RESUMO
The spatial distribution of Pt and Rh was assessed in Tagus estuary and their sources discussed. Both elements were analysed in superficial sediment samples (n = 72) by adsorptive cathodic stripping voltammetry. Concentrations varied within the following ranges: 0.18-5.1 ng Pt g-1 and 0.02-1.5 ng Rh g-1. Four distinct areas were established: "reference"; waste- and pluvial water discharge; motorway bridges and industrialised areas. The calculated reference median concentrations were 0.55 ng Pt g-1 and 0.27 ng Rh g-1. Linear relationships were found between Pt and Al, Fe and LOI, whereas Rh depicted scattered patterns. The highest concentrations were found nearby industrialised areas and a motorway bridge, corresponding to the enrichment of 10 and 6 times the background of Pt and Rh, respectively. The main sources of contamination to the Tagus estuary derived from historical and present industrial activities and from automotive catalytic converters. Large variations of Pt/Rh ratio (0.48-39) point to different sources, reactivity and dilution effects.
Assuntos
Monitoramento Ambiental , Platina/análise , Ródio/análise , Poluentes Químicos da Água/análise , Adsorção , Catálise , Estuários , Europa (Continente) , Sedimentos Geológicos/análise , Paládio/análiseRESUMO
A linear decapeptide containing three His and one Asp residues and a ß-turn-inducing dProPro unit was synthesised. A detailed potentiometric, mass spectrometric and spectroscopic study showed that at a 1:1 ratio of CCu /Cpeptide this peptide formed a major [CuH(O(dPro)-Asp)](2+) species (pH range 5.5-7.0), in which the Cu(2+) ion was bound to the His and Asp residues in square-planar or square-pyramidal geometries. The stability constant corrected for protonated species (log K* CuH(O dPro-Asp)=9.33) is almost equal to the value obtained for the parent [CuH(OAsp)](2+) species (log K*CuH(O-Asp) =9.28), but lower than that obtained for the cyclic [CuH(C-Asp)](2+) complex (log K*CuH(C-Asp) =10.79) previously published. Thus, the replacement of the ProGly unit by the stronger ß-turn-inducing dProPro unit did not generate a more stable copper(II) species, although the O(dPro)-Asp peptide was structured in solution, as shown by circular dichroism (CD) spectroscopy. Interestingly, the calculated value of Keff showed that this peptide behaved similarly to the O-Asp or C-Asp counterparts, depending on the pH value. The cyclic voltammetry data indicated that the most easily reducible species were [CuH(O-Asp)](2+) (E'(0) =262â mV versus a normal hydrogen electrode (NHE)) and [CuH(O(dPro)-Asp)](2+) (E'(0) =294â mV versus NHE) complexes, the peptidic scaffolds of which are open. A lower value was obtained for [CuH(C-Asp)](2+) (E'(0) =24â mV versus NHE). A different degree of non-reversibility was observed for the three copper(II) complexes; this could reflect a different degree of flexibility in their respective peptidic scaffolds.
Assuntos
Complexos de Coordenação/química , Cobre/química , Histidina/química , Peptídeos/química , Dicroísmo Circular , Concentração de Íons de Hidrogênio , Estrutura Molecular , Oxirredução , Peptídeos/metabolismoRESUMO
The MONITOOL project (2017-2023) was carried out to describe the relationships between total dissolved and labile metal concentrations measured in spot water samples and in concurrently deployed Diffusive Gradients in Thin-films (DGTs) passive samplers, respectively. The ultimate aim was to adapt existing marine metal Environmental Quality Standards (EQS marine water) for DGTs, enabling their use in the context of the European Directives (the Water Framework Directive (WFD) and the Marine Strategy Framework Directive (MSFD)). Time-integrated metal concentrations provided by DGTs, representing several days, are an advantage compared to conventional spot sampling, especially in highly dynamic systems, such as transitional waters. Hence, the MONITOOL project aimed to provide a robust database of dissolved and labile metal concentrations in transitional and coastal waters, based upon co-deployments of DGTs and collection of spot water samples at several sampling sites (England, France, Ireland, Italy, Northern Ireland, Portugal, Scotland and Spain), followed subsequently by DGT and water metal analysis. Samplings were carried out in 2018 and 2022, following agreed protocols developed in the framework of the project. The MONITOOL dataset includes metal concentrations from DGTs, measured with Inductively Coupled Plasma Mass Spectrometry (ICP-MS: Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn) and in concurrently collected spot water samples by ICP-MS (Al, Cd, Co, Cu, Mn, Ni, Pb, Zn) and Anodic/Cathodic Stripping Voltammetry (ASV/CSV: Cd, Pb, Ni). Moreover, data on seawater physical-chemical parameters (salinity, temperature, dissolved oxygen, pH, turbidity, total suspended solids, dissolved organic carbon, and total organic carbon) is provided. This database presents the results obtained using, concurrently, different forms of sampling and analytical techniques, enabling the comparison of the results obtained by these strategies and allowing the adaptation of EQS in marine water (EQS marine water) to DGTs (EQS DGT), in the context of the WFD. Moreover, due to the large number of sampling sites, it could also be used for other types of research, such as those dealing with metal speciation or the determination of baseline levels.
