RESUMO
Phosphorothioate (PS) oligonucleotides are a rapidly rising class of drugs with significant therapeutic applications. However, owing to their complex structure and multistep synthesis and purification processes, generation of low-level impurities and degradation products are common. Therefore, they require significant investment in quality control and impurity identification. This requires the development of advanced methods for analysis, characterization and quantitation. In addition, the presence of the PS linkage leads to the formation of chiral centers which can affect their biological properties and therapeutic efficiency. In this review, the different types of oligonucleotide impurities and degradation products, with an emphasis on their origin, mechanism of formation and methods to reduce, prevent or even eliminate their production, will be extensively discussed. This review will focus mainly on the application of chromatographic techniques to determine these impurities but will also discuss other approaches such as mass spectrometry, capillary electrophoresis and nuclear magnetic resonance spectroscopy. Finally, the chirality and formation of diastereomer mixtures of PS oligonucleotides will be covered as well as approaches used for their characterization and the application for the development of stereochemically-controlled PS oligonucleotides.
Assuntos
Oligonucleotídeos/análise , Oligonucleotídeos/uso terapêutico , Controle de Qualidade , Cromatografia Líquida de Alta Pressão/métodos , Eletroforese/métodos , Humanos , Espectroscopia de Ressonância Magnética/métodos , Espectrometria de Massas/métodos , Oligonucleotídeos/síntese química , EstereoisomerismoRESUMO
An accurate and sensitive synchronous spectrofluorimetric method has been developed for the determination of Polymyxin B sulphate (Poly B) in human plasma. The method is based on the reaction of non-fluorescent Poly B with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in borate buffer of pH 7 producing a yellow color with maximum relative fluorescence at 440 nm using a constant wavelength difference Δλ = 80 nm. Reaction conditions and other analytical parameters were studied and optimized using factorial design. Three level factorial designs have been employed for the screening, optimization of all experimental variables and determination of their interactions on the final product formation. The variables under investigation were: pH of borate buffer, volume of buffer, volume of NBD-Cl, temperature, time of heating and volume of sulfuric acid. A linear plot between relative fluorescence and concentration was obtained over the concentration range 100.00-1200.00 ng mL(-1). The limit of detection (LOD) and limit of quantification (LOQ) were found to be 10.31 and 31.24 ng mL(-1), respectively. The proposed method was validated according to ICH guidelines and successfully applied for the determination of Poly B in human plasma, where satisfactory results were obtained. The results obtained were statistically compared with those of a published method, where no significant difference was observed.
Assuntos
4-Cloro-7-nitrobenzofurazano/química , Polimixina B/sangue , Polimixina B/química , Espectrometria de Fluorescência/métodos , Humanos , Concentração de Íons de Hidrogênio , Limite de Detecção , Reprodutibilidade dos Testes , Espectrofotometria Ultravioleta/métodos , Temperatura , Fatores de TempoRESUMO
A novel method could be adopted successfully for determination of anthracene in environmental samples, utilizing dispersive liquid-liquid extraction followed by first-derivative synchronous fluorimetry at a constant wavelength difference Δλ = 165 nm, where a linear calibration curve was obtained in a concentration range of 0.5-100 ng mL(-1) at 244 nm. The detection limit was 0.1 ng mL(-1). The method can be easily adopted for determination of anthracene in aqueous media including tap water and river water. The recoveries obtained were 85.40-108.02%. The proposed method was validated according to International Conference of Harmonization (ICH) guide lines and successfully applied to determine anthracene in pure form and in water samples including real life water samples from different sources. All the results obtained were compared with those of published method, where no a significant difference was observed.
Assuntos
Antracenos/análise , Extração Líquido-Líquido/métodos , Espectrometria de Fluorescência/métodos , Poluentes Químicos da Água/análise , Água/análise , Calibragem , Cromatografia Líquida de Alta Pressão , Limite de DetecçãoRESUMO
Successfully benzo(a)pyrene could be quantitified in environmental samples by a novel synchronous spectrofluorimetric techniques at a constant wavelength difference Δλ = 120 nm, using beta-cyclodextrin 'ß-CD' and calix(8)arene as fluorescence enhancers, where a linear calibration curve was obtained in a concentration range of 900-14,400 pg mL(-1) and 18-360 pg mL(-1) and the detection limit of 380.00 pg mL(-1) and 12.08 pg mL(-1) (which is well below the maximum contaminant concentration for benzo(a)pyrene set by the Environmental Protection Agency 'EPA') using both enhancers, respectively. The method can be easily adopted for determination of benzo(a)pyrene in aqueous media including tap water, river water and complex water samples. The recoveries obtained were 85.13-113.36 % with RSD < 4 %. The proposed method was validated according to International Conference of Harmonization (ICH) guide lines and successfully applied to determine benzo(a)pyrene in pure form and in water samples including contaminated environmental water samples. All the results obtained were compared with those of a published method, where no significant difference was observed.
