Novel Nanostructured Lipid Carriers Co-Loaded with Mesalamine and Curcumin: Formulation, Optimization and In Vitro Evaluation.

PURPOSE: The aim of current study is to formulate, optimize and characterize the developed formulation of Mesalamine-Curcumin Nanostructured Lipid Carriers (Mes-Cur NLCs). METHODS: It was formulated using high pressure homogenization followed by probe sonication and formulation variables were optimized using Central Composite Design. The particle size (PS), zeta potential (ZP), entrapment efficiency (EE), drug release, cytotoxicity on NIH 3T3 fibroblasts cells and HaCaT keratinocytes cells and efficacy on RAW264.7 cells for optimized formulation was determined. RESULTS: The PS, ZP and EE were found to be 85.26 nm, -23.7 ± 7.45 mV, 99.2 ± 2.62 % (Mes) and 84 ± 1.51 % (Cur), respectively. The good correlation between predicted and obtained value indicated suitability and reproducibility of experimental design. NLCs showed spherical shape as confirmed by TEM. In vitro drug release profile of prepared formulation showed that Mes exhibited 100 % release at 48 h, whereas Cur exhibited 82.23 ± 2.97% release at 120 h. Both the drugs exhibited sustained release upon incorporation into the NLCs. The absence of any significant cell death during MTT assay performed on NIH 3T3 fibroblasts cells and HaCaT keratinocytes cells indicated that NLCs' were safe for use. Furthermore, significant reduction in nitric oxide level during anti-inflammatory evaluation of formulation on RAW264.7 cells showed excellent potential for the formulation to treat inflammation. The formulation was found stable as no significant difference between the PS, ZP and EE of the fresh and aged NLCs was observed. CONCLUSION: The outcomes of study deciphered successful formulation of Mes-Cur NLCs.

Delivery routes for faecal microbiota transplants: Available, anticipated and aspired.

Fecal microbiota transplant (FMT) has seen a historic emergence in last decade with its sojourn recently entering into a chequered path, due to a few reports of infection and subsequent mortality. Though FMT has been extensively reported, there is no comprehensive report on the delivery routes available for this non-pharmacological treatment option. Safety, efficacy and cost of FMT not only depend on the quality of contents but also on the delivery route employed. A number of delivery routes are in use for conducting FMT, which include upper gastrointestinal routes (UGI) i.e. nasogastric/nasojejunal tube, endoscopy, oral capsules and lower gastrointestinal routes (LGI) like retention enema, sigmoidoscopy or colonoscopy. Capsules, both conventional as well as colon targeted have been the most commonly used formulations. Surprisingly, the success rates with conventional gastric delivery capsules and colon targeted capsules were found to be quite similar indicating the sufficiency of the inoculum size to withstand the microbial loss in the gastric milieu. Patient compliance, cost effectiveness, comfort of administration, level of invasiveness, patient's hospital admission, risk of aspiration and infections, multiplicity of administration required, recurrence rate are the main factors that seem to influence the choice for route of administration of physicians. The best route for FMT has not been established yet. Extensive studies are required to understand the interplay of route adopted, type of donor, physical nature of sample (fresh or frozen), patient compliance and cost effectiveness to design an approach for the risk free, convenient and cost-effective administration route for FMT.

Impact of solidification on micromeritic properties and dissolution rate of self-nanoemulsifying delivery system loaded with docosahexaenoic acid.

