Are non-indigenous species hitchhiking offshore farmed mussels? A biogeographic and functional approach.

The epifauna associated to farmed mussels in southern Portugal coast was analysed, aiming at identifying the species with spreading potential through commercial transport. The presence of a relevant number of the species here found is not reported to at least one of the common mussel export/transposition countries. Indeed, important species biogeographic dissimilarities between the mussel farm area and the Greater North Sea and Western Mediterranean Sea sub-regions were detected, suggesting the potential transport of non-indigenous species (NIS) into other countries. Among them, fouling species such as the anemones Paractinia striata and Urticina felina, the acorn barnacles Balanus glandula and Balanus trigonus or the bryozoans Bugulina stolonifera and Schizoporella errata exhibit functional attributes that allow them to colonise and spread in new areas. This combined biogeographic and functional approach may contribute to clarify the role of aquaculture on the transport of NIS and to predict and prevent their spreading worldwide.

Unilateral accumbal dopamine depletion affects decision-making in a side-specific manner.

Mechanisms underlying affective and cognitive deficits in Parkinson's disease (PD) remain less studied than motor symptoms. Nucleus accumbens (NAc) is affected in PD and due to its well-known involvement in motivation is an interesting target in this context. Furthermore, PD is frequently asymmetrical, with side-specific deficits aligning with evidences of accumbal laterality. We therefore used a 6-hydroxydopamine (6-OHDA) model to study the role of left and right NAc dopamine depletion in a battery of behavioral tasks. 2 months old male rats were used in all experiments. Habitual-based and goal-directed decision-making, impulsivity, anxiety- and depressive-like behavior and motor performance were tested 3 weeks after left (6-OHDA L) or right (6-OHDA R) NAc lesion was induced. Upon contingency degradation, 6-OHDA R decrease their lever press rate less than Sham and 6-OHDA L, indicating an impairment in the shift from habit-based to goal-directed strategies. On the other hand, 6-OHDA L lesions lead to increased rates of premature responding when delays where increased in the variable delay-to-signal test. Importantly, in both paradigms task acquisition was similar between groups. In the same line we found no differences in the amount of sugared pellets eaten when freely available as well as in both general and fine motor behaviors. In conclusion, left and right NAc play distinct roles in the contingency degradation and impulsivity. More studies are needed to understand the mechanisms behind this functional lateralization and its implications for PD patients.

Effects of lopinavir-ritonavir combined therapy during the rat pregnancy. Morphological and biochemical aspects.

OBJECTIVE: To evaluate the biochemical and morphological effects in rats subjected to three different dose associations of the protease inhibitors lopinavir and ritonavir administered throughout the entire period of pregnancy. STUDY DESIGN: The animals were treated throughout pregnancy with daily oral doses of lopinavir+ritonavir starting at the day one of pregnancy, and were divided into four groups: E1, 13.3+3.3 mg/kg; E2, 39.9+9.9 mg/kg; E3, 119.7+29.9 mg/kg and C, control (drug vehicle, propyleneglycol). The animals were then sacrificed and maternal blood and fetal and maternal organ samples were taken for morphological and biochemical analysis. RESULTS: No major changes were identified in the group treated with the lowest dose as compared with the control. In the group E2, we found hepatocytes with signs of atrophy, eosinophilic cytoplasm, picnotic nuclei and vasodilatation. The proximal convoluted tubules of maternal kidneys showed eosinophilic areas and hyperchromatic nuclei, as well as signs of vasodilation. In the group treated with the highest dose (group E3), in the maternal kidneys and livers, the morphological changes were similar to those found in E2, although more prominent. Regarding the fetal organs, the single abnormality observed was some liver vasodilation in the group E3 (highest dose). The treatment with lopinavir+ritonavir caused discrete, yet significant, alterations of aspartate aminotransferase activity, blood urea nitrogen and creatinine plasma levels. CONCLUSIONS: Our results showed that the administration of a combination of lopinavir plus ritonavir to pregnant rats can cause morphological as well as functional changes in maternal and fetal liver and kidneys and, in higher than therapeutic doses, might be toxic to those animals.