Assuntos
Calixarenos/química , Espectrometria de Fluorescência/métodos , beta-Ciclodextrinas/química , TemperaturaRESUMO
Egypt has the highest prevalence of hepatitis C virus (HCV) in the world thus it launched a national program for eliminating HCV aiming to treat 300,000 HCV patients per year. Three anti-HCV co-administered drugs; ribavirin (RBV), sofosbuvir (SF) daclatasvir (DAC) were simultaneously determined in human plasma by a validated, simple and sensitive RP-HPLC method using propyl paraben as an internal standard. Liquid-liquid extraction using ethyl acetate was used for samples extraction. Chromatographic separation was achieved on Scharlau® C18 column (250 × 4.6 mm2, 5 µm). Gradient elution was employed with a mobile phase mixture of water and acetonitrile at a flow rate 1 mL/min. UV detection using photodiode array detector was carried out at 207, 260 and 312 nm for RBV, SF and DAC, respectively. Method validation was performed according to the FDA guidelines for bioanalytical method validation. The calibration curves were linear over the ranges (0.5-80, 0.1-40 and 0.5-80 µg/mL) with average recoveries (100.64-108.28%, 98.48-105.91% and 97.68-101.38%) for RBV, SF and DAC, respectively. The intra-day and inter-day precision and accuracy results were within the acceptable limits. Stability assays revealed that the three studied analytes were stable during sample storage, preparation and injection. The method can be successfully applied in routine analysis of plasma of HCV patients treated with this combination therapy which aids in therapeutic drug monitoring and patients' follow-up especially in Egypt and other developing countries fighting HCV.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Imidazóis/sangue , Ribavirina/sangue , Sofosbuvir/sangue , Carbamatos , Egito , Hepatite C Crônica/tratamento farmacológico , Humanos , Imidazóis/uso terapêutico , Limite de Detecção , Modelos Lineares , Pirrolidinas , Reprodutibilidade dos Testes , Ribavirina/uso terapêutico , Sofosbuvir/uso terapêutico , Valina/análogos & derivadosRESUMO
Innovative host-tailored polymers were prepared, characterized and used as recognition elements in potentiometric transducers for the selective quantification of 2,4-dichlorophenol (DCP).The polymer beads were synthesized using DCP as a template molecule, acrylamide (AM),methacrylic acid (MAA) and ethyl methacrylate (EMA) as functional monomers and divinylbenzene (DVB) and ethylene glycol dimethacrylate (EGDMA) as cross-linkers. The sensors were fabricated by the inclusion of MIPs in plasticized polyvinyl chloride (PVC) matrix. Response characteristics of the proposed sensors revealed anionic slopes of -59.2, -49.7 and -80.6â¯mV/decade with detection limits of 5.6â¯×â¯10-5,5.9â¯×â¯10-5 and 13.2â¯×â¯10-5â¯mol/L for MIP/AM/DVB, MIP/MAA/DVB and MIP/EMA/EGDMA membrane based sensors, respectively. Good selectivity was observed over common inorganic/organic anions. Validation of the assay method according to IUPAC recommendations was justified ensuring the synthesis of good reliable novel sensors for DCP determination. The method was successfully applied for routine analysis of food taint in fish and fish farms water samples.
Assuntos
Clorofenóis/análise , Polímeros/química , Potenciometria/métodos , Acrilamida/química , Animais , Contaminação de Alimentos/análise , Limite de Detecção , Metacrilatos/química , Impressão Molecular , Polímeros/síntese química , Cloreto de Polivinila/química , Potenciometria/instrumentação , Alimentos Marinhos/análise , Poluentes Químicos da Água/análiseRESUMO
New accurate, sensitive and selective spectrophotometric and chemometric methods were developed and subsequently validated for determination of Imipenem (IMP), ciprofloxacin hydrochloride (CIPRO), dexamethasone sodium phosphate (DEX), paracetamol (PAR) and cilastatin sodium (CIL) in human urine. These methods include a new derivative ratio method, namely extended derivative ratio (EDR), principal component regression (PCR) and partial least-squares (PLS) methods. A novel EDR method was developed for the determination of these drugs, where each component in the mixture was determined by using a mixture of the other four components as divisor. Peak amplitudes were recorded at 293.0 nm, 284.0 nm, 276.0 nm, 257.0 nm and 221.0 nm within linear concentration ranges 3.00-45.00, 1.00-15.00, 4.00-40.00, 1.50-25.00 and 4.00-50.00 µg mL(-1) for IMP, CIPRO, DEX, PAR and CIL, respectively. PCR and PLS-2 models were established for simultaneous determination of the studied drugs in the range of 3.00-15.00, 1.00-13.00, 4.00-12.00, 1.50-9.50, and 4.00-12.00 µg mL(-1) for IMP, CIPRO, DEX, PAR and CIL, respectively, by using eighteen mixtures as calibration set and seven mixtures as validation set. The suggested methods were validated according to the International Conference of Harmonization (ICH) guidelines and the results revealed that they were accurate, precise and reproducible. The obtained results were statistically compared with those of the published methods and there was no significant difference.
