Carbon Dots Derived from Non-Biomass Waste: Methods, Applications, and Future Perspectives.

Carbon dots (CDs) are luminescent carbon nanoparticles with significant potential in analytical sensing, biomedicine, and energy regeneration due to their remarkable optical, physical, biological, and catalytic properties. In light of the enduring ecological impact of non-biomass waste that persists in the environment, efforts have been made toward converting non-biomass waste, such as ash, waste plastics, textiles, and papers into CDs. This review introduces non-biomass waste carbon sources and classifies them in accordance with the 2022 Australian National Waste Report. The synthesis approaches, including pre-treatment methods, and the properties of the CDs derived from non-biomass waste are comprehensively discussed. Subsequently, we summarize the diverse applications of CDs from non-biomass waste in sensing, information encryption, LEDs, solar cells, and plant growth promotion. In the final section, we delve into the future challenges and perspectives of CDs derived from non-biomass waste, shedding light on the exciting possibilities in this emerging area of research.

Aerosol exchange between pressure-equilibrium rooms induced by door motion and human movement.

It is now widely recognised that aerosol transport is major vector for transmission of diseases such as COVID-19, and quantification of aerosol transport in the built environment is critical to risk analysis and management. Understanding the effects of door motion and human movement on the dispersion of virus-laden aerosols under pressure-equilibrium conditions is of great significance to the evaluation of infection risks and development of mitigation strategies. This study uses novel numerical simulation techniques to quantify the impact of these motions upon aerosol transport and provides valuable insights into the wake dynamics of swinging doors and human movement. The results show that the wake flow of an opening swinging door delays aerosol escape, while that of a person walking out entrains aerosol out of the room. Aerosol escape caused by door motion mainly happens during the closing sequence which pushes the aerosols out. Parametric studies show that while an increased door swinging speed or human movement speed can enhance air exchange across the doorway, the cumulative aerosol exchange across the doorway is not clearly affected by the speeds.

Carbon Dot Therapeutic Platforms: Administration, Distribution, Metabolism, Excretion, Toxicity, and Therapeutic Potential.

Ultrasmall nanoparticles are often grouped under the broad umbrella term of "nanoparticles" when reported in the literature. However, for biomedical applications, their small sizes give them intimate interactions with biological species and endow them with unique functional physiochemical properties. Carbon quantum dots (CQDs) are an emerging class of ultrasmall nanoparticles which have demonstrated considerable biocompatibility and have been employed as potent theragnostic platforms. These particles find application for increasing drug solubility and targeting, along with facilitating the passage of drugs across impermeable membranes (i.e., blood brain barrier). Further functionality can be triggered by various environmental conditions or external stimuli (i.e., pH, temperature, near Infrared (NIR) light, ultrasound), and their intrinsic fluorescence is valuable for diagnostic applications. The focus of this review is to shed light on the therapeutic potential of CQDs and identify how they travel through the body, reach their site of action, administer therapeutic effect, and are excreted. Investigation into their toxicity and compatibility with larger nanoparticle carriers is also examined. The future of CQDs for theragnostic applications is promising due to their multifunctional attributes and documented biocompatibility. As nanomaterial platforms become more commonplace in clinical treatments, the commercialization of CQD therapeutics is anticipated.

Remediation of groundwater contaminated with dye using carbon dots technology: Ecotoxicological and microbial community responses.

