RESUMO
The DIAD beamline for Dual Imaging and Diffraction at Diamond Light Source has opted to use an industrial robot to position its Dectris Pilatus 2M CdTe diffraction detector. This setup was chosen to enable flexible positioning of the detector in a quarter-sphere around the sample position whilst reliably holding the large weight of 139â kg of detector, detector mount and cabling in a stable position. Metrology measurements showed that the detector can be positioned with a linear repeatability of <19.7â µm and a rotational repeatability of <16.3â µrad. The detector position stays stable for a 12â h period with <10.1â µm of movement for linear displacement and <3.8â µrad for rotational displacement. X-ray diffraction from calibration samples confirmed that the robot is sufficiently stable to resolve lattice d-spacings within the instrumental broadening given by detector position and beam divergence.
RESUMO
The Dual Imaging and Diffraction (DIAD) beamline at Diamond Light Source is a new dual-beam instrument for full-field imaging/tomography and powder diffraction. This instrument provides the user community with the capability to dynamically image 2D and 3D complex structures and perform phase identification and/or strain mapping using micro-diffraction. The aim is to enable inâ situ and in operando experiments that require spatially correlated results from both techniques, by providing measurements from the same specimen location quasi-simultaneously. Using an unusual optical layout, DIAD has two independent beams originating from one source that operate in the medium energy range (7-38â keV) and are combined at one sample position. Here, either radiography or tomography can be performed using monochromatic or pink beam, with a 1.4â mm × 1.2â mm field of view and a feature resolution of 1.2â µm. Micro-diffraction is possible with a variable beam size between 13â µm × 4â µm and 50â µm × 50â µm. One key functionality of the beamline is image-guided diffraction, a setup in which the micro-diffraction beam can be scanned over the complete area of the imaging field-of-view. This moving beam setup enables the collection of location-specific information about the phase composition and/or strains at any given position within the image/tomography field of view. The dual beam design allows fast switching between imaging and diffraction mode without the need of complicated and time-consuming mode switches. Real-time selection of areas of interest for diffraction measurements as well as the simultaneous collection of both imaging and diffraction data of (irreversible) in situ and in operando experiments are possible.
RESUMO
Liposomes of specific artificial phospholipids, such as Pad-PC-Pad and Rad-PC-Rad, are mechanically responsive. They can release encapsulated therapeutics via physical stimuli, as naturally present in blood flow of constricted vessel segments. The question is how these synthetic liposomes change their structure in the medically relevant temperature range from 22 to 42 °C. In the present study, small-angle neutron scattering (SANS) was employed to evaluate the temperature-induced structural changes of selected artificial liposomes. For Rad-PC-Rad, Pad-Pad-PC, Sur-PC-Sur, and Sad-PC-Sad liposomes, the SANS data have remained constant because the phase transition temperatures are above 42 °C. For Pad-PC-Pad and Pes-PC-Pes liposomes, whose phase transitions are below 42 °C, the q-plots have revealed temperature-dependent structural changes. The average diameter of Pad-PC-Pad liposomes remained almost constant, whereas the eccentricity decreased by an order of magnitude. Related measurements using transmission electron microscopy at cryogenic temperatures, as well as dynamic light scattering before and after the heating cycles, underpin the fact that the non-spherical liposomes flatten out. The SANS data further indicated that, as a consequence of the thermal loop, the mean bilayer thickness increased by 20%, associated with the loss of lipid membrane interdigitation. Therefore, Pad-PC-Pad liposomes are unsuitable for local drug delivery in the atherosclerotic human blood vessel system. In contrast, Rad-PC-Rad liposomes are thermally stable for applications within the human body.
