Synthesis of novel pyrazolo[3,4-b]quinolinebisphosphonic acids and an unexpected intramolecular cyclization and phosphonylation reaction.

Novel pyrazolo[3,4-b]quinoline α-ketophosphonic and hydroxymethylenebisphosphonic acid compounds were synthesized using different methodologies, starting from 2-chloro-3-formylquinoline 1. New phosphonic acid compounds were obtained as N-1 derivatives with a side chain with 1 or 3 (n = 1 or 3) methylene groups. All phosphonic acid compounds and their corresponding ester and carboxylic acid precursors were fully characterized, and their structures elucidated by spectroscopic data, using NMR techniques and infrared and high-resolution mass spectroscopy. During the process to obtain the N-1 substituted derivative with two methylene groups (n = 2) in the side chain, an unexpected addition-cyclization cascade reaction was observed, involving the phosphonylation of an aromatic ring and the formation of a new six-member lactam ring to afford a tetracyclic ring system. This was an unexpected result since other pyrazolo[3,4-b]quinoline derivatives and all corresponding pyrazolo[3,4-b]pyridine derivatives already prepared, under similar experimental conditions, did not undergo this reaction. This domino reaction occurs with different phosphite reagents but only affords the six-member ring. The spectroscopic data allowed the identification of the new synthesized tetracyclic compounds and the X-ray diffraction data of compound 11 enabled the confirmation of the proposed structures.

Antimicrobial Activity of Pyrazinamide Coordination Frameworks Synthesized by Mechanochemistry.

The urge for the development of a more efficient antibiotic crystalline forms led us to the disclosure of new antibiotic coordination frameworks of pyrazinamide, a well-known drug used for the treatment of tuberculosis, with some of the novel compounds unravelling improved antimycobacterial activity. Mechanochemistry was the preferred synthetic technique to yield novel compounds, allowing the reproduction of a 1D zinc framework, the synthesis of a novel hydrogen bonding manganese framework, and three new compounds with silver. The structural characterization of the novel forms is presented along with stability studies. The increased antimicrobial activity of the new silver-based frameworks against Escherichia coli, Staphylococcus aureus, and Mycobacterium smegmatis is particularly relevant.

Mechanochemistry in Portugal-A Step towards Sustainable Chemical Synthesis.

In Portugal, publications with mechanochemical methods date back to 2009, with the report on mechanochemical strategies for the synthesis of metallopharmaceuticals. Since then, mechanochemical applications have grown in Portugal, spanning several fields, mainly crystal engineering and supramolecular chemistry, catalysis, and organic and inorganic chemistry. The area with the most increased development is the synthesis of multicomponent crystal forms, with several groups synthesizing solvates, salts, and cocrystals in which the main objective was to improve physical properties of the active pharmaceutical ingredients. Recently, non-crystalline materials, such as ionic liquids and amorphous solid dispersions, have also been studied using mechanochemical methods. An area that is in expansion is the use of mechanochemical synthesis of bioinspired metal-organic frameworks with an emphasis in antibiotic coordination frameworks. The use of mechanochemistry for catalysis and organic and inorganic synthesis has also grown due to the synthetic advantages, ease of synthesis, scalability, sustainability, and, in the majority of cases, the superior properties of the synthesized materials. It can be easily concluded that mechanochemistry is expanding in Portugal in diverse research areas.

The Lisbon Supramolecular Green Story: Mechanochemistry towards New Forms of Pharmaceuticals.

This short review presents and highlights the work performed by the Lisbon Group on the mechanochemical synthesis of active pharmaceutical ingredients (APIs) multicomponent compounds. Here, we show some of our most relevant contributions on the synthesis of supramolecular derivatives of well-known commercial used drugs and the corresponding improvement on their physicochemical properties. The study reflects, not only our pursuit of using crystal engineering principles for the search of supramolecular entities, but also our aim to correlate them with the desired properties. The work also covers our results on polymorphic screening and describes our proposed alternatives to induce and maintain specific polymorphic forms, and our approach to avoid polymorphism using APIs as ionic liquids. We want to stress that all the work was performed using mechanochemistry, a green advantageous synthetic technique.

