Functional resilience of C57BL/6J mouse heart to dietary fat overload.

Molecular mechanisms underlying cardiac dysfunction and subsequent heart failure in diabetic cardiomyopathy are incompletely understood. Initially we intended to test the role of G protein-coupled receptor kinase 2 (GRK2), a potential mediator of cardiac dysfunction in diabetic cardiomyopathy, but found that control animals on HFD did not develop cardiomyopathy. Cardiac function was preserved in both wild-type and GRK2 knockout animals fed high-fat diet as indicated by preserved left ventricular ejection fraction (LVEF) although heart mass was increased. The absence of cardiac dysfunction led us to rigorously evaluate the utility of diet-induced obesity to model diabetic cardiomyopathy in mice. Using pure C57BL/6J animals and various diets formulated with different sources of fat-lard (32% saturated fat, 68% unsaturated fat) or hydrogenated coconut oil (95% saturated fat), we consistently observed left ventricular hypertrophy, preserved LVEF, and preserved contractility measured by invasive hemodynamics in animals fed high-fat diet. Gene expression patterns that characterize pathological hypertrophy were not induced, but a modest induction of various collagen isoforms and matrix metalloproteinases was observed in heart with high-fat diet feeding. PPARα-target genes that enhance lipid utilization such as Pdk4, CD36, AcadL, and Cpt1b were induced, but mitochondrial energetics was not impaired. These results suggest that although long-term fat feeding in mice induces cardiac hypertrophy and increases cardiac fatty acid metabolism, it may not be sufficient to activate pathological hypertrophic mechanisms that impair cardiac function or induce cardiac fibrosis. Thus, additional factors that are currently not understood may contribute to the cardiac abnormalities previously reported by many groups.NEW & NOTEWORTHY Dietary fat overload (DFO) is widely used to model diabetic cardiomyopathy but the utility of this model is controversial. We comprehensively characterized cardiac contractile and mitochondrial function in C57BL6/J mice fed with lard-based or saturated fat-enriched diets initiated at two ages. Despite cardiac hypertrophy, contractile and mitochondrial function is preserved, and molecular adaptations likely limit lipotoxicity. The resilience of these hearts to DFO underscores the need to develop robust alternative models of diabetic cardiomyopathy.

Empirical determination of explosive vapor transport efficiencies.

The transport efficiency of 2,4-dinitrotoluene (2,4-DNT), 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitro-1,3,5-triazinane (RDX) trace vapors through tubing materials that commonly constitute vapor handling infrastructures have been determined for a variety of tubing dimensions and sampling conditions. Using a programmable temperature vaporization inlet coupled with a gas chromatography mass spectrometer (PTV-GC-MS), the explosive vapors were quantified both with and without a length of tubing of a specific material in the sampling flow path. At vapor temperatures of 30 °C and 66 °C, minimal attenuations were observed for 2,4-DNT and TNT vapor concentrations when the tubing material was in-line with the sampling flow path, indicating that the transport is largely unaffected by interactions with the surface of the tubing materials. In contrast, RDX vapors showed large attenuations as a function of both sampling conditions and tubing materials/dimensions. For those experiments where attenuated RDX vapor transport was observed, the mass sequestered by interactions between the flowing vapor and the internal tubing surface was determined to be in the range of tens to hundreds of picograms. Of all the materials examined for RDX transport, fluorinated ethylene propylene (FEP) tubing resulted in the least amount of mass loss to surface interactions, with vapor transport efficiencies (VTEs) between 95-100%. However, for some materials, the combination of tubing dimensions and sampling conditions resulted in no RDX transport, even after sampling more than 250.0 L of vapor through the tubing.

Trace Explosives Vapor Generation and Quantitation at Parts per Quadrillion Concentrations.