Assuntos
Acetaminofen/urina , Analgésicos não Narcóticos/urina , Antibacterianos/urina , Anti-Inflamatórios/urina , Ciprofloxacina/urina , Dexametasona/análogos & derivados , Imipenem/urina , Dexametasona/urina , Humanos , Análise dos Mínimos Quadrados , Limite de Detecção , Análise Multivariada , Análise de Componente Principal , Espectrofotometria Ultravioleta/métodosRESUMO
Solid-liquid extraction, ultrasonic-assisted extraction and matrix solid-phase dispersion (MSPD) were optimized and compared in terms of recoveries for the simultaneous extraction of indole (IND) and 2,4-dichlorophenol (DCP) from catfish samples and for the extraction of IND alone from potato samples. Applying high-performance liquid chromatography (HPLC-DAD) procedure using mobile phase of methanol : water (65 : 35) at 280 nm, MSPD was the method of choice for the extraction of IND and DCP from catfish and, also, for IND from potato. The extraction recoveries of MSPD were in the range (97.9-99.7%) and (99.8-100.6%); for IND and DCP, respectively, in catfish samples and (98.4-99.7%) for IND alone in potato samples. Solid-phase extraction (SPE) was chosen the method of choice for the extraction of DCP from fish farms water samples after optimization and comparison with direct sample injection and extraction recoveries were in the range (97.9-100.3%). Kinetics were further studied to follow each of production of IND in catfish during storage at different temperatures and uptake of DCP by tilapia in fish farms water samples using MSPD-HPLC and SPE-HPLC, respectively.
Assuntos
Fracionamento Químico/métodos , Clorofenóis/isolamento & purificação , Cromatografia Líquida de Alta Pressão/métodos , Análise de Alimentos/métodos , Indóis/isolamento & purificação , Animais , Peixes-Gato , Clorofenóis/análise , Clorofenóis/farmacocinética , Contaminação de Alimentos/análise , Indóis/análise , Indóis/farmacocinética , Cinética , Limite de Detecção , Modelos Lineares , Reprodutibilidade dos Testes , Solanum tuberosum/químicaRESUMO
The construction and electrochemical response characteristics of poly (vinyl chloride) and poly (vinyl chloride) carboxylate membrane sensors for the determination of cyclophosphamide and ifosphamide are described. Based on the formation of an ion-pair complex between the drug cation and sodium tetraphenylborate, two poly (vinyl chloride) sensors, namely a cyclophosphamide membrane sensor and ifosphamide membrane sensor were fabricated. They show a linear response for both drugs over the concentration range 10(-2)-10(-4) M with cationic slopes of 56 and 54.6 mV per concentration decade, for sensor 1 and sensor 2, respectively. Based on the interaction between the drug solution and the dissociated COOH groups in the poly (vinyl chloride) carboxylate, sensor 3 was fabricated. It shows a linear response for both drugs over the concentration range 10(-3)-10(-5) M with a cationic slope of 49.7 mV per concentration decade. The direct potentiometric determination of cyclophosphamide and ifosphamide in their pharmaceutical preparations using the proposed sensors gave average recoveries of 101.3+/-0.6, 100.8+/-10.7 and 102.0+/-11.0% for the sensors 1, 2 and 3, respectively, which compares reasonably well with the data obtained using the British Pharmacopoeial method (1993). Sensors 1 and 2 were also used to follow up the stability of the drugs studied in the presence of their degradates. These degradation products have no diverse effect on the responses of sensors 1 and 2.