RESUMO
In order to move forward in the acceptance of a novel contaminant monitoring technique (Diffusive Gradients in Thin-films: DGT) for assessment of marine water bodies, sensu the WFD, an Inter-Laboratories Comparison (ILC) exercise (nine Europeans laboratories) was organized in the framework of the Interreg Atlantic Area MONITOOL project, which focused on the use of the DGT technique for the measurement of WFD priority metals (Cd, Ni and Pb). Reproducible results were obtained for each metal by several laboratories, supporting the assertion that DGT analysis can be performed satisfactorily by laboratories experienced in measuring metals at trace levels in marine environments, even if they have limited practice in DGT analysis. According to the Z-score analysis, among the 9 participating laboratories, 3 had 100 % of satisfactory results for Cd, Ni, and Pb, 3 had >80 % satisfactory results and 2 had about 60 % satisfactory results. This work highlights the need to clearly describe the DGT method in order to control sources of contamination during analytical steps, in particular the resin gel retrieval and the elution steps. Such international intercomparison exercise is an important step to develop the laboratory network involved in DGT analysis and contributes to the improvement of data quality.
Assuntos
Monitoramento Ambiental , Poluentes Químicos da Água , Cádmio/análise , Difusão , Monitoramento Ambiental/métodos , Humanos , Chumbo/análise , Água/análise , Poluentes Químicos da Água/análiseRESUMO
This study investigates the relationships among Ni, Cd and Pb's different chemical forms determined by different methodologies in coastal and transitional waters across a broad geographical scale. Concentrations were measured in spot samples and through passive sampling (DGT). High variability of metal concentrations was found among sampling sites and methodologies due to natural water fluctuations rather than to a given metal or method. Total dissolved metal concentrations in spot samples were lower than the EQS-WFD values. The labile fractions of Cd and Pb, measured in spot samples by Anodic Stripping Voltammetry and by DGT-ICPMS, were highly correlated. Similar labilities were found for Cd, while for Pb, the ASV labile fraction was ≈50% lower. These results reflect the pool of mobile and labile species available towards each technique kinetic window, and they seem not to be affected by discrete sampling flaws.
Assuntos
Monitoramento Ambiental , Poluentes Químicos da Água , Cádmio/análise , Monitoramento Ambiental/métodos , Chumbo/análise , Poluentes Químicos da Água/análiseRESUMO
In this work it is demonstrated that the characterization of c-type haem containing proteins by electrochemical techniques needs to be cautiously performed when using pyrolytic graphite electrodes. An altered form of the cytochromes, which has a redox potential 300 mV lower than that of the native state and displays peroxidatic activity, can be induced by interaction with the pyrolytic graphite electrode. Proper control experiments need to be performed, as altered conformations of the enzymes containing c-type haems can show activity towards the enzyme substrate. The work was focused on the study of the activation mechanism and catalytic activity of cytochrome c peroxidase from Paracoccus pantotrophus. The results could only be interpreted with the assignment of the observed non-turnover and catalytic signals to a non-native conformation state of the electron-transferring haem. The same phenomenon was detected for Met-His monohaem cytochromes (mitochondrial cytochrome c and Desulfovibrio vulgaris cytochrome c-553), as well as for the bis-His multihaem cytochrome c(3) from Desulfovibrio gigas, showing that this effect is independent of the axial coordination of the c-type haem protein. Thus, the interpretation of electrochemical signals of c-type (multi)haem proteins at pyrolytic graphite electrodes must be carefully performed, to avoid misassignment of the signals and incorrect interpretation of catalytic intermediates.