The generation of trace 2,4,6-trinitrotoluene (TNT), cyclotrimethylenetrinitramine (RDX), and pentaerythritol tetranitrate (PETN) vapors using a pneumatically modulated liquid delivery system (PMLDS) coupled to a polytetrafluoroethylene (PTFE) total-consumption micronebulizer is presented. The vapor generator operates in a continuous manner with final vapor concentrations proportional to the explosive concentration in aqueous solution delivered through the nebulizer and the diluent air flow rate. For quantitation of concentrations in the parts per billionvolume (ppbv) to parts per trillionvolume (pptrv) range, Tenax-TA thermal desorption tubes were used for vapor collection with subsequent analysis on a thermal-desorption system programmable-temperature vaporization gas chromatograph (TDS-PTV-GC) with a µ-ECD detector. With 30 min sample times and an average sampling rate of 100 mL min(-1), vapor concentrations of 38 pptrv for TNT, 25 pptrv for RDX, and 26 pptrv for PETN were determined. For parts per quadrillionvolume (ppqv) vapor quantitation of TNT and RDX, an online PTV-GC system with a negative-ion chemical ionization mass spectrometer (methane reagent gas) was used for direct sampling and capture of the vapor on the PTV inlet. Vapor concentrations as low as 160 ppqv and 710 ppqv for TNT and RDX were quantified, respectively, with an instrument duty cycle as low as 4 min.

Catalytic activity and thermal stability of horseradish peroxidase encapsulated in self-assembled organic nanotubes.

Horseradish peroxidase (HRP) was encapsulated in self-assembled lithocholic acid (LCA) based organic nanotubes and its catalytic activity before and after thermal treatment was measured for comparison with free HRP. The apparent kcat (kcat/Km) for nanotube encapsulated HRP remained almost the same before and after thermal treatment, reporting an average value of 3.7 ± 0.4 µM(-1) s(-1). The apparent kcat value for free HRP decreased from 14.8 ± 1.3 µM(-1) s(-1) for samples stored at 4 °C to 2.4 ± 0.1 µM(-1) s(-1) after thermal treatment for 8 h at 55 °C. The Michaelis-Menten constants, Km, determined for encapsulated HRP and free HRP were relatively unperturbed by storage conditions at 4 °C or thermally treated at 55 °C for varying time periods from 2-8 h, with encapsulated HRP having a slightly higher Km than free HRP (13.4 ± 0.9 µM versus 11.7 ± 0.4 µM). The amount of HRP encapsulated in LCA nanotubes increased dramatically when the mixture of HRP and LCA nanotubes was brought to an elevated temperature. Within 4 h of thermal treatment at 55 °C, the amount of HRP encapsulated by the LCA nanotubes was more than 4 times the amount of HRP encapsulated when equilibrated at 4 °C for 7 days. Molecular dynamics (MD) simulations show that the higher degree of exposure of hydrophobic residues in HRP at elevated temperatures enhances the hydrophobic interaction between HRP and the nanotube wall, resulting in the increased amount of HRP surface adsorption and, hence, the overall amount of encapsulation inside the nanotubes.

Mobile Versus Fixed Deployment of Automated External Defibrillators in Rural EMS.

INTRODUCTION: There is no consensus on where automated external defibrillators (AEDs) should be placed in rural communities to maximize impact on survival from cardiac arrest. In the community of Stokes County, North Carolina (USA) the Emergency Medical Services (EMS) system promotes cardiopulmonary resuscitation (CPR) public education and AED use with public access defibrillators (PADs) placed mainly in public schools, churches, and government buildings. HYPOTHESIS/PROBLEM: This study tested the utilization of AEDs assigned to first responders (FRs) in their private-owned-vehicle (POV) compared to AEDs in fixed locations. METHODS: The authors performed a prospective, observational study measuring utilization of AEDs carried by FRs in their POV compared to utilization of AEDs in fixed locations. Automated external defibrillator utilization is activation with pads placed on the patient and analysis of heart rhythm to determine if shock/no-shock is indicated. The Institutional Review Board of Wake Forest University Baptist Health System approved the study and written informed consent was waived. The study began on December 01, 2012 at midnight and ended on December 01, 2013 at midnight. RESULTS: During the 12-month study period, 81 community AEDs were in place, 66 in fixed locations and 15 assigned to FRs in their POVs. No utilizations of the 66 fixed location AEDs were reported (0.0 utilizations/AED/year) while 19 utilizations occurred in the FR POV AED study group (1.27 utilizations/AED/year; P<.0001). Odds ratio of using a FR POV located AED was 172 times more likely than using a community fixed-location AED in this rural community. Discussion Placing AEDs in a rural community poses many challenges for optimal utilization in terms of cardiac arrest occurrences. Few studies exist to direct rural community efforts in placing AEDs where they can be most effective, and it has been postulated that placing them directly with FRs may be advantageous. CONCLUSIONS: In this rural community, the authors found that placing AED devices with FRs in their POVs resulted in a statistically significant increase in utilizations over AED fixed locations.