Use of coupling agents to enhance the interfacial interactions in starch-EVOH/hydroxylapatite composites.

Different zirconate, titanate and silane coupling agents were selected in an effort to improve the mechanical properties of starch and ethylene-vinyl alcohol copolymer (EVOH) hydroxylapatite (HA) composites, through the enhancement of the filler particles-polymer matrix interactions and the promotion of the interfacial adhesion between these two phases. The mechanical performance was assessed by tensile tests and discussed on the basis of the respective interfacial morphology (evaluated by scanning electron microscopy). The main relevant parameters were found to be the surface properties and reactivity of the filler (non-sintered HA) and the chemical nature (pH and type of metallic centre) of the added coupling agent. Significant improvements in the stiffness were achieved (about 30% increase in the modulus) when using the acidic zirconate coupling agents. The acidic zirconate combined the capability of crosslinking the polymer matrix with the establishment of donor-acceptor interactions and hydrogen bonding between it and the ceramic particles, leading to very good interfacial adhesion. The optimization of these coupling processes associated with the introduction of higher amounts of filler, may be an effective way to produce composites with mechanical properties analogous to those of the human cortical bone.

A new approach based on injection moulding to produce biodegradable starch-based polymeric scaffolds: morphology, mechanical and degradation behaviour.

One of the present challenges in polymer scaffold processing is the fabrication of three-dimensional (3D) architectures with an adequate mechanical performance to be used in the tissue engineering of hard tissues. This paper describes a preliminary study on the development of a new method to produce biodegradable scaffolds from a range of corn-starch-based polymers. In some cases, hydroxlapatite was also used as a reinforcement of the biodegradable polymers. The developed methodology consists of a standard conventional injection moulding process, on which a solid blowing agent based on carboxylic acids is used to generate the foaming of the bulk of the moulded part. The proposed route allows for the production of scaffolds with a compact skin and a porous core, with promising mechanical properties. By using the developed method it is possible to manufacture biodegradable polymer scaffolds in an easy (melt-based processing) and reproducible manner. The scaffolds can be moulded into complex shapes, and the blowing additives do not affect the non-cytotoxic behaviour of the starch-based materials. The materials produced using this method were evaluated with respect to the morphology of the porous structure, and the respective mechanical properties and degradation behaviour. It was demonstrated that it is possible to obtain, by a standard melt based processing route, 3D scaffolds with complex shapes that exhibit an appropriate morphology, without decreasing significantly the mechanical properties of the materials. It is believed that the optimisation of the proposed processing methodology may lead to the production of scaffolds that might be used on the regeneration of load-bearing tissues.

Cytocompatibility and response of osteoblastic-like cells to starch-based polymers: effect of several additives and processing conditions.

This work reports on the biocompatibility evaluation of new biodegradable starch-based polymers that are under consideration for use in orthopaedic temporary applications and as tissue engineering scaffolds. It has been shown in previous works that by using these polymers it is both possible to produce polymer/hydroxyapatite (HA) composites (with or without the use of coupling agents) with mechanical properties matching those of the human bone, and to obtain 3D structures generated by solid blowing agents, that are suitable for tissue engineering applications. This study was focused on establishing the influence of several additives (ceramic fillers, blowing agents and coupling agents) and processing methods/conditions on the biocompatibility of the materials described above. The cytotoxicity of the materials was evaluated using cell culture methods, according to ISO/EN 109935 guidelines. A cell suspension of human osteosarcoma cells (HOS) was also seeded on a blend of corn starch with ethylene vinyl alcohol (SEVA-C) and on SEVA-C/HA composites, in order to have a preliminary indication on cell adhesion and proliferation on the materials surface. In general, the obtained results show that all the different materials based on SEVA-C, (which are being investigated for use in several biomedical applications), as well as all the additives (including the novel coupling agents) and different processing methods required to obtain the different properties/products, can be used without inducing a cytotoxic behaviour to the developed biomaterials.

Biocompatibility testing of novel starch-based materials with potential application in orthopaedic surgery: a preliminary study.

