Strain engineering and epitaxial stabilization of halide perovskites.

Strain engineering is a powerful tool with which to enhance semiconductor device performance1,2. Halide perovskites have shown great promise in device applications owing to their remarkable electronic and optoelectronic properties3-5. Although applying strain to halide perovskites has been frequently attempted, including using hydrostatic pressurization6-8, electrostriction9, annealing10-12, van der Waals force13, thermal expansion mismatch14, and heat-induced substrate phase transition15, the controllable and device-compatible strain engineering of halide perovskites by chemical epitaxy remains a challenge, owing to the absence of suitable lattice-mismatched epitaxial substrates. Here we report the strained epitaxial growth of halide perovskite single-crystal thin films on lattice-mismatched halide perovskite substrates. We investigated strain engineering of α-formamidinium lead iodide (α-FAPbI3) using both experimental techniques and theoretical calculations. By tailoring the substrate composition-and therefore its lattice parameter-a compressive strain as high as 2.4 per cent is applied to the epitaxial α-FAPbI3 thin film. We demonstrate that this strain effectively changes the crystal structure, reduces the bandgap and increases the hole mobility of α-FAPbI3. Strained epitaxy is also shown to have a substantial stabilization effect on the α-FAPbI3 phase owing to the synergistic effects of epitaxial stabilization and strain neutralization. As an example, strain engineering is applied to enhance the performance of an α-FAPbI3-based photodetector.

A fabrication process for flexible single-crystal perovskite devices.

Organic-inorganic hybrid perovskites have electronic and optoelectronic properties that make them appealing in many device applications1-4. Although many approaches focus on polycrystalline materials5-7, single-crystal hybrid perovskites show improved carrier transport and enhanced stability over their polycrystalline counterparts, due to their orientation-dependent transport behaviour8-10 and lower defect concentrations11,12. However, the fabrication of single-crystal hybrid perovskites, and controlling their morphology and composition, are challenging12. Here we report a solution-based lithography-assisted epitaxial-growth-and-transfer method for fabricating single-crystal hybrid perovskites on arbitrary substrates, with precise control of their thickness (from about 600 nanometres to about 100 micrometres), area (continuous thin films up to about 5.5 centimetres by 5.5 centimetres), and composition gradient in the thickness direction (for example, from methylammonium lead iodide, MAPbI3, to MAPb0.5Sn0.5I3). The transferred single-crystal hybrid perovskites are of comparable quality to those directly grown on epitaxial substrates, and are mechanically flexible depending on the thickness. Lead-tin gradient alloying allows the formation of a graded electronic bandgap, which increases the carrier mobility and impedes carrier recombination. Devices based on these single-crystal hybrid perovskites show not only high stability against various degradation factors but also good performance (for example, solar cells based on lead-tin-gradient structures with an average efficiency of 18.77 per cent).

Atomically Precise Control of Carbon Insertion into hBN Monolayer Point Vacancies using a Focused Electron Beam Guide.

Precise controlled filling of point vacancies in hBN with carbon atoms is demonstrated using a focused electron beam method, which guides mobile C atoms into the desired defect site. Optimization of the technique enables the insertion of a single C atom into a selected monovacancy, and preferential defect filling with sub-2 nm accuracy. Increasing the C insertion process leads to thicker 3D C nanodots seeded at the hBN point vacancy site. Other light elements are also observed to bind to hBN vacancies, including O, opening up a wide range of complex defect structures that include B, C, N, and O atoms. The ability to selectively fill point vacancies in hBN with C atoms provides a pathway for creating non-hydrogenated covalently bonded C molecules embedded in the insulating hBN.

Mussel-Inspired Multiloop Polyethers for Antifouling Surfaces.