Assuntos
Temperatura Alta , Lipossomos/química , Difração de Nêutrons , Fosfolipídeos/química , Espalhamento a Baixo ÂnguloRESUMO
Facet joint osteoarthritis is a prominent feature of degenerative spine disorders, highly prevalent in ageing populations, and considered a major cause for chronic lower back pain. Since there is no targeted pharmacological therapy, clinical management of disease includes analgesic or surgical treatment. The specific cellular, molecular, and structural changes underpinning facet joint osteoarthritis remain largely elusive. The aim of this study was to determine osteoarthritis-related structural alterations in cortical and trabecular subchondral bone compartments. To this end, we conducted comparative micro computed tomography analysis in healthy (n = 15) and osteoarthritic (n = 22) lumbar facet joints. In osteoarthritic joints, subchondral cortical plate thickness and porosity were significantly reduced. The trabecular compartment displayed a 42 percent increase in bone volume fraction due to an increase in trabecular number, but not trabecular thickness. Bone structural alterations were associated with radiological osteoarthritis severity, mildly age-dependent but not gender-dependent. There was a lack of association between structural parameters of cortical and trabecular compartments in healthy and osteoarthritic specimens. The specific structural alterations suggest elevated subchondral bone resorption and turnover as a potential treatment target in facet joint osteoarthritis.
Assuntos
Reabsorção Óssea , Vértebras Lombares/diagnóstico por imagem , Osteoartrite/diagnóstico por imagem , Articulação Zigapofisária/diagnóstico por imagem , Adulto , Idoso , Idoso de 80 Anos ou mais , Osso Esponjoso/diagnóstico por imagem , Osso Esponjoso/patologia , Osso Cortical/diagnóstico por imagem , Osso Cortical/patologia , Feminino , Humanos , Vértebras Lombares/patologia , Masculino , Pessoa de Meia-Idade , Osteoartrite/patologia , Microtomografia por Raio-X , Articulação Zigapofisária/patologiaRESUMO
Histological examination achieves sub-micrometer resolution laterally. In the third dimension, however, resolution is limited to section thickness. In addition, histological sectioning and mounting sections on glass slides introduce tissue-dependent stress and strain. In contrast, state-of-the-art hard X-ray micro computed tomography (µCT) systems provide isotropic sub-micrometer resolution and avoid sectioning artefacts. The drawback of µCT in the absorption contrast mode for visualising physically soft tissue is a low attenuation difference between anatomical features. In this communication, we demonstrate that formalin-fixed paraffin-embedded human cerebellum yields appropriate absorption contrast in laboratory-based µCT data, comparable to conventional histological sections. Purkinje cells, for example, are readily visible. In order to investigate the pros and cons of complementary approaches, two- and three-dimensional data were manually and automatically registered. The joint histogram of histology and the related µCT slice allows for a detailed discussion on how to integrate two-dimensional information from histology into a three-dimensional tomography dataset. This methodology is not only rewarding for the analysis of the human cerebellum, but it also has relevance for investigations of tissue biopsies and post-mortem applications. Our data indicate that laboratory-based µCT as a modality can fill the gap between synchrotron radiation-based µCT and histology for a variety of tissues. As the information from haematoxylin and eosin (H&E) stained sections and µCT data is related, one can colourise local X-ray absorption values according to the H&E stain. Hence, µCT data can correlate and virtually extend two-dimensional (2D) histology data into the third dimension.
Assuntos
Encéfalo/diagnóstico por imagem , Encéfalo/patologia , Técnicas de Preparação Histocitológica/métodos , Imageamento Tridimensional/métodos , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Microtomografia por Raio-X/métodos , Idoso , Algoritmos , Cadáver , Humanos , Masculino , Intensificação de Imagem Radiográfica/métodos , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Low-voltage dielectric actuators (DEAs) can be fabricated using submicrometer-thin polydimethylsiloxane (PDMS) films. The two established techniques, namely spin coating and molecular beam deposition, however, are inappropriate to produce multistack DEAs in an efficient way. Therefore, we propose an alternative deposition technique, i.e., the alternating current electrospray deposition (ACESD) of 5 vol % PDMS in ethyl acetate solution and subsequent ultraviolet light curing. Atomic force microscopy makes possible the three-dimensional analysis of cured droplet-like islands. These circular islands, prepared on 2 in. Si(100) wafers from four polymers with molecular masses between 800 and 62,700 g/mol, reveal a characteristic morphology with an increasing height-to-diameter ratio. Using the 6000 g/mol polymer for ACESD, the film morphology evolution was tracked by applying conventional optical microscopy and spectroscopic ellipsometry. When the deposition was terminated after 13 s, circular islands with a mean height of 30 nm were found, while terminating the deposition after about 155 s led to a confluent layer with a mean height of 91 ± 10 nm. Potential electrostatic interactions between the droplets could not be identified through the analysis of spatial island distribution. Nevertheless, ACESD is a budget-priced and competitive deposition technique that can be employed to fabricate submicrometer-thin PDMS films with true nanometer roughness.