This paper describes an extensive biocompatibility evaluation of biodegradable starch-based materials aimed at orthopaedic applications as temporary bone replacement/fixation implants. For that purpose, a polymer (starch/ethylene vinyl alcohol blend, SEVA-C) and a composite of SEVA-C reinforced with hydroxyapatite (HA) particles, were evaluated in both in vitro and in vivo assays. For the in vitro analysis cell culture methods were used. The in vivo tissue reactions were evaluated in an intramuscular and intracortical bone implantation model on goats, using light and scanning electron microscopy. A computerized image analysis system was used to obtain histomorphometric data regarding bone contact and remodelling after 6 and 12 weeks of implantation. In both in vitro and in vivo models, the SEVA-C-based materials did not induce adverse reactions, which in addition to their bone-matching mechanical properties makes them promising materials for bone replacement fixation.

Casein and soybean protein-based thermoplastics and composites as alternative biodegradable polymers for biomedical applications.

This work reports on the development and characterization of novel meltable polymers and composites based on casein and soybean proteins. The effects of inert (Al(2)O(3)) and bioactive (tricalcium phosphate) ceramic reinforcements over the mechanical performance, water absorption, and bioactivity behavior of the injection-molded thermoplastics were examined. It was possible to obtain materials and composites with a range of mechanical properties, which might allow for their application in the biomedical field. The incorporation of tricalcium phosphate into the soybean thermoplastic decreased its mechanical properties but lead to the nucleation of a bioactive calcium-phosphate film on their surface when immersed in a simulated body fluid solution. When compounded with 1% of a zirconate coupling agent, the nucleation and growth of the bioactive films on the surface of the referred to composites was accelerated. The materials degradation was studied for ageing periods up to 60 days in an isotonic saline solution. Both water uptake and weight loss were monitored as a function of the immersion time. After 1 month of immersion, the materials showed signal of chemical degradation, presenting weight losses up to 30%. However, further improvement on the mechanical performance and the enhancement of the hydrolytic stability of those materials will be highly necessary for applications in the biomedical field.

Verminous aneurysm caused by filaria.

Aneurysms caused by atherosclerosis are relatively frequent, as a consequence of the high incidence of this degenerative disease of the arteries. Other types of aneurysm, for example, those of infectious etiology, are more uncommon. Bacterias and fungi are able to cause aneurysms in several parts of the arterial tree. Stengel et al (1943), in a review of world literature described 217 cases of mycotic aneurysms. The Stedman's Medical Dictionary refers to a special type of aneurysm observed in horses, caused by intra-vascular migration of a worm, the Strongylus vulgaris. It has been named verminous aneurysm and generally involves the mesenteric arteries. We haven't found in medical literature any similar observations refering to human cases. The purpose of this paper is to describe a case of aneurysm the etiology of which we have imputed to the filaria (Wuchereria bancrofti). This case was observed in Marcilio Dias Naval Hospital, Rio de Janeiro, Brazil.

Hypoglycemic activity of dried extracts of Bauhinia forficata Link.

Leaves of the pantropical genus Bauhinia (Fabaceae) are known popularly as cow's foot, due to their unique characteristic bilobed aspect. The species Bauhinia forficata (Brazilian Orchid-tree) is widely used in folk medicine as an antidiabetic. The present work investigates the hypoglycemic activity of the dried extracts of Bauhinia forficata leaves in vivo, as well as the influence of the drying and granulation processes on this activity. The fluid extract was dried to generate oven-dried (ODE), spray-dried (SDE) and wet granulation (WGE) extracts, with the aid of colloidal silicon dioxide and/or cellulose:lactose mixture. The dried extracts were characterized by spectrophotometric, chromatographic and photo microscopy image analysis. 200 mg/kg body wt., p.o. of each dried product were administered orally to male Wistar rats over 7 days old, for biomonitoring of the hypoglycemic activity profile. The effect of the extracts was studied in STZ-induced diabetic rats. After 7 days of treatment, fasting glucose was determined, and the livers were removed, dried on tissue paper, weighed, and stored at -20 degrees C to estimate hepatic glycogen. Our results show that spray-drying or oven-drying processes applied to B. forficata extracts did not significantly alter its flavonoid profile or its hypoglycemic activity. Indeed, the dried extracts of B. forficata act differently from glibenclamide. Despite the lower active content in WGE, because of the higher concentration of adjuvants, the use of the granulation process improved the manufacturing properties of the ODE, making this material more appropriate for use in tablets or capsules.

