Rapid back flushed direct sample injection bio-analytical HPLC-UV method for therapeutic drug monitoring of terbinafine.

A rapid back flushed (BF) direct sample injection (DSI) high-performance liquid chromatography (HPLC) with UV detection (BF-DSI-HPLC-UV) has been developed to determine terbinafine (TERB) in human serum. For online solid phase extraction step, an isocratic mobile phase of phosphate buffer saline (pH 7.4) at 1 mL/min and a short protein-coated ODS column (PC-ODS-column) were used for the purification and enrichment of TERB. Two different chromatographic modes of PC-ODS-column were simultaneously operated. Macromolecular proteins were extracted by size-exclusion liquid chromatography, while TERB trapping and enrichment were achieved through reversed-phase liquid chromatography. The clear fraction containing TERB was transferred from the PC-ODS-column by BF mode onto the quantification step through a high pressure switching valve. An analytical mobile phase consisting of 80% methanol and 1% triethylamine in distilled deionized water (pH) 6 at 1 mL/min was used for the final separation on an ODS analytical column. TERB was quantified and detected by UV-detector at 224 nm. The proposed method showed high correlation coefficient (>0.999) over the concentrations range 4-1600 ng/mL with recoveries ranging from 98.48 to 93.86%. Measurement of TERB concentration in serum after administration of a single dose of 250 mg oral tablet was used to evaluate the applicability of the BF-DSI-HPLC-UV for pharmacokinetic study.

Single-Cell Metabolomics.

The dynamics of a cell is always changing. Cells move, divide, communicate, adapt, and are always reacting to their surroundings non-synchronously. Currently, single-cell metabolomics has become the leading field in understanding the phenotypical variations between them, but sample volumes, low analyte concentrations, and validating gentle sample techniques have proven great barriers toward achieving accurate and complete metabolomics profiling. Certainly, advanced technologies such as nanodevices and microfluidic arrays are making great progress, and analytical techniques, such as matrix-assisted laser desorption ionization (MALDI), are gaining popularity with high-throughput methodology. Nevertheless, live single-cell mass spectrometry (LCSMS) values the sample quality and precision, turning once theoretical speculation into present-day applications in a variety of fields, including those of medicine, pharmaceutical, and agricultural industries. While there is still room for much improvement, it is clear that the metabolomics field is progressing toward analysis and discoveries at the single-cell level.

Bio-analytical liquid chromatographic-based method with a mixed mode online solid phase extraction for drug monitoring of fluconazole in human serum.

A simple, cost-effective and sensitive liquid chromatography-based bio-analytical method has been developed and validated for therapeutic drug monitoring of fluconazole (FLUC) in human serum. Integration of online mixed-mode solid-phase extraction (SPE) into the analytical system was the key for direct injection of untreated serum samples. A short protein-coated (PC) µBondapak CN silica column (PC-µB-CN-column) as a SPE tool and phosphate buffer saline (PBS) (pH 7.4) as an eluent were applied in the extraction step. PC-µB-CN-column operates in two different chromatographic modes. Using PBS, proteins were extracted from serum samples by size-exclusion liquid chromatography, while FLUC trapping was reversed-phase liquid chromatography dependent. FLUC was then eluted from the PC-µB-CN-column onto the quantification position using a mixture of acetonitrile-distilled deionized water (20:80, v/v) as an eluent and ODS analytical column. FLUC was separated at ambient temperature (22 ± 1 °C) and detected at 260 nm. The method was linear over the range of 200-10000 ng/mL. FLUC recovery in untreated serum samples ranged from 97.8 to 98.8% and showed good accuracy and precision. The reliability of the developed method was evaluated by studying the pharmacokinetic profile of FLUC in humans after an oral administration of a single 150 mg tablet.

Direct infusion nano-electrospray ionization mass spectrometry for therapeutic drug monitoring of ciprofloxacin and its metabolites in human saliva.