RESUMO
The construction and electrochemical response characteristics of poly (vinyl chloride) matrix membrane sensors for seven phenolic compounds (phenol, o-cresol, p-cresol, p-chlorophenol, o-nitrophenol, alpha-naphthol and beta-naphthol) are described. The membranes incorporate ion association complexes of these seven phenolic anions with phenanthroline-iron(II) as electroactive materials. These sensors show linear response for phenol, o-cresol, p-cresol, p-chlorophenol, o-nitrophenol, alpha-naphthol, and beta-naphthol over wide concentration ranges, with an average anionic slope 54.3 mV per concentration decade. The suggested sensors exhibit fast response time (1 min), low determination limits (1 x 10(-5)M), good stability (2-3 weeks), reasonable selectivity to phenolic compounds in the presence of other water pollutants. The average percentage recovery was 99.78+/-0.088 for individual phenolates and 99.61+/-0.198 for phenolates in mixtures. The investigated sensors were successfully used for direct potentiometric determination of traces of these phenolic compounds in wastewater samples. Results with mean accuracy of 99.74+/-0.29%, 99.82+/-0.36%, 99.65+/-0.47%, 99.73+/-0.37%, 99.77+/-0.30%, 99.86+/-0.31% and 99.91+/-0.22% was obtained for the seven sensors, respectively. These results were compared with data obtained using the British pharamacopial method (The British Pharmacopoeia, Her Majesty's Stationary Office, London, 1993) and others (Clarke's Isolation and Identification of Drugs in Pharmaceuticals Body Fluids and Post-mortem Materials, 2nd Edition, The Pharmaceutical Press, London, 1998).
Assuntos
Fenóis/análise , Cloreto de Polivinila/química , Eliminação de Resíduos Líquidos , Poluentes Químicos da Água/análise , Eletrodos , Membranas Artificiais , Sensibilidade e EspecificidadeRESUMO
Three reliable spectrophotometric and spectrofluorimetric procedures are described for the determination of fluorouracil in bulk powder and ampoules in the presence of its degradation products. One spectrophotometric procedure, based on measurement at 555 nm of the violet-coloured complex formed by fluorouracil with cobalt(II), has a detection limit of 0.03 mg mL(-1). Two sensitive spectrofluorimetric procedures are also proposed. One is based on measurement of the intrinsic fluorescence of the liberated fluorouracil at 375 nm, after precipitation as its cobalt(II) complex, decomposition of the precipitate with sulphuric acid and excitation at 295 nm. The second depends on excitation of the fluorouracil-cobalt(II) complex at 395 nm and measuring its fluorescence at 483 nm. The limits of detection of the two spectrofluorimetric procedures are 0.5 and 2 microg mL(-1), respectively. The three procedures have been used successfully for the determination of fluorouracil ampoules. The validity of the methods has been assessed by applying the standard addition technique.
Assuntos
Antimetabólitos Antineoplásicos/análise , Fluoruracila/análise , Antimetabólitos Antineoplásicos/química , Cobalto/química , Fluoruracila/química , Concentração de Íons de Hidrogênio , Sensibilidade e Especificidade , Espectrometria de Fluorescência , EspectrofotometriaRESUMO
New accurate, sensitive and selective spectrophotometric and spectrofluorimetric methods were developed and subsequently validated for determination of Cromolyn sodium (CS) and Oxymetazoline HCl (OXY) in binary mixture. These methods include 'H-point standard addition method (HPSAM) and area under the curve (AUC)' spectrophotometric method and first derivative synchronous fluorescence spectroscopic (FDSFS) method. For spectrophotometric methods, absorbances were recorded at 241.5nm and 274.9nm for HPSAM and the wavelength was selected in ranges 232.0-254.0nm and 216.0-229.0nm for AUC method, where the concentration was obtained by applying Cramer's rule. For FDSFS method, the first-derivative synchronous fluorescence signal was measured at 290.0nm, using Δλ=145.0nm. The suggested methods were validated according to International Conference of Harmonization (ICH) guidelines and the results revealed that they were precise and reproducible. All the obtained results were statistically compared with those of the reported method and there was no significant difference.
Assuntos
Agonistas alfa-Adrenérgicos/análise , Antiasmáticos/análise , Cromolina Sódica/análise , Oximetazolina/análise , Área Sob a Curva , Limite de Detecção , Reprodutibilidade dos Testes , Espectrometria de Fluorescência/métodos , Espectrofotometria/métodosRESUMO
A modified dispersive liquid-liquid extraction (DLLE) procedure coupled with spectrophotometric techniques was adopted for simultaneous determination of naphthalene, anthracene, benzo(a)pyrene, alpha-naphthol and beta-naphthol in water samples. Two different methods were used, partial least-squares (PLS) method and a new derivative ratio method, namely extended derivative ratio (EDR). A PLS-2 model was established for simultaneous determination of the studied pollutants in methanol, by using twenty mixtures as calibration set and five mixtures as validation set. Also, in methanol a novel (EDR) method was developed for determination of the studied pollutants, where each component in the mixture of the five PAHs was determined by using a mixture of the other four components as divisor. Chemometric and EDR methods could be also adopted for determination of the studied PAH in water samples after transferring them from aqueous medium to the organic one by utilizing dispersive liquid-liquid extraction technique, where different parameters were investigated using a full factorial design. Both methods were compared and the proposed method was validated according to ICH guidelines and successfully applied to determine these PAHs simultaneously in spiked water samples, where satisfactory results were obtained. All the results obtained agreed with those of published methods, where no significant difference was observed.