Impact of Anionic Ordering on the Iron Site Distribution and Valence States in Oxyfluoride Sr2FeO3+xF1-x (x = 0.08, 0.2) with a Layered Perovskite Network.

Sr2FeO3F, an oxyfluoride compound with an n = 1 Ruddlesden-Popper structure, was identified as a potential interesting mixed ionic and electronic conductor (MIEC). The phase can be synthesized under a range of different pO2 atmospheres, leading to various degrees of fluorine for oxygen substitution and Fe4+ content. A structural investigation and thorough comparison of both argon- and air-synthesized compounds were performed by combining high-resolution X-ray and electron diffraction, high-resolution scanning transmission electron microscopy, Mössbauer spectroscopy, and DFT calculations. While the argon-synthesized phase shows a well-behaved O/F ordered structure, this study revealed that oxidation leads to averaged large-scale anionic disorder on the apical site. In the more oxidized Sr2FeO3.2F0.8 oxyfluoride, containing 20% of Fe4+, two different Fe positions can be identified with a 32%/68% occupancy (P4/nmm space group). This originates due to the presence of antiphase boundaries between ordered domains within the grains. Relations between site distortion and valence states as well as stability of apical anionic sites (O vs F) are discussed. This study paves the way for further studies on both ionic and electronic transport properties of Sr2FeO3.2F0.8 and its use in MIEC-based devices, such as solid oxide fuel cells.

Access to Heteroleptic Fluorido-Cyanido Complexes with a Large Magnetic Anisotropy by Fluoride Abstraction.

Silicon-mediated fluoride abstraction is demonstrated as a means of generating the first fluorido-cyanido transition metal complexes. This new synthetic approach is exemplified by the synthesis and characterization of the heteroleptic complexes, trans-[MIV F4 (CN)2 ]2- (M=Re, Os), obtained from their homoleptic [MIV F6 ]2- parents. As shown by combined high-field electron paramagnetic resonance spectroscopy and magnetization measurements, the partial substitution of fluoride by cyanide ligands leads to a marked increase in the magnetic anisotropy of trans-[ReF4 (CN)2 ]2- as compared to [ReF6 ]2- , reflecting the severe departure from an ideal octahedral (Oh point group) ligand field. This methodology paves the way toward the realization of new heteroleptic transition metal complexes that may be used as highly anisotropic building-blocks for the design of high-performance molecule-based magnetic materials.

[OsF6 ]x- : Molecular Models for Spin-Orbit Entangled Phenomena.

Heavy 5d elements, like osmium, feature strong spin-orbit interactions which are at the origin of exotic physical behaviors. Revealing the full potential of, for example, novel osmium oxide materials ("osmates") is however contingent upon a detailed understanding of the local single-ion properties. Herein, two molecular osmate analogues, [OsF6 ]2- and [OsF6 ]- , are reported as model systems for Os4+ and Os5+ centers found in oxides. Using X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) techniques, combined with state-of-the-art ab initio calculations, their ground state was elucidated; mirroring the osmium electronic structure in osmates. The realization of such molecular model systems provides a unique chemical playground to engineer materials exhibiting spin-orbit entangled phenomena.

Surface modification of polymers treated by various fluorinating media.

Fluorination processes of polymer surfaces are able to lead to drastic modifications of the surface properties without changing the bulk characteristics of the virgin material. In this paper, two types of polymers, i.e. ultrahigh molecular weight polyethylene (UHMWPE) and high density polyethylene (HDPE), are considered. The surface of these materials have been modified using two different fluorination routes, both carried out at room temperature: the direct fluorination with 10% F2 + 90% He gaseous mixtures and the radio-frequency plasma-enhanced fluorination (PEF) using either O2/CF4 mixtures or c-C4F8. The effect of these processes on the surface of the polymer samples are compared using mostly XPS results. The different components of the C1s spectra are assigned in term of CFx bonding, giving valuable information on the surface fluorination rate.