Pico-force optical exchange (pico-FOX): utilizing optical forces applied to an orthogonal electroosmotic flow for particulate enrichment from mixed sample streams.

Results are reported from a combined optical force and electrokinetic microfluidic device that separates individual particulates from molecular components in a mixed sample stream. A pico-Newton optical force was applied to an orthogonal electroosmotic flow carrying a hydrodynamically pinched, mixed sample, resulting in the separation of the various particles from the sample stream. Different combinations of polystyrene, PMMA, and silica particles with a commercially available dye were utilized to test the different separation modes available, from purely optical force to combined optical and electrophoretic forces. The impact of various particle properties on particle separation and separation efficiency were explored, including size (2, 6, 10 µm), refractive index, and electrophoretic mobility. Particle addressability was achieved by moving particles to different outlets on the basis of particle size, refractive index, and electrophoretic differences. Separations of 6 and 10 µm polystyrene particles led to only 3% particle contamination in the original sample stream and interparticle type enrichment levels >80%. The unique addressability of three different particle materials (polystyrene, PMMA, and silica) of the same size (2 µm) led to each being separated into a unique outlet without measurable contamination of the other particle types using optical force and electrophoretic mobility. In addition to particle separation, the device was able to minimize dye diffusion, leading to >95% dye recovery. This combined platform would have applications for noninvasive sample preparation of mixed molecular/particulate systems for mating with traditional analytics as well as efficient removal of harmful, degrading components from complex mixtures.

Orthogonal optical force separation simulation of particle and molecular species mixtures under direct current electroosmotic driven flow for applications in biological sample preparation.

Presented here are the results from numerical simulations applying optical forces orthogonally to electroosmotically induced flow containing both molecular species and particles. Simulations were conducted using COMSOL v4.2a Multiphysics® software including the particle tracking module. The study addresses the application of optical forces to selectively remove particulates from a mixed sample stream that also includes molecular species in a pinched flow microfluidic device. This study explores the optimization of microfluidic cell geometry, magnitude of the applied direct current electric field, EOF rate, diffusion, and magnitude of the applied optical forces. The optimized equilibrium of these various contributing factors aids in the development of experimental conditions and geometry for future experimentation as well as directing experimental expectations, such as diffusional losses, separation resolution, and percent yield. The result of this work generated an optimized geometry with flow conditions leading to negligible diffusional losses of the molecular species while also being able to produce particle removal at near 100% levels. An analytical device, such as the one described herein with the capability to separate particulate and molecular species in a continuous, high-throughput fashion would be valuable by minimizing sample preparation and integrating gross sample collection seamlessly into traditional analytical detection methods.

TMEM135 is a Novel Regulator of Mitochondrial Dynamics and Physiology with Implications for Human Health Conditions.

Transmembrane proteins (TMEMs) are integral proteins that span biological membranes. TMEMs function as cellular membrane gates by modifying their conformation to control the influx and efflux of signals and molecules. TMEMs also reside in and interact with the membranes of various intracellular organelles. Despite much knowledge about the biological importance of TMEMs, their role in metabolic regulation is poorly understood. This review highlights the role of a single TMEM, transmembrane protein 135 (TMEM135). TMEM135 is thought to regulate the balance between mitochondrial fusion and fission and plays a role in regulating lipid droplet formation/tethering, fatty acid metabolism, and peroxisomal function. This review highlights our current understanding of the various roles of TMEM135 in cellular processes, organelle function, calcium dynamics, and metabolism.

Reducing drought emergencies in the Horn of Africa.

Drought-driven humanitarian emergencies are becoming more frequent in the Horn of Africa where millions of people in this arid region face chronic water and food insecurity. Evidence from the region shows increasing reliance on groundwater supplies, infrastructure and institutional systems in response to decreasing rainfall. Drought emergencies can be mitigated by investing in resilience efforts that make safe water reliably available at strategic groundwater abstraction locations during cycles of water stress. A combination of early warning data, policy reform, asset management and improved rural water supplies and maintenance may enable rapid, responsive, and accountable water governance that is more cost effective than emergency relief and better positioned to absorb and adapt to shocks.