A rapid and sensitive method based on direct infusion-nano-electrospray ionization mass spectrometry (DI-nESI-MS) has been developed for the detection and quantification of ciprofloxacin and its metabolites in human saliva. Saliva samples were collected after the oral administration of 500 mg ciprofloxacin tablets. Internal standard (IS), tamoxifen, was added to the collected samples, and then diluted with the ionization solvent, centrifuged and filtered. An aliquot of 4 µL of the filtrate was loaded into a nanospray (NS) capillary. The NS capillary was then fitted into an off-line ion source and the instrument was operated to acquire a two-minute run by applying a voltage of 1000 V (positive-ion detection mode). Quantification of ciprofloxacin relied on the ratio of its peak intensity to the IS peak intensity. The DI-nESI-MS method was validated and provided satisfactory precision with relative standard deviation ranging from 0.39 to 7.48 % and accuracy with relative error ranging from -2.12 to 9.72 %. The calibration curve showed good linearity (r2) > 0.999 over the concentration range of 10-4000 ng/mL. These results verify the effectiveness of the DI-nESI-MS method for monitoring of ciprofloxacin and its metabolites in human saliva samples.

Validation and application of chemometrics-assisted spectrophotometry and liquid chromatography for simultaneous determination of two ternary mixtures containing drotaverine hydrochloride.

Three methods were developed for the determination of two ternary mixtures containing drotaverine hydrochloride (DR) with caffeine and paracetamol (mixture 1) and DR with metronidazole and diloxanide furoate (mixture 2). The first method depends on HPLC separation on an RP C18 column at ambient temperature with the mobile phase methanol-water, pH 3.1 (50 + 50, v/v) and UV detection at 213 nm for mixture 1, and the mobile phase acetonitrile-25 mM potassium dihydrogen phosphate, pH 4.6 (55 + 45, v/v) with UV detection at 235 nm for mixture 2. The other two chemometric methods applied were partial least squares (PLS-1) and principal component regression (PCR). These approaches were successfully applied to quantify the five drugs in two ternary mixtures using information included in the UV absorption spectra of appropriate solutions in the wavelength range of 210-300 nm with 1 nm intervals. Calibration of PCR and PLS-1 models was evaluated by internal validation (prediction of compounds in its own designed training set of calibration), by cross-validation (obtaining statistical parameters that show the efficiency for a calibration fit model), and by external validation (using laboratory-prepared mixtures and pharmaceutical preparations). The proposed methods were successfully applied for the determination of the two ternary combinations in laboratory-prepared mixtures and commercial tablets; the results of PLS-1 and PCR methods were compared with the HPLC method, and a good agreement was found.

Integration of Solid-Phase Extraction and Reversed-Phase Chromatography in Single Protein-Coated Columns for Direct Injection of Bupivacaine in Human Serum.

A rapid, reliable and precise integrated solid-phase extraction (SPE) and reversed-phase liquid chromatography method was developed and validated to determine bupivacaine in human serum using single protein-coated analytical columns. The protein-coated columns were packed with four different sorbents: TSK-ODS, LiChrosorb RP-8, LiChrosorb RP-2 and µ-Bondapak CN-bonded silica. The method involved direct injection of serum sample onto the columns for trapping of the analyte, clean-up from weakly retained serum endogenous components, as well as the final separation. The protein-coated columns operated in two different chromatographic modes. Serum proteins were extracted and cleaned up by SPE, whereas the final separation of bupivacaine was based on reversed-phase chromatography. The protein-coated TSK-ODS column resulted in more accurate peak integration and more reproducible results. A linear relationship between the concentrations of drug and peak areas was confirmed in the range of 100-2000 ng/mL. Detection and quantification limits were 24.85 and 85.36 ng/mL, respectively. The average recovery for bupivacaine ranged from 96.48% to 98.81%. The present methodology was successfully applied, with a high degree of confidence, to analyze clinical samples obtained from patient receiving 0.5% bupivacaine therapy.

Dilute-and-shoot-based direct nano-electrospray ionization tandem mass spectrometry as screening methodology for multivitamins in dietary supplement and human urine.