RESUMO
The Dual Imaging and Diffraction (DIAD) beamline at Diamond Light Source (Didcot, U.K.) implements a correlative approach to the dynamic study of materials based on concurrent analysis of identical sample locations using complementary X-ray modalities to reveal structural detail at various length scales. Namely, the underlying beamline principle and its practical implementation allow the collocation of chosen regions within the sample and their interrogation using real-space imaging (radiography and tomography) and reciprocal space scattering (diffraction). The switching between the two principal modes is made smooth and rapid by design, so that the data collected is interlaced to obtain near-simultaneous multimodal characterization. Different specific photon energies are used for each mode, and the interlacing of acquisition steps allows conducting static and dynamic experiments. Building on the demonstrated realization of this state-of-the-art approach requires further refining of the experimental practice, namely, the methods for gauge volume collocation under different modes of beam-sample interaction. To address this challenge, experiments were conducted at DIAD devoted to the study of human dental enamel, a hierarchical structure composed of hydroxyapatite mineral nanocrystals, as a static sample previously affected by dental caries (tooth decay) as well as under dynamic conditions simulating the process of acid demineralization. Collocation and correlation were achieved between WAXS (wide-angle X-ray scattering), 2D (radiographic), and 3D (tomographic) imaging. While X-ray imaging in 2D or 3D modes reveals real-space details of the sample microstructure, X-ray scattering data for each gauge volume provided statistical nanoscale and ultrastructural polycrystal reciprocal-space information such as phase and preferred orientation (texture). Careful registration of the gauge volume positions recorded during the scans allowed direct covisualization of the data from two modalities. Diffraction gauge volumes were identified and visualized within the tomographic data sets, revealing the underlying local information to support the interpretation of the diffraction patterns. The present implementation of the 4D microscopy paradigm allowed following the progression of demineralization and its correlation with time-dependent WAXS pattern evolution in an approach that is transferable to other material systems.
RESUMO
OBJECTIVE: The objective of this study was to evaluate the geometric pattern and the intensity of artifacts around titanium implants in cone beam computed tomography (CBCT) using an in vitro model. MATERIAL AND METHODS: Ten test models, each containing one 4.1-mm-diameter titanium implant, were cast from a human mandible using silicone impression material and dental stone. Each model contained an implant in one of the following single-tooth gaps: 37, 36, 34, 33, 31, 41, 43, 44, 46, and 47. For control purposes, three models without implants were produced. Each model was scanned five times using a CBCT scanner. Gray values (GV) were recorded at eight circumferential positions around the implants at 0.5 mm, 1 mm, and 2 mm from the implant surface (GVTest ). GV were measured in the corresponding volumes of interest (VOI) in the models without implants (GVControl ). Differences of gray values (ΔGV) between GVTest and GVControl were calculated as percentages. To detect differences between GVTest and GVControl , the 95% confidence interval (CI) was computed for the values of ΔGV. Repeated measures ANOVA was used for the comparison of ΔGV at 0.5 mm, 1 mm, and 2 mm from the implant surface. RESULTS: Artifacts reflected by altered GV were always present in the proximity of titanium implants, regardless of the implant position. When comparing GVTest and GVControl , increased GV were found at the buccal and lingual aspects of the implant sites, whereas regions with reduced GV were located along the long axis of the mandibular body of the test models. A significant decrease in artifact intensity was found with increasing distance from the buccal implant surface (ΔGV0.5 mm : 45 ± 10% [SD], ΔGV1 mm : 28 ± 14% [SD], ΔGV2 mm : 14 ± 7% [SD]) (P < 0.001). CONCLUSION: Artifacts around titanium implants in CBCT images were distributed according to a geometrical pattern.