Increasing seroprevalence of human herpesvirus 8 (HHV-8) with age confirms HHV-8 endemicity in Amazon Amerindians from Brazil.

Human herpesvirus 8 (HHV-8) seroprevalences were determined in two isolated Amazon Amerindian tribes, according to age, gender and familial aggregation. Plasma and serum samples obtained from 982 Amazon Amerindians (664 Tiriyó and 318 Waiampi) were tested for antibodies against lytic and latent HHV-8 antigens by using 'in-house' immunofluorescence assays. Overall, HHV-8 seroprevalence was 56.8 % (57.4 % in the Tiriyó tribe and 55.7 % in the Waiampi tribe). Seroprevalence was independent of gender and increased linearly with age: it was 35.0 % among children aged 2-9 years, 51.4 % in adolescents (10-19 years), 72.9 % in adults and 82.3 % in adults aged >50 years. Interestingly, 44.4 % of children under 2 years of age were HHV-8-seropositive. No significant differences in seroprevalence between tribes and age groups were detected. It is concluded that HHV-8 is hyperendemic in Brazilian Amazon Amerindians, with vertical and horizontal transmission during childhood, familial transmission and sexual contact in adulthood contributing to this high prevalence in these isolated populations.

Coupling of HDPE/hydroxyapatite composites by silane-based methodologies.

Several coupling treatments based on silane chemicals were investigated for the development of high density (HDPE)/hydroxyapatite (HA) composites. Two HA powders, sintered HA (HAs) and non sintered HA (HAns), were studied in combination with five silanes, namely y-methacryloxy propyltrimethoxy silane (MEMO), 3-(2-aminoethyl)aminopropyltrimethoxy silane (DAMO), vinyltrimethoxy silane (VTMO), 3-aminopropyltriethoxy silane (AMEO) and trimethoxypropyl silane (PTMO). The HA particles were treated by a dipping in method or by spraying with silane solutions. After drying, the treated powders were compounded with HDPE or HDPE with acrylic acid and/or organic peroxide and subsequently compression molded. The tensile test specimens obtained from the molded plates were tensile tested and their fracture surfaces were observed by scanning electron microscopy (SEM). For the sintered HA (HAs) composites, the most effective coupling treatments concerning stiffness are those based on MEMO and AMEO. The low influence of these coupling procedures on strength is believed to be associated to the low volume fraction and the relatively smooth surface of the used HA particles. For the non-sintered HA (HAns) composites, it was possible to improve significantly both the stiffness and the strength. Amino silanes demonstrated to be highly efficient concerning strength enhancement. The higher effectiveness of the coupling treatments for HAns filled composites is attributed to their higher particle surface area, smaller particle size distribution and expected higher chemical reactivity. For both cases, the improvement in mechanical performance after the coupling treatment is consistent with the enhancement in interfacial adhesion observed by SEM.

New starch-based thermoplastic hydrogels for use as bone cements or drug-delivery carriers.

The development of new biodegradable hydrogels, based on corn starch/cellulose acetate blends, produced by free-radical polymerization with methyl methacrylate monomer (MMA) and/or an acrylic acid monomer (AA), is reported. The polymerization was initiated by a redox system consisting of a benzoyl peroxide and 4-dimethlyaminobenzyl alcohol at low temperature. These hydrogels may constitute an alternative to the materials currently used as bone cements or drug-delivery carriers. Swelling studies were carried out, as a function of pH and temperature, in buffered solutions. The xerogels were further characterized by Fourier transform-infrared spectroscopy. Tensile and compression tests, and dynamic mechanical thermal analysis were used to assess the mechanical performance of the developed materials. The fracture surfaces were observed by scanning electron microscopy. The developed materials are sensitive to the pH, showing a clear reversible transition in a relatively narrow interval of pH, which is just in the range of physiological conditions. These properties make the materials developed in this study very promising for biomedical applications. Fickian-type diffusion is the mechanism predominant in these systems, except for the composition with a higher concentration of AA, that corresponds to the most desirable kinetical behavior for controlled release (case II-transport mechanism). Furthermore, the results obtained in the mechanical tests are in the range of those reported for typical PMMA bone cements, showing that it is possible to develop partially degradable cements with an adequate mechanical behavior.