Experience and Appreciation of Health Care Teams Regarding a New Model of Pharmaceutical Care in Long-Term Care Settings.

In long-term care (LTC) homes, the management of frail older residents' pharmacotherapy may be challenging for health care teams. A new pharmaceutical care model highlighting the recently expanded scope of pharmacists' practice in Quebec, Canada, was implemented in two LTC homes. This study aimed to evaluate health care providers' experience and satisfaction with this new practice model. Twenty-three semi-structured interviews were performed and analyzed thematically. Positive results of the model have been identified, such as increased timeliness of interventions. Barriers were encountered, such as lack of clarity regarding roles, and suboptimal communication. The increased involvement of pharmacists was perceived as useful in the context of scarce medical resources. Although requiring time and adjustments from health care teams, the new model seems to contribute to the health care providers' work satisfaction and to positively influence the timeliness and quality of care offered to LTC residents.

Topotactic fluorination of intermetallics as an efficient route towards quantum materials.

Intermetallics represent an important family of compounds, in which insertion of light elements (H, B, C, N) has been widely explored for decades to synthesize novel phases and promote functional materials such as permanent magnets or magnetocalorics. Fluorine insertion, however, has remained elusive so far since the strong reactivity of this atypical element, the most electronegative one, tends to produce the chemical decomposition of these systems. Here, we introduce a topochemical method to intercalate fluorine atoms into intermetallics, using perfluorocarbon reactant with covalent C-F bonds. We demonstrate the potential of this approach with the synthesis of non-stoichiometric mixed anion (Si-F) LaFeSiFx single-crystals, which are further shown to host FeSi-based superconductivity. Fluorine topochemistry on intermetallics is thus proven to be an effective route to provide functional materials where the coexistence of ionic and metallo-covalent blocks, and their interactions through inductive effects, is at the root of their functional properties.

Reorganizing Pharmaceutical Care in Family Medicine Groups for Older Adults With or at Risk of Major Neurocognitive Disorders: Protocol for a Mixed Methods Study.

BACKGROUND: The latest global figures show that 55 million persons lived with major neurocognitive disorders (MNCDs) worldwide in 2021. In Quebec, Canada, most of these older adults are cared for by family physicians in interdisciplinary primary care clinics such as family medicine groups (FMG). When a person has a MNCD, taking potentially inappropriate medications or polypharmacy (5 different medications or more) increases their vulnerability to serious adverse events. With the recent arrival of pharmacists working in FMGs and their expanded scope of practice and autonomy, new possibilities for optimizing older adults' pharmacotherapy are opening. OBJECTIVE: This project aims to evaluate the impact of involving these pharmacists in the care trajectory of older adults living with MNCD, in an interdisciplinary collaboration with the FMG team, as well as home care nurses and physicians. Pharmacists will provide medication reviews, interventions, and recommendations to improve the pharmacotherapy and support offered to these patients and their caregivers. METHODS: This 2-step mixed methods study will include a quasi-experimental controlled trial (step 1) and semistructured interviews (step 2). Older adults undergoing cognitive assessment, recently diagnosed with MNCD, or receiving care for this at home will be identified and recruited in FMGs in 2 Quebec regions. FMGs implementing the intervention will involve pharmacists in these patients' care trajectory. Training and regular mentoring will be offered to these FMGs, especially to pharmacists. In control FMGs, no FMG pharmacist will be involved with these patients, and usual care will be provided. RESULTS: Medication use (including appropriateness) and burden, satisfaction of care received, and quality of life will be assessed at study beginning and after 6 months of follow-up and compared between groups. At the end of the intervention study, we will conduct semistructured interviews with FMG care team members (pharmacists, nurses, and physicians) who have experienced the intervention. We will ask about the feasibility of integrating the intervention into practice and their satisfaction with and their perception of the intervention's impacts for older adults and their families. We will assess the effect of improved pharmaceutical care for older adults with or at risk of MNCDs through the involvement of FMG pharmacists and a reorganization of pharmaceutical care. CONCLUSIONS: The inclusion of pharmacists in interdisciplinary care teams is recent and rising, strengthened by more substantial pharmacist practice roles. Results will inform the processes required to successfully involve pharmacists and implement developed tools and procedures transposable to other care settings to improve patient care. TRIAL REGISTRATION: ClinicalTrials.gov NCT04889794; https://clinicaltrials.gov/ct2/show/NCT04889794. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/42577.

