Catalyst Supraparticles: Tuning the Structure of Spray-Dried Pt/SiO2 Supraparticles via Salt-Based Colloidal Manipulation to Control their Catalytic Performance.

The structure of supraparticles (SPs) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet-assisted forced assembly approach is used, e.g., spray-drying, the achievable structure is limited by the inherent drying phenomena of the method. In particular, mixed NP dispersions of differently sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt-based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray-dried Pt/SiO2 SPs. By this, size-dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4-nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material-independent, and universally applicable approach to deliberately customize the structure and functionality of multi-component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet-assisted forced assembly approaches like spray-drying.

Chemically Reversible CO2 Uptake by Dendrimer-Impregnated Metal-Organic Frameworks.

Industrialization over the past two centuries has resulted in a continuous rise in global CO2 emissions. These emissions are changing ecosystems and livelihoods. Therefore, methods are needed to capture these emissions from point sources and possibly from our atmosphere. Though the amount of CO2 is rising, it is challenging to capture directly from air because its concentration in air is extremely low, 0.04%. In this study, amines installed inside metal-organic frameworks (MOFs) are investigated for the adsorption of CO2, including at low concentrations. The amines used are polyamidoamine dendrimers that contain many primary amines. Chemically reversible adsorption of CO2 via carbamate formation was observed, as was enhanced uptake of carbon dioxide, likely via dendrimer-amide-based physisorption. Limiting factors in this initial study are comparatively low dendrimer loadings and slow kinetics for carbon dioxide uptake and release, even at 80 °C.

Assessment of Hydrophilicity/Hydrophobicity in Mesoporous Silica by Combining Adsorption, Liquid Intrusion, and Solid-State NMR Spectroscopy.

We have developed a comprehensive strategy for quantitatively assessing the hydrophilicity/hydrophobicity of nanoporous materials by combining advanced adsorption studies, novel liquid intrusion techniques, and solid-state NMR spectroscopy. For this, we have chosen a well-defined system of model materials, i.e., the highly ordered mesoporous silica molecular sieve SBA-15 in its pristine state and functionalized with different amounts of trimethylsilyl (TMS) groups, allowing one to accurately tailor the surface chemistry while maintaining the well-defined pore structure. For an absolute quantification of the trimethylsilyl group density, quantitative 1H solid-state NMR spectroscopy under magic angle spinning was employed. A full textural characterization of the materials was obtained by high-resolution argon 87 K adsorption, coupled with the application of dedicated methods based on nonlocal-density functional theory (NLDFT). Based on the known texture of the model materials, we developed a novel methodology allowing one to determine the effective contact angle of water adsorbed on the pore surfaces from complete wetting to nonwetting, constituting a powerful parameter for the characterization of the surface chemistry inside porous materials. The surface chemistry was found to vary from hydrophilic to hydrophobic as the TMS functionalization content was increased. For wetting and partially wetting surfaces, pore condensation of water is observed at pressures P smaller than the bulk saturation pressure p0 (i.e., at p/p0 < 1) and the effective contact angle of water on the pore walls could be derived from the water sorption isotherms. However, for nonwetting surfaces, pore condensation occurs at pressures above the saturation pressure (i.e., at p/p0 > 1). In this case, we investigated the pore filling of water (i.e., the vapor-liquid phase transition) by the application of a novel, liquid water intrusion/extrusion methodology, allowing one to derive the effective contact angle of water on the pore walls even in the case of nonwetting. Complementary molecular simulations provide density profiles of water on pristine and TMS-grafted silica surfaces (mimicking the tailored, functionalized experimental silica surfaces), which allow for a molecular view on the water adsorbate structure. Summarizing, we present a comprehensive and reliable methodology for quantitatively assessing the hydrophilicity/hydrophobicity of siliceous nanoporous materials, which has the potential to optimize applications in heterogeneous catalysis and separation (e.g., chromatography).

Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity.

We are currently witnessing the dawn of hydrogen (H2) economy, where H2 will soon become a primary fuel for heating, transportation, and long-distance and long-term energy storage. Among diverse possibilities, H2 can be stored as a pressurized gas, a cryogenic liquid, or a solid fuel via adsorption onto porous materials. Metal-organic frameworks (MOFs) have emerged as adsorbent materials with the highest theoretical H2 storage densities on both a volumetric and gravimetric basis. However, a critical bottleneck for the use of H2 as a transportation fuel has been the lack of densification methods capable of shaping MOFs into practical formulations while maintaining their adsorptive performance. Here, we report a high-throughput screening and deep analysis of a database of MOFs to find optimal materials, followed by the synthesis, characterization, and performance evaluation of an optimal monolithic MOF (monoMOF) for H2 storage. After densification, this monoMOF stores 46 g L-1 H2 at 50 bar and 77 K and delivers 41 and 42 g L-1 H2 at operating pressures of 25 and 50 bar, respectively, when deployed in a combined temperature-pressure (25-50 bar/77 K → 5 bar/160 K) swing gas delivery system. This performance represents up to an 80% reduction in the operating pressure requirements for delivering H2 gas when compared with benchmark materials and an 83% reduction compared to compressed H2 gas. Our findings represent a substantial step forward in the application of high-density materials for volumetric H2 storage applications.