Assuntos
Artefatos , Tomografia Computadorizada de Feixe Cônico , Implantes Dentários , Titânio , Humanos , Técnicas In Vitro , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Imagens de FantasmasRESUMO
PURPOSE: Certain regions of the talar trochlea are recognized as exhibiting varying cartilage thickness and degrees of subchondral bone mineralization. These changes have been attributed to the long-term loading history. For the current study, we accepted the hypothesis that stress-induced alterations of the joint surface include not only varying degrees of subchondral lamellar mineralization, but also structural changes of the subarticular cancellous bone. METHODS: In order to examine the structure of the subarticular cancellous bone, ten formalin-fixed talar trochleae were analyzed using micro CT. Sixteen measurement zones were defined and then evaluated in five layers each of 1-mm thickness, enabling assessment of the cancellous architecture extending 5 mm below the trochlear surface using numerical and structural parameters. RESULTS: As with mineralization patterns in the subchondral lamella, large variation was observed regarding bone volume, trabecular quantity, thickness, and spacing, as well as for structure model index and degree of anisotropy, depending on localization. In addition, like previous reports examining mineralization of the subchondral lamella, two distinct groups could be identified as "bicentric" or "monocentric". CONCLUSIONS: These results show that structural tissue adaptation probably due to loading history is also evident within the subarticular cancellous bone.
Assuntos
Tálus/diagnóstico por imagem , Adaptação Fisiológica , Idoso , Idoso de 80 Anos ou mais , Anisotropia , Feminino , Humanos , Masculino , Tálus/fisiologia , Suporte de Carga , Microtomografia por Raio-XRESUMO
Spatially resolved small-angle x-ray scattering based on synchrotron radiation combines the quantitative assessment of nanometer-sized components using scattering with the real-space imaging by means of scanning. The method enables us to study the effect of caries-induced damages on the inorganic and organic nanoscopic components in human teeth. We demonstrate for several 200- to 500-µm-thin tooth slices that the bacterial processes dissolve the ceramic components in enamel and dentin, but the dentinal collagen network remains practically unaffected with respect to its abundance and orientation in early stages of caries and in parts of extended carious lesions. Consequently, we speculate that future caries treatments can be developed reversing the effect of bacterial attacks by means of suitable remineralization of the dentin. FROM THE CLINICAL EDITOR: In this groundbreaking study of caries pathology using synchrotron-based X-ray scattering, the authors demonstrated that while bacterial processes do dissolve the ceramic components in enamel and dentin; however, the dentinal collagen network remains unaffected, enabling the development of future caries treatments that re-mineralize the dentin.
Assuntos
Cárie Dentária/patologia , Espalhamento a Baixo Ângulo , Dente/patologia , Dente/ultraestrutura , Difração de Raios X/métodos , Colágeno/ultraestrutura , Cárie Dentária/microbiologia , Esmalte Dentário/microbiologia , Esmalte Dentário/patologia , Esmalte Dentário/ultraestrutura , Dentina/microbiologia , Dentina/patologia , Dentina/ultraestrutura , Humanos , Síncrotrons , Dente/microbiologiaRESUMO
Purpose: In dental offices, there is a trend replacing conventional silicone impressions and plaster cast models by imaging data of intraoral scanners to map the denture and surrounding tissues. The aim of the study is the analysis of the accuracy of selected commercially available scanners. The accuracy is considered as the main drawback in comparison to the conventional approach. Approach: We evaluated the reproduction performance of five optical scanners by a direct comparison with high-resolution hard x-ray computed tomography data, all obtained from a polyetheretherketone model with similarity to a full-arch upper jaw. Results: Using the software GOM Inspect (GOM GmbH, Braunschweig, Germany), we could classify the intraoral scanners into two groups. The more accurate instruments gave rise to the following precision values: 35 µ m (TRIOS® 3, 3shape, Copenhagen, Denmark), 43 µ m (CS 3600, Carestream, Atlanta, Georgia), and 46 µ m (3M™ True Definition Scanner, 3M ESPE, St. Paul, Minnesota). The less precise systems yielded 93 µ m (Medit i500, Medit corp., Seongbuk-gu, South Korea) and 97 µ m (Emerald™, Planmeca Oy, Helsinki, Finland). Conclusions: The selected scanners are suitable for single crowns, small bridges, and separate quadrants prostheses. Scanners based on triangulation are hardly appropriate for full-arch prostheses. Besides precision, however, the choice of the scanner depends on scanning time, intraoral-camera size, and the user's learning curve. The developed protocol, which includes three-dimensional (3D) imaging and advanced computational tools for the registration with the design data, will be increasingly used in geometrical metrology by nondestructive procedures to perform dimensional measurements with micrometer precision and is capable for detailed 3D geometrical models reconstruction.