Cucurbalsaminones A-C, Rearranged Triterpenoids with a 5/6/3/6/5-Fused Pentacyclic Carbon Skeleton from Momordica balsamina, as Multidrug Resistance Reversers.

Three new triterpenoids, cucurbalsaminones A-C (1-3), featuring a unique 5/6/3/6/5-fused pentacyclic carbon skeleton, named cucurbalsaminane, were isolated from a methanol extract of Momordica balsamina. Their structures were elucidated by spectroscopic methods and corroborated, for 1, by structure solution using single-crystal X-ray diffraction analysis. A hypothetical biogenetic pathway for these compounds is proposed. Compounds 1-3 were evaluated for their P-glycoprotein (P-gp/ABCB1) modulation ability, using a mouse T-lymphoma MDR1-transfected cell model by the rhodamine-123 accumulation assay, and displayed potent multidrug resistance (MDR)-reversing activity.

Hydrogen bonding networks in gabapentin protic pharmaceutical salts: NMR and in silico studies.

Hydrogen bonds (HBs) play a key role in the supramolecular arrangement of crystalline solids and, although they have been extensively studied, the influence of their strength and geometry on crystal packing remains poorly understood. Here we describe the crystal structures of two novel protic gabapentin (GBP) pharmaceutical salts prepared with the coformers methanesulfonic acid (GBP:METHA) and ethanesulfonic acid (GBP:ETHA). This study encompasses experimental and computational electronic structure analyses of 1 H NMR chemical shifts (CSs), upon in silico HB cleavage. GBP:METHA and GBP:ETHA crystal packing comprise two main structural domains: an ionic layer (characterized by the presence of charge-assisted + NHGBP ⋯O-METHA/ETHA HB interactions) and a neutral layer generated in a different way for each salt, mainly due to the presence of bifurcated HB interactions. A comprehensive study of HB networks is presented for GBP:METHA, by isolating molecular fragments involved in distinct HB types (NH⋯O, OH⋯O, and CH⋯O) obtained from in silico disassembling of an optimized three-dimensional packing structure. Formation of HB leads to calculated 1 H NMR CS changes from 0.4 to ~5.8 ppm. This study further attempts to assess how 1 H NMR CS of protons engaged in certain HB are affected when other nearby HB, involving bifurcated or geminal/vicinal hydrogen atoms, are removed.

Ionic Co-Crystal Formation as a Path Towards Chiral Resolution in the Solid State.

The preparation and characterization of a whole family of hydrated ionic co-crystals formed by both enantiopure l-proline and racemic dl-proline with LiX (X=Cl, Br, I) are reported. The chiral preference of the lithium cation for homochiral coordination, both in the formation of crystalline conglomerates (with Cl and Br) and racemates (with Cl and I), in which molecules of opposite chirality are confined to distinct crystal layers, is discussed. Dehydration processes for all hydrated crystals have also been investigated.

Exploring mechanochemistry to turn organic bio-relevant molecules into metal-organic frameworks: a short review.

Mechanochemistry is a powerful and environmentally friendly synthetic technique successfully employed in different fields of synthetic chemistry. Application spans from organic to inorganic chemistry including the synthesis of coordination compounds. Metal-organic frameworks (MOFs) are a class of compounds with numerous applications, from which we highlight herein their application in the pharmaceutical field (BioMOFs), whose importance has been growing and is now assuming a relevant and promising domain. The need to find cleaner, greener and more energy and material-efficient synthetic procedures led to the use of mechanochemistry into the synthesis of BioMOFs.

Luminescent Di- and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis, Characterization, and Application in OLEDs.