Cytotoxicity and oxidative stress induced by different metallic nanoparticles on human kidney cells.

BACKGROUND: Some manufactured nanoparticles are metal-based and have a wide variety of applications in electronic, engineering and medicine. Until now, many studies have described the potential toxicity of NPs on pulmonary target, while little attention has been paid to kidney which is considered to be a secondary target organ. The objective of this study, on human renal culture cells, was to assess the toxicity profile of metallic nanoparticles (TiO2, ZnO and CdS) usable in industrial production. Comparative studies were conducted, to identify whether particle properties impact cytotoxicity by altering the intracellular oxidative status. RESULTS: Nanoparticles were first characterized by size, surface charge, dispersion and solubility. Cytotoxicity of NPs was then evaluated in IP15 (glomerular mesangial) and HK-2 (epithelial proximal) cell lines. ZnO and CdS NPs significantly increased the cell mortality, in a dose-dependent manner. Cytotoxic effects were correlated with the physicochemical properties of NPs tested and the cell type used. Analysis of reactive oxygen species and intracellular levels of reduced and oxidized glutathione revealed that particles induced stress according to their composition, size and solubility. Protein involved in oxidative stress such as NF-κb was activated with ZnO and CdS nanoparticles. Such effects were not observed with TiO2 nanoparticles. CONCLUSION: On glomerular and tubular human renal cells, ZnO and CdS nanoparticles exerted cytotoxic effects that were correlated with metal composition, particle scale and metal solubility. ROS production and oxidative stress induction clearly indicated their nephrotoxic potential.

The key role of the composition and structural features in fluoride ion conductivity in tysonite Ce1-xSrxF3-x solid solutions.

Pure tysonite-type Ce1-xSrxF3-x solid solutions for 0 ≤ x < 0.15 were prepared by a solid-state route at 900 °C. The cell parameters follow Vegard's laws for 0 ≤ x ≤ 0.10 and the solubility limit is identified (0.10 < xlimit < 0.15). For 0 ≤ x ≤ 0.05, the F2-(Ce,Sr) and F3-(Ce,Sr) bond distances into [Ce1-xSrxF](2-x)+ slabs strongly vary with x. This slab buckling is maximum around x = 0.025 and strongly affects the more mobile F1 fluoride ions located between the slabs. The 19F MAS NMR spectra show the occurrence of F1-F2,3 exchange at 64 °C. The fraction of mobile F2,3 atoms deduced from the relative intensity of the NMR resonance is maximum for Ce0.99Sr0.01F2.99 (22% at 64 °C) while this fraction linearly increases with x for La1-xAExF3-x (AE = Ba, Sr). The highest conductivity found for Ce0.975Sr0.025F2.975 (3 × 10-4 S cm-1 at RT, Ea = 0.31 eV) is correlated to the largest dispersion of F2-(Ce,Sr) and F3-(Ce,Sr) distances which induces the maximum sheet buckling. Such a relationship between composition, structural features and fluoride ion conductivity is extended to other tysonite-type fluorides. The key role of the difference between AE2+ and RE3+ ionic radii and of the thickness of the slab buckling is established and could allow designing new ionic conductors.

Tuning the Mn valence state in new Ca(0.66)Mn(2-x)Al(x)O4 (x≤ 0.4) oxides: impact on magnetic and redox properties.