RESUMO
Sphincters to guarantee continence are in principal the simplest muscles, because only two states (closed and open) seem to be important. The healthy urinary sphincter, however, provides dynamic components. During the filling phase the increase in tonus prevents urinary loss. The sphincter rapidly responds to pressure pulses caused, for example, by coughing. Contemporary artificial sphincters, however, merely generate two states and often induce atrophy and erosion. Hence the success of commercially available, continually improved implants is still limited. This communication reviews two physical principles, shape memory alloys and electrically activated polymer nanostructures, for applications in artificial sphincters which adapt the pressure acting on the urethra and react to stress situations such as coughing. The application of these principles allows intermittent reduction of pressure on the urethra, thus involving significantly less atrophy. The fabrication of reliably working nanostructures, however, is ambitious and will need time-consuming, high-level engineering.
Assuntos
Nanotecnologia , Incontinência Urinária/terapia , Esfíncter Urinário Artificial , Ligas , Desenho de Equipamento , Humanos , PolímerosRESUMO
Atherosclerosis gives rise to blood vessel occlusion associated with blood flow alteration and substantial increase of average wall shear stress. This modification was proved acting as a purely physical trigger for targeted vasodilator release from a particular type of liposomes composed of 1,3-diaminophospholipids (Pad-PC-Pad). The flow-induced structural changes of these faceted liposomes, however, are completely unknown. Therefore, spatially resolved small-angle X-ray scattering was combined with microfluidics to uniquely study the purely physical mechanisms, which give rise to the highly efficient drug release from mechanoresponsive liposomes of nanometer size. The microfluidic device, designed to mimic a stenotic blood vessel, consisted of a 1-mm-wide channel with a constriction, 125 âµm in diameter. Here, the changes of the average bilayer thickness and the mean size of the mechanoresponsive liposomes have been locally detected under flow conditions. Overall shape and bilayer thickness do change already near the constriction inlet, but the alteration is dominant near the outlet. At a flow rate of 0.2 âµL/s, the liposome's bilayer thickness increased by 30 % compared to the situation well before the constriction and under static condition. The detected bilayer thickness increase of the faceted liposomes is in line with the mechanically induced loss of interdigitation between the phospholipid amide chains. These results imply that rather the gradient force than the wall shear stress provokes structural changes of Pad-PC-Pad liposomes and the related drug release at stenoses. The approach, i.e. the combination of microfluidics and spatially resolved small-angle X-ray scattering, paves the way to design highly efficient and specific systems for the targeted drug delivery at constrictions with predefined morphology.
RESUMO
Atherosclerotic arteries exhibit characteristic constrictions and substantial deviations from cylindrical shape. Therefore, determining the artery's cross-section along the centerline is challenging, although high-resolution isotropic three-dimensional data are available. Herein, we apply high-resolution computed tomography in absorption and phase to a plaque-containing human artery post-mortem, through the course of the preparation stages for histology. We identify the impact of paraffin embedding and decalcification on the artery lumen. For automatic extraction of lumen's cross-section along centerline we present a dedicated pipeline. Comparing fixated tissue before and after paraffin embedding gives rise to shape changes with lumen reduction to 50-80%. The histological slicing induces further deformations with respect to tomography. Data acquired after decalcification show debris unintentionally distributed within the vessel preventing the reliable automatic lumen segmentation. Comparing tomography of laboratory- and synchrotron-radiation-based X rays by means of joint histogram analysis leads us to conclude that advanced desktop tomography is capable of quantifying the artery's lumen as an essential input for blood flow simulations. The results indicate that the most reliable lumen quantification is achieved by imaging the non-decalcified specimen fixed in formalin, using phase contrast modality and a dedicated processing pipeline. This study focusses on a methodology to quantitatively evaluate diseased artery segments post-mortem and provides unique structural parameters on the treatment-induced local shrinkage, which will be the basis of future studies on the flow in vessels affected by constrictions.