INTRODUCTION: In recent years, analytical screening methods for simultaneous detection of multivitamins have gained substantial attention to ensure quality and public confidence in dietary supplements. Even so, few analytical methods have been proposed for simultaneous analysis of multivitamin constituents due to the large divergence in chemical characteristics. OBJECTIVES: In the present study, the objective was to develop a simple and rapid direct nano-electrospray ionization-tandem mass spectrometry (DI-nano-ESI-MS/MS) method for targeted detection of water soluble vitamins, fat soluble vitamins, amino acids, royal jelly, ginkgo biloba, and ginseng in a dietary supplement. The applicability of dilute-and-shoot-based DI-nano-ESI-MS/MS to analyze the same tested compounds and their related metabolites in clinical samples was also examined. METHODS: Intact urine mixed with the ionization solvent was loaded (4-µL aliquot) into a nanospray (NS) capillary of 1-µm tip diameter. The NS capillary was then fitted into an off-line ion source at a distance of 5 mm from MS aperture. The sample was directly injected by applying a voltage of 1.1 kV, producing a numerous of m/z peaks for analysis in mere minutes. RESULTS: The DI-nano-ESI-MS/MS method successfully identified almost all dietary supplement components, as well as a plethora of component-related metabolites in clinical samples. In addition, a new merit of the proposed method for the detection of index marker and chemical contaminants as well as subspecies identification was investigated for further quality evaluation of the dietary supplement. CONCLUSIONS: The previous findings illustrated that DI-nano-ESI-MS/MS approach can emerge as a powerful, high throughput, and promising analytical tool for screening and accurate detection of various pharmaceuticals and ingredient in dietary supplements as well as biological fluids.

Sensitivity Enhancement for Direct Injection Capillary Electrophoresis to Determine Morphine in Human Serum via In-capillary Derivatization.

Rapid and simple micellar electrokinetic chromatography (MEKC) with in-capillary derivatization and fluorescence detection has been developed to determine morphine in human serum. The sample was introduced into a background electrolyte (BGE) containing potassium ferricyanide, whereas morphine was oxidized into highly fluorescent product, pseudomorphine. Different parameters for derivatization and subsequent separation were systematically investigated for the analysis of morphine in serum. Efficient performance of the developed MEKC system was carried out in a single run using BGE made up of 70 mM sodium tetraborate decahydrate (pH 10.5), 0.30 mM potassium ferrricyanide, 80 mM sodium dodecyl sulfate, and applied voltage of 9 kV. The combination of MEKC with in-capillary derivatization of morphine was successfully achieved with a high degree of sensitivity. The validation of the method showed good linearity between areas of morphine and the corresponding concentrations over the range of 5-5000 ng/mL. Excellent accuracy and precision were obtained at all concentration levels. The mean recoveries of morphine were ranging from 83.86 to 94.45%. The validated MEKC method successfully permitted determination of morphine in clinical samples after a single oral dose of controlled release morphine sulfate tablets.

Direct nano-electrospray ionization tandem mass spectrometry for the quantification and identification of metronidazole in its dosage form and human urine.

A rapid, sensitive and direct nano-electrospray ionization-tandem mass spectrometry (NS-ESI-MS/MS) method, using an offline nanospray (NS) capillary, has been developed and validated for the analysis of metronidazole (MTZ). A mixture of 2 µl MTZ sample solution prepared in an ionization solvent consisting of methanol : water : formic acid in a ratio of 80 : 20 : 0.3, together with 2 µl of an internal standard (IS), 1,3,6-polytyrosine, is loaded into the back of the NS capillary. The NS capillary was fitted into the ion source at a distance of 3 mm between the NS tip and MS orifice. The sample is then analysed and acquired a sustainable signal that allowed for data compilation across various data points for MTZ identification and quantification. The quantification relied on the ratio of the [M + H]+ peaks of MTZ and IS with m/z values of 172.0717 and 182.0812, respectively, while the identification relied on the MS/MS of the precursor ions [M + H]+ of both compounds and their fragments at 128.05 for MTZ and 165.1 and 136.07 for the IS. The NS-ESI-MS/MS method was accurate and precise for the quantification of MTZ over the concentration range from 2.5 to 25 000 ng ml-1. The applicability of the method was confirmed by MTZ analysis in its pharmaceutical dosage form and detection of the analyte in clinical human urine samples without any sample treatment procedure.

Development and validation of chemometrics-assisted spectrophotometric and liquid chromatographic methods for the simultaneous determination of two multicomponent mixtures containing bronchodilator drugs.