Development of self-nanoemulsifying drug delivery systems (SNEDDS) of docosahexaenoic acid (DHA) is reported with the aim to achieve enhanced dissolution rate. The optimized composition of liquid SNEDDS (L-SNEDDS) formulation was Labrafil M1944 CS, 47% v/v Tween 80, 27% v/v Transcutol P, and 0.1% v/v DHA. L-SNEDDS were solidified using Syloid XDP 3150 as solid porous carrier. The droplet size, polydispersity index, zeta potential, percentage drug loading, and cloud point for L-SNEDDS were found to be 43.51 ± 1.36 nm, 0.186 ± 0.053, -19.20 ± 1.21 mV, 93.23 ± 1.71, and 88.60 ± 2.54 °C, respectively. Similarly, for solid SNEDDS (S-SNEDDS) the above parameters were found to be 57.32 ± 1.87 nm, 0.261 ± 0.043, -16.60 ± 2.18 mV, 91.23 ± 1.88, and 89.50 ± 1.18 °C, respectively. The formulations (L-SNEDDS, S-SNEDDS powder, and S-SNEDDS tablet) showed significant (p<.05) improvement in dissolution rate of drug in 0.1 N HCl (pH 1.2) and phosphate buffer (pH 6.8) as compared to unprocessed DHA. In both the dissolution media, the dissolution rate was found more that 85% in 90 min. Absence of drug precipitation, phase separation, and turbidity during thermodynamic stability studies indicated that the developed SNEDDS were stable. Hence, it was concluded that SNEDDS have offered sufficient stability as well as dissolution rate of DHA.

Polysaccharide-fecal microbiota-based colon-targeted self-nanoemulsifying drug delivery system of curcumin for treating polycystic ovarian syndrome.

The gut microbiome is involved in the pathogenesis of many diseases including polycystic ovarian syndrome (PCOS). Modulating the gut microbiome can lead to eubiosis and treatment of various metabolic conditions. However, there is no proper study assessing the delivery of microbial technology for the treatment of such conditions. The present study involves the development of guar gum-pectin-based solid self-nanoemulsifying drug delivery system (S-SNEDDS) containing curcumin (CCM) and fecal microbiota extract (FME) for the treatment of PCOS. The optimized S-SNEDDS containing FME and CCM was prepared by dissolving CCM (25 mg) in an isotropic mixture consisting of Labrafil M 1944 CS, Transcutol P, and Tween-80 and solidified using lactose monohydrate, aerosil-200, guar gum, and pectin (colon-targeted CCM solid self-nanoemulsifying drug delivery system [CCM-CT-S-SNEDDS]). Pharmacokinetic and pharmacodynamic evaluation was carried out on letrozole-induced female Wistar rats. The results of pharmacokinetic studies indicated about 13.11 and 23.48-fold increase in AUC of CCM-loaded colon-targeted S-SNEDDS without FME (CCM-CT-S-SNEDDS (WFME)) and CCM-loaded colon-targeted S-SNEDDS with FME [(CCM-CT-S-SNEDDS (FME)) as compared to unprocessed CCM. The pharmacodynamic study indicated excellent recovery/reversal in the rats treated with CCM-CT-S-SNEDDS low and high dose containing FME (group 13 and group 14) in a dose-dependent manner. The developed formulation showcasing its improved bioavailability, targeted action, and therapeutic activity in ameliorating PCOS can be utilized as an adjuvant therapy for developing a dosage form, scale-up, and technology transfer.

In Situ Photo Responsive Biodegradable Nanoparticle Forming Intrauterine Implant for Drug Delivery to Treat Ovarian Diseases: A Rationale-based Review.

BACKGROUND: Ovarian disease constitutes various types of endocrine disorders, such as polycystic ovarian syndrome (PCOS), ovarian cancer, premature ovarian failure, ovarian endometriosis, and ovarian cysts. The prevalence of ovarian-related diseases is highly vulnerable in the world. The utility of various drug delivery systems for ovarian diseases has resulted in varied success. Moreover, most of them lead to severe adverse effects and are incapable of ameliorating the signs and symptoms of the condition. HYPOTHESIS: Intrauterine devices (IUDs) have positioned themselves as a mechanism to deliver the drug for various ovarian-related diseases. Thereby avoiding various stability-related issues arising due to various physiological barriers of the female reproductive tract. However, the use of intrauterine devices for drug delivery to the ovaries has not been fully explored. This is attributed to the fact that they cause cysts in the ovaries and skepticism among patients and physicians. Photo-sensitive devices are an appealing approach for managing disorders affecting the ovaries. Photo-sensitive in situ forming intrauterine implants (IUIs) have several advantages, including simplicity in application, reduced invasiveness, as well as improved site-specific drug release control. Polymeric nanoparticles (PNPs) loaded with a drug may be a suitable choice to provide sustained release, alter the pharmacokinetics, and reduce the dose and dosing frequency. CONCLUSION: The current manuscript hypothesizes the utility of a PNP-loaded biodegradable photo-responsive intrauterine implantable device as an alternate novel strategy for ameliorating ovarian-related diseases.