Assuntos
Vasos Coronários/diagnóstico por imagem , Imageamento Tridimensional , Placa Aterosclerótica/patologia , Tomografia Computadorizada por Raios X , Vasos Coronários/patologia , Humanos , Inclusão em ParafinaRESUMO
There have been great efforts on the nanoscale 3D probing of brain tissues to image subcellular morphologies. However, limitations in terms of tissue coverage, anisotropic resolution, stain dependence, and complex sample preparation all hinder achieving a better understanding of the human brain functioning in the subcellular context. Herein, X-ray nanoholotomography is introduced as an emerging synchrotron radiation-based technology for large-scale, label-free, direct imaging with isotropic voxel sizes down to 25 nm, exhibiting a spatial resolution down to 88 nm. The procedure is nondestructive as it does not require physical slicing. Hence, it allows subsequent imaging by complementary techniques, including histology. The feasibility of this 3D imaging approach is demonstrated on human cerebellum and neocortex specimens derived from paraffin-embedded tissue blocks. The obtained results are compared to hematoxylin and eosin stained histological sections and showcase the ability for rapid hierarchical neuroimaging and automatic rebuilding of the neuronal architecture at the level of a single cell nucleolus. The findings indicate that nanoholotomography can complement microscopy not only by large isotropic volumetric data but also by morphological details on the sub-100 nm level, addressing many of the present challenges in brain tissue characterization and probably becoming an important tool in nanoanatomy.
RESUMO
Following the principles of "morphology reveals biomechanics," the cartilage-osseous interface and the trabecular network show defined adaptation in response to physiological loading. In the case of a compromised relationship, the ability to support the load diminishes and the onset of osteoarthritis (OA) may arise. To describe and quantify the changes within the subchondral bone plate (SBP) and trabecular architecture, 10 human OA patellae were investigated by CT and micro-CT. The results are presented in comparison to a previously published dataset of 10 non-OA patellae which were evaluated in the same manner. The analyzed OA samples showed no distinctive mineralization pattern in regards to the physiological biomechanics, but a highly irregular disseminated distribution. In addition, no regularity in bone distribution and architecture across the trabecular network was found. We observed a decrease of material as the bone volume and trabecular thickness/number were significantly reduced. In comparison to non-OA samples, greatest differences for all parameters were found within the first mm of trabecular bone. The differences decreased toward the fifth mm in a logarithmic manner. The interpretation of the logarithmic relation leads to the conclusion that the main impact of OA on bony structures is located beneath the SBP and lessens with depth. In addition to the clear difference in material with approximately 12% less bone volume in the first mm in OA patellae, the architectural arrangement is more rod-like and isotropic, accounting for an architectural decrease in stability and support. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1982-1989, 2017.
Assuntos
Osteoartrite do Joelho/patologia , Patela/patologia , Calcificação Fisiológica , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Osteoartrite do Joelho/diagnóstico por imagem , Patela/diagnóstico por imagem , Microtomografia por Raio-XRESUMO
Micro computed tomography has been combined with dedicated data analysis for the in vitro quantification of sub-surface enamel lesion mineralization. Two artificial white spot lesions, generated on a human molar crown in vitro, were examined. One lesion was treated with a self-assembling peptide intended to trigger nucleation of hydroxyapatite crystals. We non-destructively determined the local X-ray attenuation within the specimens before and after treatment. The three-dimensional data was rigidly registered. Three interpolation methods, i.e., nearest neighbor, tri-linear, and tri-cubic interpolation were evaluated. The mineralization of the affected regions was quantified via joint histogram analysis, i.e., a voxel-by-voxel comparison of the tomography data before and after mineralization. After ten days incubation, the mean mineralization coefficient reached 35.5% for the peptide-treated specimen compared to 11.5% for the control. This pilot study does not give any evidence for the efficacy of peptide treatment nor allows estimating the necessary number of specimens to achieve significance, but shows a sound methodological approach on the basis of the joint histogram analysis.