Three methods are developed for the determination of two multicomponent mixtures containing guaiphenesine (GU) with salbutamol sulfate (SL), methylparaben (MP) and propylparaben (PP) [mixture 1]; and acephylline piperazine (AC) with bromhexine hydrochloride (BX), methylparaben (MP) and propylparaben (PP) [mixture 2]. The resolution of the two multicomponent mixtures has been accomplished by using numerical spectrophotometric methods such as partial least squares (PLS-1) and principal component regression (PCR) applied to UV absorption spectra of the two mixtures. In addition HPLC method was developed using a RP 18 column at ambient temperature with mobile phase consisting of acetonitrile-0.05 M potassium dihydrogen phosphate, pH 4.3 (60:40, v/v), with UV detection at 243 nm for mixture 1, and mobile phase consisting of acetonitrile-0.05 M potassium dihydrogen phosphate, pH 3 (50:50, v/v), with UV detection at 245 nm for mixture 2. The methods were validated in terms of accuracy, specificity, precision and linearity in the range of 20-60 microg ml(-1) for GU, 1-3 microg ml(-1) for SL, 20-80 microg ml(-1) for AC, 0.2-1.8 microgml(-1) for PP and 1-5 microg ml(-1) for BX and MP. The proposed methods were successfully applied for the determination of the two multicomponent combinations in laboratory prepared mixtures and commercial syrups.

Stability-indicating method for determination of oxyphenonium bromide and its degradation product by high-performance liquid chromatography.

A high-performance liquid chromatographic (HPLC) method was developed for determination of oxyphenonium bromide (OX) and its degradation product. The method was based on the HPLC separation of OX from its degradation product, using a cyanopropyl column at ambient temperature with mobile phase of acetonitrile-25 mM potassium dihydrogen phosphate, pH 3.4 (50 + 50, v/v). UV detection at 222 nm was used for quantitation based on peak area. The method was applied to the determination of OX and its degradation product in tablets. The proposed method was also used to investigate the kinetics of the acidic and alkaline degradation of OX at different temperatures, and the apparent pseudo first-order rate constant, half-life, and activation energy were calculated. The pH-rate profile of the degradation of OX in Britton-Robinson buffer solutions within the pH range 2-12 was studied.

UV partial least-squares calibration and liquid chromatographic methods for direct quantitation of levofloxacin in urine.

Levofloxacin was determined in human urine samples by application of a spectrophotometric multivariate calibration partial least-squares (PLS-1) method. A calibration set consisting of standards was prepared by using a multilevel multifactor experimental design. In order to ensure accurate results, the calibration matrix included a urine sample free of levofloxacin (i.e., urine blank). The components of the calibration matrix were levofloxacin and urine. The concentration of levofloxacin ranged from 0.5 to 16.5 microg/mL. Different urine concentrations were used as the second component of the calibration matrix in order to include the information inherent in the changes in the UV spectrum for urine upon dilution. In addition, a high-performance liquid chromatographic method was proposed. In this method, a Shim-pack amino column was used at ambient temperature with a mobile phase of 25 mM potassium dihydrogen phosphate (pH adjusted to 3.1 with phosphoric acid)-acetonitrile (70 + 30, v/v), and the flow rate was 1 mL/min. UV detection at 293 nm was used for quantitation. The proposed methods were applied to the determination of the dissolution rate for tablets containing levofloxacin. The urinary excretion pattern for the cumulative amount of levoflacin excreted was also calculated.

Direct injection liquid chromatographic technique for simultaneous determination of two antihistaminic drugs and their main metabolites in serum.

A very simple liquid chromatographic technique was developed and validated for the simultaneous determination of 2 antihistaminic drugs, loratadine (LT) and terfenadine (TR), and their major active metabolites, desloratadine (DL) and fexofenadine (FX), respectively, in human serum. LT, DL, TR, and FX from directly injected serum samples were enriched on a protein-coated RP8 silica precolumn (10 x 4.6 mm id) while serum constituents, such as proteins and salts, were eluted to waste. Using an online column-switching system, the drugs and their metabolites were quantitatively transferred and separated on a second analytical column (Shim-pack 5 microm particle size cyanopropyl, 250 x 4.6 mm id) followed by ultraviolet detection at 243 nm for LT and DL and 220 nm for TR and FX. Very good precision, accuracy, and linearity were obtained over the range of 10-1000 ng/mL for LT and DL, 10-500 ng/mL for TR, and 10-3000 ng/mL for FX in human serum. High extraction recoveries from serum ranging from 96.03 to 98.19, 95.44 to 97.26, 95.61 to 98.17, and 95.60 to 97.89 for LT, DL, TR, and FX, respectively, were obtained.