Trace vapor generator for Explosives and Narcotics (TV-Gen).

The Trace Vapor Generator for Explosives and Narcotics (TV-Gen) is a portable and compact instrument designed to deliver a continuous source of trace-level vapors and vapor mixtures. It provides a tool to assist in the independent validation and verification of new materials and sensors under development for the vapor detection of explosives and narcotics. The design was conceived for use with a broad range of analytes, detection systems, materials, and sensors and to switch easily between the clean and analyte vapor streams. The TV-Gen system utilizes nebulization of aqueous analyte solutions, an oven to promote efficient transport, and a control box that provides dedicated computer control with logging capabilities. Resultant vapor streams are stable over several hours, with the vapor concentration controlled by a combination of aqueous analyte solution concentration, liquid flow rate through the nebulizer, and volume flow rate of air through the TV-Gen manifold.

A fritless, EOF microchip pump for high pressure pumping of aqueous and organic solvents.

A fritless, microchip electroosmotic flow (EOF) pump is microfabricated and demonstrated on a planar soda lime glass substrate to be capable of supplying reasonable flow rates under high back pressures, such as that required for micro-high pressure liquid chromatography (micro-HPLC). The microchip EOF pump is composed of a densely packed microchannel containing 800 nm silica particles and was capable of generating a maximum pressure > 1000 psi ( approximately 7 MPa) and a maximum flow rate of 282 nL/min (aqueous cyclohexylamino alkyl sulfonate (CHES) buffer, 10 mM, pH 9.0, 200 V/cm). Other pumping fluids, such as CHES buffer-acetonitrile mixture (50%, v/v), CHES buffer-methanol mixture (50%, v/v), and pure acetonitrile were also used in a characterization of pump performance that included determinations of the maximum flow rate, maximum pressure, and resulting flow rate against an applied, downstream back pressure. The flow rate under a 200 psi ( approximately 1.4 MPa) back pressure at an applied electric field strength of 250 V/cm ranged from 285 nL/min for aqueous CHES buffer to 44 nL/min for CHES buffer-acetonitrile mixture (50%, v/v), indicating that this EOF pump will meet the future requirements of a micro-HPLC system.

Micellar Electrokinetic Chromatography.

Micellar electrokinetic chromatography (MEKC) is a mode of capillary electrophoresis that allows for the separation of neutral molecules in an electric field. Typically, neutral molecules move with electroosmotic flow (EOF) or bulk flow during electrophoretic separations resulting in no temporal resolution between mixtures of neutral analytes. Inclusion of surfactant micelles in the separation buffer allows for the separation of neutral analytes from one another through association with the micelle. Here we outline the implementation of MEKC for the separation of neutral molecules using a mixture of nitroaromatic explosives and their degradation products serving as a test analyte mixture.

Flow-Through Optical Chromatography in Combination with Confocal Raman Microspectroscopy: A Novel Label-Free Approach To Detect Responses of Live Macrophages to Environmental Stimuli.

Flow-through optical chromatography (FT-OC), an advanced mode of optical chromatography, achieved baseline separation of a mixture of silica microparticles (SiO2, 1.00 and 2.50 µm) and a mixture of polystyrene microparticles (PS, 1.00, 2.00, and 3.00 µm) based on particle size. Comparisons made between experimentally determined velocities for the microparticles and theoretically derived velocities from Mie theory and Stokes' law validated the data collection setup and the data analysis for FT-OC. A population shift in live macrophages (cell line IC-21, ATCC TIB-186) responding to environmental stimuli was sensitively detected by FT-OC. The average velocity of macrophages stressed by nutritional deprivation was decreased considerably together with a small but statistically significant increase in cell size. Mie scattering calculations demonstrated that the small increase in cell size of macrophages stressed by nutritional deprivation was not entirely responsible for this decrease. Confocal fluorescence microscopy and atomic force microscopy (AFM) studies revealed morphological changes of macrophages induced by nutritional deprivation, and these changes were more likely responsible for the decrease in average velocity detected by FT-OC. Confocal Raman microspectroscopy was used to shed light upon biochemical transformations of macrophages suffering from nutritional deprivation.