FK 506 associated disorders in liver transplantation.

Immunosuppressive regimens are usually required for patients receiving organ transplants. The development of a post-transplant lymphoproliferative disorder is an infrequent complication of such therapy. FK 506 is a new immunosuppressant agent that has recently been used in patients receiving organ transplantation. This report describes a 20 month old Saudi child who developed post-transplant lymphoproliferative disorder while receiving FK 506 following liver transplantation. Such a complication has been recognized with cyclosporine but has not been well addressed as yet with FK 506. The child also developed progressive renal complications. There was also a difficulty in interpreting the results for IgM antibodies to different viruses. The overall features of progressive renal toxicity and those of lymphadenopathy, hepatosplenomegaly, fever, neutropenia and thrombocytopenia reversed following discontinuation of FK 506 therapy. It is concluded that all the above complications, though reversible, may well be linked to the new immunosuppressant agent FK 506.

Treatments to induce the nucleation and growth of apatite-like layers on polymeric surfaces and foams.

In this work, a bioactive glass is used as a percusor of calcium-phosphate (Ca-P) film deposition onto several polymer-based materials. Both bioinert (high molecular weight polyethylene, HMWPE), and biodegradable (corn starch-based blends, SEVA-C) polymers, unreinforced or reinforced with hydroxylapatite (HA), were coated by the very simple proposed route. Also polyurethane (PU) foams, with an open-cell structure, were mineralized by the proposed method. In fact, it was possible to induce the growth of the Ca-P films not only at the surface, but also in the bulk of the PU foam. These cellular materials are intended for cancellous bone replacement applications. The morphology of the formed films was strongly dependent on the used substrate, its polar character, and on the presence of HA in its composition, as observed by SEM. Nevertheless, a well defined needly like structure was observed in all samples at high magnifications. The Ca:P ratios of the films were between 1.5 and 1.7, i.e. in the range of tricalcium phosphate-hydroxylapatite. Raman spectroscopy and thin-film x-ray diffraction (XRD) evidenced the formation of mostly amorphous calcium-phosphate films. After scraping the coating from the polymer surface and heat-treating the resulting powder at 1000 degrees C for 1 h, HA and beta-tricalcium phosphate (TCP) typical peaks were found on XRD patterns.

Bi-composite sandwich moldings: processing, mechanical performance and bioactive behavior.

Two composite systems composed of high-density polyethylene (HDPE) filled with hydroxyapatite (HA) and carbon fiber (C fiber) were compounded in a co-rotating twin screw extruder and subsequently molded in a two component injection molding machine in order to produce test bars with a sandwich-like morphology. These moldings are based on a HDPE/HA composite outer layer and a HDPE/C fiber composite core. The mechanical performance of the obtained specimens was assessed by tensile and impact testing. The fracture surfaces were observed by scanning electron microscopy (SEM) and optical reflectance microscopy was used to characterize the morphology within the moldings. In order to study the bioactivity of the molded specimens, the samples were immersed for different periods of time up to 30 days in a simulated-body fluid (SBF) with an ion composition similar to human blood plasma. After each immersion period, the surfaces of the specimens were characterized by SEM. The chemical composition and the structure of the deposited films were studied by electron dispersive spectroscopy (EDS) and thin-film X-ray diffraction (TF-XRD). The evolution of the elemental concentrations in the SBF solution was determined by induced coupled plasma emission (ICP) spectroscopy. Bi-composite moldings featuring a sandwich-like morphology were successfully produced. These moldings present a high stiffness as a result of the C fiber reinforcement present in the molding core. Furthermore, as a result of the HA loading, the sandwich moldings exhibit a clear in vitro bioactive behavior under simulated physiological conditions, which indicates that an in vivo bone-bonding behavior can be expected for these materials.