Quest for an Optimal Methane Hydrate Formation in the Pores of Hydrolytically Stable Metal-Organic Frameworks.

Porous metal-organic frameworks (MOFs) capable of storing a relatively high amount of dry methane (CH4) in the adsorbed phase are largely explored; however, solid CH4 storage in confined pores of MOFs in the form of hydrates is yet to be discovered. Here we report a rational approach to form CH4 hydrates by taking advantage of the optimal pore confinement in relatively narrow cavities of hydrolytically stable MOFs. Unprecedentedly, we were able to isolate methane hydrate (MH) nanocrystals with an sI structure encapsulated inside MOF pores with an optimal cavity dimension. It was found that confined nanocrystals require cavities slightly larger than the unit cell crystal size of MHs (1.2 nm), as exemplified in the experimental case study performed on Cr-soc-MOF-1 vs smaller cavities of Y-shp-MOF-5. Under these conditions, the excess amount of methane stored in the pores of Cr-soc-MOF-1 in the form of MH was found to be ≈50% larger than the corresponding dry adsorbed amount at 10 MPa. More importantly, the pressure gradient driving the CH4 storage/delivery process could be drastically reduced compared to the conventional CH4-adsorbed phase storage on the dry Cr-soc-MOF-1 (≤3 MPa vs 10 MPa).

Structural Deterioration of Well-Faceted MOFs upon H2S Exposure and Its Effect in the Adsorption Performance.

The structural deterioration of archetypical, well-faceted metal-organic frameworks (MOFs) has been evaluated upon exposure to an acidic environment (H2S). Experimental results show that the structural damage highly depends on the nature of the hybrid network (e.g., softness of the metal ions, hydrophilic properties, among others) and the crystallographic orientation of the exposed facets. Microscopy images show that HKUST-1 with well-defined octahedral (111) facets is completely deteriorated, ZIF-8 with preferentially exposed (110) facets exhibits a large external deterioration with the development of holes or cavities in the mesoporous range, whereas UiO-66-NH2 with (111) exposed facets, and PCN-250 with (100) facets does not reflect any sign of surface damage. Despite the selectivity in the external deterioration, X-ray diffraction and gas adsorption measurements confirm that indeed all MOFs suffer an important internal deterioration, these effects being more severe for MOFs based on softer cations (e.g., Cu-based HKUST-1 and Fe-based PCN-250). These structural changes have inevitable important effects in the final adsorption performance for CO2 and CH4 at low and high pressures.

Economic evaluation of endoscopic radiofrequency ablation for the treatment of dysplastic Barrett's esophagus in Spain.

BACKGROUND AND STUDY AIMS: To assess the cost-effectiveness of introducing endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection in selected patients into the standard of care of Barrett's esophagus patients with high-grade dysplasia or low-grade dysplasia in Spain. METHODS: The disease evolution was modeled via a semi-Markov model. The treatment strategies compared included endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection and the Standard of Care (esophagectomy or palliative chemoradiotherapy according to disease status for high-grade dysplasia and endoscopic surveillance for low-grade dysplasia). Efficacy rates, transition probabilities and utility values were obtained from the literature. Clinical management patterns and resource use were modeled according to Spanish clinical expert opinion. Costs were expressed in euros (€) from 2016 reflecting the Spanish National Health System perspective. Sensitivity analyses were performed to assess the robustness of the model. RESULTS: With respect to the Spanish Standard of Care, endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection was a dominant strategy for high-grade dysplasia patients. When a willingness-to-pay threshold of €30,000 per quality-adjusted life-years gained was considered, this was cost-effective for low-grade dysplasia patients (€12,865 per quality-adjusted life-years gained). The sensitivity analyses supported the base case analysis results and pointed towards the main drivers of uncertainty in the model. CONCLUSIONS: From a health care decision-maker, endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection is the intervention of choice for dysplasic Barrett's esophagus patients in Spain.

Mesoporous supraparticles with a tailored solid-liquid-gas interface for visual indication of H2 gas and NH3 vapours.

Dual-gasochromic supraparticles that undergo rapid eye-readable and gas-specific colour changes upon reaction with hydrogen or ammonia are reported. This functionality is achieved by tailoring the solid-liquid-gas interface within the mesoporous framework of supraparticles via spray-drying.