HPMCAS-Based Amorphous Solid Dispersions in Clinic: A Review on Manufacturing Techniques (Hot Melt Extrusion and Spray Drying), Marketed Products and Patents.

Today, therapeutic candidates with low solubility have become increasingly common in pharmaceutical research pipelines. Several techniques such as hot melt extrusion, spray drying, supercritical fluid technology, electrospinning, KinetiSol, etc., have been devised to improve either or both the solubility and dissolution to enhance the bioavailability of these active substances belonging to BCS Class II and IV. The principle involved in all these preparation techniques is similar, where the crystal lattice of the drug is disrupted by either the application of heat or dissolving it in a solvent and the movement of the fine drug particles is arrested with the help of a polymer by either cooling or drying to remove the solvent. The dispersed drug particles in the polymer matrix have higher entropy and enthalpy and, thereby, higher free energy in comparison to the crystalline drug. Povidone, polymethaacrylate derivatives, hydroxypropyl methyl cellulose (HPMC) and hydroxypropyl methylcellulose acetate succinate derivatives are commonly used as polymers in the preparation of ASDs. Specifically, hydroxypropylmethylcellulose acetate succinate (HPMCAS)-based ASDs have become well established in commercially available products and are widely explored to improve the solubility of poorly soluble drugs. This article provides an analysis of two widely used manufacturing techniques for HPMCAS ASDs, namely, hot melt extrusion and spray drying. Additionally, details of HPMCAS-based ASD marketed products and patents have been discussed to emphasize the commercial aspect.

Quality by Design-based RP-HPLC Method for Estimation of Curcumin in Rat Plasma and Fecal Microbiota Extract-based Solid Self-nano Emulsifying Drug Delivery System.

BACKGROUND: Curcumin (CRM) is known to possess various therapeutic properties, such as anti-inflammatory and antidiabetic properties, and is, therefore, considered to be an effective therapeutic. OBJECTIVE: A sensitive method for the estimation of CRM in plasma, as well as fecal matter-based solid self-nano emulsifying drug delivery system (S-SNEDDS), has been reported for the first time. METHODS: A bioanalytical method was optimized using Box-Behnken Design having 13 runs and 3 responses. The optimized method was developed using methanol and water (70:30 v/v) with a flow rate of 1 mL/min. Quercetin was used as an internal standard. A specificity test was also performed for the developed CRM solid self-nano emulsifying drug delivery system. RESULTS: The retention time of CRM was found to be 14.18 minutes. The developed method was validated and found to be linear in the range of 50-250 ng/mL with an R2 of 0.999. Accuracy studies indicated that CRM had a percentage recovery of less than 105% and more than 95%, respectively. Precision studies were carried out for inter, intraday, and inter-analyst precision, and the %RSD was found to be less than 2%. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 3.37 ng/mL and 10.23 ng/mL, respectively. Stability studies for shortterm, long term and freeze-thaw cycles showed a %RSD of less than 2%, indicating the stability of CRM in the plasma matrix. Moreover, the blank fecal microbiota extract slurry did not show any peak at the retention time of CRM in a CRM-loaded solid nanoemulsifying drug delivery system containing fecal microbiota extract indicating its specificity. CONCLUSION: Hence, the developed method can have clinical implications as it helps estimate CRM in blood samples and also provides a simple and sensitive method for the estimation of plant-based flavonoids along with fecal microbiota extract formulations.