Assuntos
Carbono/química , Eletroquímica/métodos , Eletrodos , Hemeproteínas/química , Citocromo-c Peroxidase/química , Paracoccus pantotrophus/enzimologia , Estrutura Secundária de ProteínaRESUMO
Rhodium and platinum are amongst the less studied elements in estuarine waters and the understanding of their speciation analysis and environmental fate remains limited. In this study, we address the occurrence and discrimination of soluble/insoluble Rh and Pt species in aquatic systems, as well as their potential transport. Particulate and dissolved (< 0.45 µm) rhodium (RhP and RhD) and platinum (PtP and PtD), respectively, were determined in the water column of contrasting environments during neap (NT) and spring (ST) tide semi-diurnal cycles: in the upper Tagus estuary (VFX) and near the mouth, close to a wastewater treatment plant outfall (ALC). Both elements were analyzed by AdCSV and ICP-MS, as well ancillary parameters were determined. Concentrations of Rh and Pt followed the tidal regime, presenting higher concentrations during low tide. Concentrations of RhP (0.1-5.1 ng g-1) and RhD (0.03-0.12 ng L-1) were lower than PtP (1.0-25.6 ng g-1) and PtD (0.1-11.7 ng L-1), respectively. Concentrations found in ALC were higher than VFX, except for RhD, mirroring anthropogenic inputs attributed to automotive catalytic converters and an additional Pt source originated in Pt-based compounds. Distribution coefficients (KD) of 104 were computed and were independent of the salinity gradient. The speciation analysis done at VFX during NT showed that truly dissolved forms measured by AdCSV represented 39 ± 9% of total Pt in the water column, while total filter-passing species measured by ICP-MS were higher, 65 ± 14%. Pt speciation was controlled by its dissolved forms, whereas particulate Rh forms represented the bulk value (> 65%). The potential transport evaluated at downstream station indicated recirculation within the estuary and export towards the Atlantic Ocean, with higher concentrations associated with the ebb opposing to the flood. These results show estuaries as important pathways to introduce PGE in coastal regions, transferring them towards the ocean.
RESUMO
The current study evaluates the effect of seawater physico-chemical characteristics on the relationship between the concentration of metals measured by Diffusive Gradients in Thin films (DGT) passive samplers (i.e., DGT-labile concentration) and the concentrations measured in discrete water samples. Accordingly, Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was used to measure the total dissolved metal concentrations in the discrete water samples and the labile metal concentrations obtained by DGT samplers; additionally, lead and cadmium conditional labile fractions were determined by Anodic Stripping Voltammetry (ASV) and total dissolved nickel was measured by Cathodic Stripping Voltammetry (CSV). It can be concluded that, in general, the median ratios of DGT/ICP and DGT/ASV(CSV) were lower than 1, except for Ni (median ratio close to 1) and Zn (higher than 1). This indicates the importance of speciation and time-integrated concentrations measured using passive sampling techniques, which is in line with the WFD suggestions for improving the chemical assessment of waterbodies. It is the variability in metal content in waters rather than environmental conditions to which the variability of the ratios can be attributed. The ratios were not significantly affected by the temperature, salinity, pH, oxygen, DOC or SPM, giving a great confidence for all the techniques used. Within a regulatory context such as the EU Water Framework Directive this is a great advantage, since the simplicity of not needing to use corrections to minimize the effects of environmental variables could help in implementing DGTs within monitoring networks.