New bis- and tris(iminopyrrole)-functionalized linear (1,2-(HNC4 H3 -C(H)N)2 -C6 H4 (2), 1,3-(HNC4 H3 -C(H)N)2 -C6 H4 (3), 1,4-(HNC4 H3 -C(H)N)2 -C6 H4 (4), 4,4'-(HNC4 H3 -C(H)N)2 -(C6 H4 -C6 H4 ) (5), 1,5-(HNC4 H3 C-(H)N)2 -C10 H6 (6), 2,6-(HNC4 H3 C-(H)N)2 -C10 H6 (7), 2,6-(HNC4 H3 C-(H)N)2 -C14 H8 (8)) and star-shaped (1,3,5-(HNC4 H3 -C(H)N-1,4-C6 H4 )3 -C6 H3 (9)) π-conjugated molecules were synthesized by the condensation reactions of 2-formylpyrrole (1) with several aromatic di- and triamines. The corresponding linear diboron chelate complexes (Ph2 B[1,3-bis(iminopyrrolyl)-phenyl]BPh2 (10), Ph2 B[1,4-bis(iminopyrrolyl)-phenyl]BPh2 (11), Ph2 B[4,4'-bis(iminopyrrolyl)-biphenyl]BPh2 (12), Ph2 B[1,5-bis(iminopyrrolyl)-naphthyl]BPh2 (13), Ph2 B[2,6-bis(iminopyrrolyl)-naphthyl]BPh2 (14), Ph2 B[2,6-bis(iminopyrrolyl)-anthracenyl]BPh2 (15)) and the star-shaped triboron complex ([4',4'',4'''-tris(iminopyrrolyl)-1,3,5-triphenylbenzene](BPh2 )3 (16)) were obtained in moderate to good yields, by the treatment of 3-9 with B(C6 H5 )3 . The ligand precursors are non-emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π-conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time-dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13, in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples (11, 12, 14, and 15), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO-LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π-system, to afford green to yellow emissions. Organic light-emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m(-2) , for single layer devices, increasing to 4400 cd m(-2) when a hole-transporting layer is used.

Dicarboxylate recognition properties of a dinuclear copper(II) cryptate.

A ditopic polyamine macrobicyclic compound with biphenylmethane spacers was prepared, and its dinuclear copper(II) complex was studied as a receptor for the recognition of dicarboxylate anions of varying chain length in H2O/MeOH (50:50 (v/v)) solution. The acid-base behavior of the compound, the stability constants of its complexes with Cu(2+) ion, and the association constants of the copper(II) cryptate with succinate (suc(2-)), glutarate (glu(2-)), adipate (adi(2-)), and pimelate (pim(2-)) were determined by potentiometry at 298.2 ± 0.1 K in H2O/MeOH (50:50 (v/v)) and at ionic strength 0.10 ± 0.01 M in KNO3. The association constants of the same cryptate as receptor for aromatic dicarboxylate substrates, such as phthalate (ph(2-)), isophthalate (iph(2-)), and terephthalate (tph(2-)), were determined through competition experiments by spectrophotometry in the UV region. Remarkably high values of association constants in the range of 7.34-10.01 log units were found that are, to the best of our knowledge, the highest values of association constants reported for the binding of dicarboxylate anions in aqueous solution. A very well defined peak of selectivity was observed with the binding constant values increasing with the chain length and reaching the maximum for substrates with four carbon atoms between the carboxylate groups. Single-crystal X-ray diffraction determinations of the cascade complexes with adi(2-) and tph(2-) assisted in the understanding of the selectivity of the cryptate toward these substrates. The Hirshfeld surface analyses of both cascade complexes suggest that the establishment of several van der Waals interactions between the substrates and the walls of the receptor also contributes to the stability of the associations.

12,17-Cyclojatrophane and Jatrophane Constituents of Euphorbia welwitschii.

Euphowelwitschines A (1) and B (2), isolated from a methanolic extract of Euphorbia welwitschii, exhibit a rare combination of structural features in having a 5/8/8 fused-ring system and a 12,15-ether bridge. Moreover, the isolation of the additional new compounds welwitschene (3) and epoxywelwitschene (4) has provided insights into the biogenetic pathway of 12,17-cyclojatrophanes. The structures of 1-4 were determined by spectroscopic methods inclusive of 1D and 2D NMR experiments and X-ray crystallography for compounds 1 and 2. Preliminary information on the selective antiproliferative activity of compounds 1-4 is also described.

