significant global concern due to its contagious nature. In May 2021, Taiwan experienced a severe outbreak, leading the government to enforce strict Pandemic Alert Level 3 restrictions in order to curtail its spread. Although previous studies in Taiwan have examined the effects of these measures on air quality, further research is required to compare different time periods and assess the health implications of reducing particulate matter during the Level 3 lockdown. Herein, we analyzed the mass concentrations, chemical compositions, seasonal variations, sources, and potential health risks of PM1.0 and PM2.5 in Central Taiwan before and during the Level 3 lockdown. As a result, coal-fired boilers (47%) and traffic emissions (53%) were identified as the predominant sources of polycyclic aromatic hydrocarbons (PAHs) in PM1.0, while in PM2.5, the dominant sources of PAHs were coal-fired boilers (28%), traffic emissions (50%), and iron and steel sinter plants (22.1%). Before the pandemic, a greater value of 20.9 ± 6.92 µg/m3 was observed for PM2.5, which decreased to 15.3 ± 2.51 µg/m3 during the pandemic due to a reduction in industrial and anthropogenic emissions. Additionally, prior to the pandemic, PM1.0 had a contribution rate of 79% to PM2.5, which changed to 89% during the pandemic. Similarly, BaPeq values in PM2.5 exhibited a comparable trend, with PM1.0 contributing 86% and 65% respectively. In both periods, the OC/EC ratios for PM1.0 and PM2.5 were above 2, due to secondary organic compounds. The incremental lifetime cancer risk (ILCR) of PAHs in PM2.5 decreased by 4.03 × 10-5 during the pandemic, with PM1.0 contributing 73% due to reduced anthropogenic activities.

Health assessment of emerging persistent organic pollutants (POPs) in PM2.5 in northern and central Taiwan.

Over the last two decades, Taiwan has effectively diminished atmospheric concentrations of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) through the adept utilization of advanced technologies and the implementation of air pollution control devices. Despite this success, there exists a dearth of data regarding the levels of other PM2.5-bound organic pollutants and their associated health risks. To address this gap, our study comprehensively investigates the spatial and seasonal variations, potential sources, and health risks of PCDD/Fs, Polychlorinated biphenyls (PCBs), and Polychlorinated naphthalene (PCNs) in Northern and Central Taiwan. Sampling collections were conducted at three specific locations, including six municipal waste incinerators in Northern Taiwan, as well as a traffic and an industrial site in Central Taiwan. As a result, the highest mean values of PM2.5 (20.3-39.6 µg/m3) were observed at traffic sites, followed by industrial sites (14.4-39.3 µg/m3), and the vicinity of the municipal waste incinerator (12.4-29.4 µg/m3). Additionally, PCDD/Fs and PCBs exhibited discernible seasonal fluctuations, displaying higher concentrations in winter (7.53-11.9 and 0.09-0.12 fg I-TEQWHO/m3) and spring (7.02-13.7 and 0.11-0.16 fg I-TEQWHO/m3) compared to summer and autumn. Conversely, PCNs displayed no significant seasonal variations, with peak values observed in winter (0.05-0.10 fg I-TEQWHO/m3) and spring (0.03-0.08 fg I-TEQWHO/m3). Utilizing a Positive Matrix Factorization (PMF) model, sintering plants emerged as the predominant contributors to PCDD/Fs, constituting 77.9% of emissions. Woodchip boilers (68.3%) and municipal waste incinerators (21.0%) were identified as primary contributors to PCBs, while municipal waste incinerators (64.6%) along with a secondary copper and a copper sludge smelter (22.1%) were the principal sources of PCNs. Moreover, the study specified that individuals aged 19-70 in Northern Taiwan and those under the age of 12 years in Central Taiwan were found to have a significantly higher cancer risk, with values ranging from 9.26 x 10-9-1.12 x 10-7 and from 2.50 x 10-8-2.08 x 10-7respectively.

Using cluster algorithms with a machine learning technique and PMF models to quantify local-specific origins of PM2.5 and associated metals in Taiwan.