Groundwater pollution poses a serious threat to the main source of clean water globally. Nanoparticles have the potential for remediation of polluted aquifers; however, environmental safety concerns associated with in situ deployments of such technology include potential detrimental effects on microorganisms in terms of toxicity and functional disruptions. In this work, we evaluated a new and ecofriendly approach using carbon dots (CDs) as Fenton-like catalysts to catalyse the degradation of dye-containing groundwater samples. This investigation aimed at evaluating the efficacy of a novel remediation technology in terms of dye degradation and toxicity reduction while assessing its impacts on aquatic microorganisms. Uncontaminated Australian groundwater samples were spiked with methylene blue and incubated in the dark, at 18 °C, under slow agitation, using CDs at 0.5 mg mL-1 and H2O2 at 73.5 mM for 25 h. The dye degradation rate was determined as well as the toxicity of the treated solutions using the Microtox® bioassay. Further, to determine the changes in the groundwater microbial community, 16 S rRNA sequencing was used and evenness and diversity indices were analysed using Pielou's evenness and Simpson index, respectively. This study revealed that dye-containing groundwater were effectively treated by CDs showing a degradation rate of 78-82% and a significant 4-fold reduction in the toxicity. Characterisation of the groundwater microbiota revealed a predominance of at least 60% Proteobacteria phylum in all samples where diversity and evenness were maintained throughout the remediation process. The results showed that CDs could be an efficient approach to treat polluted groundwater and potentially have minimum impact on the environmental microbiome.

Corrosion resistance of itaconic acid doped polyaniline /nanographene oxide composite coating.

Graphene oxide (GO) and polyaniline (PANI) are very unique materials with broad potential in corrosion protection coating. To achieve the maximum stability and anti-corrosion effect in a polar medium, firstly itaconic acid doped PANI (DP) was readily prepared by a one-step method, followed by forming a GO and DP composite (GODP). Characterization by Fourier transform infrared spectroscopy and ultraviolet-visible absorption spectra provides evidence for the successful doping of itaconic acid in PANI. X-ray diffraction analysis shows that the d-spacing of the GO sheets increases slightly with the intercalation of DP. The morphological studies show disordered structures in GODP compared with the original GO sheets due to the introduction of PANI molecules and the interaction of functional groups on the surface of the GO sheets. Thermogravimetric analysis reveals the good thermal stability of DP and GODP. Quantum calculation further confirms the successful doping of itaconic acid, and the effective complex of GO and DP, providing a quantitative understanding of the curing mechanism. The crosslinking interaction among the GODP, curing agent, and epoxy resin facilitates the formation of a compact coating, leading to excellent corrosion resistance toward Mg alloy.

Quantum dot (QD)-based probes for multiplexed determination of heavy metal ions.

Heavy metal contamination is a major global concern and additive toxicity resulting from the exposure to multiple heavy metal ions is more pronounced than that induced by a single metal species. Quantum dots (QDs) have demonstrated unique properties as sensing materials for heavy metal ions over the past two decades. With the rapid development and deep understanding on determination of single heavy metal ion using QD probes, this technology has been employed for sensing multiple metal ions. This review (with 97 refs.) summarizes the progress made in recent years in methods for multiplexed determination of heavy metal ions using QDs. Following an introduction into the importance of simultaneous quantitation of multiple heavy metal ions in environmentally relevant settings, the review discusses the applications of different types of QDs, i.e. chalcogenide, carbon, polymer and graphene in this field. Determination strategies based on fluorometric, colorimetric and electrochemical responses were reviewed including the testing mechanisms and differentiation between various metal ions. In addition, current state of the art sensor constructions, i.e. immobilization of QDs on solid substrate and sensor arrays have been highlighted. A concluding section describes the limitations, opportunities and future challenges of the QD probes. We also compiled a comprehensive table of currently available literature. The listed papers provided information in the following categories, i.e. type of QDs used, ligands or other components in the probe, metal ions tested, medium/substrate of the probe, transduction methods, discrimination mechanism, limit of detection (LOD) and concentration range. Graphic abstract.

The Design and Synthesis of Fluorescent Coumarin Derivatives and Their Study for Cu2+ Sensing with an Application for Aqueous Soil Extracts.