Tunable fluorophores based on 2-(N-arylimino)pyrrolyl chelates of diphenylboron: synthesis, structure, photophysical characterization, and application in OLEDs.

Reactions of 2-(N-arylimino)pyrroles (HNC4H3C(H)=N-Ar) with triphenylboron (BPh3) in boiling toluene afford the respective highly emissive N,N'-boron chelate complexes, [BPh2 {κ(2)N,N'-NC4H3C(H)=N-Ar}] (Ar=C6H5 (12), 2,6-Me2-C6H3 (13), 2,6-iPr2-C6H3 (14), 4-OMe-C6H4 (15), 3,4-Me2-C6 H3 (16), 4-F-C6H4 (17), 4-NO2-C6H4 (18), 4-CN-C6H4 (19), 3,4,5-F3-C6H2 (20), and C6F5 (21)) in moderate to high yields. The photophysical properties of these new boron complexes largely depend on the substituents present on the aryl rings of their N-arylimino moieties. The complexes bearing electron-withdrawing aniline substituents 17-20 show more intense (e.g., ϕf =0.71 for Ar=4-CN-C6H4 (19) in THF), higher-energy (blue) fluorescent emission compared to those bearing electron-donating substituents, for which the emission is redshifted at the expense of lower quantum yields (ϕf=0.13 and 0.14 for Ar=4-OMe-C6H4 (15) and 3,4-Me2-C6H3 (16), respectively, in THF). The presence of substituents bulkier than a hydrogen atom at the 2,6-positions of the aryl groups strongly restricts rotation of this moiety towards coplanarity with the iminopyrrolyl ligand framework, inducing a shift in the emission to the violet region (λmax =410-465 nm) and a significant decrease in quantum yield (ϕf=0.005, 0.023, and 0.20 for Ar=2,6-Me2-C6H3 (13), 2,6-iPr2-C6H3 (14), and C6F5 (21), respectively, in THF), even when electron-withdrawing groups are also present. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations have indicated that the excited singlet state has a planar aryliminopyrrolyl ligand, except when prevented by steric hindrance (ortho substituents). Calculated absorption maxima reproduce the experimental values, but the error is higher for the emission wavelengths. Organic light-emitting diodes (OLEDs) have been fabricated with the new boron complexes, with luminances of the order of 3000 cd m(-2) being achieved for a green-emitting device.

Trienamines derived from 5-substituted furfurals: remote ε-functionalization of 2,4-dienals.

The selective ε-functionalization of 5-substituted furfurals via trienamine intermediates is reported herein. This methodology was successfully applied to several 5-substituted furfurals with different amines via formation of a trienamine through the furan ring. The rationalized reaction mechanism involves the addition of the trienamine intermediate to its corresponding iminium-ion producing new furan-containing scaffolds.

Mechanochemical Synthesis of New Praziquantel Cocrystals: Solid-State Characterization and Solubility.

New cocrystals of praziquantel with suberic, 3-hydroxybenzoic, benzene-1,2,4,5-tetracarboxylic, trimesic, and 5-hydroxyisophthalic acids were obtained through ball milling experiments. The optimal conditions for the milling process were chosen by changing the solvent volume and the mechanical action time. Supramolecular interactions in the new cocrystals are detailed based on single-crystal X-ray diffraction analysis, confirming the expected formation of hydrogen bonds between the praziquantel carbonyl group and the carboxyl (or hydroxyl) moieties of the coformers. Different structural characterization techniques were performed for all samples, but the praziquantel:suberic acid cocrystal includes a wider range of investigations such as thermal analysis, infrared and X-ray photoelectron spectroscopies, and SEM microscopy. The stability for up to five months was established by keeping it under extreme conditions of temperature and humidity. Solubility studies were carried out for all the new forms disclosed herein and compared with the promising cocrystals previously reported with salicylic, 4-aminosalicylic, vanillic, and oxalic acids. HPLC analyses revealed a higher solubility for most of the new cocrystal forms, as compared to pure praziquantel.