Interplay of Gut Microbiota in Polycystic Ovarian Syndrome: Role of Gut Microbiota, Mechanistic Pathways and Potential Treatment Strategies.

Polycystic Ovarian Syndrome (PCOS) comprises a set of symptoms that pose significant risk factors for various diseases, including type 2 diabetes, cardiovascular disease, and cancer. Effective and safe methods to treat all the pathological symptoms of PCOS are not available. The gut microbiota has been shown to play an essential role in PCOS incidence and progression. Many dietary plants, prebiotics, and probiotics have been reported to ameliorate PCOS. Gut microbiota shows its effects in PCOS via a number of mechanistic pathways including maintenance of homeostasis, regulation of lipid and blood glucose levels. The effect of gut microbiota on PCOS has been widely reported in animal models but there are only a few reports of human studies. Increasing the diversity of gut microbiota, and up-regulating PCOS ameliorating gut microbiota are some of the ways through which prebiotics, probiotics, and polyphenols work. We present a comprehensive review on polyphenols from natural origin, probiotics, and fecal microbiota therapy that may be used to treat PCOS by modifying the gut microbiota.

Harnessing role of sesamol and its nanoformulations against neurodegenerative diseases.

Sesamol is a lignan of sesame seeds and a natural phenolic molecule that has emerged as a useful medical agent. Sesamol is a non-toxic phytoconstituent, which exerts certain valuable effects in the management of cancer, diabetes, cardiovascular diseases, neurodegenerative diseases (NDs), etc. Sesamol is known to depict its neuroprotective role by various mechanisms, such as metabolic regulators, action on oxidative stress, neuroinflammation, etc. However, its poor oral bioavailability, rapid excretion (as conjugates), and susceptibility to gastric irritation/toxicity (particularly in rats' forestomach) may restrict its effectiveness. To overcome the associated limitations, novel drug delivery system-based formulations of sesamol are emerging and being researched extensively. These can conjugate with sesamol and enhance the bioavailability and solubility of free sesamol, along with delivery at the target site. In this review, we have summarized various research works highlighting the role of sesamol on various NDs, including Alzheimer's disease, Huntington's disease, Amyotrophic lateral sclerosis, and Parkinson's disease. Moreover, the formulation strategies and neuroprotective role of sesamol-based nano-formulations have also been discussed.

Applications and advancements of nanoparticle-based drug delivery in alleviating lung cancer and chronic obstructive pulmonary disease.

Lung cancer (LC) and chronic obstructive pulmonary disease (COPD) are among the leading causes of mortality worldwide. Cigarette smoking is among the main aetiologic factors for both ailments. These diseases share common pathogenetic mechanisms including inflammation, oxidative stress, and tissue remodelling. Current therapeutic approaches are limited by low efficacy and adverse effects. Consequentially, LC has a 5-year survival of < 20%, while COPD is incurable, underlining the necessity for innovative treatment strategies. Two promising emerging classes of therapy against these diseases include plant-derived molecules (phytoceuticals) and nucleic acid-based therapies. The clinical application of both is limited by issues including poor solubility, poor permeability, and, in the case of nucleic acids, susceptibility to enzymatic degradation, large size, and electrostatic charge density. Nanoparticle-based advanced drug delivery systems are currently being explored as flexible systems allowing to overcome these limitations. In this review, an updated summary of the most recent studies using nanoparticle-based advanced drug delivery systems to improve the delivery of nucleic acids and phytoceuticals for the treatment of LC and COPD is provided. This review highlights the enormous relevance of these delivery systems as tools that are set to facilitate the clinical application of novel categories of therapeutics with poor pharmacokinetic properties. This picture was generated with BioRender.