A series of fluorescent coumarin derivatives 2a-e were systematically designed, synthesized and studied for their Cu2+ sensing performance in aqueous media. The sensitivities and selectivities of the on-to-off fluorescent Cu2+ sensing signal were in direct correlation with the relative arrangements of the heteroatoms within the coordinating moieties of these coumarins. Probes 2b and 2d exhibited Cu2+ concentration dependent and selective fluorescence quenching, with linear ranges of 0-80 µM and 0-10 µM, and limits of detection of 0.14 µM and 0.38 µM, respectively. Structural changes of 2b upon Cu2+ coordination were followed by fluorescence titration, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), mass spectrometry, and single crystal X-ray diffraction on the isolated Cu2+-coumarin complex. The results revealed a 1:1 stoichiometry between 2b and Cu2+, and that the essential structural features for Cu2+-selective coordination are the coumarin C=O and a three-bond distance between the amide NH and heterocyclic N. Probe 2b was also used to determine copper (II) levels in aqueous soil extracts, with recovery rates over 80% when compared to the standard soil analysis method: inductively coupled plasma-mass spectrometry (ICP-MS).

Effect of Pseudomonas fluorescens on Buried Steel Pipeline Corrosion.

Buried steel infrastructure can be a source of iron ions for bacterial species, leading to microbiologically influenced corrosion (MIC). Localized corrosion of pipelines due to MIC is one of the key failure mechanisms of buried steel pipelines. In order to better understand the mechanisms of localized corrosion in soil, semisolid agar has been developed as an analogue for soil. Here, Pseudomonas fluorescens has been introduced to the system to understand how bacteria interact with steel. Through electrochemical testing including open circuit potentials, potentiodynamic scans, anodic potential holds, and electrochemical impedance spectroscopy it has been shown that P. fluorescens increases the rate of corrosion. Time for oxide and biofilms to develop was shown to not impact on the rate of corrosion but did alter the consistency of biofilm present and the viability of P. fluorescens following electrochemical testing. The proposed mechanism for increased corrosion rates of carbon steel involves the interactions of pyoverdine with the steel, preventing the formation of a cohesive passive layer, after initial cell attachment, followed by the formation of a metal concentration gradient on the steel surface.

Selective thermal transformation of old computer printed circuit boards to Cu-Sn based alloy.

This study investigates, verifies and determines the optimal parameters for the selective thermal transformation of problematic electronic waste (e-waste) to produce value-added copper-tin (Cu-Sn) based alloys; thereby demonstrating a novel new pathway for the cost-effective recovery of resources from one of the world's fastest growing and most challenging waste streams. Using outdated computer printed circuit boards (PCBs), a ubiquitous component of e-waste, we investigated transformations across a range of temperatures and time frames. Results indicate a two-step heat treatment process, using a low temperature step followed by a high temperature step, can be used to produce and separate off, first, a lead (Pb) based alloy and, subsequently, a Cu-Sn based alloy. We also found a single-step heat treatment process at a moderate temperature of 900 °C can be used to directly transform old PCBs to produce a Cu-Sn based alloy, while capturing the Pb and antimony (Sb) as alloying elements to prevent the emission of these low melting point elements. These results demonstrate old computer PCBs, large volumes of which are already within global waste stockpiles, can be considered a potential source of value-added metal alloys, opening up a new opportunity for utilizing e-waste to produce metal alloys in local micro-factories.

The effect of fluorophore incorporation on fluorescence enhancement in colloidal photonic crystals.

The significant effect of photonic crystals (PhCs) on fluorophore emission has recently received intense interest. However, so far little attention has been paid on the influence of the fluorophore incorporation method on the performance of PhCs, particularly in practical applications. In this study, rhodamine B is immobilised on polystyrene spheres using a diffusion-swelling method, which are self-assembled into three-dimensional colloidal photonic crystal films. This immobilization method has resulted in 230-fold fluorescence enhancement compared to control films, the greatest fluorescence enhancement of RhB immobilised on monolithic colloidal photonic crystals compared to other immobilization methods such as infiltration and electrostatic charge-facilitated dye attachment on the particle surface. We further demonstrate the stability of dye attachment and the relationship between fluorescence intensity enhancement and the pseudo bandgap position relative to a fluorophore fluorescence peak.

Tunable photoluminescence across the entire visible spectrum from carbon dots excited by white light.