Application and validation of chemometrics-assisted spectrophotometry and liquid chromatography for the simultaneous determination of six-component pharmaceuticals.

Three methods are developed for the simultaneous determination of theophylline anhydrous (TH), guaiphenesin (GP), diphenhydramine hydrochloride (DP), methylparaben (MP), propylparaben (PP) and sodium benzoate (BZ) in pharmaceutical syrup. The chromatographic method depends on a high performance liquid chromatographic separation on a reversed-phase C(18) column at ambient temperature with mobile phase consisting of 25 mM KH2PO4, pH 3.2-acetonitrile (60:40, v/v). Quantitation was achieved with UV detection at 222 nm based on peak area. The other two chemometric methods applied were partial least squares (PLS-1) and principal component regression (PCR). These approaches were successfully applied to quantify the six components in the studied mixture using information included in the UV absorption spectra of appropriate solutions in the wavelength range of 220-270 nm with Deltalambda=0.4 nm. The calibration PLS-1 and PCR models were evaluated by internal validation (prediction of compounds in its own designed training set of calibration), by cross-validation (obtaining statistical parameters that show the efficiency for a calibration fit model) and by external validation over synthetic and pharmaceutical preparation. The results of PLS-1 and PCR methods were compared with the HPLC method and a good agreement was found.

Liquid chromatography determination of citalopram enantiomers using beta-cyclodextrin as a chiral mobile phase additive.

A reliable and specific method for the determination of citalopram enantiomers was developed and validated. Chromatographic resolution of citalopram enantiomers was made on a Shim-pack (5 microm particle size) cyanopropyl column with beta-cyclodextrin (beta-CD) as an effective chiral mobile phase additive. The composition of the mobile phase was (90 + 10, v/v) aqueous 0.1% triethylammonium acetate buffer, pH 4.0 (adjusted with acetic acid), and acetonitrile, containing 12 mM beta-CD. The flow rate was 0.8 mL/min with ultraviolet detection at 240 nm. The effects of the mobile phase composition, concentration of beta-CD, and pH of the triethylammonium acetate buffer on peak shape and resolution of the enantiomers were investigated. The calibration graphs were linear (r = 0.9999, n = 8) in the range of 1-40 microg/mL for S(+) citalopram and R-(-) citalopram. The limit of detection values were 5.51 x 10(-3) and 4.35 x 10(-3) pg/mL, while the limit of quantification values were found to be 1.84 x 10(-2) and 1.45 x 10(-2) microg/mL for S-(+) citalopram and R-(-) citalopram, respectively.

Quantitative Live Single-cell Mass Spectrometry with Spatial Evaluation by Three-Dimensional Holographic and Tomographic Laser Microscopy.

The locations and volumes of the contents of a single HepG2 cell were visualized under three-dimensional (3D) holographic and tomographic (HT) laser microscopy, colored by refractive index, not staining. After trapping the specific area of a target cell in a nanospray tip, quantification was performed by live single-cell mass spectrometry. Comparison of the HepG2 cells' before and after 3D-HT images allowed the inference of the precise volume and original location of the trapped cell contents. The total amount of a trapped molecule was estimated. The images also revealed morphological changes in the cell structure caused by the manipulation.

Liquid chromatography and chemometric-assisted spectrophotometric methods for the analysis of two multicomponent mixtures containing cough suppressant drugs.