The influence of long-range transport (LRT) of air pollutants on neighboring regions and countries has been documented. The magnitude of LRT aerosols and related constituents can misdirect control strategies for local air quality management. In this study, we aimed to quantify PM2.5 (diameter less than 2.5 µm, PM2.5) and associated metals derived from local sources and LRT in different geographic locations in Taiwan using advanced receptor models. We collected daily PM2.5 samples (n = âˆ¼1000) and analyzed 28 metals every three days from 2016 to 2018 in the northern, central-south, eastern, and southern areas of Taiwan. We first used a machine learning technique with a cluster algorithm coupled with a backward trajectory to classify local, regional, and LRT-related aerosols. We then quantified the source contributions with a positive matrix factorization (PMF) model for Taiwan weighted by region-specific populations. The northern and eastern regions were found to be more vulnerable to LRT-related PM2.5 and metals than the central-south and southern regions in Taiwan. The LRT increased Pb and As concentrations by 90-200% and ∼40% in the northern and central-south regions. Ambient PM2.5-metals mainly originated from local traffic-related emissions in the northern, central-south, and southern regions, whereas oil combustion was the primary source of PM2.5-metals in the eastern region. By subtracting the influence from the LRT, the contributions of domestic emission sources to ambient PM2.5 metals in Taiwan were 35% from traffic-related emission, 17% from non-ferrous metallurgy, 13% from iron ore and steel factories, 12% from coal combustion, 12% from oil combustion, 10% from incinerator emissions, and <1% from cement manufacturing emissions. This study proposed an advanced method for refining local source contributions to ambient PM2.5 metals in Taiwan, which provides useful information on regional control strategies.

Impacts of COVID-19's restriction measures on personal exposure to VOCs and aldehydes in Taipei City.

The Coronavirus Disease 2019 (COVID-19) pandemic provided an unprecedented natural experiment, that allowed us to investigate the impacts of different restrictive measures on personal exposure to specific volatile organic compounds (VOCs) and aldehydes and resulting health risks in the city. Ambient concentrations of the criteria air pollutants were also evaluated. Passive sampling for VOCs and aldehydes was conducted for graduate students and ambient air in Taipei, Taiwan, during the Level 3 warning (strict control measures) and Level 2 alert (loosened control measures) of the COVID-19 pandemic in 2021-2022. Information on the daily activities of participants and on-road vehicle counts nearby the stationary sampling site during the sampling campaigns were recorded. Generalized estimating equations (GEE) with adjusted meteorological and seasonal variables were used to estimate the effects of control measures on average personal exposures to the selected air pollutants. Our results showed that ambient CO and NO2 concentrations in relation to on-road transportation emissions were significantly reduced, which led to an increase in ambient O3 concentrations. Exposure to specific VOCs (benzene, methyl tert-butyl ether (MTBE), xylene, ethylbenzene, and 1,3-butadiene) associated with automobile emissions were remarkably decreased by ~40-80 % during the Level 3 warning, resulting in 42 % and 50 % reductions of total incremental lifetime cancer risk (ILCR) and hazard index (HI), respectively, compared with the Level 2 alert. In contrast, the exposure concentration and calculated health risks in the selected population for formaldehyde increased by ~25 % on average during the Level 3 warning. Our study improves knowledge of the influence of a series of anti-COVID-19 measures on personal exposure to specific VOCs and aldehydes and its mitigations.

Estimating the daily average concentration variations of PCDD/Fs in Taiwan using a novel Geo-AI based ensemble mixed spatial model.

It is generally established that PCDD/Fs is harmful to human health and therefore extensive field research is necessary. This study is the first to use a novel geospatial-artificial intelligence (Geo-AI) based ensemble mixed spatial model (EMSM) that integrates multiple machine learning algorithms and geographic predictor variables selected using SHapley Additive exPlanations (SHAP) values to predict spatial-temporal fluctuations in PCDD/Fs concentrations across the entire island of Taiwan. Daily PCDD/F I-TEQ levels from 2006 to 2016 were used for model construction, while external data was used for validating model dependability. We utilized Geo-AI, incorporating kriging, five machine learning, and ensemble methods (combinations of the aforementioned five models) to develop EMSMs. The EMSMs were used to estimate long-term spatiotemporal variations in PCDD/F I-TEQ levels, considering in-situ measurements, meteorological factors, geospatial predictors, social and seasonal influences over a 10-year period. The findings demonstrated that the EMSM was superior to all other models, with an increase in explanatory power reaching 87 %. The results of spatial-temporal resolution show that the temporal fluctuation of PCDD/F concentrations can be a result of weather circumstances, while geographical variance can be the result of urbanization and industrialization. These results provide accurate estimates that support pollution control measures and epidemiological studies.

Assessment of heavy metals among auto workers in metropolitan city: a case study.