Despite the widespread use of polymers for antifouling coatings, the effect of the polymeric topology on the antifouling property has been largely underexplored. Unlike conventional brush polymers, a loop conformation often leads to strong steric stabilization of surfaces and antifouling and lubricating behavior owing to the large excluded volume and reduced chain ends. Herein, we present highly antifouling multiloop polyethers functionalized with a mussel-inspired catechol moiety with varying loop dimensions. Specifically, a series of polyethers with varying catechol contents were synthesized via anionic ring-opening polymerization by using triethylene glycol glycidyl ether (TEG) and catechol-acetonide glycidyl ether (CAG) to afford poly(TEG-co-CAG)n. The versatile adsorption and antifouling effects of multiloop polyethers were evaluated using atomic force microscopy and a quartz crystal microbalance with dissipation. Furthermore, the crucial role of the loop dimension in the antifouling properties was analyzed via a surface force apparatus and a cell attachment assay. This study provides a new platform for the development of versatile antifouling polymers with varying topologies.

Charge-transfer-induced 2D ferromagnetism and realization of thermo-remnant memory effect in ultrathinß-NiOOH-encapsulated graphene.

For graphene-based 2D materials, charge transfer at the interface between graphene and ferromagnetic metal leads to many intriguing phenomena. However, because of the unidirectional spin orientation in ferromagnetic transition metals, interface interaction plays a detrimental role in diminishing the magnetic parameters on 2D surfaces. To overcome this issue, we have synthesized ultrathin 2D weak antiferromagneticß-NiOOH layers on a graphene surface. By exploiting the charge transfer effect and tuning the thickness of the thinß-NiOOH layers, conversion of ferromagnetism along with giant coercivity and the thermo-remnant magnetic memory effect were observed. As antiferromagnets have two spin orientations, transfer of charge at the interface breaks the nullifying effect of zero magnetization in antiferromagnets and the combined system behaves like a 2D ferrimagnet. Whenever, the sandwich structure ofß-NiOOH/graphene/ß-NiOOH is formed, it also shows interlayer exchange coupling those results in huge exchange bias and anomalous temperature dependence of coercivity. Due to the strong exchange interaction between the layers, the combined system also shows a robust temperature-based memory effect. Spin-polarized density functional theory was also calculated to confirm the interface interaction and its quantitative evaluation by means of Bader charge analysis and charge-density mapping.

A Cost-Effective CNN-LSTM-Based Solution for Predicting Faulty Remote Water Meter Reading Devices in AMI Systems.

Automatic meter infrastructure (AMI) systems using remote metering are being widely used to utilize water resources efficiently and minimize non-revenue water. We propose a convolutional neural network-long short-term memory network (CNN-LSTM)-based solution that can predict faulty remote water meter reading (RWMR) devices by analyzing approximately 2,850,000 AMI data collected from 2762 customers over 360 days in a small-sized city in South Korea. The AMI data used in this study is a challenging, highly unbalanced real-world dataset with limited features. First, we perform extensive preprocessing steps and extract meaningful features for handling this challenging dataset with limited features. Next, we select important features that have a higher influence on the classifier using a recursive feature elimination method. Finally, we apply the CNN-LSTM model for predicting faulty RWMR devices. We also propose an efficient training method for ML models to learn the unbalanced real-world AMI dataset. A cost-effective threshold for evaluating the performance of ML models is proposed by considering the mispredictions of ML models as well as the cost. Our experimental results show that an F-measure of 0.82 and MCC of 0.83 are obtained when the CNN-LSTM model is used for prediction.

Intrinsically Linear Transistor for Millimeter-Wave Low Noise Amplifiers.

Transistors are the backbone of any electronic and telecommunication system but all known transistors are intrinsically nonlinear introducing signal distortion. Here, we demonstrate a novel transistor with the best linearity achieved to date, attained by sequential turn-on of multiple channels composed of a planar top-gate and several trigate Fin field-effect transistors (FETs), using AlGaN/GaN structures. A highly linearized transconductance plateau of >6 V resulted in a record linearity figure of merit OIP3/PDC of 15.9 dB at 5 GHz and a reduced third-order intermodulation power by 400× in reference to a conventional planar device. The proposed architecture also features an exceptional performance at 30 GHz with an OIP3/PDC of ≥8.2 dB and a minimum noise figure of 2.2 dB. The device demonstrated on a scalable Si substrate paves the way for GaN low noise amplifiers (LNAs) to be utilized in telecommunication systems, and is also translatable to other material systems.