Although reports have shown shifts in carbon dot emission wavelengths resulting from varying the excitation wavelength, this excitation-dependent emission does not constitute true tuning, as the shifted peaks have much weaker intensity than their dominant emission, and this is often undesired in real world applications. We report for the first time the synthesis and photoluminescence properties of carbon dots whose peak fluorescence emission wavelengths are tunable across the entire visible spectrum by simple adjustment of the reagents and synthesis conditions, and these carbon dots are excited by white light. Detailed material characterization has revealed that this tunable emission results from changes in the carbon dots' chemical composition, dictated by dehydrogenation reactions occurring during carbonization. These significantly alter the nucleation and growth process, resulting in dots with either more oxygen-containing or nitrogen-containing groups that ultimately determine their photoluminescence properties, which is in stark contrast to previous observations of carbon dot excitation-dependent fluorescence. This new ability to synthesize broadband excitable carbon dots with tunable peak emissions opens up many new possibilities, particularly in multimodal sensing, in which multiple analytes and processes could be monitored simultaneously by associating a particular carbon dot emission wavelength to a specific chemical process without the need for tuning the excitation source.

Structure and Dynamics of Aqueous 2-Aminothiazole/NaCl Electrolytes at Electrified Interfaces.

A computational study was performed to investigate the dynamics of aqueous electrolytes containing organic corrosion inhibitors near electrified interfaces by using the constant-charge model in classical molecular dynamics simulations. The results showed that when inhibitors form films at the interface, the surface charge of the electrode causes displacement of the molecules, referred to as electroporation. The hydrophobicity of the inhibitor molecules affects both the stability of the films and their recovery time. This study highlights the value of computational investigations of the dynamics within inhibitor films as a complementary approach to the traditional focus on inhibitor-substrate interactions, leading to deeper insights into the mechanisms of corrosion inhibition mechanisms.

Bio-corrosion in concrete sewer systems: Mechanisms and mitigation strategies.

The deterioration of concrete sewer structures due to bio-corrosion presents critical and escalating challenges from structural, economic and environmental perspectives. Despite decades of research, this issue remains inadequately addressed, resulting in billions of dollars in maintenance costs and a shortened service life for sewer infrastructure worldwide. This challenge is exacerbated by the absence of standardized test methods and universally accepted mitigation strategies, leaving industries and stakeholders confronting an increasingly pressing problem. This paper aims to bridge this knowledge gap by providing a comprehensive review of the complex mechanisms of bio-corrosion, focusing on the formation and accumulation of hydrogen sulfide, its conversion into sulfuric acid and the subsequent deterioration of concrete materials. The paper also explores various factors affecting bio-corrosion rates, including environmental conditions, concrete properties and wastewater characteristics. The paper further highlights existing corrosion test strategies, such as chemical tests, in-situ tests and microbial simulations tests along with their general analytical parameters. The conversion of hydrogen sulfide into sulfuric acid is a primary cause of concrete decay and its progression is influenced by environmental conditions, inherent concrete characteristics, and the composition of wastewater. Through illustrative case studies, the paper assesses the practical implications and efficacy of prevailing mitigation techniques. Coating materials provide a protective barrier against corrosive agents among the discussed techniques, while optimised concrete mix designs enhance the inherent resistance and durability of the concrete matrix. Finally, this review also outlines the future prospects and challenges in bio-corrosion research with an aim to promote the creation of more resilient and cost-efficient materials for sewer systems.

Fast and Effective Removal of Congo Red by Doped ZnO Nanoparticles.

ZnO nanoparticles (NPs) show remarkable efficiency in removing various contaminants from aqueous systems. Doping ZnO NPs with a second metal element can dramatically change the physicochemical properties of the pristine nanoparticles. However, there have been limited reports on the absorption of doped ZnO NPs, especially comparing the performance of ZnO NPs with different doping elements. Herein, ZnO NPs were doped with three transitional metals (Co, Fe, and Mn) at a nominal 2 wt.%. The particle surface had a higher dopant concentration than the interior for all NPs, implying the migration of the dopants to the surface. Because doping atoms inhibited grain growth, the doped ZnO NPs had a small particle size and a large surface area. The adsorption performance followed the order of Fe-doped < undoped < Mn-doped < Co-doped ZnO. Co-doped ZnO had an increased surface area and less tendency to agglomerate in an aqueous solution, showing the best adsorption performance. The adsorption of Congo red (CR) on Co-doped ZnO followed the pseudo-second-order model and the Langmuir isotherm. The adsorption process was spontaneous through monolayer chemisorption, and the maximum adsorption capacity was 230 mg/g. Finally, the Co-doped ZnO was successfully incorporated into an alginate membrane by electrospinning. The membrane demonstrated excellent adsorption performance and had great potential as an innovative and low-cost adsorbent (inexpensive raw materials and simple processing) for wastewater purification.