RESUMO
This protocol was developed based on the knowledge acquired in the framework of the Interreg MONITOOL project (EAPA_565/2016) where extensive sampling campaigns were performed in transitional and coastal waters covering eight European countries. It provides detailed procedures and guidelines for the sampling of these waterbodies by concurrent collection of discrete water samples and the deployment of Diffusive Gradient in Thin-films (DGT) passive samplers for the measurement of trace metal concentrations. In order to facilitate the application of this protocol by end-users, it presents steps to follow in the laboratory prior to sampling campaigns, explains the procedures for field campaigns (including in situ measurement of supporting parameters) and subsequent sample processing in the laboratory in preparation for trace metal analyze by inductively coupled plasma-mass spectrometry (ICP-MS) and voltammetry. The protocol provides a systematic, coherent field sampling and sample preparation strategy that was developed in order to ensure comparability and reproducibility of the data obtained from each project Partner in different regions. ⢠Standardization of the concurrent sampling of transitional and coastal waters by DGT passive samplers and spot sampling. ⢠Robust procedures and tips based on existing international standards and comprehensive practical experience. ⢠Links to demonstration videos produced within the MONITOOL project.
RESUMO
Road dust is a major reservoir of anthropogenic Pt and Rh. However, information about how these elements are released to the aquatic systems under environmentally relevant conditions is scarce. In this work, an innovative combination of analytical strategies is used to provide insight into the speciation analysis of those elements. A composite sample of road dust thoroughly characterized was incubated over 7 days in synthetic rainwater and seawater. In the filtered (<0.45 µm) solutions, truly dissolved Pt and Rh concentrations were measured by adsorptive cathodic stripping voltammetry, while total concentrations were determined by inductively coupled plasma mass spectrometry. Truly dissolved species corresponded to a small fraction of total Pt and Rh in the road dust; accordingly, values of 0.01% and 0.1% were obtained in both media for Pt and Rh, respectively, which remained constant over time. The concentration of total filter-passing species predominates for both elements by a factor of 10 and 2-3 for Pt and Rh, respectively, evidencing that particulate species coexist with truly dissolved forms. Temporal variations were observed for Pt, as opposed to Rh. These findings contribute to the gap in knowledge regarding Pt and Rh mobility in aquatic systems.
RESUMO
INTRODUCTION: Knowledge of xylem sap chemical composition is important to the understanding of translocation, detoxification and tolerance mechanisms. However, the small amount of sample available often hampers its characterisation. Hence, low volume consumption techniques are needed for xylem sap analysis. OBJECTIVE: To develop a microsampling technique for the determination of elements in xylem sap from different plants by flame atomic absorption spectrometry (FAAS). METHODOLOGY: The microsampling device was optimised in terms of sample volume and integration time. The analytical characteristics of the microsampling technique (micro-FAAS) were established and compared with those of FAAS with traditional continuous nebulisation. The method was validated by means of an independent technique. RESULTS: Ca, Mg and Ni were determined in a 50 microL aliquot of xylem sap solution/element that was introduced directly into the flame via the microsampling accessory. Good precision was obtained with relative standard deviations of 1.1, 0.6 and 2.3% for Ca, Mg and Ni, respectively. Matrix effects resulting from the physical characteristics of the samples and possible chemical interferences caused by phosphate and/or sulphate were ruled out. CONCLUSION: A simple, rapid and reproducible microsampling technique coupled to FAAS was developed and successfully applied in the determination of Ca, Mg and Ni in xylem sap.