Stand-Alone Posterior Expandable Cage Technique for Adjacent Segment Degeneration with Lumbar Spinal Canal Stenosis: A Retrospective Case Series.

Background and Objectives: Symptomatic adjacent segment degeneration (ASD) with lumbar spinal canal stenosis (LSCS) is a common complication after spinal intervention, particularly interbody fusion. Stand-alone posterior expandable cages enable interbody fusion with preservation of the previous operation site, and screw-related complications are avoided. Thus, the aim of this study was to investigate the clinicoradiologic outcomes of stand-alone posterior expandable cages for ASD with LSCS. Materials and Methods: Patients with persistent neurologic symptoms and radiologically confirmed ASD with LSCS were evaluated between January 2011 and December 2016. The five-year follow-up data were used to evaluate the long-term outcomes. The radiologic parameters for sagittal balance, pain control (visual analogue scale), disability (Oswestry Disability Index), and early (peri-operative) and late (implant) complications were evaluated. Results: The data of 19 patients with stand-alone posterior expandable cages were evaluated. Local factors, such as intervertebral and foraminal heights, were significantly corrected (p < 0.01 and p < 0.01, respectively), and revision was not reported. The pain level (p < 0.01) and disability rate (p < 0.01) significantly improved, and the early complication rate was low (n = 2, 10.52%). However, lumbar lordosis (p = 0.62) and sagittal balance (p = 0.80) did not significantly improve. Furthermore, the rates of subsidence (n = 4, 21.05%) and retropulsion (n = 3, 15.79%) were high. Conclusions: A stand-alone expandable cage technique should only be considered for older adults and patients with previous extensive fusion. Although this technique is less invasive, improves the local radiologic factors, and yields favorable clinical outcomes with low revision rates, it does not improve the sagittal balance. For more widespread application, the strength of the cage material and high subsidence rates should be improved.

5.8 GHz High-Efficiency RF-DC Converter Based on Common-Ground Multiple-Stack Structure.

This paper presents a 5.8 GHz RF-DC converter for high conversion efficiency and high output voltage based on a common-ground and multiple-stack structure. An RF isolation network (RFIN) for the multiple-stack RF-DC converter is proposed to combine the DC output voltage of each stack without separating its RF ground from the DC ground. The RFIN is designed using micro-strip transmission lines on a single-layer printed circuit board (PCB) with a common ground for the bottom plate. A 4-stack RF-DC converter based on a class-F voltage doubler for each stack was implemented to verify the proposed RFIN for the multiple-stack and common-ground structure. The performances of the implemented 4-stack RF-DC converter were evaluated in comparison to the single-stack converter that was also implemented. The size of the implemented 4-stack RF-DC converter using bare-chip Schottky diodes is 24 mm × 123 mm on a single-layer PCB. For an input power of 21 dBm for each stack of the RF-DC converter with a load resistance of 4 kΩ, a high efficiency of 73.1% and a high DC output voltage of 34.2 V were obtained.

Vertical ZnO Nanotube Transistor on a Graphene Film for Flexible Inorganic Electronics.

The bottom-up integration of a 1D-2D hybrid semiconductor nanostructure into a vertical field-effect transistor (VFET) for use in flexible inorganic electronics is reported. Zinc oxide (ZnO) nanotubes on graphene film is used as an example. The VFET is fabricated by growing position- and dimension-controlled single crystal ZnO nanotubes vertically on a large graphene film. The graphene film, which acts as the substrate, provides a bottom electrical contact to the nanotubes. Due to the high quality of the single crystal ZnO nanotubes and the unique 1D device structure, the fabricated VFET exhibits excellent electrical characteristics. For example, it has a small subthreshold swing of 110 mV dec-1 , a high Imax /Imin ratio of 106 , and a transconductance of 170 nS µm-1 . The electrical characteristics of the nanotube VFETs are validated using 3D transport simulations. Furthermore, the nanotube VFETs fabricated on graphene films can be easily transferred onto flexible plastic substrates. The resulting components are reliable, exhibit high performance, and do not degrade significantly during testing.