Rapid and efficient hydrogen clathrate hydrate formation in confined nanospace.

Clathrate hydrates are crystalline solids characterized by their ability to accommodate large quantities of guest molecules. Although CH4 and CO2 are the traditional guests found in natural systems, incorporating smaller molecules (e.g., H2) is challenging due to the need to apply higher pressures to stabilize the hydrogen-bonded network. Another critical limitation of hydrates is the slow nucleation and growth kinetics. Here, we show that specially designed activated carbon materials can surpass these obstacles by acting as nanoreactors promoting the nucleation and growth of H2 hydrates. The confinement effects in the inner cavities promote the massive growth of hydrogen hydrates at moderate temperatures, using pure water, with extremely fast kinetics and much lower pressures than the bulk system.

Carbon-GO Composites with Preferential Water versus Ethanol Uptake.

The elimination of small amounts of water from alcohols is by no means a trivial issue in many practical applications like, for instance, the dehumidification of biocombustibles. The use of carbonaceous materials as sorbents has been far less explored than that of other materials because their hydrophobic character has typically limited their water uptake. Herein, we designed a synthetic process based on the use of eutectic mixtures that allowed the homogeneous dispersion of graphene oxide (GO) in the liquid containing the carbon precursor, e.g., furfuryl alcohol. Thus, after polymerization and a subsequent carbonization process, we were able to obtain porous carbon-GO composites where the combination of pore diameter and surface hydrophilicity provided a remarkable capacity for water uptake but extremely low methanol and ethanol uptake along the entire range of relative pressures evaluated in this work. Both the neat water uptake and the uptake difference between water and either methanol or ethanol of our carbon-GO composites were similar or eventually better than the uptake previously reported for other materials, also exhibiting preferential water-to-alcohol adsorption, e.g., porous coordination polymers, metal-organic frameworks, polyoxometalates, and covalent two-dimensional nanosheets embedded in a polymer matrix. Moreover, water versus alcohol uptake was particularly remarkable at low partial pressures in our carbon-GO composites.

Identification of a cDNA from the arbuscular mycorrhizal fungus Glomus intraradices that is expressed during mycorrhizal symbiosis and up-regulated by N fertilization.

A cDNA library was constructed with RNA from Glomus intraradices-colonized lettuce roots and used for differential screening. This allowed the identification of a cDNA (Gi-1) that was expressed only in mycorrhizal roots and was of fungal origin. The function of the gene product is unknown, because Gi-1 contained a complete open reading frame that was predicted to encode a protein of 157 amino acids which only showed little homology with glutamine synthetase from Helicobacter pylori. The time-course analysis of gene expression during the fungal life cycle showed that Gi-1 was expressed only during the mycorrhizal symbiosis and was not detected in dormant or germinating spores of G. intraradices. P fertilization did not significantly change the pattern of Gi-1 expression compared with that in the unfertilized treatment, whereas N fertilization (alone or in combination with P) considerably enhanced the Gi-1 transcript accumulation. This increase in gene expression correlated with plant N status and growth under such conditions. The possible role of the Gi-1 gene product in intermediary N metabolism of arbuscular mycorrhizal symbiosis is further discussed.

Economic evaluation of endoscopic radiofrequency ablation for the treatment of dysplastic Barrett’s esophagus in Spain

Background and study aims: To assess the cost-effectiveness of introducing endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection in selected patients into the standard of care of Barrett’s esophagus patients with high-grade dysplasia or low-grade dysplasia in Spain. Methods: The disease evolution was modeled via a semi-Markov model. The treatment strategies compared included endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection and the Standard of Care (esophagectomy or palliative chemoradiotherapy according to disease status for high-grade dysplasia and endoscopic surveillance for low-grade dysplasia). Efficacy rates, transition probabilities and utility values were obtained from the literature. Clinical management patterns and resource use were modeled according to Spanish clinical expert opinion. Costs were expressed in euros (Euros) from 2016 reflecting the Spanish National Health System perspective. Sensitivity analyses were performed to assess the robustness of the model. Results: With respect to the Spanish Standard of Care, endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection was a dominant strategy for high-grade dysplasia patients. When a willingness-to-pay threshold of Euros30,000 per quality-adjusted lifeyears gained was considered, this was cost-effective for low-grade dysplasia patients (€12,865 per quality-adjusted life-years gained). The sensitivity analyses supported the base case analysis results and pointed towards the main drivers of uncertainty in the model. Conclusions: From a health care decision-maker, endoscopic treatment based on radiofrequency ablation plus endoscopic mucosal resection is the intervention of choice for dysplasic Barrett's esophagus patients in Spain (AU)

No disponible