Toward the understanding of radical reactions: experimental and computational studies of titanium(III) diamine bis(phenolate) complexes.

Radical reactions of titanium(III) [Ti((tBu2)O2NN')Cl(S)] (S = THF, 1; S = py, 2; (tBu2)O2NN' = Me2N(CH2)2N(CH2-2-O-3,5-(t)Bu2C6H2)2) are described. Reactions with neutral electron acceptors led to metal oxidation to Ti(IV), [Ti((tBu2)O2NN')Cl(TEMPO)] (4) being formed with the TEMPO radical and [Ti((tBu2)O2NN')Cl2] (9) with PhN═NPh. [Ti((tBu2)O2NN')Cl2] was also formed when [Ti((tBu2)O2NN')Cl(S)] was oxidized by [Cp2Fe][BPh4], but the [Cp2Fe][PF6] analogue yielded [Ti((tBu2)O2NN')ClF] (8). The reactions of [Ti((tBu2)O2NN')Cl(S)] with O2 gave [Ti((tBu2)O2NN')Cl]2(µ-O) (3). The DFT calculated Gibbs energy for the above reaction showed it to be exergonic (ΔG298 = -123.6 kcal·mol(-1)). [Ti((tBu2)O2NN')(CH2Ph)(S)] (S = THF, 5; py, 6) are not stable in solution for long periods and in diethyl ether gave 1:1 cocrystals of [Ti((tBu2)O2NN')(CH2Ph)2] (7) and [Ti((tBu2)O2NN')Cl]2(µ-O) (3), most probably resulting from a disproportionation process of titanium(III) followed by oxygen abstraction by the resulting Ti(II) species. The oxidation of [Ti((tBu2)O2NN')(κ(2)-{CH2-2-(NMe2)-C6H4})] (10), which is a Ti(III) benzyl stabilized by the intramolecular coordination of the NMe2 moiety, led to a complex mixture. Recrystallization of this mixture under air led to a 1:1 cocrystal of two coordination isomers of the titanium oxo dimer (3). In one of these isomers, one metal is pentacoordinate and the dimethylamine moiety of the diamine bis(phenolate) ligand is not bonded to the metal, displaying a coordination mode of the ligand never observed before. The other titanium center is distorted octahedral with two cis-phenolate moieties. In the second unit, the coordination of the two ancillary ligands to the titanium centers reveals mutually cis-phenolate groups in one-half of the molecule and trans-coordinated in the other titanium center, keeping a distorted octahedral environment around each titanium.

Structural Optimization of Antimycobacterial Azaaurones Towards Improved Solubility and Metabolic Stability.

While N-acetyl azaaurones have already been disclosed for their potential against tuberculosis (TB), their low metabolic stability remains an unaddressed liability. We now report a study designed to improve the metabolic stability and solubility of the azaaurone scaffold and to identify the structural requirements for antimycobacterial activity. Replacing the N-acetyl moiety for a N-carbamoyl group led to analogues with sub- and nanomolar potencies against M. tuberculosis H37Rv, as well as equipotent against drug-susceptible and drug-resistant M. tuberculosis isolates. The new N-carbamoyl azaaurones exhibited improved microsomal stability, compared to their N-acetylated counterparts, with several compounds displaying moderate to high kinetic solubility. The frequency of spontaneous resistance to azaaurones was observed to be in the range of 10-8 , a value that is comparable to current TB drugs in the market. Overall, these results reveal that azaaurones are amenable to structural modifications to improve metabolic and solubility liabilities, and highlight their potential as antimycobacterial agents.

Iminopyrrole derivatives containing electron-withdrawing substituents: the formation of dimers and supramolecular arrangements.