New Ca(0.66)Mn(2-x)Al(x)O4 (x≤ 0.4) solid solutions crystallizing with the CaFe2O4-type structure (SG: Pnma) were synthesized for the first time by the glycine-nitrate process. The structures were determined on the basis of XRD Rietveld analysis and electron diffraction investigation. While the CaMn3O6 ('Ca(0.66)Mn2O4') oxide adopts a monoclinic unit cell, the Al substitution for Mn (x = 0.2, 0.4) leads to an orthorhombic cell with only two Mn atomic positions, with different valence states, and 33% of Ca sites empty. The Ca molar concentration decreases down to 0.6 in order to increase the Mn valence leading to a phase mixture, whereas a slight Ca content increase up to 0.7 leads to a decrease of Mn valence in the pure phase. The Al(3+) ions are located at a specific Mn site because their ionic radii are close to that of Mn(4+) and a more isotropic environment. The unit cell parameters and volume strongly decrease for a low Al content and tend to an asymptotic value of x = 0.33-0.4, around the limit of solubility. As the Al content increases, the Mn valence state in the same slightly distorted octahedral site increases up to 4+ whereas the other octahedral site is highly elongated and corresponds mainly to Jahn-Teller Mn(3+). At x = 0.33, these two Mn sites correspond to Mn(4+) and Mn(3+) respectively. Moreover, the aluminium content increase induces a weakening of the global antiferromagnetic long range interactions between the ferromagnetic chains. The Al substitution leads to the change of the Mn valence distribution as well as the unit cell symmetry of the CaMn3O6 phase. These 1D tunnel networks stabilizing the Mn(3+)/Mn(4+) valence states can be reduced under Ar/5%H2 between T = 300 °C and T = 600 °C (heating rate = 2 °C min(-1)) into pure Mn(2+) rocksalt solid solution despite the large difference in ionic radii. The re-oxidation leads to the same CaFe2O4-type structure and several redox cycles can be operated. The relationship between the two double chains of the edge-sharing octahedral sites and the rocksalt-type framework is clear and should appear as the driving force for the structural transformation during the reduction/oxidation processes. Finally, Al substitution allows an increasing of the Mn-O bond covalence and consequently the reduction in temperature.

Iridates from the molecular side.

New exotic phenomena have recently been discovered in oxides of paramagnetic Ir(4+) ions, widely known as 'iridates'. Their remarkable properties originate from concerted effects of the crystal field, magnetic interactions and strong spin-orbit coupling, characteristic of 5d metal ions. Despite numerous experimental reports, the electronic structure of these materials is still challenging to elucidate, and not attainable in the isolated, but chemically inaccessible, [IrO6](8-) species (the simplest molecular analogue of the elementary {IrO6}(8-) fragment present in all iridates). Here, we introduce an alternative approach to circumvent this problem by substituting the oxide ions in [IrO6](8-) by isoelectronic fluorides to form the fluorido-iridate: [IrF6](2-). This molecular species has the same electronic ground state as the {IrO6}(8-) fragment, and thus emerges as an ideal model for iridates. These results may open perspectives for using fluorido-iridates as building-blocks for electronic and magnetic quantum materials synthesized by soft chemistry routes.

Fluoride solid electrolytes: investigation of the tysonite-type solid solutions La1-xBaxF3-x (x < 0.15).

Pure tysonite La1-xBaxF3-x solid solutions for x < 0.15 were prepared by solid state synthesis in a platinum tube under an azote atmosphere with subsequent quenching for 0.07 ≤x < 0.15. The solid solutions were studied by X-ray, electron and neutron diffractions and by (19)F NMR and impedance spectroscopy. The evolution of the cell parameters obeying Vegard's rule was determined for 0 < x≤ 0.15 and atomic position parameters were accurately refined for x = 0.03, 0.07 and 0.10. The chemical pressure induced by large Ba(2+) cations leads to an increase of the unit cell parameters. Fluorine environment and mobilities are discussed on the basis of the results of neutron diffraction and (19)F solid state NMR. The F1 subnetwork is lacunar; fluorine exchange occurs according to the order: F1-F1 and F1-F2,3. 2D EXSY NMR spectra of La0.97Ba0.03F2.97 reveal, for the first time, a chemical exchange between F2 and F3 sites that requires two successive jumps. The ionic conductivity was evaluated from sintered pellets and different shaping methods were compared. The only structural features which could explain the conductivity maximum are a crossover together with a smaller dispersion of F1-F1,2,3 distances at x = 0.05-0.07.