Searching for consensus in the approach to patients with chronic lateral ankle instability: ask the expert.

PURPOSE: The purpose of this study is to propose recommendations for the treatment of patients with chronic lateral ankle instability (CAI) based on expert opinions. METHODS: A questionnaire was sent to 32 orthopaedic surgeons with clinical and scientific experience in the treatment of CAI. The questions were related to preoperative imaging, indications and timing of surgery, technical choices, and the influence of patient-related aspects. RESULTS: Thirty of the 32 invited surgeons (94%) responded. Consensus was found on several aspects of treatment. Preoperative MRI was routinely recommended. Surgery was considered in patients with functional ankle instability after 3-6 months of non-surgical treatment. Ligament repair is still the treatment of choice in patients with mechanical instability; however, in patients with generalized laxity or poor ligament quality, lateral ligament reconstruction (with grafting) of both the ATFL and CFL should be considered. CONCLUSIONS: Most surgeons request an MRI during the preoperative planning. There is a trend towards earlier surgical treatment (after failure of non-surgical treatment) in patients with mechanical ligament laxity (compared with functional instability) and in high-level athletes. This study proposes an assessment and a treatment algorithm that may be used as a recommendation in the treatment of patients with CAI. LEVEL OF EVIDENCE: V.

Anisotropic Liesegang pattern for the nonlinear elastic biomineral-hydrogel complex.

The Liesegang pattern is a beautiful natural anisotropic patterning phenomenon observed in rocks and sandstones. This study reveals that the Liesegang pattern can induce nonlinear elasticity. Here, a Liesegang-patterned complex with biomineral-hydrogel repetitive layers is prepared. This Liesegang-patterned complex is obtained only when the biomineralization is performed under the supersaturated conditions. The Liesegang-patterned complex features a nonlinear elastic response, whereas a complex with a single biomineral shell shows a linear behavior, thus demonstrating that the Liesegang pattern is essential in achieving nonlinear elasticity. The stiff biomineral layers have buffered the concentrated energy on behalf of soft hydrogels, thereby exposing the hydrogel components to reduced stress and, in turn, enabling them to perform the elasticity continuously. Moreover, the nonlinear elastic Liesegang-patterned complex exhibits excellent stress relaxation to the external loading, which is the biomechanical characteristic of cartilage. This stress relaxation allows the bundle of fiber-type Liesegang-patterned complex to endure greater deformation.

Cultured meat with enriched organoleptic properties by regulating cell differentiation.

Research on cultured meat has primarily focused on the mass proliferation or differentiation of muscle cells; thus, the food characteristics of cultured meat remain relatively underexplored. As the quality of meat is determined by its organoleptic properties, cultured meat with similar sensory characteristics to animal-derived meat is highly desirable. In this study, we control the organoleptic and nutritional properties of cultured meat by tailoring the 2D differentiation of primary bovine myoblasts and primary bovine adipose-derived mesenchymal stem cells on gelatin/alginate scaffolds with varying stiffness. We assess the effect of muscle and adipose differentiation quality on the sensory properties of cultured meat. Thereafter, we fabricate cultured meat with similar sensory profiles to that of conventional beef by assembling the muscle and adipose constructs composed of highly differentiated cells. We introduce a strategy to produce cultured meat with enriched food characteristics by regulating cell differentiation with scaffold engineering.

Prosthetic rehabilitation of a patient with unilateral dislocated condyle fracture after treatment with a mandibular repositioning splint: a clinical report.