RESUMO
Carious lesions exhibit a complex structural organization composed of zones of higher and lower mineralization, formed by successive periods of cyclic de- and re-mineralization. A thorough understanding of the lesion morphology is necessary for the development of suitable treatments aiming to repair rather than replace the damaged tissue. This detailed understanding includes the entire lesion down to individual crystallites and nanopores within the natural organization of the crown. A moderate lesion, with surface loss and reaching dentin, and a very early lesion were studied. Scanning small-angle X-ray scattering (SAXS) with a pixel size of 20 × 20 µm(2) was used to characterize these lesions, allowing for the identification of distinct zones with varied absorption and scattering behavior, indicative of varied porosity and pore morphology. Despite these differences, the overall orientation and anisotropy of the SAXS signal was unaltered throughout both lesions, indicating that an anisotropic scaffold is still present in the lesion. The finding that crystallite orientation is preserved throughout the lesions facilitates the identification of preventive re-mineralizing strategies with the potential to recreate the original nanostructure.
Assuntos
Cárie Dentária/patologia , Esmalte Dentário/patologia , Nanoestruturas/química , Cárie Dentária/diagnóstico por imagem , Esmalte Dentário/diagnóstico por imagem , Dentina/metabolismo , Humanos , Espalhamento de Radiação , Propriedades de Superfície , Microtomografia por Raio-X , Raios XRESUMO
A key problem in X-ray computed tomography is choosing photon energies for postmortem specimens containing both soft and hard tissues. Increasing X-ray energy reduces image artifacts from highly absorbing hard tissues including plaque, but it simultaneously decreases contrast in soft tissues including the endothelium. Therefore, identifying the lumen within plaque-containing vessels is challenging. Destructive histology, the gold standard for tissue evaluation, reaches submicron resolution in two dimensions, whereas slice thickness limits spatial resolution in the third. We present a protocol to systematically analyze heterogeneous tissues containing weakly and highly absorbing components in the original wet state, postmortem. Taking the example of atherosclerotic human coronary arteries, the successively acquired 3D data of benchtop and synchrotron radiation-based tomography are validated by histology. The entire protocol requires â¼20 working days, enables differentiation between plaque, muscle and fat tissues without using contrast agents and permits blood flow simulations in vessels with plaque-induced constrictions.
Assuntos
Imageamento Tridimensional/métodos , Tomografia Computadorizada por Raios X/métodos , Vasos Coronários/ultraestrutura , Técnicas Histológicas , Humanos , Placa Aterosclerótica/patologiaRESUMO
Appropriate mechanical stimulation of bony tissue enhances osseointegration of load-bearing implants. Uniaxial compression of porous implants locally results in tensile and compressive strains. Their experimental determination is the objective of this study. Selective laser melting is applied to produce open-porous NiTi scaffolds of cubic units. To measure displacement and strain fields within the compressed scaffold, the authors took advantage of synchrotron radiation-based micro computed tomography during temperature increase and non-rigid three-dimensional data registration. Uniaxial scaffold compression of 6% led to local compressive and tensile strains of up to 15%. The experiments validate modeling by means of the finite element method. Increasing the temperature during the tomography experiment from 15 to 37°C at a rate of 4 K h(-1), one can locally identify the phase transition from martensite to austenite. It starts at ≈ 24°C on the scaffolds bottom, proceeds up towards the top and terminates at ≈ 34°C on the periphery of the scaffold. The results allow not only design optimization of the scaffold architecture, but also estimation of maximal displacements before cracks are initiated and of optimized mechanical stimuli around porous metallic load-bearing implants within the physiological temperature range.