In recent decades, heavy metals (HMs) have emerged as a global health concern. Unfortunately, in Pakistan, there is a general lack of awareness regarding the potential health risks associated with HMs pollution among automobile workers. Herein, we investigated the concentration of heavy metals such as lead (Pb), cadmium (Cd), and chromium (Cr) among automobile workers who were occupationally exposed in Mingora City, Khyber Pakhtunkhwa, Pakistan. Three different automobile groups, i.e., battery recyclers, spray painters, and mechanics were studied in detail. A total of 40 blood samples were collected from automobile workers groups while 10 blood samples were collected as control individuals from different locations in the study area. We investigated heavy metals concentration with a standard method using an atomic absorption spectrometer AAS (PerkinElmer Analyst 700, United States). Based on our findings, the battery recycling group displayed the most elevated Pb levels (5.45 ± 2.11 µg/dL), exceeding those of both the spray painters' group (5.12 ± 1.98 µg/dL) and the mechanics' group (3.79 ± 2.21 µg/dL). This can be attributed to their higher exposure to Pb pollution resulting from the deterioration, dismantling, grinding, or crushing of old batteries. In the context of chromium (Cr) exposure, a similar trend was observed among the battery recycling group, as well as the spray painters and mechanics groups. However, in the case of cadmium (Cd), the mechanics' group exhibited the highest level of exposure (4.45 ± 0.65 µg/dL), surpassing the battery recycling group (1.17 ± 0.45 µg/dL) and the spray painters' group (1.35 ± 0.69 µg/dL), which was attributed to their greater exposure to welding fumes and other activities in their workplace. We believe that our findings will encourage regulatory measures to improve the health of automobile workers. However, further work is needed to determine various health-related issues associated with heavy metal exposure among automobile workers.

Evaluation of atmospheric PCDD/F depositions via automated and traditional water surface samplers in Taiwan.

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are a group of compounds of major environmental concern. Once emitted into the atmosphere, PCDD/Fs undergo photochemical reactions and enter other environmental compartments via wet and dry deposition. In this study, atmospheric PCDD/F depositions were collected via an automated PCDD/F deposition sampler and traditional cylindrical vessels, respectively, in northern, central, and southern Taiwan from 2008 to 2010. The automated PCDD/F precipitation sampler used in this study can prevent both resuspension and photodegradation of the PCDD/Fs collected and also effectively separates the PCDD/F samples into dry and wet contributions. The results indicate that the average atmospheric PCDD/F concentrations collected by the high-volume sampling trains were 13.6 ± 10 (n = 10), 15.6 ± 5.2 (n = 7), and 10.9 ± 6.3 (n = 6) fg I-TEQ/m(3) in northern, central, and southern Taiwan, respectively. In addition, the results also indicate that the PCDD/F deposition flux collected with an automated PCDD/F sampler (1.84 ± 0.90-8.68 ± 5.1 pg I-TEQ/m(2)/day, n = 23) is significantly higher than that sampled with cylindrical vessels (1.11 ± 0.69-5.64 ± 5.2 pg I-TEQ/m(2)/day, n = 23). Based on the Mann-Whitney statistical analysis, the p value (0.037) of PCDD/F deposition flux between those two samplers measurement is lower than 0.05. The difference is attributed to the fact that part of the PCDD/F depositions collected by traditional cylindrical vessels is photodegraded and revolatilized. In addition, the wet deposition flux of PCDD/Fs (3.66 to 470 pg I-TEQ/m(2)/rainy day, n = 23) observed in Taiwan is significantly higher than the dry deposition flux (0.38 to 4.55 pg I-TEQ/m(2)/sunny day, n = 23). The results demonstrate that the wet deposition is the major PCDD/F removal mechanism in the atmosphere. Furthermore, the overall PCDD/Fs deposition velocity and scavenging (rainout) coefficient in Taiwan are calculated as 0.20 ± 0.07 cm/s and 6.5 ± 0.2 × 10(4), respectively.

Characteristics of PM and PAHs emitted from a coal-fired boiler and the efficiencies of its air pollution control devices.

