Low-Temperature Cross-Linked Hole Transport Layer for High-Performance Blue Quantum-Dot Light-Emitting Diodes.

Quantum-dot light-emitting diodes (QLEDs), a kind of promising optoelectronic device, demonstrate potential superiority in next-generation display technology. Thermal cross-linked hole transport materials (HTMs) have been employed in solution-processed QLEDs due to their excellent thermal stability and solvent resistance, whereas the unbalanced charge injection and high cross-linking temperature of cross-linked HTMs can inhibit the efficiency of QLEDs and limit their application. Herein, a low-temperature cross-linked HTM of 4,4'-bis(3-(((4-vinylbenzyl)oxy)methyl)-9H-carbazol-9-yl)-1,1'-biphenyl (DV-CBP) with a flexible styrene side chain is introduced, which reduces the cross-linking temperature to 150 °C and enhances the hole mobility up to 1.01 × 10-3 cm2 V-1 s-1. More importantly, the maximum external quantum efficiency of 21.35% is successfully obtained on the basis of the DV-CBP as a cross-linked hole transport layer (HTL) for blue QLEDs. The low-temperature cross-linked high-mobility HTL using flexible side chains could be an excellent alternative for future HTL development.

Ultrafast Self-Propelled Directional Liquid Transport on the Pyramid-Structured Fibers with Concave Curved Surfaces.

Self-propelled directional liquid transport (SDLT) has been observed on many natural substrates, serving as an efficient strategy to utilize surrounding liquids for a better habitat to the local environment. Drawing inspiration, various artificial materials capable of SDLT have been developed. However, the liquid transport velocity is normally very low (ca. 3-30 µm/s), which limits its practical applications. Herein, we developed novel pyramid-structured fibers with concave curved surfaces (P-concave curved-fiber, PCCF), which enable the ultrafast SDLT. Specifically, the liquid transport velocity can be up to ∼28.79 mm/s on a dry tri-PCCF, over 50 times faster than that on the surface of Sarracenia trichome (∼520 µm/s). The velocity is even faster on a wet fiber by two times (∼47.34 mm/s). Here, the Laplace pressure difference (FL) induced by the tapered structure determines the liquid transport direction. It is proposed that both the capillary rises imparted by the concave curved surfaces and the oriented microridges/valleys and the enhanced FL aroused by the reduced cross-sectional area accelerate the SDLT on surfaces of the PCCFs. Consequently, the PCCF takes a different liquid transport strategy with a convex-shaped advancing meniscus, differing from that on traditional conical fibers. Moreover, the as-developed PCCF is also applicable for underwater ultrafast SDLT of oil. We envision that the result will open a new perspective for fabricating a fibrous system for microfluidic and liquid manipulation.

Photothermal Synergic Cross-Linking Hole Transport Layer for Highly Efficient RGB QLEDs.

Developing an insoluble cross-linkable hole transport layer (HTL) plays an important role for solution-processed quantum dots light-emitting diodes (QLEDs) to fabricate a multilayer device with separated quantum dots layers and HTLs. In this work, a facile photothermal synergic cross-linking strategy is simultaneous annealing and UV irradiation to form the high-quality cross-linked film as the HTL without any photoinitiator, which efficiently reduces the cross-linking temperature to the low temperature of 130 °C and enhances the hole mobility of the 3-vinyl-9-{4-[4-(3-vinylcarbazol-9-yl)phenyl]phenyl}carbazole (CBP-V) thin films. The obtained high-quality cross-linked CBP-V films exhibited smooth morphology, excellent solvent resistance, and high mobility. Moreover, the high-performance red, green, and blue (RGB) QLEDs are successfully fabricated by using the photothermal synergic cross-linked HTLs, which achieved the maximum external quantum efficiency of 25.69, 24.42, and 16.51%, respectively. This work presents a strategy of using the photothermal synergic cross-linked HTLs for fabrication of high-performance QLEDs and advancing their related device applications.