Assuntos
Cálcio/análise , Magnésio/análise , Níquel/análise , Espectrofotometria Atômica/métodos , Xilema/química , Brassicaceae/química , Cálcio/normas , Calibragem , Cistaceae/química , Magnésio/normas , Níquel/normas , Extratos Vegetais/análise , Extratos Vegetais/química , Extratos Vegetais/isolamento & purificação , Padrões de Referência , Reprodutibilidade dos Testes , Espectrofotometria Atômica/instrumentaçãoRESUMO
The determination of Platinum-group elements (PGE) in relevant environmental matrices is a challenging task. Sensitive and accurate analytical procedures for simultaneous determination of Pt and Rh are still needed. In this study, we report for the first time on the use of second derivative signal transformation to the ultra-trace simultaneous determination of Pt and Rh by Adsorptive Cathodic Stripping Voltammetry (AdCSV). With that step, the ill-defined peaks typically observed in the original voltammograms are transformed into well-shaped peaks, resulting in accurate detection. The experimental conditions were investigated and optimised: a suitable electrolyte for both elements, with less reagents consumption, (0.25M H2SO4, 0.05M HCl, 0.01M FA and 0.5mM HZ), deposition time (td) and deposition potential (Ed). For td = 120s and Ed = -0.75V, linear relationships r > 0.999 were obtained in the concentration range up to 5.8ngL-1 (27 pM) for Pt and up to 3.4ngL-1 (34 pM) for Rh. Limits of detection were 0.2ngL-1 for Pt and 0.08ngL-1 for Rh. Lower values can be achieved by increasing the deposition time. Limits of quantification, LOQ, calculated as 3 times LOD, were 0.5ngL-1 for Pt and 0.2ngL-1 for Rh. The sensitivity of Pt was affected by elevated Zn concentrations, whereas a minor effect was observed for Rh. However, Pt and Rh determinations were not influenced using the standard addition method. Precision as intermediate precision and expressed as relative standard deviation, based on Pt and Rh spiked solutions and digested road dust CRM BCR-723 was 17% and 20% for Pt and Rh, respectively. Recoveries of CRM were around 90% for both elements. The method was successfully applied in the simultaneous determination of Pt and Rh in sediments from Tagus estuary and, for the first time, dissolved Rh was determined in water samples of a waste water treatment plant. Application of this technique in a multidisciplinary approach will be a relevant contribution to the current understanding of PGE cycle and fate in the environment.
RESUMO
Nickel speciation was studied in the xylem sap of Alyssum serpyllifolium ssp. lusitanicum, a Ni-hyperaccumulator endemic to the serpentine soils of northeast Portugal. The xylem sap was collected from plants growing in its native habitat and characterized in terms of carboxylic and amino acids content. The speciation of nickel was studied in model and real solutions of xylem sap by voltammetric titrations using Square Wave Voltammetry (SWV). The results showed that Ni transport in the xylem sap occurs mainly as a free hydrated cation (about 70%) and complexed with carboxylic acids, mainly citric acid (18%). Altogether, oxalic acid, malic acid, malonic acid and aspartic acid complexed less than 13% of total Ni. A negligible amount bounded to the amino acids, like glutamic acid and glutamine (<1%). Histidine did not play a role in Ni translocation in the xylem sap of A. serpyllifolium under field conditions. Amino acids are one of the main forms of N transport in the xylem sap, and under field conditions, N is usually a limited nutrient. We hypothesize that the translocation of Ni in the xylem sap as a free ion or chelated with carboxylic acids is 'cheaper' in terms of N resources.
Assuntos
Brassicaceae/metabolismo , Níquel/metabolismo , Xilema/metabolismo , Aminoácidos/análise , Aminoácidos/metabolismo , Transporte Biológico , Brassicaceae/química , Ácidos Carboxílicos/análise , Ácidos Carboxílicos/metabolismo , Cromatografia Líquida de Alta Pressão/métodos , Cromatografia de Fase Reversa/métodos , Portugal , Solo/química , Xilema/químicaRESUMO
This work reports on the direct electrochemistry of the Desulfovibrio gigas aldehyde oxidoreductase (DgAOR), a molybdenum enzyme of the xanthine oxidase family that contains three redox-active cofactors: two [2Fe-2S] centers and a molybdopterin cytosine dinucleotide cofactor. The voltammetric behavior of the enzyme was analyzed at gold and carbon (pyrolytic graphite and glassy carbon) electrodes. Two different strategies were used: one with the molecules confined to the electrode surface and a second with DgAOR in solution. In all of the cases studied, electron transfer took place, although different redox reactions were responsible for the voltammetric signal. From a thorough analysis of the voltammetric responses and the structural properties of the molecular surface of DgAOR, the redox reaction at the carbon electrodes could be assigned to the reduction of the more exposed iron cluster, [2Fe-2S] II, whereas reduction of the molybdopterin cofactor occurs at the gold electrode. Voltammetric results in the presence of aldehydes are also reported and discussed.