This clinical report describes the use of a mandibular repositioning splint and the subsequent prosthodontic treatment of a unilateral dislocated condyle fracture for a patient whose injury resulted in significant mandibular deviation and malocclusion. The use of a mandibular repositioning splint considerably reduced the mandibular deviation, and a stable mandibular position was maintained with the definitive prosthesis.

Unravelling Disorder Effects on Thermoelectric Properties of Semicrystalline Polymers in a Wide Range of Doping Levels.

Thermoelectric (TE) performance of a specific semicrystalline polymer is studied experimentally only in a limited range of doping levels with molecular doping methods. The doping level is finely controlled via in situ electrochemical doping in a wide range of carrier concentrations with an electrolyte ([PMIM]+ [TFSI]- )-gated organic electrochemical transistor system. Then, the charge generation/transport and TE properties of four p-type semicrystalline polymers are analyzed and their dynamic changes of crystalline morphologies and local density of states (DOS) during electrochemical doping are compared. These polymers are synthesized based on poly[(2,5-bis(2-alkyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophene-2-yl)benzo[c][1,2,5]thiadiazole)] by varying side chains: With oligoethylene glycol (OEG) substituents, facile p-doping is achieved because of easy penetration of TFSI- ions into the polymer matrix. However, the charge transport is hindered with longer OEG chains length because of the enhanced insulation. Therefore, with the shortest OEG substituents the electrical conductivity (30.1 S cm-1 ) and power factor (2.88 µW m-1 K-2 ) are optimized. It is observed that all polymers exhibit p- to n-type transition in Seebeck coefficients in heavily doped states, which can be achieved by electrochemical doping. These TE behaviors are interpreted based on the relation between the localized DOS band structure and molecular packing structure during electrochemical doping.

Zwitterionic Inhaler with Synergistic Therapeutics for Reprogramming of M2 Macrophage to Pro-Inflammatory Phenotype.

Myriad lung diseases are life threatening and macrophages play a key role in both physiological and pathological processes. Macrophages have each pro-/anti-inflammatory phenotype, and each lung disease can be aggravated by over-polarized macrophage. Therefore, development of a method capable of mediating the macrophage phenotype is one of the solutions for lung disease treatment. For mediating the phenotype of macrophages, the pulmonary delivery system (PDS) is widely used due to its advantages, such as high efficiency and accessibility of the lungs. However, it has a low drug delivery efficiency ironically because of the perfect lung defense system consisting of the mucus layer and airway macrophages. In this study, zwitterion-functionalized poly(lactide-co-glycolide) (PLGA) inhalable microparticles (ZwPG) are synthesized to increase the efficiency of the PDS. The thin layer of zwitterions formed on PLGA surface has high nebulizing stability and show high anti-mucus adhesion and evasion of macrophages. As a reprogramming agent for macrophages, ZwPG containing dexamethasone (Dex) and pirfenidone (Pir) are treated to over-polarized M2 macrophages. As a result, a synergistic effect of Dex/Pir induces reprogramming of M2 macrophage to pro-inflammatory phenotypes.

Whole-genome sequencing of 20 cholangiocarcinoma cases reveals unique profiles in patients with cirrhosis and primary sclerosing cholangitis.

Background: Cholangiocarcinoma (CCA) is a molecularly heterogenous disease that is often fatal. Whole genome sequencing (WGS) can provide additional knowledge of mutational spectra compared with panel sequencing. We describe the molecular landscape of CCA using whole-genome sequencing and compare the mutational landscape between short-term and long-term survivors. Methods: We explored molecular differences between short-term and long-term survivors by performing WGS on 20 patient samples from our biliary tract cancer database. Short-term survivors were enriched for cases with underlying primary sclerosing cholangitis (PSC) and patients with cirrhosis. All samples underwent tumour epithelial enrichment using laser capture microdissection (LCM). Results: Dominant single base substitution (SBS) signatures across the cohort included SBS1 and SBS5, with the latter more prevalent in long-term survivors. SBS17 was evident in 3 cases, all of whom had underlying ulcerative colitis (UC) with PSC. Additional rare signatures included SBS3 in a patient treated for prior mantle cell lymphoma and SBS26/SBS6 in a patient with a tumor mutational burden of 33 mutations/Mb and a pathogenic MLH1 germline mutation. Somatic TP53 inactivating mutations were present in 8/10 (80%) short-term survivors and in none of the long-term survivors. Additional mutations occurred in KRAS, SMAD4, CDKN2A, and chromatin remodelling genes. The long-term survivor group harboured predicted fusions in FGFR (n=2) and pathogenic mutations in BRAF and IDH1 (n=2). Conclusions: TP53 alterations are associated with poor outcomes in patients with CCA. Patients with underlying inflammatory/autoimmune conditions may be enriched for unique tumour mutational signatures.