Rapid and selective screening of organic peroxide explosives using acid-hydrolysis induced chemiluminescence.

Organic peroxide explosives (OPEs) are unstable, non-military, contemporary security threats often found in improvised explosive devices. Chemiluminescence (CL) can be used to detect OPEs, via radical formation consisting of peroxide moieties (-O-O-) under acidic conditions. However, selectivity for specific OPEs is hampered by the ubiquitous background of H2O2. Herein, we report the differentiation of hexamethylene triperoxide diamine (HMTD), triacetone triperoxide (TATP), and methyl ethyl ketone peroxide (MEKP) by specific flow injection analysis-CL (FIA-CL) signal profiles, after H2SO4 treatment. The radical degradation pathway of each structure, and its corresponding FIA-CL profile, was explored using mass spectrometry to reveal the rapid loss of -O-O- from TATP and HMTD structures, while MEKP formed CL signal-sustaining oligomers, as opposed to the immediate attenuation of H2O2. The CL response for OPEs in an aqueous media, measured via the described FIA-CL method, enabled ultra-trace limits of detection down to 0.40 µM for MEKP, 0.43 µM for HMTD, and 0.40 µM for TATP (combined linear range 1-83 µM with 95% confidence limit, n = 12). Expanded uncertainties of measurement (UM) of MEKP = ±0.98, HMTD = ±1.03, and TATP = ±1.1 (UM included probabilities of false positive and false negative as well as standard deviations of % recoveries and limit of detections of OPEs). Direct aqueous sample introduction via FIA-CL thus offers the prospect of rapid and selective screening of OPEs in security-heightened settings (e.g., airports), averting false positives from more ubiquitous H2O2.

Advanced flexible transvaginal mesh with high visibility under computerized tomography (CT) scan.

Pelvic floor disorders, including pelvic organ prolapse (POP) and stress urinary incontinence (SUI), are serious and very common. Surgery is commonly undertaken to restore the strength of the vaginal wall using transvaginal surgical mesh (TVM). However, up to 15% of TVM implants result in long-term complications, including pain, recurrent symptoms, and infection.Clinical Relevance- In this study, a new bioengineered TVM has been developed to address these issues. The TVM is visible using noninvasive imaging techniques such as computed tomography (CT); it has a highly similar structural profile to human tissue and potential to reduce pain and inflammation. These combined technological advances have the potential to revolutionize women's health.

A Green Synthesis Route to Derive Carbon Quantum Dots for Bioimaging Cancer Cells.

Carbon quantum dots (CQDs) are known for their biocompatibility and versatile applications in the biomedical sector. These CQDs retain high solubility, robust chemical inertness, facile modification, and good resistance to photobleaching, which makes them ideal for cell bioimaging. Many fabrication processes produce CQDs, but most require expensive equipment, toxic chemicals, and a long processing time. This study developed a facile and rapid toasting method to prepare CQDs using various slices of bread as precursors without any additional chemicals. This fast and cost-effective toasting method could produce CQDs within 2 h, compared with the 10 h process in the commonly used hydrothermal method. The CQDs derived from the toasting method could be used to bioimage two types of colon cancer cells, namely, CT-26 and HT-29, derived from mice and humans, respectively. Significantly, these CQDs from the rapid toasting method produced equally bright images as CQDs derived from the hydrothermal method.

Quorum sensing inhibitors applications: A new prospect for mitigation of microbiologically influenced corrosion.