Electroosmotic flow-based pump for liquid chromatography on a planar microchip.

An electroosmotic flow (EOF)-based pump, integrated with a sol-gel stationary phase located in the electric field-free region of a microchip, enabled the separation of six nitroaromatic and nitramine explosives and their degradation products via liquid chromatography (LC). The integrated pump and LC system were fabricated within a single quartz substrate. The pump region consisted of a straight channel (3.0 cm x 230 microm x 100 microm) packed with 5-microm porous silica beads. The sol-gel stationary phase was derived from a precursor mixture of methyltrimethoxy- and phenethyltrimethoxysilanes and was synthesized in the downstream, field-free region of the microchip, resulting in a stationary-phase monolith with dimensions of 2.6 cm x 230 microm x 100 microm. Fluid dynamic design considerations are discussed, especially as they relate to integrating the EOF pump with the LC system. Pump and separation performance, as characterized by flow rate measurements, injection, elution, separation, and detection, point to a viable analytical chemistry platform that encompasses all of the benefits expected of portable, laboratory-on-chip systems, including reduced sample requirements and small packaging.

Simple and rapid extraction, separation, and detection of alkaloids in beverages.

Implementation of an uncomplicated SPE process for the rapid extraction and preconcentration of the alkaloids, colchicine, strychnine, aconitine, and nicotine, from water, apple juice, and nonfat milk samples is presented. When coupled to analysis via micellar EKC (MEKC), the total analysis time per sample was less than 15 min for the water and juice samples and less than 20 min for the milk. The SPE process allowed for anywhere from a three to a fourteen-fold improvement in the LOD for each alkaloid when compared to detecting the alkaloids in a nontreated water sample matrix. Following SPE, the LODs for colchicine, strychnine, and nicotine were sufficient to meet levels from 150 to 5000 times more dilute than the LD(50) for a 50 kg individual drinking 12 oz of a contaminated beverage. Aconitine, on the other hand, was detected at approximately the LD(50) level. The percent recoveries for the SPE ranged from 37% to as high as 99%. Nicotine attained the highest recovery efficiencies, followed by colchicine, and finally, aconitine and strychnine, which were nearly identical. The greatest recovery efficiencies were achieved from apple juice and water, whereas nonfat milk yielded the lowest.

Sandwich electrochemical immunoassay for the detection of Staphylococcal enterotoxin B based on immobilized thiolated antibodies.

A new approach for the sensitive detection of Staphylococcal enterotoxin B (SEB) is presented based upon an electrochemical enzymatic immunoassay that utilizes thiolated antibodies immobilized on a gold surface. This method relies on the use of amine- or sulfhydryl-reactive heterobifunctional cross-linkers for the introduction of 2-pyridyl-disulfide groups to the antibody. The disulfide-containing linkages are subsequently cleaved with a suitable reducing agent, such as dithiothreitol (DTT), and the thiolated antibody-gold bond is covalently formed on a gold working electrode. Various cross-linking agents for immobilization of the capture antibody onto the gold electrode were investigated and compared. Factors influencing the thiolation and immobilization were investigated and optimized. The feasibility of such antibody immobilization and the subsequent sandwich enzyme immunoassay is demonstrated for the sensitive detection of SEB. The detection limit estimated from a representative dose-response curve is 1 ng/mL, corresponding to 5 pg in a 5-microL sample. Coupling the specificity of immunoassays with the sensitivity and low detection limits of electrochemical detection shows real promise for future sensing technology in enabling the development of single-use disposable devices.

Microchip-based electrochemical enzyme immunoassays.

In this chapter a microchip-based electrochemical enzyme immunoassay is developed and its performance is demonstrated for the determination of monoclonal mouse IgG as a model analyte. Such a direct homogeneous immunoassay requires the integration of electrokinetic mixing of alkaline phosphatase (ALP)-labeled anti-mouse IgG antibody (Ab-E) with the mouse IgG antigen (Ag) analyte in a precolumn reaction chamber, injection of immunochemical products into the separation channel, followed by rapid electrophoretic separation of enzyme-labeled free antibody and enzyme-labeled antibody-antigen complex. The separation is followed by a postcolumn reaction of enzyme tracer with p-aminophenyl phosphate (p-APP) substrate (S) and downstream amperometric detection of p-aminophenol (p-AP) product. Factors influencing the reaction, injection, separation, and detection processes are optimized. We have characterized the microchip-based immunoassay protocol. The resulting attractive analytical performance, along with distinct miniaturization and portability advantages of the electrochemical microsystem, offer considerable promise for designing self-contained and disposable chips for decentralized clinical diagnostics.