Occlusive membranes for guided regeneration of inflamed tissue defects.

Guided bone regeneration aided by the application of occlusive membranes is a promising therapy for diverse inflammatory periodontal diseases. Symbiosis, homeostasis between the host microbiome and cells, occurs in the oral environment under normal, but not pathologic, conditions. Here, we develop a symbiotically integrating occlusive membrane by mimicking the tooth enamel growth or multiple nucleation biomineralization processes. We perform human saliva and in vivo canine experiments to confirm that the symbiotically integrating occlusive membrane induces a symbiotic healing environment. Moreover, we show that the membrane exhibits tractability and enzymatic stability, maintaining the healing space during the entire guided bone regeneration therapy period. We apply the symbiotically integrating occlusive membrane to treat inflammatory-challenged cases in vivo, namely, the open and closed healing of canine premolars with severe periodontitis. We find that the membrane promotes symbiosis, prevents negative inflammatory responses, and improves cellular integration. Finally, we show that guided bone regeneration therapy with the symbiotically integrating occlusive membrane achieves fast healing of gingival soft tissue and alveolar bone.

Characterization of transparent conductive ITO, ITiO, and FTO films for application in photoelectrochemical cells.

Transparent conductive In(2-x)Sn(x)O3 (ITO) and In(2-x)Ti(x)O3 (ITiO) films were prepared via RF magnetron sputtering on soda-lime glass substrates at 300 degrees C and investigated with respect to their photoelectric conversion performance compared with the commercial F:SnO2 (FTO) glass. The near infrared ray transmittance of ITiO was highest for wavelengths over 1000 nm compared with those of ITO and FTO. Photoelectrochemical cells (PECs) were fabricated using ITiO film, ITO film, and FTO glass. The photoelectric conversion efficiency (eta) of the PECs samples using ITiO was 5.64%, whereas 2.73% was obtained from the PEC samples with ITO, both at 100 mW/cm2 light intensity. The impedance measurement was also used to explain the electrochemical performance of the PECs with various TCO glasses.

Tailoring a Gelatin/Agar Matrix for the Synergistic Effect with Cells to Produce High-Quality Cultured Meat.

Edible scaffolds are needed in cultured meat to mimic meat's three-dimensional structure by organizing cells and replenishing the insufficient meat mass of cells alone. However, there is still a large gap between slaughtered meat and cells developed into tissues using scaffolds. This is mainly due to the difference in size, texture, flavor, and taste. In this study, we develop a coating matrix to modify the surface of textured vegetable protein (TVP), a vegetable cell support, to produce cultured meat having slaughtered meat's essential characteristics. We optimized the fish gelatin/agar matrix's microstructure by controlling the ratio of the two biopolymers, stably introducing a cell adhesive environment on the TVP. By coating the optimized gelatin/agar matrix on the TVP's surface using an easy and fast dipping method, hybrid cultured meat composed of animal cells and plant protein was produced. As the cells proliferated, their synergistic effect permitted the cultured meat's texture, flavor, and taste to reach a level comparable to that of slaughtered meat. The TVP-based cultured meat prepared with the present technology has been recreated as high-quality cultured meat by satisfying five challenging factors: cells, texture, cost, mass, and flavor.