Sampling and analysis of filterable particulate matter (FPM), FPM2.5, condensable particulate matter (CPM), polycyclic aromatic hydrocarbons (PAHs), sulfur oxides (SOx), and nitrogen oxides (NOx) emitted from a coal-fired boiler equipped with selective catalytic reduction (SCR)+ electrostatic precipitator (ESP) + wet flue gas desulfurization (WFGD) + wet electrostatic precipitator (WESP) as air pollution control devices (APCDs) are conducted. The results show that NOx concentration emitted from the coal-fired boiler is 56 ± 2.17 ppm (with the NOx removal efficiency of 47.2%), which does not meet the best available control technology (BACT) emission standard (≤ 30 ppm). On the other hand, the WFGD adopted has a good removal efficiency for SOx and HCl. Both SOx and HCl emission concentrations are < 1 ppm, and removal efficiencies are > 99%. The FPM and FPM2.5 emitted from the coal-fired boiler are 0.9 ± 0.06 mg/Nm3 and < 0.09 ± 0.006 mg/Nm3, respectively. The overall removal efficiency of FPM achieved with ESP+WFGD+WESP+MGGH is 99.98%. However, high concentration of CPM (37.4 ± 6.3 mg/Nm3) is measured, which is significantly higher than FPM and FPM2.5. The concentrations of 27 PAHs at the WESP inlet and stack are measured as 667 ng/Nm3 and 547 ng/Nm3, respectively while the removal efficiencies of gas- and solid-phase PAHs are 9% and 58%, respectively. The results show that APCDs adopted are not effective in removing PAHs (only 18%), and gas-phase PAHs contribute the most in the total PAH emission. In addition, the benzo(a)pyrene equivalent (BaPeq) concentration emitted from the stack is 28.8 ng-BaPeq/Nm3, and most of it is contributed by 4-6 ring PAHs with high toxic equivalent factors (TEFs). Furthermore, the emission factors of air pollutant emitted from coal-fired boilers equipped with different combinations of APCDs are compiled and compared. The results show that except for CPM and NOx, the emission factors of air pollutant calculated for this coal-fired boiler are lower if compared with other studies.Implications: Primary particles discharged from coal-fired processes include filterable particulate matter (FPM) and condensable particulate matter (CPM). PM2.5 emissions would be greatly underestimated if CPM is ignored. Polycyclic aromatic hydrocarbons (PAHs) are semi-volatile organic compounds (SVOCs) formed by two or more fused benzene rings. PAHs have attracted much public attention because of toxicity and carcinogenicity. This study selects one coal-fired boiler with the best available control technology (BACT) to simultaneously measure the concentrations of PM, PAHs, and gaseous pollutants at the inlet and outlet of air pollution control devices (APCDs) to understand the efficacy of APCDs adopted and pollutant emission intensity.

Sub-toxic events induced by truck speed-facilitated PM2.5 and its counteraction by epigallocatechin-3-gallate in A549 human lung cells.

To distinguish the influences of fuel type and truck speed on chemical composition and sub-toxic effects of particulates (PM2.5) from engine emissions, biomarkers-interleukin-6 (IL-6), cytochrome P450 (CYP) 1A1, heme oxygenase (HO)-1, and NADPH-quinone oxidoreductase (NQO)-1-were studied in A549 human lung cells. Fuel type and truck speed preferentially affected the quantity and ion/polycyclic aromatic hydrocarbon (PAH) composition of PM2.5, respectively. Under idling operation, phenanthrene was the most abundant PAH. At high speed, more than 50% of the PAHs had high molecular weight (HMW), of which benzo[a]pyrene (B[a]P), benzo[ghi]perylene (B[ghi]P), and indeno[1,2,3-cd]pyrene (I[cd]P) were the main PAHs. B[a]P, B[ghi]P, and I[cd]P caused potent induction of IL-6, CYP1A1, and NQO-1, whereas phenanthrene mildly induced CYP1A1. Based on the PAH-mediated induction, the predicted increases in biomarkers were positively correlated with the measured increases. HMW-PAHs contribute to the biomarker induction by PM2.5, at high speed, which was reduced by co-exposure to epigallocatechin-3-gallate.

Effect of triclosan on the pathogenesis of allergic diseases among children.

BACKGROUND: Few studies have assessed associations between allergic diseases and antibacterial agents in Taiwanese children. OBJECTIVE: This study aimed to investigate the association of triclosan (TCS) exposure with allergic diseases among preschoolers, disease-specific IgE titers, and a child's sex. METHODS: Pediatric data were obtained from the Childhood Environment and Allergic Diseases Study (CEAS; 2010) cohort, and their urine and blood samples were used to analyze TCS and IgE concentrations (age 3 group). Three years later, clinical data were obtained again from the age 3 group (age 6 group). Correlations of TCS levels at ages 3 and 6 years with IgE levels and allergic diseases were evaluated. RESULTS: The TCS levels were higher at age 3 than at age 6 (geometric mean, 1.05 ng/ml vs 0.37 ng/ml). TCS levels were positively correlated with serum IgE levels at ages 3 and 6 years. Asthma and atopic dermatitis were significantly associated with TCS (adjusted OR 1.14, 95% confidence interval [CI] 1.01-1.29; OR 1.22, 95% CI 1.05-1.41). Sex-stratified analysis revealed that TCS levels were positively correlated with IgE levels among boys in the age 6 group and significantly associated with asthma, allergic rhinitis, and atopic dermatitis among boys. SIGNIFICANCE: TCS exposure is associated with IgE levels and a potentially high risk of pediatric atopic disorders.