Impact of dietary cadmium sulphide nanoparticles on Danio rerio zebrafish at very low contamination pressure.

To address the impact of cadmium sulphide nanoparticles (CdSNPs) of two different sizes (8 and 50 nm), Danio rerio zebrafish were dietary exposed to very low doses: 100 or 40 ng CdSNPs/day/g body weight for 36 or 60 days, respectively. The results obtained using RAPD-PCR genotoxicity test showed genomic alteration since the number of hybridisation sites of the RAPD probes was significantly modified after CdSNPs exposure. In addition, selected stress response genes were either repressed or upregulated in tissues of CdSNPs-exposed fish. Mitochondrial dysfunction was also caused by the presence of CdSNPs in food. Cadmium accumulation in fish tissues (brain and muscles) could only be observed after 60 days of exposure. CdSNPs toxicity was dependent on their size and concentration.

Synthesis of hybrid gold-gold sulfide colloidal particles.

The nucleation and growth mechanism of nanometer size gold onto gold sulfide colloidal particles by irradiation-induced reduction is reported. The process is characterized by ultraviolet-visible spectroscopy, electronic diffraction, and high-resolution transmission electron microscopy, allowing for observation of several key intermediates and characteristics of the growth mechanism. The formation mechanism of gold on the surface of the gold sulfide particles is shown to depend strongly on the deposition rate. At low dose rate, gold nucleates preferentially onto specific gold-rich Au2S facets {110}, resulting in epitaxial growth. The gold crystal lattice plastically deforms near the interface to accommodate a substantial lattice mismatch. Upon increasing gold precursor concentration, this low dose rate results in growth of elongated gold island on the gold sulfide surface. At a high dose rate, several randomly oriented gold particles are simultaneously produced on gold sulfide, resulting in a layered structure. The absorption spectra of these particles show a dominant surface plasmon band, whose peak wavelength shifts markedly to the red as layered structure is formed.

Coupling sol-gel synthesis and microwave-assisted techniques: a new route from amorphous to crystalline high-surface-area aluminium fluoride.

A non-aqueous sol-gel Al-based fluoride has been subjected to the microwave solvothermal process. The final material depends on the temperature heat treatment used. Three types of material have been prepared: 1) for low temperature heat treatment (90 degrees C) X-ray amorphous alkoxy fluoride was obtained; 2) for the highest temperature used (200 degrees C) the metastable form beta-AlF3 was obtained with a very large surface area of 125 m2 g(-1). The mechanism of the amorphous=crystalline transformation has been rationalised by the occurrence of a decomposition reaction of the gel fluoride induced by the microwave irradiation. 3) Finally, at intermediate temperature (180 degrees C) a multi-component material mixture exhibiting a huge surface area of 525 m2 g(-1) has been obtained and further investigated after mild post-treatment fluorination using F2 gas. The resulting aluminium-based fluoride still possesses a high-surface-area of 330 m2 g(-1). HRTEM revealed that the solid is built from large particles (50 nm) identified as alpha-AlF3, and small ones (10 nm), relative to an unidentified phase. This new high-surface-area material exhibits strong Lewis acidity as revealed by pyridine adsorption and catalytic tests. By comparison with other materials, it has been shown that whatever the composition/structure of the Al-based fluoride materials, the number of strong Lewis acid sites is related to the surface area, highlighting the role of surface reconstruction occurring on a nanoscopic scale on the formation of the strongest Lewis acid sites.