Quorum sensing (QS) is a process of bacterial communication that involves the use of biochemical signals and adjusts the expression of specific genes as a response to the bacterial cell density within an environment. This process is employed by both Gram-positive and Gram-negative bacteria to regulate different physiological functions. In both cases, QS involves production, detection and responses to signalling chemicals, termed auto-inducers. Expression of virulence factors and formation of biofilms are the typical processes controlled by QS, which, therefore, inspires the exploration of QS as a plausible solution to mitigating the increasing microbial resistance to antibiotics. QS inhibitors (QSIs) from different origins have been recognised as a promising solution to biofilm related challenges in a large variety of applications. Though QSIs have demonstrated some strength in tackling biofouling, a key focus in the literature on QSIs based strategies has been to control microbially influenced corrosion. This article reviews the principles of QS, its mechanistic roles in biofilm formation and the feasibility of QSIs to mitigate biofilm related challenges in a number of commercial applications. The potential of QSIs in microbially influenced corrosion for future applications is also discussed.

Hazard profiling of a combinatorial library of zinc oxide nanoparticles: Ameliorating light and dark toxicity through surface passivation.

Zinc oxide (ZnO) is one of the high-volume production nanoparticles (NPs) currently used in a wide range of consumer and industrial goods. The inevitable seepage into environmental matrices and the photoactive nature of ZnO NPs warrants hazard profiling under environmentally related conditions. In this paper, the influence of simulated solar light (SSL) on dissolution behaviour and phototoxicity of ZnO NPs was studied using a combinatorial library of ZnO NPs with different sizes, surface coatings, dopant chemistry, and aspect ratios in a fish cell line (BF2) and zebrafish embryos. Generally, the cytotoxicity and embryo mortality increased when exposed concomitantly to SSL and ZnO NPs. The increase in toxic potential of ZnO NPs during SSL exposure concurred with release of Zn ions and ROS generation. Surface modification of NPs with poly(methacrylic acid) (PMAA), silica or serum coating decreased toxicity and ZnO with serum coating was the only NP that had no significant effect on any of the cytotoxicity parameters when tested under both dark and SSL conditions. Results from our study show that exposure to light could increase the toxic potential of ZnO NPs to environmental lifeforms and mitigation of ZnO NP toxicity is possible through modifying the surface chemistry.

A spatiotemporally resolved infection risk model for airborne transmission of COVID-19 variants in indoor spaces.

The classic Wells-Riley model is widely used for estimation of the transmission risk of airborne pathogens in indoor spaces. However, the predictive capability of this zero-dimensional model is limited as it does not resolve the highly heterogeneous spatiotemporal distribution of airborne pathogens, and the infection risk is poorly quantified for many pathogens. In this study we address these shortcomings by developing a novel spatiotemporally resolved Wells-Riley model for prediction of the transmission risk of different COVID-19 variants in indoor environments. This modelling framework properly accounts for airborne infection risk by incorporating the latest clinical data regarding viral shedding by COVID-19 patients and SARS-CoV-2 infecting human cells. The spatiotemporal distribution of airborne pathogens is determined via computational fluid dynamics (CFD) simulations of airflow and aerosol transport, leading to an integrated model of infection risk associated with the exposure to SARS-CoV-2, which can produce quantitative 3D infection risk map for a specific SARS-CoV-2 variant in a given indoor space. Application of this model to airborne COVID-19 transmission within a hospital ward demonstrates the impact of different virus variants and respiratory PPE upon transmission risk. With the emergence of highly contagious SARS-CoV-2 variants such as the Delta and Omicron strains, respiratory PPE alone may not provide effective protection. These findings suggest a combination of optimal ventilation and respiratory PPE must be developed to effectively control the transmission of COVID-19 in healthcare settings and indoor spaces in general. This generalised risk estimation framework has the flexibility to incorporate further clinical data as such becomes available, and can be readily applied to consider a wide range of factors that impact transmission risk, including location and movement of infectious persons, virus variant and stage of infection, level of PPE and vaccination of infectious and susceptible individuals, impacts of coughing, sneezing, talking and breathing, and natural and mechanised ventilation and filtration.