Three methods were applied for the analysis of 2 multicomponent mixtures containing dextromethorphan hydrobromide, phenylephrine hydrochloride, chlorpheniramine maleate, methylparaben, and propylparaben, together with either sodium benzoate (Mix 1) or ephedrine hydrochloride and benzoic acid (Mix 2). In the first method, liquid chromatography was used for their simultaneous determination using an ODS column with a mobile phase consisting of acetonitrile-phosphate buffer, pH 2.7 (40 + 60, v/v), containing 5mM heptanesulfonic acid sodium salt and ultraviolet (UV) detection at 214 nm. Also, 2 chemometric methods, principal component regression, and partial least squares were used. For both chemometric calibrations, a concentration set of the mixture consisting of each compound in each mixture was prepared in distilled water. The absorbance data in the UV spectra were measured for the 76 or 71 wavelength points in the spectral region 210-240 or 210-224 nm considering the intervals of deltagamma = 0.4 or 0.2 nm for Mix 1 and Mix 2, respectively. The 2 chemometric methods did not require any separation step. These methods were successfully applied for the analysis of the 2 multicomponent combinations in synthetic mixtures and in commercial syrups, and the results were compared with each other.

HPLC and chemometric-assisted spectrophotometric methods for simultaneous determination of atenolol, amiloride hydrochloride and chlorthalidone.

Three methods are presented for the simultaneous determination of atenolol (AT), amiloride hydrochloride (AM) and chlorthalidone (CD). The high performance liquid chromatographic (HPLC) method depends on the separation of each drug on a reversed phase, RP (18) column. Elution was carried out with a mobile phase consisting of acetonitrile -5mM heptansulphonic acid sodium salt (20:80, v/v, pH 4.4). Quantitation was achieved with UV detection at 274 nm based on peak area. The other two-chemometric-assisted spectrophotometric methods applied were principal component regression (PCR) and partial least squares (PLS-1). These approaches were successfully applied to quantify each drug in the mixture using the information included in the absorption spectra of appropriate solutions in the range 240-290 nm with the intervals Deltalambda=0.2 nm. The three methods were successfully applied to a pharmaceutical formulation (tablets), and the results were compared with each other.

Spectrophotometric and liquid chromatographic determination of fenofibrate and vinpocetine and their hydrolysis products.

Several spectrophotometric and HPLC methods are presented for the determination of fenofibrate, vinpocetine and their hydrolysis products. The resolution of either fenofibrate or vinpocetine and their hydrolysis products has been accomplished by using numerical spectrophotometric methods as partial least squares (PLS-1) and principal component regression (PCR) applied to UV spectra; and graphical spectrophotometric methods as first derivative of ratio spectra (1DD) or first (1D) and second (2D) derivative spectrophotometry for vinpocetine and fenofibrate, respectively. In addition HPLC methods were developed using ODS column with mobile phase consisting of acetonitrile-water (80:20, v/v, pH 4) with UV detection at 287 nm for fenofibrate and a mobile phase consisting of acetonitrile-10 mM KH2PO4, containing 0.1% diethylamine (60:40, v/v, pH 4.6) with UV detection at 270 nm for vinpocetine. The proposed methods were successfully applied for the determination of each drug and its hydrolysis product in laboratory-prepared mixture and pharmaceutical preparation. The proposed HPLC and derivative spectrophotometric methods were used to investigate the kinetics of acidic and alkaline hydrolytic processes of each drug. The pH-rate profile of hydrolysis of each drug in Britton-Robinson buffer solutions was studied.

An Eco-Friendly Direct Injection HPLC Method for Methyldopa Determination in Serum by Mixed-Mode Chromatography Using a Single Protein-Coated Column.

A simple, rapid and environment-friendly direct injection HPLC method for the determination of methyldopa (MTD) in human serum has been developed and validated. The method was based on cleanup and separation of MTD from serum by mixed-mode liquid chromatography using a single protein-coated TSK gel ODS-80 TM analytical column (50 × 4.0 mm i.d., 5 µm). The protein-coated column exhibited excellent resolution, selectivity and functioned in two chromatographic modes: size-exclusion chromatography [i.e., solid-phase extraction (SPE) for serum proteins] and reversed-phase chromatography for the final separation of MTD. SPE and HPLC separation were carried out simultaneously with a green mobile phase consisting of acetate buffer (0.1 M, pH 2.4) at a flow rate of 1 mL/min and at room temperature (23 ± 1°C). The eluent was monitored at emission and excitation wavelengths of 320 and 270 nm, respectively. A calibration curve was linear over the range of 0.1-30 µg/mL with a detection limit of 0.027 µg/mL. This online SPE method was successfully applied to real samples obtained from patients receiving MTD therapy.