Characteristics and health impacts of PM2.5-bound PCDD/Fs in three Asian countries.

Polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) were ubiquitous, persistent chemical compounds attached to particulate matter in the atmosphere. We aimed to study the characteristics of these pollutants in atmospheric PM2.5 of three Asian countries, including Taiwan (Taipei), Thailand (Chiang Mai), and Vietnam (Hanoi). We carried out a source apportionment analysis to determine significant PCDD/F contributors in these areas. Multiple media model was conducted to access the health impact assessment. The PM2.5 concentration in Taipei (n = 7), Chiang Mai (n = 20), and Hanoi (n = 10) were 18.4 ± 6.21 µg/m3, 133 ± 49.5 µg/m3, and 88.1 ± 12.6 µg/m3, respectively. The PCDD/Fs level in Hanoi was 92.4 ± 67.3 fg I-TEQ/m3, and in Taipei and Chiang Mai was 5.01 ± 2.39 fg I-TEQ/m3 and 14.4 ± 13.1 fg I-TEQ/m3, respectively, which showed that the higher PM2.5 concentration was not necessary to follow with higher PCDD/Fs level. In all three cities, the effect of traffic on ambient PCDD/F level was significant (23-25 %). However, we also observed the specific sources of PCDD/Fs in each city during the sampling periods, namely long-range transport (Taipei, 55 %), Biomass/open burning (Chiang Mai, 77 %), and industrial activities (Hanoi, 34 %). In the carcinogenic risk estimation, the highest median total carcinogenic risk was in Hanoi (5.87 × 10-6), followed by Chiang Mai (1.06x10-6), and Taipei (2.95 × 10-7). Although diet was the major absorption pathway, the food contributor of exposure differed among the three areas due to the difference in food consumption composition.

Interactions of chemical components in ambient PM2.5 with influenza viruses.

The significance of this work is that ambient PM2.5 is a direct transmission mode for influenza virus infection to the human alveolar epithelium. The concentration of PM2.5 was 11.7 ± 5.5 µg/m3 in Taipei during 24 December 2019-13 January 2020. Approximately 79% of inhaled PM2.5 is able to reach the upper-to-lower airway, and 47% of PM2.5 is able to reach the alveolar epithelium for influenza virus infection. Influenza A and B viruses were detected in PM2.5 on 9 days, and the influenza A/H5 virus was detected on 15 days during the study period. FL and Pyr were negatively correlated with the influenza A virus. D(ah)P and Acp were positively correlated with the influenza B and A/H5 viruses, respectively. Cd, V, and Zn were positively correlated with the influenza A, B, and A/H5 viruses, respectively. Next, influenza A, B, and A/H5 viral plasmids interacted with carbon black, H2O2, DEPs, and UD. We observed that H2O2 significantly decreased levels of complementary DNA of the three influenza viruses. DEPs and UD significantly decreased influenza A and A/H5 viral levels. In conclusion, chemicals in PM2.5 may play vital roles in terms of viable influenza virus in the atmosphere.

Chemically and temporally resolved oxidative potential of urban fine particulate matter.

Vehicle emissions are an important source of particulate matter (PM) in urban areas and have well-known adverse health effects on human health. Oxidative potential (OP) is used as a quantification metric for indexing PM toxicity. In this study, by using a liquid spot sampler (LSS) and the dithiothreitol (DTT) assay, the diurnal OP variation was assessed at a ground-level urban monitoring station. Besides, since the monitoring station was adjacent to the main road, the correlation between OP and traffic volume was also evaluated. PM components, including metals, water-soluble inorganic aerosols (WSIAs), black carbon (BC), and polycyclic aromatic hydrocarbons (PAHs), were also simultaneously monitored. The daytime and evening mean ±â€¯std volume-normalized OP (OPv) were 0.46 ±â€¯0.27 and 0.48 ±â€¯0.26 nmol/min/m3, and exhibited good correlations with PM1.0 and BC; however, these concentrations were only weakly correlated with mass-normalized OP (OPm). The mean ±â€¯std OPm was higher in the daytime (41.3 ±â€¯13.8 pmol/min/µg) than in the evening (36.1 ±â€¯11.5 pmol/min/µg). According to the PMF analysis, traffic emissions dominated the diurnal OP contribution. Organic matter and individual metals associated with non-exhaust traffic emissions, such as Mn, Fe, and Cu, contributed substantially to OP. Diurnal variations of PAH concentrations suggest that photochemical reactions could enhance OP, highlighting the importance of atmospheric aging on PM toxicity.