Reducing barriers to mental health care for student-athletes: An integrated care model.

Research suggests that National Collegiate Athletic Association (NCAA) Division I student-athletes have higher levels of stress and other behavioral health issues, including substance use, than nonathletes. For several reasons, student-athletes may be less likely to admit to behavioral health issues and seek mental health care. Integrated care is a model of care that integrates behavioral health into a medical practice. This article explores the newly released NCAA Best Mental Health Practice guidelines and the application of integrated care to a Division I athletic training room setting using the three-worldview framework for successful integration, incorporating clinical outcomes, operational reliability, and financial stability. (PsycINFO Database Record

Trace explosives sensor testbed (TESTbed).

A novel vapor delivery testbed, referred to as the Trace Explosives Sensor Testbed, or TESTbed, is demonstrated that is amenable to both high- and low-volatility explosives vapors including nitromethane, nitroglycerine, ethylene glycol dinitrate, triacetone triperoxide, 2,4,6-trinitrotoluene, pentaerythritol tetranitrate, and hexahydro-1,3,5-trinitro-1,3,5-triazine. The TESTbed incorporates a six-port dual-line manifold system allowing for rapid actuation between a dedicated clean air source and a trace explosives vapor source. Explosives and explosives-related vapors can be sourced through a number of means including gas cylinders, permeation tube ovens, dynamic headspace chambers, and a Pneumatically Modulated Liquid Delivery System coupled to a perfluoroalkoxy total-consumption microflow nebulizer. Key features of the TESTbed include continuous and pulseless control of trace vapor concentrations with wide dynamic range of concentration generation, six sampling ports with reproducible vapor profile outputs, limited low-volatility explosives adsorption to the manifold surface, temperature and humidity control of the vapor stream, and a graphical user interface for system operation and testing protocol implementation.

Effects of a nicotine conjugate vaccine on the acquisition and maintenance of nicotine self-administration in rats.

RATIONALE: Immunization of rats against nicotine using a nicotine conjugate vaccine reduces the distribution of nicotine to brain in rats and attenuates some of nicotine's physiological and behavioral effects. It is not known whether such a vaccine can attenuate nicotine's reinforcing effects. OBJECTIVE: The present experiment was conducted to determine whether a nicotine conjugate vaccine could interfere with the acquisition and maintenance of nicotine self-administration (NSA) in rats given 23 h day(-1) access to nicotine. METHODS: To examine acquisition of NSA, rats were vaccinated with nicotine or control immunogen prior to being given access to a 0.01 mg kg(-1) infusion(-1) nicotine under a fixed-ratio(FR) 1 schedule for week 1, FR 2 for week 2, and FR 3 for week 3. Acquisition of cocaine self-administration (CSA) was similarly examined to determine the specificity of vaccination effects. To examine maintenance of NSA, rats were initially trained to self-administer nicotine under an FR 3 schedule, and then vaccinated with nicotine or control immunogen while NSA continued to be monitored. RESULTS: NSA was significantly lower in vaccinated rats compared to controls during the acquisition protocol, with a 38% decrease in the number of infusions during the last week of training. The percentage of rats meeting acquisition criteria in the vaccinated group was lower (36%) than that in the control group (70%), but this difference was not statistically significant. Vaccination did not affect acquisition of CSA, demonstrating its specificity for nicotine. Maintenance of NSA was significantly reduced in vaccinated rats as compared to controls after the final vaccine injection, with a mean reduction of 57%. There was no evidence in either protocol that vaccinated rats attempted to compensate for altered nicotine distribution by increasing nicotine intake. CONCLUSION: These data suggest that vaccination against nicotine can reduce the reinforcing effects of nicotine in rats and may have therapeutic potential for the treatment of tobacco dependence.