The crystal structures of two p-substituted phenylformiminopyrrole derivatives, namely 2-[(4-fluorophenyl)iminomethyl]pyrrole, C(11)H(9)FN(2), (1), and 2-[(1H-pyrrol-2-ylmethylidene)amino]benzonitrile, C(12)H(9)N(3), (2), bear F and C[triple-bond]N electron-withdrawing groups, respectively. Both structures feature two independent molecules in the asymmetric unit forming dimers via N-H...N hydrogen bonds. In the case of (1), each dimer interacts with two other dimers via C-H...F contacts, thus forming one-dimensional chains in the b direction, whereas in the case of (2), a weak C-H...N interaction connects the dimers in one-dimensional chains in the (110) direction.

New dirhodium complex with activity towards colorectal cancer.

A novel dirhodium complex (Rh(2)(L-PheAla)(2)(OAc)(2) is reported with strong activity towards human colon adenocarcinoma cells. Its effect was not accompanied by generation of reactive oxygen species (ROS) neither by activation of caspase-3.

Vanadium diaminebis(phenolate) complexes: syntheses, structures, and reactivity in sulfoxidation catalysis.

Vanadium diaminebis(phenolate) complexes of the general formulas [LVCl(THF)] (L = Me(2)NCH(2)CH(R)N(CH(2)-2-O-3,5-C(6)H(2)(t)Bu(2))(2), where R = H, Me) and [LV(O)X] [X = Cl; R = H (2), Me (3), O(i)Pr (4), (mu-O)V(O)L (5)] are described. All compounds display octahedral geometry and trans-O(Ph) coordination. For compounds 2, 3, and 5, only one isomer, presenting the V=O ligand trans to the tripodal nitrogen, was formed, while for 4, two isomers were observed by NMR in solution. The UV-vis and circular dichroism spectra of 2 and 3 display very intense charge-transfer transition bands from the phenolate donors to the vanadium, which are in agreement with the (51)V low-field shifts observed. All vanadium(V) complexes were tested as thioanisole sulfoxidation catalysts, revealing very high selectivity when H(2)O(2) was used as the oxidant. However, no enantioselectivity was observed even when enantiopure 3 was used as the catalyst precursor. (1)H and (51)V NMR studies were conducted for the reactions of 2 with aqueous solutions of H(2)O(2) in methanol-d(4) and in acetonitrile-d(3); 2 reacts with the solvents, leading to [LV(O)OMe], by replacement of Cl by MeO in methanol, and to a new vanadium aminebis(phenolate) complex, where the dimethylamine fragment of the original ligand L was replaced by CH(3)CN. In either case, (51)V NMR spectra suggest the formation of peroxovanadium species upon the addition of a H(2)O(2) solution. The subsequent addition of thioanisole to the methanol-d(4) solution leads to regeneration of the original complex.

Pathway from chain to dimer in Cu(I) camphor hydrazone complexes.

The chemical reactivity, molecular structure, and surface characteristics of Cu(I) camphor hydrazone compounds indicate that exist a structural pathway for conversion of coordination polymers into dimers and vice versa. By X-ray diffraction analysis two polymorphic forms of the chain compound [{CuCl}(2)(Me(2)NNC(10)H(14)O)](n) were identified that essentially differ in the structural arrangement and geometry of the non-linear copper atom. The characterization of the dimer complexes [{Cu(Me(2)NNC(10)H(14)O)}(2)(µ-X)(2)] (X = Cl or Br) was also achieved by X-ray diffraction analysis showing the unusual arrangement of the camphor hydrazone ligands that occupy the same side of the molecule. Bond lengths and torsion angles show that one of the polymorphic forms is structurally close to the related dimer. The surface composition of the coordination polymers [{CuX}(2)(YNC(10)H(14)O)](n) (X = Cl, Y = NMe(2), NH(2); X = Br, Y = NH(2)) and dimers [{Cu(Me(2)NNC(10)H(14)O)}(2)(µ-X)(2)] (X = Cl or Br) studied by X-ray Photoelectron Spectroscopy corroborate the molecular properties and the reactivity trend.