Characteristics of PCDD/Fs in PM2.5 from emission stacks and the nearby ambient air in Taiwan.

This study aimed to find the characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in fine particulate matter from different stationary emission sources (coal-fired boiler, CFB; municipal waste incinerator, MWI; electric arc furnace, EAF) in Taiwan and the relationship between PM2.5 and PM2.5-bound PCDD/Fs with Taiwanese mortality risk. PM2.5 was quantified using gravimetry and corresponding chemical analyses were done for PM2.5-bound chemicals. Mortality risks of PM2.5 exposure and PCDD/Fs exposure were calculated using Poisson regression. The highest concentration of PM2.5 (0.53 ± 0.39 mg/Nm3) and PCDD/Fs (0.206 ± 0.107 ng I-TEQ/Nm3) was found in CFB and EAF, respectively. Higher proportions of PCDDs over PCDFs were observed in the flue gases of CFB and MWI whereas it was reversed in EAF. For ambient air, PCDD/F congeners around the stationary sources were dominated by PCDFs in vapor phase. Positive matrix factorization (PMF) analysis found that the sources of atmosphere PCDD/Fs were 14.6% from EAF (r = 0.81), 52.6% from CFB (r = 0.74), 18.0% from traffic (r = 0.85) and 14.8% from MWI (r = 0.76). For the dioxin congener distribution, PCDDs were dominant in flue gases of CFB and MWI, PCDFs were dominant in EAF. It may be attributed to the different formation mechanisms among wastes incineration, steel-making, and coal-burning processes.

Particulate matter and SARS-CoV-2: A possible model of COVID-19 transmission.

Coronavirus disease 2019 (COVID-19), an acute respiratory disease caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has rapidly developed into a pandemic throughout the world. This disease is a highly infectious novel coronavirus and can affect people of all ages. Previous reports observed that particulate matter (PM) provided a platform for intermixing with viruses (i.e., influenza). However, the role of PM in SARS-CoV-2 transmission remains unclear. In this paper, we propose that PM plays a direct role as a "carrier" of SARS-CoV-2. SARS-CoV-2 is reported to have a high affinity for the angiotensin-converting enzyme 2 (ACE2) receptor. Indirectly, exposure to PM increases ACE2 expression in the lungs which facilitates SARS-CoV-2 viral adhesion. Thus, the high risk of SARS-CoV-2 in heavily polluted regions can be explained by upregulation of ACE2 caused by PM. PM could be both a direct and indirect transmission model for SARS-CoV-2 infection.

Integrated analysis of source-specific risks for PM2.5-bound metals in urban, suburban, rural, and industrial areas.

The levels and characteristics of atmospheric metals vary in time and location, can result in various health impacts, which increases the challenge of air quality management. We aimed to investigate PM2.5-bound metals in multiple locations and propose a methodology for comparing metal elements across study regions and prioritizing source contributions through integrated health risk assessments. PM2.5-bound metals were collected in the urban, suburban, rural, and industrial regions of Taiwan between 2016 and 2018. We incorporated the positive matrix factorization (PMF) with health risk assessments (considering estimates of the margin of exposure (MOE) and excess cancer risk (ECR)) to prioritize sources for control. We found that the concentrations of Fe, Zn, V, Cu, and Mn (industry-related metals) were higher at the industrial site (Kaohsiung) and Ba, Cr, Ni, Mo, and Co (traffic-related metals) were higher at the urban site (Taipei). The rural site (Hualian) had good air quality, with low PM2.5 and metal concentrations. Most metal concentrations were higher during the cold season for all study sites, except for the rural. Ambient concentrations of Mn, Cr, and Pb obtained from all study sites presents a higher health risk of concern. In Kaohsiung, south Taiwan, PM2.5-bound metals from the iron ore and steel factory is suggested as the first target for control based on the calculated health risks (MOE < 1 and ECR > 10-6). Overall, we proposed an integrated strategy for initiating the source management prioritization of PM2.5-bound metals, which can aid an effort for policymaking.